Ticket #279: dmesg.txt

File dmesg.txt, 10.4 KB (added by htl, 4 years ago)

dmesg

Line 
1Copyright (c) 1992-2009 The FreeBSD Project.
2Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
3        The Regents of the University of California. All rights reserved.
4FreeBSD is a registered trademark of The FreeBSD Foundation.
5FreeBSD 8.0-RELEASE-p2 #4: Thu Jan  7 09:20:42 PST 2010
6    root@build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sys/PCBSD
7Timecounter "i8254" frequency 1193182 Hz quality 0
8CPU: AMD Athlon(tm)X2 DualCore QL-64 (2100.08-MHz 686-class CPU)
9  Origin = "AuthenticAMD"  Id = 0x200f31  Stepping = 1
10  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
11  Features2=0x2001<SSE3,CX16>
12  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
13  AMD Features2=0x131f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch,OSVW,SKINIT>
14  TSC: P-state invariant
15real memory  = 2147483648 (2048 MB)
16avail memory = 1820250112 (1735 MB)
17ACPI APIC Table: <HP     0944    >
18FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
19FreeBSD/SMP: 1 package(s) x 2 core(s)
20 cpu0 (BSP): APIC ID:  0
21 cpu1 (AP): APIC ID:  1
22ioapic0: Changing APIC ID to 4
23ioapic0 <Version 2.1> irqs 0-23 on motherboard
24kbd1 at kbdmux0
25cryptosoft0: <software crypto> on motherboard
26acpi0: <HPQOEM SLIC-MPC> on motherboard
27acpi0: [ITHREAD]
28acpi0: Power Button (fixed)
29acpi0: reservation of 260, 14 (4) failed
30acpi0: reservation of 0, a0000 (3) failed
31acpi0: reservation of 100000, 7ff00000 (3) failed
32Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
33acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
34acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
35acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
36acpi_hpet0: HPET never increments, disabling
37device_attach: acpi_hpet0 attach returned 6
38pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xffe00000-0xffffffff on acpi0
39pci0: <ACPI PCI bus> on pcib0
40pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
41pci1: <ACPI PCI bus> on pcib1
42vgapci0: <VGA-compatible display> port 0x5000-0x50ff mem 0x80000000-0x8fffffff,0x94300000-0x9430ffff,0x94200000-0x942fffff irq 18 at device 5.0 on pci1
43pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
44pci2: <ACPI PCI bus> on pcib2
45pci2: <network, ethernet> at device 0.0 (no driver attached)
46pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
47pci3: <ACPI PCI bus> on pcib3
48pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
49pci6: <ACPI PCI bus> on pcib4
50pci6: <network> at device 0.0 (no driver attached)
51ahci0: <AHCI controller> port 0x6018-0x601f,0x6024-0x6027,0x6010-0x6017,0x6020-0x6023,0x6000-0x600f mem 0x94409000-0x944093ff irq 20 at device 17.0 on pci0
52ahci0: [ITHREAD]
53ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier not supported
54ahcich0: <AHCI channel> at channel 0 on ahci0
55ahcich0: [ITHREAD]
56ahcich1: <AHCI channel> at channel 1 on ahci0
57ahcich1: [ITHREAD]
58ohci0: <OHCI (generic) USB controller> mem 0x94408000-0x94408fff irq 16 at device 18.0 on pci0
59ohci0: [ITHREAD]
60usbus0: <OHCI (generic) USB controller> on ohci0
61ohci1: <OHCI (generic) USB controller> mem 0x94407000-0x94407fff irq 16 at device 18.1 on pci0
62ohci1: [ITHREAD]
63usbus1: <OHCI (generic) USB controller> on ohci1
64ehci0: <EHCI (generic) USB 2.0 controller> mem 0x94409500-0x944095ff irq 17 at device 18.2 on pci0
65ehci0: [ITHREAD]
66usbus2: EHCI version 1.0
67usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
68ohci2: <OHCI (generic) USB controller> mem 0x94406000-0x94406fff irq 17 at device 19.0 on pci0
69ohci2: [ITHREAD]
70usbus3: <OHCI (generic) USB controller> on ohci2
71ohci3: <OHCI (generic) USB controller> mem 0x94405000-0x94405fff irq 17 at device 19.1 on pci0
72ohci3: [ITHREAD]
73usbus4: <OHCI (generic) USB controller> on ohci3
74ehci1: <EHCI (generic) USB 2.0 controller> mem 0x94409400-0x944094ff irq 19 at device 19.2 on pci0
75ehci1: [ITHREAD]
76usbus5: EHCI version 1.0
77usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
78pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
79pci0: <multimedia, HDA> at device 20.2 (no driver attached)
80isab0: <PCI-ISA bridge> at device 20.3 on pci0
81isa0: <ISA bus> on isab0
82pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
83pci128: <ACPI PCI bus> on pcib5
84ohci4: <OHCI (generic) USB controller> mem 0x94404000-0x94404fff irq 18 at device 20.5 on pci0
85ohci4: [ITHREAD]
86usbus6: <OHCI (generic) USB controller> on ohci4
87battery0: <ACPI Control Method Battery> on acpi0
88acpi_acad0: <AC Adapter> on acpi0
89acpi_button0: <Sleep Button> on acpi0
90acpi_lid0: <Control Method Lid Switch> on acpi0
91acpi_tz0: <Thermal Zone> on acpi0
92acpi_tz1: <Thermal Zone> on acpi0
93atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
94atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
95atkbd0: <AT Keyboard> irq 1 on atkbdc0
96kbd0 at atkbd0
97atkbd0: [GIANT-LOCKED]
98atkbd0: [ITHREAD]
99psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
100psm0: [GIANT-LOCKED]
101psm0: [ITHREAD]
102psm0: model Generic PS/2 mouse, device ID 0
103cpu0: <ACPI CPU> on acpi0
104acpi_throttle0: <ACPI CPU Throttling> on cpu0
105hwpstate0: <Cool`n'Quiet 2.0> on cpu0
106cpu1: <ACPI CPU> on acpi0
107acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
108Timecounter "HPET" frequency 14318180 Hz quality 900
109pmtimer0 on isa0
110orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
111sc0: <System console> at flags 0x100 on isa0
112sc0: VGA <16 virtual consoles, flags=0x300>
113vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
114ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
115ata0: [ITHREAD]
116ata1 at port 0x170-0x177,0x376 irq 15 on isa0
117ata1: [ITHREAD]
118ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
119            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
120ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
121             Consider tuning vm.kmem_size and vm.kmem_size_max
122             in /boot/loader.conf.
123ZFS filesystem version 13
124ZFS storage pool version 13
125Timecounters tick every 1.000 msec
126Waiting 5 seconds for SCSI devices to settle
127usbus0: 12Mbps Full Speed USB v1.0
128usbus1: 12Mbps Full Speed USB v1.0
129usbus2: 480Mbps High Speed USB v2.0
130usbus3: 12Mbps Full Speed USB v1.0
131usbus4: 12Mbps Full Speed USB v1.0
132usbus5: 480Mbps High Speed USB v2.0
133usbus6: 12Mbps Full Speed USB v1.0
134ugen0.1: <ATI> at usbus0
135uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
136ugen1.1: <ATI> at usbus1
137uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
138ugen2.1: <ATI> at usbus2
139uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
140ugen3.1: <ATI> at usbus3
141uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
142ugen4.1: <ATI> at usbus4
143uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
144ugen5.1: <ATI> at usbus5
145uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
146ugen6.1: <ATI> at usbus6
147uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
148uhub6: 2 ports with 2 removable, self powered
149uhub0: 3 ports with 3 removable, self powered
150uhub1: 3 ports with 3 removable, self powered
151uhub3: 3 ports with 3 removable, self powered
152uhub4: 3 ports with 3 removable, self powered
153uhub2: 6 ports with 6 removable, self powered
154uhub5: 6 ports with 6 removable, self powered
155ugen5.2: <Chicony Electronics Co., Ltd.> at usbus5
156ugen2.2: <JetFlash> at usbus2
157umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on usbus2
158umass0:  SCSI over Bulk-Only; quirks = 0x0100
159umass0:2:0:-1: Attached to scbus2
160(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
161(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
162(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
163(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
164(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
165(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
166(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
167(aprobe1:ahcich1:0:0:0): SIGNATURE: eb14
168ada0 at ahcich0 bus 0 target 0 lun 0
169ada0: <WDC WD3200BEVT-60ZCT1 13.01A13> ATA/ATAPI-8 SATA 2.x device
170ada0: 300.000MB/s transfers
171ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
172ada0: Native Command Queueing enabled
173da0 at umass-sim0 bus 0 target 0 lun 0
174da0: <JetFlash TS4GJFV35 8.07> Removable Direct Access SCSI-2 device
175da0: 40.000MB/s transfers
176da0: 3900MB (7987200 512 byte sectors: 255H 63S/T 497C)
177cd0 at ahcich1 bus 0 target 0 lun 0
178cd0: <HL-DT-ST DVDRAM GT20L DC03> Removable CD-ROM SCSI-0 device
179cd0: 150.000MB/s transfers
180cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
181SMP: AP CPU #1 Launched!
182Trying to mount root from ufs:/dev/label/rootfs0
183WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
184ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
185hdac0: <ATI SB600 High Definition Audio Controller> mem 0x94400000-0x94403fff irq 16 at device 20.2 on pci0
186hdac0: HDA Driver Revision: 20090624_0136
187hdac0: [ITHREAD]
188hdac0: HDA Codec #0: IDT 92HD75B3
189hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
190hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
191hdac0: Codec #1 is not responding! Probing aborted.
192pcm0: <HDA IDT 92HD75B3 PCM #0 Analog> at cad 0 nid 1 on hdac0
193drm0: <ATI Radeon HD 3200 Graphics> on vgapci0
194info: [drm] MSI enabled 1 message(s)
195vgapci0: child drm0 requested pci_enable_busmaster
196info: [drm] Initialized radeon 1.29.0 20080528
197info: [drm] Setting GART location based on new memory map
198info: [drm] Loading RS780/RS880 Microcode
199info: [drm] Resetting GPU
200info: [drm] writeback test succeeded in 1 usecs
201drm0: [ITHREAD]
202ugen2.2: <JetFlash> at usbus2 (disconnected)
203umass0: at uhub2, port 3, addr 2 (disconnected)
204(da0:umass-sim0:0:0:0): lost device
205(da0:umass-sim0:0:0:0): removing device entry
206ugen2.2: <JetFlash> at usbus2
207umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on usbus2
208umass0:  SCSI over Bulk-Only; quirks = 0x0100
209umass0:2:0:-1: Attached to scbus2
210(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
211(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
212(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
213(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
214(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
215(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
216da0 at umass-sim0 bus 0 target 0 lun 0
217da0: <JetFlash TS4GJFV35 8.07> Removable Direct Access SCSI-2 device
218da0: 40.000MB/s transfers
219da0: 3900MB (7987200 512 byte sectors: 255H 63S/T 497C)