Ticket #1069: pcbsd-install-debug.log

File pcbsd-install-debug.log, 18.4 KB (added by nebbit, 4 months ago)
Line 
1# PC-SYSINSTALL LOG
2kern.geom.debugflags: 0 -> 16
3Deleting all gparts
4Running: gpart delete -i 1 /dev/ada0
5ada0p1 deleted
6Running: gpart destroy /dev/ada0
7ada0 destroyed
8Clearing gpt backup table location on disk
9Running: dd if=/dev/zero of=/dev/ada0 bs=1m count=1
101+0 records in
111+0 records out
121048576 bytes transferred in 0.127087 secs (8250844 bytes/sec)
13Running: dd if=/dev/zero of=/dev/ada0 bs=1m oseek=476936
14dd: /dev/ada0: short write on character device
15dd: /dev/ada0: end of device
165+0 records in
174+1 records out
184218880 bytes transferred in 0.041849 secs (100812213 bytes/sec)
19Running: dd if=/dev/zero of=/dev/ada0 count=3000
203000+0 records in
213000+0 records out
221536000 bytes transferred in 0.352595 secs (4356275 bytes/sec)
23Running gpart on /dev/ada0
24Running: gpart create -s GPT /dev/ada0
25ada0 created
26Running: gpart add -b 34 -s 1M -t bios-boot /dev/ada0
27ada0p1 added
28Looping through _zvars: /dev/ada0p2
29Looping through _zvars: /dev/ada1
30Setting up ZFS disk /dev/ada1
31kern.geom.debugflags: 16 -> 16
32Deleting all gparts
33Running: gpart delete -i 1 /dev/ada1
34ada1p1 deleted
35Running: gpart destroy /dev/ada1
36ada1 destroyed
37Clearing gpt backup table location on disk
38Running: dd if=/dev/zero of=/dev/ada1 bs=1m count=1
391+0 records in
401+0 records out
411048576 bytes transferred in 0.359675 secs (2915344 bytes/sec)
42Running: dd if=/dev/zero of=/dev/ada1 bs=1m oseek=476936
43dd: /dev/ada1: short write on character device
44dd: /dev/ada1: end of device
455+0 records in
464+1 records out
474218880 bytes transferred in 0.043916 secs (96067065 bytes/sec)
48Running: dd if=/dev/zero of=/dev/ada1 count=3000
493000+0 records in
503000+0 records out
511536000 bytes transferred in 0.652453 secs (2354193 bytes/sec)
52Running gpart on /dev/ada1
53Running: gpart create -s GPT /dev/ada1
54ada1 created
55Running: gpart add -b 34 -s 1M -t bios-boot /dev/ada1
56ada1p1 added
57Looping through _zvars: /dev/ada2
58Setting up ZFS disk /dev/ada2
59kern.geom.debugflags: 16 -> 16
60Deleting all gparts
61Running: gpart destroy /dev/ada2
62gpart: arg0 'ada2': Invalid argument
63Clearing gpt backup table location on disk
64Running: dd if=/dev/zero of=/dev/ada2 bs=1m count=1
651+0 records in
661+0 records out
671048576 bytes transferred in 0.349667 secs (2998784 bytes/sec)
68Running: dd if=/dev/zero of=/dev/ada2 bs=1m oseek=476936
69dd: /dev/ada2: short write on character device
70dd: /dev/ada2: end of device
715+0 records in
724+1 records out
734218880 bytes transferred in 0.044252 secs (95337787 bytes/sec)
74Running: dd if=/dev/zero of=/dev/ada2 count=3000
753000+0 records in
763000+0 records out
771536000 bytes transferred in 0.677428 secs (2267400 bytes/sec)
78Running gpart on /dev/ada2
79Running: gpart create -s GPT /dev/ada2
80ada2 created
81Running: gpart add -b 34 -s 1M -t bios-boot /dev/ada2
82ada2p1 added
83Running: gpart add -a 4k -s 474930M -t freebsd-zfs /dev/ada0
84ada0p2 added
85Cloning disk layout to ZFS disk /dev/ada1
86Running: gpart add -a 4k -s 474930M -t freebsd-zfs /dev/ada1
87ada1p2 added
88Cloning disk layout to ZFS disk /dev/ada2
89Running: gpart add -a 4k -s 474930M -t freebsd-zfs /dev/ada2
90ada2p2 added
91Running: gpart add -a 4k -s 2000M -t freebsd-swap /dev/ada0
92ada0p3 added
93Cloning disk layout to ZFS disk /dev/ada1
94Running: gpart add -a 4k -s 2000M -t freebsd-swap /dev/ada1
95ada1p3 added
96Cloning disk layout to ZFS disk /dev/ada2
97Running: gpart add -a 4k -s 2000M -t freebsd-swap /dev/ada2
98ada2p3 added
99Running: gpart bootcode -p /boot/gptzfsboot -i 1 /dev/ada0
100gpart: No such geom: /dev/ada0.
101EXITERROR: Error 1: gpart bootcode -p /boot/gptzfsboot -i 1 /dev/ada0
102Running: swapoff /dev/ada0p3
103swapoff: /dev/ada0p3: Invalid argument
104Unmounting: /mnt
105Running: umount -f /mnt
106umount: /mnt: not a file system root directory
107
108# PC-SYSINSTALL CFG
109# Auto-Generated pc-sysinstall configuration
110installInteractive=no
111installMode=fresh
112installType=PCBSD
113packageType=dist
114distFiles=base doc games kernel lib32
115
116netSaveDev=AUTO-DHCP-SLAAC
117installMedium=local
118localPath=/dist
119 
120# Disk Setup for ada0
121disk0=ada0
122partition=ALL
123bootManager=GRUB
124partscheme=GPT
125commitDiskPart
126
127# Partition Setup for ada0(ALL)
128# All sizes are expressed in MB
129# Avail FS Types, UFS, UFS+S, UFS+SUJ, UFS+J, ZFS, SWAP
130# UFS.eli, UFS+S.eli, UFS+SUJ, UFS+J.eli, ZFS.eli, SWAP.eli
131disk0-part=ZFS 474930 /,/tmp(compress=lz4),/usr(canmount=off),/usr/home(compress=lz4),/usr/jails(compress=lz4),/usr/obj(compress=lz4),/usr/pbi(compress=lz4),/usr/ports(compress=lz4),/usr/ports/distfiles(compress=lz4),/usr/src(compress=lz4),/var(canmount=off),/var/audit(compress=lz4),/var/log(compress=lz4),/var/tmp(compress=lz4) (mirror: ada1 ada2)
132disk0-part=SWAP 2000 none
133commitDiskLabel
134
135runExtCommand=/root/save-config.sh
136
137installPackages=pcbsd-base pcbsd-meta-kde pcbsd-meta-kde-accessibility pcbsd-meta-kde-artwork pcbsd-meta-kde-graphics pcbsd-meta-kde-multimedia pcbsd-meta-kde-network pcbsd-meta-kde-pim pcbsd-meta-nvidia
138
139runCommand=sh /usr/local/share/pcbsd/scripts/sys-init.sh desktop en_US
140# Touch flags to enable PC-BSD setup at first boot
141runCommand=touch /var/.runxsetup
142runCommand=touch /var/.pcbsd-firstboot
143runCommand=touch /var/.pcbsd-firstgui
144runCommand=newaliases
145
146# DMESG OUTPUT
147Copyright (c) 1992-2014 The FreeBSD Project.
148Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
149        The Regents of the University of California. All rights reserved.
150FreeBSD is a registered trademark of The FreeBSD Foundation.
151FreeBSD 10.0-RELEASE-p5 #8 b261212(releng/10.0): Fri Jan 24 11:21:56 EST 2014
152    root@avenger:/usr/obj/root/pcbsd-build10.0/git/freebsd/sys/GENERIC amd64
153FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
154CPU: AMD Athlon(tm) II X2 250 Processor (3000.06-MHz K8-class CPU)
155  Origin = "AuthenticAMD"  Id = 0x100f62  Family = 0x10  Model = 0x6  Stepping = 2
156  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
157  Features2=0x802009<SSE3,MON,CX16,POPCNT>
158  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
159  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
160  TSC: P-state invariant
161real memory  = 6979321856 (6656 MB)
162avail memory = 5931761664 (5656 MB)
163Event timer "LAPIC" quality 400
164ACPI APIC Table: <041311 APIC1110>
165FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
166FreeBSD/SMP: 1 package(s) x 2 core(s)
167 cpu0 (BSP): APIC ID:  0
168 cpu1 (AP): APIC ID:  1
169ioapic0 <Version 1.1> irqs 0-23 on motherboard
170random: <Software, Yarrow> initialized
171kbd1 at kbdmux0
172acpi0: <041311 RSDT1110> on motherboard
173acpi0: Power Button (fixed)
174acpi0: reservation of fee01000, ff000 (3) failed
175acpi0: reservation of fec00000, 1000 (3) failed
176acpi0: reservation of fee00000, 1000 (3) failed
177acpi0: reservation of 0, a0000 (3) failed
178acpi0: reservation of 100000, dff00000 (3) failed
179cpu0: <ACPI CPU> on acpi0
180cpu1: <ACPI CPU> on acpi0
181hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff irq 2,8 on acpi0
182Timecounter "HPET" frequency 25000000 Hz quality 950
183attimer0: <AT timer> port 0x40-0x43 on acpi0
184Timecounter "i8254" frequency 1193182 Hz quality 0
185Event timer "i8254" frequency 1193182 Hz quality 100
186atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
187Event timer "RTC" frequency 32768 Hz quality 0
188Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
189acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
190pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
191pci0: <ACPI PCI bus> on pcib0
192pci0: <memory, RAM> at device 0.0 (no driver attached)
193isab0: <PCI-ISA bridge> port 0x2f00-0x2fff at device 1.0 on pci0
194isa0: <ISA bus> on isab0
195pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
196pci0: <memory, RAM> at device 1.2 (no driver attached)
197pci0: <processor> at device 1.3 (no driver attached)
198pci0: <memory, RAM> at device 1.4 (no driver attached)
199ohci0: <OHCI (generic) USB controller> mem 0xfae7e000-0xfae7efff irq 22 at device 2.0 on pci0
200usbus0 on ohci0
201ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfae7fc00-0xfae7fcff irq 23 at device 2.1 on pci0
202usbus1: EHCI version 1.0
203usbus1 on ehci0
204ohci1: <OHCI (generic) USB controller> mem 0xfae7d000-0xfae7dfff irq 20 at device 4.0 on pci0
205usbus2 on ohci1
206ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfae7f800-0xfae7f8ff irq 21 at device 4.1 on pci0
207usbus3: EHCI version 1.0
208usbus3 on ehci1
209atapci0: <nVidia nForce MCP77 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
210ata0: <ATA channel> at channel 0 on atapci0
211ata1: <ATA channel> at channel 1 on atapci0
212hdac0: <NVIDIA MCP78 HDA Controller> mem 0xfae78000-0xfae7bfff irq 22 at device 7.0 on pci0
213pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
214pci1: <ACPI PCI bus> on pcib1
215ahci0: <NVIDIA MCP77 AHCI SATA controller> port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem 0xfae76000-0xfae77fff irq 23 at device 9.0 on pci0
216ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
217ahci0: quirks=0x200<NOAA>
218ahcich0: <AHCI channel> at channel 0 on ahci0
219ahcich1: <AHCI channel> at channel 1 on ahci0
220ahcich2: <AHCI channel> at channel 2 on ahci0
221ahcich3: <AHCI channel> at channel 3 on ahci0
222ahcich4: <AHCI channel> at channel 4 on ahci0
223ahcich5: <AHCI channel> at channel 5 on ahci0
224nfe0: <NVIDIA nForce MCP77 Networking Adapter> port 0xc880-0xc887 mem 0xfae7c000-0xfae7cfff,0xfae7f400-0xfae7f4ff,0xfae7f000-0xfae7f00f irq 20 at device 10.0 on pci0
225miibus0: <MII bus> on nfe0
226e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
227e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
228nfe0: Ethernet address: 00:26:18:91:99:c3
229pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
230pci2: <ACPI PCI bus> on pcib2
231vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xfb000000-0xfbffffff,0xf0000000-0xf7ffffff,0xf8000000-0xf9ffffff irq 21 at device 0.0 on pci2
232vgapci0: Boot video device
233pcib3: <ACPI PCI-PCI bridge> irq 16 at device 16.0 on pci0
234pci3: <ACPI PCI bus> on pcib3
235pcib4: <ACPI PCI-PCI bridge> irq 17 at device 19.0 on pci0
236pci4: <ACPI PCI bus> on pcib4
237pcib5: <ACPI PCI-PCI bridge> irq 18 at device 20.0 on pci0
238pci5: <ACPI PCI bus> on pcib5
239acpi_button0: <Power Button> on acpi0
240uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
241sc0: <System console> at flags 0x100 on isa0
242sc0: VGA <16 virtual consoles, flags=0x300>
243vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
244atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
245atkbd0: <AT Keyboard> irq 1 on atkbdc0
246kbd0 at atkbd0
247atkbd0: [GIANT-LOCKED]
248ppc0: cannot reserve I/O port range
249hwpstate0: <Cool`n'Quiet 2.0> on cpu0
250Timecounters tick every 1.000 msec
251hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0
252hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0
253pcm0: <VIA VT1708S_0 (Analog 7.1+HP/2.0)> at nid 28,34,25,35,29 and 26,31,27 on hdaa0
254pcm1: <VIA VT1708S_0 (Rear-panel Digital)> at nid 32 on hdaa0
255pcm2: <VIA VT1708S_0 (Rear-panel Digital)> at nid 33 on hdaa0
256hdacc1: <NVIDIA MCP78 HDA CODEC> at cad 3 on hdac0
257hdaa1: <NVIDIA MCP78 Audio Function Group> at nid 1 on hdacc1
258pcm3: <NVIDIA MCP78 (Digital)> at nid 5 on hdaa1
259random: unblocking device.
260usbus0: 12Mbps Full Speed USB v1.0
261usbus1: 480Mbps High Speed USB v2.0
262usbus2: 12Mbps Full Speed USB v1.0
263usbus3: 480Mbps High Speed USB v2.0
264ugen0.1: <nVidia> at usbus0
265uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
266ugen2.1: <nVidia> at usbus2
267uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
268ugen1.1: <nVidia> at usbus1
269uhub2: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
270ugen3.1: <nVidia> at usbus3
271uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
272uhub0: 6 ports with 6 removable, self powered
273uhub1: 6 ports with 6 removable, self powered
274ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
275ada0: <ST3500630NS 3.BJH> ATA-7 SATA 1.x device
276ada0: Serial Number 9QG0PPPM
277ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
278ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
279ada0: Previously was known as ad4
280ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
281ada1: <SEAGATE ST3500630NS 3.AQNZ> ATA-7 SATA 1.x device
282ada1: Serial Number 9QG8SARG
283ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
284ada1: Command Queueing enabled
285ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
286ada1: Previously was known as ad6
287ada2 at ahcich2 bus 0 scbus4 target 0 lun 0
288ada2: <SEAGATE ST3500630NS 3.AQNZ> ATA-7 SATA 1.x device
289ada2: Serial Number 9QG9NC9Z
290ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
291ada2: Command Queueing enabled
292ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
293ada2: Previously was known as ad8
294cd0 at ata0 bus 0 scbus0 target 0 lun 0
295cd0: <LITE-ON DVDRW LH-20A1P KL0N> Removable CD-ROM SCSI-0 device
296cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
297cd0: Attempt to query device size failed: NOT READY, Medium not present
298Netvsc initializing... SMP: AP CPU #1 Launched!
299Timecounter "TSC-low" frequency 1500031537 Hz quality 800
300ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
301ada0: <ST3500630NS 3.BJH> s/n 9QG0PPPM detached
302Root mount waiting for: usbus3(ada0: usbus1
303ahcich0:0:0:0): Periph destroyed
304Root mount waiting for: usbus3 usbus1
305uhub3: 6 ports with 6 removable, self powered
306uhub2: 6 ports with 6 removable, self powered
307Root mount waiting for: usbus3 usbus1
308ugen1.2: <vendor 0x1a40> at usbus1
309uhub4: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 2> on usbus1
310uhub4: MTT enabled
311ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
312ada0: <ST3500630NS 3.BJH> ATA-7 SATA 1.x device
313ada0: Serial Number 9QG0PPPM
314ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
315ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
316ada0: Previously was known as ad4
317ugen2.2: <Logitech> at usbus2
318ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/23.01, addr 2> on usbus2
319kbd2 at ukbd0
320uhub4: 7 ports with 7 removable, self powered
321Root mount waiting for: usbus1
322Root mount waiting for: usbus1
323ugen1.3: <SanDisk> at usbus1
324umass0: <SanDisk U3 Cruzer Micro, class 0/0, rev 2.00/2.00, addr 3> on usbus1
325umass0:  SCSI over Bulk-Only; quirks = 0x4100
326umass0:8:0:-1: Attached to scbus8
327da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
328da0: <SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device
329da0: Serial Number 077412166A014532
330da0: 40.000MB/s transfers
331da0: 7691MB (15753215 512 byte sectors: 255H 63S/T 980C)
332da0: quirks=0x2<NO_6_BYTE>
333Trying to mount root from cd9660:/dev/iso9660/PCBSD_INSTALL []...
334ugen0.2: <C.C.H> at usbus0
335ukbd1: < Share Switch> on usbus0
336kbd3 at ukbd1
337ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
338ada0: <ST3500630NS 3.BJH> s/n 9QG0PPPM detached
339(ada0:ahcich0:0:0:0): Periph destroyed
340md0.uzip: 34755 x 65536 blocks
341cryptosoft0: <software crypto> on motherboard
342ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
343ada0: <ST3500630NS 3.BJH> ATA-7 SATA 1.x device
344ada0: Serial Number 9QG0PPPM
345ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
346ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
347ada0: Previously was known as ad4
348ZFS filesystem version: 5
349ZFS storage pool version: features support (5000)
350nvidia0: <GeForce 8300> on vgapci0
351vgapci0: child nvidia0 requested pci_enable_io
352vgapci0: child nvidia0 requested pci_enable_io
353ums0: <Logitech USB Receiver, class 0/0, rev 2.00/23.01, addr 2> on usbus2
354ums0: 18 buttons and [XYZT] coordinates ID=2
355ums1: < Share Switch> on usbus0
356ums1: 3 buttons and [XYZ] coordinates ID=1
357nfe0: link state changed to DOWN
358nfe0: link state changed to UP
359/tmp: optimization changed from SPACE to TIME
360GEOM_MIRROR: Component ada0p3 (device swapmirror) broken, skipping.
361GEOM_MIRROR: Device mirror/swapmirror launched (2/3).
362GEOM_MIRROR: Component gptid/0afe2b05-a95a-11e3-874a-0026189199c3 (device swapmirror) broken, skipping.
363GEOM_MIRROR: Cannot add disk gptid/0afe2b05-a95a-11e3-874a-0026189199c3 to swapmirror (error=22).
364ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
365ada0: <ST3500630NS 3.BJH> s/n 9QG0PPPM detached
366(ada0:ahcich0:0:0:0): Periph destroyed
367ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
368ada0: <ST3500630NS 3.BJH> ATA-7 SATA 1.x device
369ada0: Serial Number 9QG0PPPM
370ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
371ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
372ada0: Previously was known as ad4
373ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
374ada0: <ST3500630NS 3.BJH> s/n 9QG0PPPM detached
375(ada0:ahcich0:0:0:0): Periph destroyed
376ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
377ada0: <ST3500630NS 3.BJH> ATA-7 SATA 1.x device
378ada0: Serial Number 9QG0PPPM
379ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
380ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
381ada0: Previously was known as ad4
382ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
383ada0: <ST3500630NS 3.BJH> s/n 9QG0PPPM detached
384(ada0:ahcich0:0:0:0): Periph destroyed
385ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
386ada0: <ST3500630NS 3.BJH> ATA-7 SATA 1.x device
387ada0: Serial Number 9QG0PPPM
388ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
389ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
390ada0: Previously was known as ad4
391ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
392ada0: <ST3500630NS 3.BJH> s/n 9QG0PPPM detached
393(ada0:ahcich0:0:0:0): Periph destroyed
394ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
395ada0: <ST3500630NS 3.BJH> ATA-7 SATA 1.x device
396ada0: Serial Number 9QG0PPPM
397ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
398ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
399ada0: Previously was known as ad4
400ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
401ada0: <ST3500630NS 3.BJH> s/n 9QG0PPPM detached
402(ada0:ahcich0:0:0:0): Periph destroyed
403ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
404ada0: <ST3500630NS 3.BJH> ATA-7 SATA 1.x device
405ada0: Serial Number 9QG0PPPM
406ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
407ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
408ada0: Previously was known as ad4
409GEOM_MIRROR: Component ada0p3 (device swapmirror) broken, skipping.
410GEOM_MIRROR: Cannot add disk ada0p3 to swapmirror (error=22).
411GEOM_MIRROR: Component diskid/DISK-9QG0PPPMp3 (device swapmirror) broken, skipping.
412GEOM_MIRROR: Cannot add disk diskid/DISK-9QG0PPPMp3 to swapmirror (error=22).
413GEOM_MIRROR: Component gptid/0afe2b05-a95a-11e3-874a-0026189199c3 (device swapmirror) broken, skipping.
414GEOM_MIRROR: Cannot add disk gptid/0afe2b05-a95a-11e3-874a-0026189199c3 to swapmirror (error=22).
415
416# MOUNT OUTPUT
417/dev/iso9660/PCBSD_INSTALL on / (cd9660, local, read-only)
418devfs on /dev (devfs, local, multilabel)
419/dev/md6 on /tmp (ufs, local)
420/dev/md2 on /memfs (ufs, local)
421/dev/md0.uzip on /usr (ufs, local, read-only)
422/dev/md10 on /etc (ufs, local)
423/dev/md9 on /var (ufs, local)
424/dev/md8 on /root (ufs, local)