Ticket #717: pc-sysinstall.2.log

File pc-sysinstall.2.log, 76.3 KB (added by NaomasaMaruyama, 18 months ago)
Line 
1kern.geom.debugflags: 0 -> 16
2Deleting all gparts
3Running: gpart delete -i 1 /dev/ada0
4ada0s1 deleted
5Running: gpart destroy /dev/ada0
6ada0 destroyed
7Clearing gpt backup table location on disk
8Running: dd if=/dev/zero of=/dev/ada0 bs=1m count=1
91+0 records in
101+0 records out
111048576 bytes transferred in 0.015807 secs (66335543 bytes/sec)
12Running: dd if=/dev/zero of=/dev/ada0 bs=1m oseek=38158
13dd: /dev/ada0: short write on character device
14dd: /dev/ada0: end of device
155+0 records in
164+1 records out
174456448 bytes transferred in 0.059674 secs (74680162 bytes/sec)
18Running: dd if=/dev/zero of=/dev/ada0 count=3000
193000+0 records in
203000+0 records out
211536000 bytes transferred in 12.312099 secs (124755 bytes/sec)
22Running gpart on /dev/ada0
23Running: gpart create -s mbr -f active /dev/ada0
24ada0 created
25Running gpart add on /dev/ada0
26Running: gpart add -a 4k -t freebsd -i 1 /dev/ada0
27ada0s1 added
28Cleaning up /dev/ada0s1
29Running: dd if=/dev/zero of=/dev/ada0s1 count=1024
301024+0 records in
311024+0 records out
32524288 bytes transferred in 8.095749 secs (64761 bytes/sec)
33Running: gpart set -a active -i 1 /dev/ada0
34active set on ada0s1
35Stamping boot0 on /dev/ada0
36Running: gpart bootcode -b /boot/boot0 /dev/ada0
37bootcode written to ada0
38Running: gpart create -s BSD /dev/ada0s1
39ada0s1 created
40Running: gpart add -s 2000M  -t freebsd-ufs -i 1 /dev/ada0s1
41ada0s1a added
42Running: gpart add -s 2000M  -t freebsd-swap -i 2 /dev/ada0s1
43ada0s1b added
44Running: gpart add -s 2048M  -t freebsd-ufs -i 4 /dev/ada0s1
45ada0s1d added
46Running: gpart add -s 32112M  -t freebsd-ufs -i 5 /dev/ada0s1
47ada0s1e added
48Running: gpart bootcode -b /boot/boot /dev/ada0s1
49bootcode written to ada0s1
50NEWFS: /dev/ada0s1a - UFS+SUJ
51Running: newfs -t  -U /dev/ada0s1a
52/dev/ada0s1a: 2000.0MB (4096000 sectors) block size 32768, fragment size 4096
53        using 4 cylinder groups of 500.03MB, 16001 blks, 64128 inodes.
54        with soft updates
55super-block backups (for fsck_ffs -b #) at:
56 192, 1024256, 2048320, 3072384
57Running: sync
58Running: tunefs -j enable /dev/ada0s1a
59tunefs: soft updates journaling set
60Using inode 4 in cg 0 for 16384000 byte journal
61Running: sync
62Running: glabel label rootfs0 /dev/ada0s1a
63Running: sync
64Running: sync
65Running: glabel label swap0 /dev/ada0s1b
66Running: sync
67NEWFS: /dev/ada0s1d - UFS+SUJ
68Running: newfs -t  -U /dev/ada0s1d
69/dev/ada0s1d: 2048.0MB (4194304 sectors) block size 32768, fragment size 4096
70        using 4 cylinder groups of 512.03MB, 16385 blks, 65664 inodes.
71        with soft updates
72super-block backups (for fsck_ffs -b #) at:
73 192, 1048832, 2097472, 3146112
74Running: sync
75Running: tunefs -j enable /dev/ada0s1d
76tunefs: soft updates journaling set
77Using inode 4 in cg 0 for 16777216 byte journal
78Running: sync
79Running: glabel label var0 /dev/ada0s1d
80Running: sync
81NEWFS: /dev/ada0s1e - UFS+SUJ
82Running: newfs -t  -U /dev/ada0s1e
83/dev/ada0s1e: 32112.0MB (65765376 sectors) block size 32768, fragment size 4096
84        using 52 cylinder groups of 626.22MB, 20039 blks, 80256 inodes.
85        with soft updates
86super-block backups (for fsck_ffs -b #) at:
87 192, 1282688, 2565184, 3847680, 5130176, 6412672, 7695168, 8977664, 10260160,
88 11542656, 12825152, 14107648, 15390144, 16672640, 17955136, 19237632,
89 20520128, 21802624, 23085120, 24367616, 25650112, 26932608, 28215104,
90 29497600, 30780096, 32062592, 33345088, 34627584, 35910080, 37192576,
91 38475072, 39757568, 41040064, 42322560, 43605056, 44887552, 46170048,
92 47452544, 48735040, 50017536, 51300032, 52582528, 53865024, 55147520,
93 56430016, 57712512, 58995008, 60277504, 61560000, 62842496, 64124992, 65407488
94Running: sync
95Running: tunefs -j enable /dev/ada0s1e
96tunefs: soft updates journaling set
97Using inode 4 in cg 0 for 33554432 byte journal
98Running: sync
99Running: glabel label usr0 /dev/ada0s1e
100Running: sync
101mount -o rw /dev/ada0s1a -> /mnt/
102Running: mount -o rw /dev/ada0s1a /mnt/
103swapon /dev/ada0s1b
104Running: swapon /dev/ada0s1b
105mount -o rw /dev/ada0s1d -> /mnt/var
106Running: mount -o rw /dev/ada0s1d /mnt/var
107mount -o rw /dev/ada0s1e -> /mnt/usr
108Running: mount -o rw /dev/ada0s1e /mnt/usr
109pc-sysinstall: Starting Extraction (base)
110pc-sysinstall: Starting Extraction (doc)
111pc-sysinstall: Starting Extraction (games)
112pc-sysinstall: Starting Extraction (kernel)
113pc-sysinstall: Extraction Finished
114Running: mkdir -p /mnt/usr/.pkgtmp
115Running: mount_nullfs /dist/packages /mnt/usr/.pkgtmp
116Running: cd /mnt/usr/.pkgtmp/All
117Packages to install: 2
118Running chroot command: which pkg-static
119Bootstraping pkgng..
120Running: pkg -c /mnt add /usr/.pkgtmp/Latest/pkg.txz
121Installing pkg-1.0.11... done
122If you are upgrading from the old package format, first run:
123
124  # pkg2ng
125Running chroot command: pkg2ng
126Running chroot command: pkg info -e pcbsd-base-21950.txz
127Installing package: pcbsd-base-21950.txz
128Running: pkg -c /mnt add /usr/.pkgtmp/All/pcbsd-base-21950.txz
129Installing pcbsd-base-21950...Installing ImageMagick-6.8.0.7_1...Installing ORBit2-2.14.19...Installing gamin-0.1.10_5...Installing gettext-0.18.1.1_1...Installing libiconv-1.14_1... done
130 done
131Installing glib-2.34.3...Installing libffi-3.0.13... done
132Installing pcre-8.32... done
133Installing perl-5.14.2_3...Removing stale symlinks from /usr/bin...
134    Skipping /usr/bin/perl
135    Skipping /usr/bin/perl5
136Done.
137Creating various symlinks in /usr/bin...
138    Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl
139    Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5
140Done.
141Cleaning up /etc/make.conf... Done.
142Spamming /etc/make.conf... Done.
143 done
144Installing python27-2.7.3_6... done
145No schema files found: doing nothing.
146 done
147 done
148Installing gio-fam-backend-2.34.3... done
149Installing libIDL-0.8.14_1... done
150 done
151Installing atk-2.6.0...Installing gnomehier-3.0... done
152 done
153Installing bitstream-vera-1.10_5...Installing expat-2.0.1_2... done
154Installing fontconfig-2.9.0,1...Installing freetype2-2.4.11... done
155Running fc-cache to build fontconfig cache...
156/usr/local/share/fonts: skipping, no such directory
157/usr/local/lib/X11/fonts: caching, new cache contents: 0 fonts, 1 dirs
158/usr/local/lib/X11/fonts/local: caching, new cache contents: 0 fonts, 0 dirs
159/root/.fonts: skipping, no such directory
160/var/db/fontconfig: cleaning cache directory
161/root/.fontconfig: not cleaning non-existent cache directory
162fc-cache: succeeded
163 done
164/usr/local/lib/X11/fonts/bitstream-vera: caching, new cache contents: 10 fonts, 0 dirs
165/var/db/fontconfig: cleaning cache directory
166/var/db/fontconfig: invalid cache file: deea84fa067eec67b69dab1b2344175b-le32d4.cache-3
167/root/.fontconfig: not cleaning non-existent cache directory
168/usr/local/bin/fc-cache: succeeded
169 done
170Installing cairo-1.10.2_5,2...Installing kbproto-1.0.5... done
171Installing libX11-1.4.4,1...Installing libXau-1.0.6...Installing pkgconf-0.9.1_2... done
172Installing xproto-7.0.22... done
173 done
174Installing libXdmcp-1.1.0... done
175Installing libpthread-stubs-0.3_3... done
176Installing libxcb-1.7... done
177 done
178Installing libXrender-0.9.6...Installing renderproto-0.11.1... done
179 done
180Installing pixman-0.24.2... done
181Installing png-1.5.14... done
182Installing xcb-util-renderutil-0.3.8...Installing xcb-util-0.3.9_1,1... done
183 done
184 done
185Installing compositeproto-0.4.2... done
186Installing cups-client-1.5.4_1... done
187Installing cups-image-1.5.4_1...Installing jbigkit-1.6... done
188Installing jpeg-8_4... done
189Installing tiff-4.0.3... done
190 done
191Installing damageproto-1.2.1... done
192Installing dbus-glib-0.100.1...Installing dbus-1.6.8...Installing gnome_subr-1.0... done
193Installing libICE-1.0.7,1... done
194Installing libSM-1.2.0,1... done
195Installing libxml2-2.8.0_1... done
196===> Creating users and/or groups.
197Creating group 'messagebus' with gid '556'.
198Creating user 'messagebus' with uid '556'.
199 done
200 done
201Installing dconf-0.12.1_1... done
202Installing encodings-1.0.4,1...Installing font-util-1.3.0... done
203 done
204Installing fftw3-3.3.3_1... done
205Installing fixesproto-5.0... done
206Installing font-bh-ttf-1.0.3...Installing libfontenc-1.1.0... done
207Installing mkfontdir-1.0.7...Installing mkfontscale-1.1.0... done
208 done
209 done
210Installing font-misc-ethiopic-1.0.3... done
211Installing font-misc-meltho-1.0.3... done
212Installing gconf2-2.32.0_3...Installing gdk-pixbuf2-2.26.5_3...Installing inputproto-2.0.2... done
213Installing jasper-1.900.1_10... done
214Installing libXext-1.3.0_1,1...Installing xextproto-7.2.0... done
215 done
216Installing libXi-1.4.5,1... done
217Installing libXt-1.1.1,1... done
218 done
219Installing gobject-introspection-1.34.2... done
220Installing gtk-update-icon-cache-2.24.17...Installing hicolor-icon-theme-0.12... done
221Installing libXcomposite-0.4.3,1...Installing libXfixes-5.0... done
222 done
223Installing libXcursor-1.1.12... done
224Installing libXdamage-1.1.3... done
225Installing libXft-2.3.1... done
226Installing libXinerama-1.1.1,1...Installing xineramaproto-1.2.1... done
227 done
228Installing libXrandr-1.3.2...Installing randrproto-1.3.2... done
229 done
230Installing pango-1.30.1...Installing xorg-fonts-truetype-7.5.1... done
231 done
232Installing shared-mime-info-1.0_2... done
233 done
234Installing gtk-2.24.17... done
235Installing polkit-0.105_1... done
236 done
237Installing ghostscript9-9.06_1...Installing gsfonts-8.11_5... done
238Installing jbig2dec-0.11_1... done
239Installing lcms2-2.4... done
240Installing libidn-1.26... done
241Installing libpaper-1.1.24_1... done
242Installing svgalib-1.4.3_6... done
243 done
244Installing gtk-engines2-2.20.2_1... done
245Installing libcroco-0.6.8... done
246Installing libfpx-1.3.1.1... done
247Installing libgsf-1.14.21_1... done
248Installing liblqr-1-0.4.1_4... done
249Installing libltdl-2.4.2... done
250Installing librsvg2-2.36.4... done
251Installing libwmf-0.2.8.4_10... done
252Installing webp-0.1.3_1... done
253 done
254Installing OpenSSH-askpass-1.2.4.1... done
255Installing a2ps-a4-4.13b_4... done
256Installing aalib-1.4.r5_6... done
257Installing alsa-lib-1.0.26... done
258Installing appres-1.0.3... done
259Installing apr-1.4.6.1.4.1_3...Installing db42-4.2.52_5... done
260Installing gdbm-1.9.1... done
261 done
262Installing ar-aspell-1.2.0_1,1...Installing aspell-0.60.6.1_2... done
263 done
264Installing aria2-1.16.5...Installing sqlite3-3.7.14.1... done
265 done
266Installing at-spi2-atk-2.6.2...Installing at-spi2-core-2.6.3...Installing libXtst-1.2.0...Installing recordproto-1.14.1... done
267 done
268 done
269 done
270Installing at-spi-1.32.0_2...Installing libbonobo-2.32.0...Installing popt-1.16... done
271 done
272 done
273Installing atkmm-2.22.6...Installing glibmm-2.34.1,1...Installing libsigc++-2.2.10... done
274 done
275 done
276Installing avahi-app-0.6.29_3...Installing libdaemon-0.14... done
277===> Creating users and/or groups.
278Creating group 'avahi' with gid '558'.
279Creating user 'avahi' with uid '558'.
280 done
281Installing bash-4.2.42... done
282Installing binutils-2.23.1... done
283Installing bitmap-1.0.6...Installing libXaw-1.0.9,2...Installing libXmu-1.1.0,1... done
284Installing libXp-1.0.1,1...Installing printproto-1.0.5... done
285 done
286Installing libXpm-3.5.9... done
287 done
288Installing xbitmaps-1.1.1... done
289 done
290Installing ca_root_nss-3.14.3... done
291Installing cairomm-1.10.0_1...Installing libxml++-2.34.2... done
292 done
293Installing cantarell-fonts-0.0.12.../usr/local/share/fonts/cantarell: caching, new cache contents: 2 fonts, 0 dirs
294/var/db/fontconfig: cleaning cache directory
295/root/.fontconfig: not cleaning non-existent cache directory
296/usr/local/bin/fc-cache: succeeded
297 done
298Installing cdparanoia-3.9.8_9... done
299Installing cdrdao-1.2.3_4...Installing libao-1.1.0_1... done
300Installing libmad-0.15.1b_2... done
301Installing libogg-1.3.0,4... done
302Installing libvorbis-1.3.3_1,3... done
303 done
304Installing cdrtools-3.00_2... done
305Installing colord-0.1.20_1... done
306Installing consolekit-0.4.3... done
307Installing cscope-15.8a... done
308Installing ctags-5.8... done
309Installing cups-base-1.5.4_1...Installing open-motif-2.3.4... done
310Installing xpdf-3.03_3... done
311 done
312Installing cups-pdf-2.6.1_1... done
313Installing cups-pk-helper-0.0.4_3...Installing policykit-0.9_6...===> Creating users and/or groups.
314Creating group 'polkit' with gid '562'.
315Creating user 'polkit' with uid '562'.
316 done
317 done
318Installing cups-pstoraster-8.15.4_7... done
319Installing cups-smb-backend-1.0_6...Installing libexecinfo-1.1_3... done
320Installing libsunacl-1.0... done
321Installing openldap-client-2.4.34_1... done
322Installing samba36-3.6.13...Installing talloc-2.0.8... done
323Installing tdb-1.2.11,1... done
324 done
325 done
326Installing curl-7.24.0_2... done
327Installing cursor-jimmac-theme-0.1_2... done
328Installing cuse4bsd-kmod-0.1.27... done
329Installing db41-4.1.25_4... done
330Installing db46-4.6.21.4... done
331Installing de-aspell-20030222.1_1... done
332Installing debootstrap-1.0.46_1...Installing wget-1.14... done
333 done
334Installing dejavu-2.33... done
335Installing dirmngr-1.1.0_8...Installing libassuan-2.0.3...Installing libgpg-error-1.11... done
336 done
337Installing libgcrypt-1.5.0_1... done
338Installing libksba-1.3.0... done
339Installing pth-2.0.7... done
340 done
341Installing dmidecode-2.11... done
342Installing dmxproto-2.3.1... done
343Installing docbook-sk-4.1.2_4...Installing xmlcatmgr-2.2... + Creating /usr/local/share/sgml/catalog
344 + Registering CATALOG catalog.ports (SGML)
345 + Creating /usr/local/share/sgml/catalog.ports
346 + Creating /usr/local/share/xml/catalog
347 + Registering nextCatalog catalog.ports (XML)
348 + Creating /usr/local/share/xml/catalog.ports
349 done
350 done
351Installing docbook-xml-4.2_1... done
352Installing docbook-xml-4.3... done
353Installing docbook-xml-4.4_1... done
354Installing docbook-xml-4.5... done
355Installing docbook-xsl-1.76.1...Installing docbook-1.4...Installing docbook-4.1_4...Installing iso8879-1986_3... done
356 done
357Installing docbook-4.2... done
358Installing docbook-4.3... done
359Installing docbook-4.4_2... done
360Installing docbook-4.5_2... done
361Installing docbook-5.0_1...Installing xmlcharent-0.3_2... done
362 done
363 done
364xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.36' of type `rewriteSystem'
365xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.36' of type `rewriteURI'
366xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.37' of type `rewriteSystem'
367xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.37' of type `rewriteURI'
368xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.38' of type `rewriteSystem'
369xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.38' of type `rewriteURI'
370xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.39' of type `rewriteSystem'
371xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.39' of type `rewriteURI'
372xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.40' of type `rewriteSystem'
373xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.40' of type `rewriteURI'
374xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.41' of type `rewriteSystem'
375xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.41' of type `rewriteURI'
376xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.42' of type `rewriteSystem'
377xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.42' of type `rewriteURI'
378xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.43' of type `rewriteSystem'
379xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.43' of type `rewriteURI'
380xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.44' of type `rewriteSystem'
381xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.44' of type `rewriteURI'
382xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.45' of type `rewriteSystem'
383xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.45' of type `rewriteURI'
384xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.46' of type `rewriteSystem'
385xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.46' of type `rewriteURI'
386xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.47' of type `rewriteSystem'
387xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.47' of type `rewriteURI'
388xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.48' of type `rewriteSystem'
389xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.48' of type `rewriteURI'
390xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.49' of type `rewriteSystem'
391xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.49' of type `rewriteURI'
392xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.50.0' of type `rewriteSystem'
393xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.50.0' of type `rewriteURI'
394xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.51.0' of type `rewriteSystem'
395xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.51.0' of type `rewriteURI'
396xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.51.1' of type `rewriteSystem'
397xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.51.1' of type `rewriteURI'
398xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.0' of type `rewriteSystem'
399xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.0' of type `rewriteURI'
400xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.1' of type `rewriteSystem'
401xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.1' of type `rewriteURI'
402xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.2' of type `rewriteSystem'
403xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.52.2' of type `rewriteURI'
404xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.53.0' of type `rewriteSystem'
405xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.53.0' of type `rewriteURI'
406xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.54.0' of type `rewriteSystem'
407xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.54.0' of type `rewriteURI'
408xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.54.1' of type `rewriteSystem'
409xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.54.1' of type `rewriteURI'
410xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.55.0' of type `rewriteSystem'
411xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.55.0' of type `rewriteURI'
412xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.56.0' of type `rewriteSystem'
413xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.56.0' of type `rewriteURI'
414xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.56.1' of type `rewriteSystem'
415xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.56.1' of type `rewriteURI'
416xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.57.0' of type `rewriteSystem'
417xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.57.0' of type `rewriteURI'
418xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.58.0' of type `rewriteSystem'
419xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.58.0' of type `rewriteURI'
420xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.58.1' of type `rewriteSystem'
421xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.58.1' of type `rewriteURI'
422xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.0' of type `rewriteSystem'
423xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.0' of type `rewriteURI'
424xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.1' of type `rewriteSystem'
425xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.1' of type `rewriteURI'
426xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.2' of type `rewriteSystem'
427xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.59.2' of type `rewriteURI'
428xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.60.0' of type `rewriteSystem'
429xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.60.0' of type `rewriteURI'
430xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.60.1' of type `rewriteSystem'
431xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.60.1' of type `rewriteURI'
432xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.0' of type `rewriteSystem'
433xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.0' of type `rewriteURI'
434xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.1' of type `rewriteSystem'
435xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.1' of type `rewriteURI'
436xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.2' of type `rewriteSystem'
437xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.2' of type `rewriteURI'
438xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.3' of type `rewriteSystem'
439xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.61.3' of type `rewriteURI'
440xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.0' of type `rewriteSystem'
441xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.0' of type `rewriteURI'
442xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.1' of type `rewriteSystem'
443xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.1' of type `rewriteURI'
444xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.2' of type `rewriteSystem'
445xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.2' of type `rewriteURI'
446xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.3' of type `rewriteSystem'
447xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.3' of type `rewriteURI'
448xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.4' of type `rewriteSystem'
449xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.62.4' of type `rewriteURI'
450xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.63.0' of type `rewriteSystem'
451xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.63.0' of type `rewriteURI'
452xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.64.0' of type `rewriteSystem'
453xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.64.0' of type `rewriteURI'
454xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.64.1' of type `rewriteSystem'
455xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.64.1' of type `rewriteURI'
456xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.65.0' of type `rewriteSystem'
457xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.65.0' of type `rewriteURI'
458xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.65.1' of type `rewriteSystem'
459xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.65.1' of type `rewriteURI'
460xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.66.0' of type `rewriteSystem'
461xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.66.0' of type `rewriteURI'
462xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.66.1' of type `rewriteSystem'
463xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.66.1' of type `rewriteURI'
464xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.67.0' of type `rewriteSystem'
465xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.67.0' of type `rewriteURI'
466xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.67.2' of type `rewriteSystem'
467xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.67.2' of type `rewriteURI'
468xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.68.0' of type `rewriteSystem'
469xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.68.0' of type `rewriteURI'
470xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.68.1' of type `rewriteSystem'
471xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.68.1' of type `rewriteURI'
472xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.69.0' of type `rewriteSystem'
473xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.69.0' of type `rewriteURI'
474xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.69.1' of type `rewriteSystem'
475xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.69.1' of type `rewriteURI'
476xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.70.0' of type `rewriteSystem'
477xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.70.0' of type `rewriteURI'
478xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.70.1' of type `rewriteSystem'
479xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.70.1' of type `rewriteURI'
480xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.71.0' of type `rewriteSystem'
481xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.71.0' of type `rewriteURI'
482xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.71.1' of type `rewriteSystem'
483xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/1.71.1' of type `rewriteURI'
484xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/current' of type `rewriteSystem'
485xmlcatmgr: entry already exists for `http://docbook.sourceforge.net/release/xsl/current' of type `rewriteURI'
486 done
487Installing dri2proto-2.6... done
488Installing dri-7.11.2_3,2...Installing libXxf86vm-1.1.1...Installing xf86vidmodeproto-2.3.1... done
489 done
490Installing libdrm-2.4.31_1...Installing libpciaccess-0.12.1...Installing pciids-20130327... done
491 done
492 done
493 done
494Installing dvd+rw-tools-7.1... done
495Installing emacs-24.3,3...Installing fribidi-0.19.2_1... done
496Installing gd-2.0.35_8,1... done
497Installing giflib-4.2.1_1... done
498Installing gmp-5.1.1... done
499Installing gnutls-2.12.23_1...Installing libtasn1-2.14... done
500Installing nettle-2.6... done
501Installing p11-kit-0.16.3... done
502 done
503Installing libotf-0.9.12... done
504Installing m17n-db-1.6.3... done
505Installing m17n-lib-1.6.3_1... done
506 done
507Installing enscript-a4-1.6.4_5... done
508Installing epdfview-0.1.8_4...Installing openjpeg-1.5.0_2... done
509Installing poppler-data-0.4.6... done
510Installing poppler-glib-0.22.2...Installing poppler-0.22.2... done
511 done
512 done
513Installing esound-0.2.41_1...Installing libaudiofile-0.2.7... done
514 done
515Installing evolution-data-server-2.32.1_4...Installing glib-networking-2.34.2...Installing gsettings-desktop-schemas-3.0.1...warning: undefined reference to <schema id='org.gnome.desktop.default-applications.at'/>
516 done
517Installing libproxy-0.4.6... done
518 done
519Installing gnome-icon-theme-2.31.0_2... done
520Installing libgdata-0.6.6_1...Installing libgnome-keyring-2.32.0_4... done
521Installing libsoup-gnome-2.40.3_2...Installing libsoup-2.40.3... done
522 done
523 done
524Installing libgweather-2.30.3_1... done
525Installing libical-0.48... done
526Installing nspr-4.9.6... done
527Installing nss-3.14.3... done
528 done
529Installing flac-1.2.1_3... done
530Installing fluxbox-tenr-styles-pack-20071215_3...Installing fluxbox-1.3.5...Installing xmessage-1.0.4... done
531 done
532 done
533Installing font-adobe-100dpi-1.0.3... done
534Installing font-adobe-75dpi-1.0.3... done
535Installing font-adobe-utopia-100dpi-1.0.4... done
536Installing font-adobe-utopia-75dpi-1.0.4... done
537Installing font-adobe-utopia-type1-1.0.4... done
538Installing font-alias-1.0.3... done
539Installing font-arabic-misc-1.0.3... done
540Installing font-bh-100dpi-1.0.3... done
541Installing font-bh-75dpi-1.0.3... done
542Installing font-bh-lucidatypewriter-100dpi-1.0.3... done
543Installing font-bh-lucidatypewriter-75dpi-1.0.3... done
544Installing font-bh-type1-1.0.3... done
545Installing font-bitstream-100dpi-1.0.3... done
546Installing font-bitstream-75dpi-1.0.3... done
547Installing font-bitstream-type1-1.0.3... done
548Installing font-cronyx-cyrillic-1.0.3... done
549Installing font-cursor-misc-1.0.3... done
550Installing font-daewoo-misc-1.0.3... done
551Installing font-dec-misc-1.0.3... done
552Installing font-ibm-type1-1.0.3... done
553Installing font-isas-misc-1.0.3... done
554Installing font-jis-misc-1.0.3... done
555Installing font-micro-misc-1.0.3... done
556Installing font-misc-cyrillic-1.0.3... done
557Installing font-misc-misc-1.1.2... done
558Installing font-mutt-misc-1.0.3... done
559Installing font-schumacher-misc-1.1.2... done
560Installing font-screen-cyrillic-1.0.4... done
561Installing font-sony-misc-1.0.3... done
562Installing font-sun-misc-1.0.3... done
563Installing font-winitzki-cyrillic-1.0.3... done
564Installing font-xfree86-type1-1.0.4... done
565Installing fontcacheproto-0.1.3... done
566Installing fonts-indic-2.1.5_1.../lib/X11/fonts/fonts-indic: skipping, no such directory
567/var/db/fontconfig: cleaning cache directory
568/root/.fontconfig: not cleaning non-existent cache directory
569/usr/local/bin/fc-cache: succeeded
570 done
571Installing fontsproto-2.1.1... done
572Installing foo2zjs-20110609_2...Installing foomatic-db-20090530_2... done
573Installing foomatic-filters-4.0.7_1...Installing mpage-2.5.6... done
574 done
575 done
576Installing foomatic-db-engine-4.0.7,2... done
577Installing fr-aspell-0.50.3_1,1... done
578Installing freeglut-2.8.0...Installing libGL-7.11.2_3... done
579Installing libGLU-7.11.2_2... done
580 done
581Installing fusefs-exfat-1.0.0...Installing fusefs-kmod-0.3.9.p1.20080208_11... done
582Installing fusefs-libs-2.9.2... done
583Installing libublio-20070103... done
584 done
585Installing fusefs-ext4fuse-0.1.3,1... done
586Installing fusefs-ntfs-2012.1.15... done
587Installing gcc-4.6.3...Installing mpc-0.9...Installing mpfr-3.1.2... done
588 done
589 done
590Installing gdm-2.30.7_2...Installing getopt-1.1.5... done
591Installing gnome-desktop-2.32.1_3...Installing gnome-doc-utils-0.20.3...Installing libxslt-1.1.28... done
592Installing py27-libxml2-2.8.0... done
593Installing rarian-0.8.1... done
594 done
595Installing libglade2-2.6.4_5... done
596Installing py27-cairo-1.8.10_1... done
597Installing py27-gobject-2.28.6_3... done
598Installing py27-gtk-2.24.0_1... done
599Installing startup-notification-0.12_1... done
600 done
601Installing gnome-menus-2.30.5... done
602Installing gnome-mime-data-2.18.0_4... done
603Installing gnome-panel-2.32.1_2...Installing gnome-vfs-2.24.4_1...Installing hal-0.5.14_20...Installing libvolume_id-0.81.1... done
604===> Creating users and/or groups.
605Creating group 'haldaemon' with gid '560'.
606Creating user 'haldaemon' with uid '560'.
607 done
608Installing samba36-libsmbclient-3.6.13... done
609 done
610Installing libXres-1.0.5... done
611Installing libart_lgpl-2.3.21,1... done
612Installing libbonoboui-2.24.4_1...Installing libcanberra-0.28_3... done
613Installing libgnome-2.32.0_1... done
614Installing libgnomecanvas-2.30.3_1... done
615 done
616Installing libwnck-2.30.6_1... done
617 done
618Installing gnome-session-2.32.1_2...Installing gnome-settings-daemon-2.32.1_4...Installing gstreamer-plugins-good-0.10.31,3...Installing gstreamer-plugins-0.10.36_3,3...Installing gstreamer-0.10.36... done
619Installing libXv-1.0.6,1...Installing videoproto-2.3.1... done
620 done
621Installing orc-0.4.16_1... done
622 done
623 done
624Installing iso-codes-3.40... done
625Installing libXxf86misc-1.0.3...Installing xf86miscproto-0.9.3... done
626 done
627Installing libgnomekbd-2.32.0_1...Installing libxkbfile-1.0.7... done
628Installing libxklavier-5.0_1,1...Installing xkbcomp-1.2.4... done
629 done
630 done
631Installing libnotify-0.7.3_2... done
632Installing libsamplerate-0.1.8_3...Installing libsndfile-1.0.25_2... done
633 done
634Installing pulseaudio-0.9.23_2...Installing speex-1.2.r1_4,1... done
635===> Creating users and/or groups.
636Creating group 'pulse' with gid '563'.
637Creating group 'pulse-access' with gid '564'.
638Creating group 'pulse-rt' with gid '557'.
639Creating user 'pulse' with uid '563'.
640 done
641Installing xrdb-1.0.9... done
642 done
643Installing libXxf86dga-1.1.2...Installing xf86dgaproto-2.1... done
644 done
645Installing upower-0.9.7_1... done
646Installing xdpyinfo-1.3.0... done
647 done
648Installing libdmx-1.1.1... done
649Installing polkit-gnome-0.102... done
650Installing zenity-2.32.1_2... done
651===> Creating users and/or groups.
652Creating group 'gdm' with gid '92'.
653Creating user 'gdm' with uid '92'.
654 done
655Installing gle-3.1.0_3... done
656Installing gnome-keyring-2.32.1_2...warning: undefined reference to <schema id='org.gnome.desktop.default-applications.at'/>
657 done
658Installing gnome-mount-0.8_10...Installing policykit-gnome-0.9.2_6... done
659 done
660Installing gnome-power-manager-2.32.0_2...Installing unique-1.1.6_4... done
661 done
662Installing gnupg-2.0.19_3... done
663Installing gsmartcontrol-0.8.7_1...Installing gtkmm-2.24.2_1...Installing pangomm-2.28.4... done
664 done
665Installing smartmontools-6.1... done
666 done
667Installing gstreamer-plugins-bad-0.10.23,3... done
668Installing gstreamer-plugins-cdaudio-0.10.23,3...Installing libcdaudio-0.99.12p2_2... done
669 done
670Installing gstreamer-plugins-cdparanoia-0.10.36,3... done
671Installing gtk-theme-switch-2.0.0.r2_5... done
672Installing gtk2-qtcurve-theme-1.8.16... done
673Installing gtk-3.6.4...warning: undefined reference to <schema id='org.gnome.desktop.default-applications.at'/>
674 done
675Installing gutenprint-base-5.2.8... done
676Installing gutenprint-cups-5.2.8_1... done
677Installing gutenprint-foomatic-5.2.8_1... done
678Installing gutenprint-ijs-5.2.8...Installing libijs-0.35_1... done
679 done
680Installing gutenprint-5.2.8... done
681Installing gvfs-1.12.3...Installing libcddb-1.3.2_1... done
682Installing libcdio-0.83_1... done
683Installing libexif-0.6.21... done
684Installing libgphoto2-2.4.14_3... done
685warning: undefined reference to <schema id='org.gnome.desktop.default-applications.at'/>
686 done
687Installing hu-aspell-0.99.4.2.0_1,2... done
688Installing ibus-m17n-1.3.3_2...Installing ibus-1.4.1...Installing py27-dbus-0.84.0... done
689Installing py27-notify-0.1.1_9... done
690Installing py27-xdg-0.19... done
691 done
692 done
693Installing ibus-qt-1.3.1_3...Installing icu-50.1.2... done
694Installing libXfontcache-1.0.5... done
695Installing qt4-corelib-4.8.4_1... done
696Installing qt4-dbus-4.8.4...Installing qt4-xml-4.8.4... done
697 done
698Installing qt4-gui-4.8.4...Installing xdg-utils-1.0.2_8...Installing xprop-1.2.1... done
699Installing xset-1.2.2_1... done
700 done
701 done
702 done
703Installing ibus-table-1.3.9.20110827_2...Installing py27-sqlite3-2.7.3_3... done
704 done
705Installing iceauth-1.0.5... done
706Installing idesk-0.7.5_10...Installing imlib2-1.4.5_2,2...Installing libid3tag-0.15.1b... done
707 done
708 done
709Installing iw-aspell-1.0.0_1,2... done
710Installing ja-anthy-9100h... done
711Installing ja-font-vlgothic-20121109.../usr/local/lib/X11/fonts/TTF: caching, new cache contents: 15 fonts, 0 dirs
712/var/db/fontconfig: cleaning cache directory
713/usr/local/bin/fc-cache: succeeded
714 done
715Installing ja-ibus-anthy-1.2.7_2,1... done
716Installing jailme-0.1... done
717Installing kdehier4-1.0.11... done
718Installing ko-baekmukfonts-ttf-2.2... done
719Installing lcms-1.19_1,1... done
720Installing libFS-1.0.3... done
721Installing libXScrnSaver-1.2.1...Installing scrnsaverproto-1.2.1... done
722 done
723Installing libXTrap-1.0.0...Installing trapproto-3.4.3... done
724 done
725Installing libXevie-1.0.3... done
726Installing libXfont-1.4.4_1,1... done
727Installing libXvMC-1.0.6... done
728Installing libaacs-0.3.0... done
729Installing libbluray-0.2.2,1... done
730Installing libdvdcss-1.2.12... done
731Installing libgnomeui-2.24.4_1... done
732Installing libgtop-2.28.3_2... done
733Installing libkate-0.4.1_2... done
734Installing libmng-1.0.10_2... done
735Installing liboldX-1.0.1... done
736Installing libslang2-2.2.4_4... done
737Installing libv4l-0.8.8_1... done
738Installing libvdpau-0.6... done
739Installing libxkbui-1.0.2_1... done
740Installing linux-f10-alsa-lib-1.0.21_3...Installing linux_base-f10-10_5...grep: /etc/fstab: No such file or directory
741
742+++ Some programs may need linprocfs, please add it to /etc/fstab! +++
743
744Running linux ldconfig...
745 done
746 done
747Installing linux-f10-alsa-plugins-oss-1.0.21_3... done
748Installing linux-f10-atk-1.24.0... done
749Installing linux-f10-cairo-1.8.0_2...Installing linux-f10-expat-2.0.1... done
750Installing linux-f10-fontconfig-2.6.0... done
751Installing linux-f10-png-1.2.37_2... done
752Installing linux-f10-xorg-libs-7.4_1... done
753 done
754Installing linux-f10-cups-libs-1.3.11_1...Installing linux-f10-gnutls-2.4.2_1...Installing linux-f10-libgcrypt-1.4.4... done
755Installing linux-f10-libgpg-error-1.6... done
756Installing linux-f10-libtasn1-1.5... done
757 done
758 done
759Installing linux-f10-curl-7.19.6_1...Installing linux-f10-cyrus-sasl2-2.1.22_1... done
760Installing linux-f10-openldap-2.4.12_1... done
761 done
762Installing linux-f10-flashplugin-11.2r202.275...Installing linux-f10-gtk2-2.14.7_4...Installing linux-f10-jpeg-6b... done
763Installing linux-f10-pango-1.28.3...
764(pango-querymodules-32:9093): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
765Cannot load module /usr/lib/pango/1.6.0/modules/pango-thai-lang.so: libthai.so.0: cannot open shared object file: No such file or directory
766/usr/lib/pango/1.6.0/modules/pango-thai-lang.so does not export Pango module API
767 done
768Installing linux-f10-tiff-3.8.2... done
769
770(process:9101): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
771 done
772Installing linux-f10-libssh2-0.18...Installing linux-f10-openssl-0.9.8g... done
773 done
774Installing linux-f10-nspr-4.7.6... done
775Installing linux-f10-nss-3.12.3.99.3_1...Installing linux-f10-sqlite3-3.5.9_1... done
776 done
777 done
778Installing linux_dvbwrapper-kmod-1.0_1... done
779Installing lua-5.1.5_5... done
780Installing luit-1.1.0_1... done
781Installing lzo2-2.06... done
782Installing mc-4.8.1.7... done
783Installing metacity-2.30.3_1... done
784Installing mplayer-skins-1.1.3_1... done
785Installing mplayer-1.1.r20130308... done
786Installing mtools-4.0.10_3... done
787Installing neon29-0.29.6_4... done
788Installing netatalk-2.2.4,1... done
789Installing nspluginwrapper-1.4.4... done
790Installing nss_ldap-1.265_7... done
791Installing nss_mdns-0.10_2... done
792Installing numlockx-1.2... done
793Installing ossec-hids-local-2.7...===> Creating users and/or groups.
794Creating group 'ossec' with gid '966'.
795Creating user 'ossec' with uid '966'.
796Creating user 'ossecm' with uid '967'.
797Creating user 'ossecr' with uid '968'.
798 done
799Installing pam_ldap-1.8.6_2... done
800Installing pam_mkhomedir-0.2... done
801Installing pcbsd-utils-qt4-22146...Installing pcbsd-utils-22144...Installing squashfs-tools-4.2... done
802Installing subversion-1.7.9... done
803Added new repo: "Official PC-BSD Repository" to the database.
804 done
805Installing phonon-gstreamer-4.6.3...Installing phonon-4.6.0_1...Installing qt4-declarative-4.8.4...Installing qt4-network-4.8.4... done
806Installing qt4-opengl-4.8.4... done
807Installing qt4-script-4.8.4... done
808Installing qt4-sql-4.8.4... done
809Installing qt4-svg-4.8.4... done
810Installing qt4-xmlpatterns-4.8.4... done
811 done
812Installing qt4-qtestlib-4.8.4... done
813Installing qzeitgeist-0.8.0... done
814 done
815 done
816Installing qt4-accessible-4.8.4...Installing qt4-qt3support-4.8.4... done
817 done
818Installing qt4-assistant-4.8.4...Installing qt4-clucene-4.8.4... done
819Installing qt4-doc-4.8.4... done
820Installing qt4-help-4.8.4...Installing qt4-sqlite-plugin-4.8.4... done
821 done
822Installing qt4-webkit-4.8.4_1... done
823 done
824Installing qt4-codecs-cn-4.8.4... done
825Installing qt4-codecs-jp-4.8.4... done
826Installing qt4-codecs-kr-4.8.4... done
827Installing qt4-codecs-tw-4.8.4... done
828Installing qt4-graphicssystems-opengl-4.8.4... done
829Installing qt4-help-tools-4.8.4... done
830Installing qt4-iconengines-4.8.4... done
831Installing qt4-imageformats-4.8.4... done
832Installing qt4-inputmethods-4.8.4... done
833Installing qt4-l10n-4.8.4... done
834Installing qt4-linguist-4.8.4... done
835Installing qt4-makeqpf-4.8.4... done
836Installing qt4-moc-4.8.4... done
837Installing qt4-multimedia-4.8.4... done
838Installing qt4-pixeltool-4.8.4... done
839Installing qt4-porting-4.8.4... done
840Installing qt4-qdbusviewer-4.8.4... done
841Installing qt4-qmake-4.8.4... done
842Installing qt4-qmlviewer-4.8.4... done
843Installing qt4-qtconfig-4.8.4... done
844Installing qt4-qtsolutions-singleapplication-20110722_1... done
845Installing qt4-qvfb-4.8.4... done
846Installing qt4-rcc-4.8.4... done
847Installing qt4-scripttools-4.8.4... done
848Installing qt4-uic3-4.8.4... done
849Installing qt4-uic-4.8.4... done
850Installing qt4-xmlpatterns-tool-4.8.4... done
851 done
852Installing pciutils-3.1.9... done
853Installing pefs-kmod-2013.02.03... done
854Installing pinentry-qt4-0.8.1_2... done
855Installing pl-aspell-6.0.20061121.0_1,1... done
856Installing pwcview-1.4.1_4...Installing sdl-1.2.15_2,2... done
857 done
858Installing py27-cups-1.9.63... done
859Installing py27-fail2ban-0.8.8_1... done
860Installing py27-xml-0.8.4_2... done
861Installing qt4-style-qtcurve-1.8.14... done
862Installing rar-4.2.0,3... done
863Installing rdesktop-1.7.1_1... done
864Installing readline-6.2_1... done
865Installing rpm2cpio-1.3_1... done
866Installing rsync-3.0.9_3... done
867Installing ru-aspell-0.99.f7.1_1,2... done
868Installing ruby-1.8.7.371,1... done
869Installing sane-backends-1.0.23_1...===> Creating users and/or groups.
870Creating group 'saned' with gid '194'.
871Creating user 'saned' with uid '194'.
872mkdir: /usr/local/etc/sane.d/dll.d: File exists
873mkdir: /usr/local/share/sane: File exists
874mkdir: /usr/local/share/sane/artec_eplus48u: File exists
875mkdir: /usr/local/share/sane/epjitsu: File exists
876mkdir: /usr/local/share/sane/gt68xx: File exists
877mkdir: /usr/local/share/sane/snapscan: File exists
878 done
879Installing sessreg-1.0.8... done
880Installing setxkbmap-1.3.0... done
881Installing smproxy-1.0.5... done
882Installing splix-2.0.0_4... done
883Installing sudo-1.8.6.p7... done
884Installing swapexd-0.3_1... done
885Installing system-config-printer-1.1.16_6... done
886Installing tcl-8.5.13... done
887Installing twm-1.0.7... done
888Installing uhidd-0.2.1_1... done
889Installing uk-aspell-1.4.0.0_1,2... done
890Installing vi-aspell-0.01.1.1_1,2... done
891Installing vim-7.3.669_1... done
892Installing volman-0.7_1... done
893Installing vorbis-tools-1.4.0_4,3... done
894Installing webcamd-3.9.0.5...===> Creating users and/or groups.
895Creating group 'webcamd' with gid '145'.
896Creating user 'webcamd' with uid '145'.
897 done
898Installing webfonts-0.30_6.../lib/X11/fonts/webfonts: skipping, no such directory
899/var/db/fontconfig: cleaning cache directory
900/root/.fontconfig: not cleaning non-existent cache directory
901/usr/local/bin/fc-cache: succeeded
902 done
903Installing x11perf-1.5.4... done
904Installing xauth-1.0.7... done
905Installing xbacklight-1.1.2... done
906Installing xbrightness-0.3... done
907Installing xcalc-1.0.5... done
908Installing xclock-1.0.6... done
909Installing xcmsdb-1.0.4... done
910Installing xconsole-1.0.5... done
911Installing xcursor-themes-1.0.3_1... done
912Installing xcursorgen-1.0.5... done
913Installing xdriinfo-1.0.4... done
914Installing xev-1.2.1... done
915Installing xf86-input-keyboard-1.6.1...Installing xkeyboard-config-2.5.1... done
916Installing xorg-server-1.10.6_2,1... done
917 done
918Installing xf86-input-mouse-1.7.1_1... done
919Installing xf86-input-synaptics-1.5.0... done
920Installing xf86-video-ati-6.14.3_1... done
921Installing xf86-video-intel-2.17.0_1... done
922Installing xf86-video-mach64-6.9.0... done
923Installing xf86-video-nv-2.1.18_1... done
924Installing xf86-video-openchrome-0.2.904_3... done
925Installing xf86-video-r128-6.8.1_3... done
926Installing xf86-video-radeonhd-1.3.0_5... done
927Installing xf86-video-vesa-2.3.0_2... done
928Installing xf86dga-1.0.3... done
929Installing xgamma-1.0.5... done
930Installing xgc-1.0.4... done
931Installing xhost-1.0.5... done
932Installing xinit-1.3.2,1... done
933Installing xinput-1.5.4... done
934Installing xkbevd-1.1.3... done
935Installing xkbutils-1.0.4... done
936Installing xkill-1.0.3... done
937Installing xlsatoms-1.1.1... done
938Installing xlsclients-1.1.2... done
939Installing xmodmap-1.0.7... done
940Installing xorg-apps-7.5.2_1...Installing xpr-1.0.4... done
941Installing xrandr-1.3.5... done
942Installing xrefresh-1.0.4... done
943Installing xsetmode-1.0.0... done
944Installing xsetroot-1.1.1... done
945Installing xterm-291... done
946Installing xvinfo-1.1.2... done
947Installing xwd-1.0.5... done
948Installing xwininfo-1.1.2... done
949Installing xwud-1.0.4... done
950 done
951Installing xorg-docs-1.6,1... done
952Installing xorg-drivers-7.5.2... done
953Installing xorg-fonts-100dpi-7.5.1... done
954Installing xorg-fonts-75dpi-7.5.1... done
955Installing xorg-fonts-cyrillic-7.5.1... done
956Installing xorg-fonts-miscbitmaps-7.5.1... done
957Installing xorg-fonts-type1-7.5.1... done
958Installing xorg-fonts-7.5.1... done
959Installing xorg-libraries-7.5.1...Installing xtrans-1.2.6... done
960 done
961Installing xorg-7.5.2... done
962Installing xsane-0.998_3... done
963Installing xscreensaver-gnome-5.12_1... done
964Installing xv-3.10a_15... done
965Installing xvkbd-3.3... done
966Installing zh-ibus-chewing-1.4.3...Installing zh-libchewing-0.3.3... done
967 done
968Installing zh-ibus-pinyin-1.4.0_1... done
969Installing zip-3.0... done
970 done
971====
972Note that some of the standard modules are provided as separate
973ports since they require extra dependencies:
974
975bsddb           databases/py-bsddb
976gdbm            databases/py-gdbm
977sqlite3         databases/py-sqlite3
978tkinter         x11-toolkits/py-tkinter
979
980Install them as needed.
981====
982===============================================================================
983
984Gamin will only provide realtime notification of changes for at most n files,
985where n is the minimum value between (kern.maxfiles * 0.7) and
986(kern.maxfilesperproc - 200). Beyond that limit, files will be polled.
987
988If you often open several large folders with Nautilus, you might want to
989increase the kern.maxfiles tunable (you do not need to set
990kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles).
991
992For a typical desktop, add the following line to /boot/loader.conf, then
993reboot the system:
994
995    kern.maxfiles="25000"
996
997The behavior of gamin can be controlled via the various gaminrc files.
998See http://www.gnome.org/~veillard/gamin/config.html on how to create
999these files.  In particular, if you find gam_server is taking up too much
1000CPU time polling for changes, something like the following may help
1001in one of the gaminrc files:
1002
1003# reduce polling frequency to once per 10 seconds
1004# for UFS file systems in order to lower CPU load
1005fsset ufs poll 10
1006
1007===============================================================================
1008IMPORTANT - READ CAREFULLY: Please read the COPYRIGHT included with these fonts
1009before using.  The copyright can be found at /usr/local/lib/X11/fonts/bitstream-vera/COPYRIGHT.TXT.  To
1010use these fonts, follow the instructions below.
1011
1012Make sure that the freetype module is loaded.  If it is not, add the following
1013line to the "Modules" section of your X Windows configuration file:
1014
1015        Load "freetype"
1016
1017Add the following line to the "Files" section of X Windows configuration file:
1018
1019        FontPath "/usr/local/lib/X11/fonts/bitstream-vera/"
1020
1021Note: your X Windows configuration file is typically /etc/X11/xorg.conf
1022Note: in order to use the script "dvipdf", dvips must be installed.
1023This program may be provided by either print/dvips or print/dvipsk-tetex
1024(print/dvipsk-tetex may be preferable since it doesn't conflict with
1025tetex things).
1026
1027FAPIfontmap and FAPIcidfmap in /usr/local/share/ghostscript/9.06/Resource/Init
1028have to be configured if you want to use FAPI feature.
1029==========================================================================
1030NOTE: In order to compile examples for liblqr, you will
1031also need pngwriter port (/usr/ports/graphics/pngwriter).
1032Examples are located in /usr/local/share/examples/liblqr-1
1033==========================================================================
1034===========================================================================
1035
1036Note: The location of the cdrtools `defaults' files has been set to
1037
1038        /usr/local/etc
1039
1040This is the FreeBSD ports standard config file location, NOT the cdrtools
1041standard location, which is /etc/default.
1042
1043The reason for this is that FreeBSD ports and packages should not use
1044configuration files outside of /usr/local.
1045
1046===========================================================================
1047**************************************************************************
1048The executable for Exuberant CTAGS is installed as /usr/local/bin/exctags
1049**************************************************************************
1050======================================================================
1051
1052To enable printing with local printer you need to give group 'cups'
1053r/w access to printer device:
1054
10551) Add following to /etc/devfs.rules (create if it doesn't exist):
1056
1057[system=10]
1058# FreeBSD 7.x
1059add path 'unlpt*' mode 0660 group cups
1060add path 'ulpt*' mode 0660 group cups
1061add path 'lpt*' mode 0660 group cups
1062# FreeBSD 8.x
1063add path 'usb*' mode 0770 group cups
1064add path 'ugen*' mode 0660 group cups
1065
10662) And following to /etc/rc.conf:
1067
1068devfs_system_ruleset="system"
1069
10703) Restart devfs: /etc/rc.d/devfs restart
1071
1072If your system supports 'devd' you can copy
1073$PREFIX/share/examples/cups/ulpt-cupsd.conf to $PREFIX/etc/devd/
1074
1075To enable printing under Gimp and MS-Windows clients do the following:
1076
10771) Uncomment application/octet-stream line in mime.types
10782) Uncomment application/octet-stream line in mime.convs
10793) Restart cupsd
1080
1081If you are using libusb, it is important that no device driver, e.g.
1082ulpt(4) is attached to the device you wish to use. In this case please
1083ensure the cups user and group has read/write access to /dev/ugen*
1084
1085If you are using a USB printer wtih FreeBSD 8.0 or later, you will
1086need to find the proper /dev/usb/* device pointed at by the /dev/ugen*
1087entry. Follow the instructions for devfs.rules as above, but append a
1088rule similar to the following for a printer attached as /dev/ugen0.2:
1089
1090add path 'usb/0.2.*' mode 0660 group cups
1091======================================================================
1092************************************************************
1093
1094The OpenLDAP client package has been successfully installed.
1095
1096Edit
1097  /usr/local/etc/openldap/ldap.conf
1098to change the system-wide client defaults.
1099
1100Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at
1101  http://www.OpenLDAP.org/faq/index.cgi?file=3
1102for more information.
1103
1104************************************************************
1105===============================================================================
1106Samba3 *package* now doesn't include ADS support due the portability problems
1107with Kerberos5 libraries on different installations. You need to compile the
1108port yourself to get this functionality.
1109
1110For additional hints and directions, please, look into the README.FreeBSD file.
1111===============================================================================
1112CUPS smb backend is now installed.
1113
1114Please configure your samba environment if
1115you haven't already done so. To do so edit
1116
1117/usr/local/etc/smb.conf
1118
1119You can then add a new printer to CUPS.
1120smbspool(8) manpage describes device URI
1121format. In most cases (latest samba 2.x
1122and samba 3.x), it's something like this:
1123
1124smb://username:password@server/printer
1125smb://username:password@workgroup/server/printer
1126
1127But a CUPS article describes another syntax,
1128so beware.
1129*** NOTE ***
1130To successfully create an installation of Debian GNU/kFreeBSD
1131debootstrap requires the following kernel modules loaded:
1132
1133fdescfs linprocfs linsysfs tmpfs
1134Make sure that the freetype module is loaded.  If it is not, add the following
1135line to the "Modules" section of your X Windows configuration file:
1136
1137        Load "freetype"
1138
1139Add the following line to the "Files" section of X Windows configuration file:
1140
1141        FontPath "/usr/local/lib/X11/fonts/dejavu/"
1142
1143Note: your X Windows configuration file is typically /etc/X11/XF86Config
1144if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org.
1145The following catalogs are installed:
1146
1147 1) /usr/local/share/sgml/catalog
1148
1149   The top level catalog for SGML stuff.  It is not changed
1150   by any ports/packages except textproc/xmlcatmgr.
1151
1152 2) /usr/local/share/sgml/catalog.ports
1153
1154   This catalog is for handling SGML stuff installed under
1155   /usr/local/share/sgml.  It is changed by ports/packages.
1156
1157 3) /usr/local/share/xml/catalog
1158
1159   The top level catalog for XML stuff.  It is not changed
1160   by any ports/packages except textproc/xmlcatmgr.
1161
1162 4) /usr/local/share/xml/catalog.ports
1163
1164   This catalog is for handling XML stuff installed under
1165   /usr/local/share/xml.  It is changed by ports/packages.
1166The ESounD daemon (esd) must be started on a per-user basis.  This is typically
1167done by the Session Manager in GNOME.  However, if you are not using the
1168GNOME Desktop, you will need to add something like the following to your
1169X Windows initialization script:
1170
1171esd -terminate -nobeeps -as 2
1172###############################################################################
1173
11741) Please read the detailed installation instructions in the file:
1175
1176   * /usr/local/share/doc/foo2zjs/INSTALL
1177
11782) Go to tmp directory and run getweb script.
1179
1180   # cd /tmp && getweb all
1181
11823) Copy icm and img files.
1183
1184   # cp DL*.icm CP*.icm km2430*.icm /usr/local/share/foo2zjs/icm && \
1185     cp sihp*.img /usr/local/share/foo2zjs/firmware && \
1186     cp hpclj26*.icm km2430*.icm /usr/local/share/foo2hp/icm && \
1187     rm *.icm *.img
1188
11894) Enjoy it ;)
1190
1191###############################################################################
1192==============================================================================
1193
1194In order to automatically load the fuse module on startup, you need to:
1195
1196 - Add fusefs_enable="YES" to your /etc/rc.conf.
1197 - Run "/usr/local/etc/rc.d/fusefs start" (for the first time).
1198
1199Set "sysctl vfs.usermount=1" if you want to be able to mount fuse devices as
1200an ordinary user.
1201
1202Now fuse filesystems (sysutils/fusefs-*) can be mounted at startup from
1203/etc/fstab with the "late" parameter. This requires a symlink in /usr/sbin
1204named "mount_<fstype>", which is not created by all the fusefs ports.
1205
1206Note that the rc.d script will unmount all fuse filesystems when called with
1207"stop" (in reverse order in case of nested mounts), so it can unload the
1208kernel module.
1209
1210==============================================================================
1211Install the fuse kernel module to use this port.
1212==============================================================================
1213
1214NTFS-3G has been installed, for information, known issues and how to report
1215bugs see the FreeBSD README:
1216
1217/usr/local/share/doc/ntfs-3g/README.FreeBSD
1218
1219Also see the official README (but has some Linux specific parts).
1220
1221==============================================================================
1222GDM is installed.
1223
1224Do _NOT_ use /etc/ttys to start gdm at boot time.  This will result in gdm
1225hanging or restarting constantly. Instead, add gdm_enable="YES" to
1226/etc/rc.conf. GDM will be started automatic on the next reboot.
1227###############################################################################
1228                                A T T E N T I O N
1229
1230In order to use gpg-agent, you need to install a pinentry dialog.
1231
1232The following ports of pinentry dialogs are available:
1233
1234security/pinentry-curses        (ncurses based dialog)
1235security/pinentry-gtk           (GTK 1.2 based dialog)
1236security/pinentry-gtk2          (GTK 2.x based dialog)
1237security/pinentry-qt            (QT3 based dialog)
1238security/pinentry-q4            (QT4 based dialog)
1239
1240###############################################################################
1241smartmontools has been installed
1242
1243To check the status of drives, use the following:
1244
1245        /usr/local/sbin/smartctl -a /dev/ad0    for first ATA/SATA drive
1246        /usr/local/sbin/smartctl -a /dev/da0    for first SCSI drive
1247        /usr/local/sbin/smartctl -a /dev/ada0   for first SATA drive
1248
1249To include drive health information in your daily status reports,
1250add a line like the following to /etc/periodic.conf:
1251        daily_status_smart_devices="/dev/ad0 /dev/da0"
1252substituting the appropriate device names for your SMART-capable disks.
1253
1254To enable drive monitoring, you can use /usr/local/sbin/smartd.
1255A sample configuration file has been installed as
1256/usr/local/etc/smartd.conf.sample
1257Copy this file to /usr/local/etc/smartd.conf and edit appropriately
1258
1259To have smartd start at boot
1260        echo 'smartd_enable="YES"' >> /etc/rc.conf
1261-------------------------------------------------------------------
1262ibus installation finished. To use ibus, please do the following:
1263
1264If you are using bash, please add following lines to your $HOME/.bashrc:
1265
1266export XIM=ibus
1267export GTK_IM_MODULE=ibus
1268export QT_IM_MODULE=xim
1269export XMODIFIERS=@im=ibus
1270export XIM_PROGRAM="ibus-daemon"
1271export XIM_ARGS="--daemonize --xim"
1272
1273If you are using tcsh, please add following lines to your $HOME/.cshrc:
1274
1275setenv XIM ibus
1276setenv GTK_IM_MODULE ibus
1277setenv QT_IM_MODULE xim
1278setenv XMODIFIERS @im=ibus
1279setenv XIM_PROGRAM ibus-daemon
1280setenv XIM_ARGS "--daemonize --xim"
1281
1282If you are using KDE4, you may create a shell script in $HOME/.kde4/env,
1283and add following lines:
1284
1285#!/bin/sh
1286export XIM=ibus
1287export GTK_IM_MODULE=ibus
1288export QT_IM_MODULE=xim
1289export XMODIFIERS=@im=ibus
1290export XIM_PROGRAM="ibus-daemon"
1291export XIM_ARGS="--daemonize --xim"
1292
1293Following input methods/engines are available in ports:
1294
1295chinese/ibus-chewing            Chewing engine for IBus
1296chinese/ibus-pinyin             The PinYin input method
1297japanese/ibus-anthy             Anthy engine for IBus
1298japanese/ibus-mozc              Mozc engine for IBus
1299japanese/ibus-skk               SKK engine for IBus
1300korean/ibus-hangul              Hangul engine for IBus
1301textproc/ibus-kmfl              KMFL IMEngine for IBus framework
1302textproc/ibus-m17n              The m17n IMEngine for IBus framework
1303textproc/ibus-table             Table based IM framework for IBus
1304
1305and QT4 input method module, textproc/ibus-qt.
1306
1307If ibus cannot start or the panel does not appear, please ensure
1308that you are using up-to-date python.
1309There's a bug in python 2.5, which may prevent the panel from appearing.
1310-------------------------------------------------------------------
1311======================================================================
1312
1313Qt 4 can be built with optional support for:
1314 - Common UNIX Printing System (CUPS) (enabled by default)
1315 - Network Audio System (NAS)
1316 - Qt style that renders using GTK (QGTKSTYLE)
1317
1318In order to enable them, you have to add
1319        QT4_OPTIONS=    CUPS NAS QGTKSTYLE
1320to your /etc/make.conf and compile devel/qt4-corelib and
1321x11-toolkits/qt4-gui ports.
1322
1323Attention! Whenever you change the QT4_OPTIONS both
1324devel/qt4-corelib and x11-toolkits/qt4-gui ports must be rebuilt!
1325
1326======================================================================
1327======================================================================
1328
1329Qt paint engine makes common use of shared memory. To avoid MIT-SHM
1330errors (i.e., blank windows), you probably need to raise shared memory
1331limits in loader.conf(5). The following should be safe values for the
1332KDE Plasma Desktop:
1333
1334kern.ipc.shmall=32768
1335kern.ipc.shmmni=1024
1336kern.ipc.shmseg=1024
1337
1338======================================================================
1339--------------------------------------------------------
1340ibus-qt install finished. You may select ibus as the
1341input method in qtconfig.
1342
1343--------------------------------------------------------
1344###############################################################################
1345
1346Idesk was installed
1347
1348You need to configure idesk before you can use it. A detailed explanation can
1349be found in the README file which resides in:
1350
1351/usr/local/share/doc/idesk
1352
1353Unless you have chosen not to install it ;)
1354
1355###############################################################################
1356ibus-anthy installation finished. To use ibus-anthy, please do the following:
1357
1358If you are using bash or zsh, please add following lines to your $HOME/.bashrc or
1359$HOME/.zshrc:
1360
1361export XIM=ibus
1362export GTK_IM_MODULE=ibus
1363export QT_IM_MODULE=xim
1364export XMODIFIERS=@im=ibus
1365export XIM_PROGRAM="ibus-daemon"
1366export XIM_ARGS="-r --daemonize --xim"
1367
1368If you are using tcsh, please add following lines to your $HOME/.cshrc:
1369
1370setenv XIM ibus
1371setenv GTK_IM_MODULE ibus
1372setenv QT_IM_MODULE xim
1373setenv XMODIFIERS @im=ibus
1374setenv XIM_PROGRAM ibus-daemon
1375setenv XIM_ARGS "-r --daemonize --xim"
1376
1377If you are using KDE4, you may create a shell script in $HOME/.kde4/env,
1378and add following lines:
1379
1380#!/bin/sh
1381export XIM=ibus
1382export GTK_IM_MODULE=ibus
1383export QT_IM_MODULE=xim
1384export XMODIFIERS=@im=ibus
1385export XIM_PROGRAM="ibus-daemon"
1386export XIM_ARGS="-r --daemonize --xim"
1387
1388If ibus cannot start or the panel does not appear, please ensure
1389that you are using up-to-date python.
1390There's a bug in python 2.5, which may prevent the panel from appearing.
1391===============================================================================
1392
1393In order to use the File System read/write monitor, you must chmod
1394/dev/devstat so that all users can open it read-only.  For example:
1395
1396# chmod 0444 /dev/devstat
1397
1398In order for this to persist across reboots, add the following to
1399/etc/devfs.conf:
1400
1401perm    devstat 0444
1402
1403===============================================================================
1404This software is based in part on the work of the FreeType Team.
1405See <URL:http://www.freetype.org/>.
1406
1407Installation of the Linux base system is finished. The Linux kernel
1408mode, which must be enabled for Linux binaries to run, is now
1409enabled. Linux mode can be enabled permanently with the linux_enable
1410variable of rc.conf(5).
1411
1412If you want to use shared memory in Linux applications, you need to set up
1413a link from /dev/shm to a suitable place, e.g. by adding the following line
1414to /etc/devfs.conf (takes effect on each boot):
1415        link /tmp shm
1416
1417To make use of NIS you have to adjust yp.conf and nsswitch.conf in
1418/compat/linux/etc/ accordingly. For example:
1419
1420Set your yp-server and yp-domainname in yp.conf:
1421        domainname      my.yp.domainname
1422        ypserver        my.yp.server
1423
1424Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
1425        passwd: files nis
1426        shadow: files nis
1427        group:  files nis
1428        hosts:  files dns nis
1429
1430WARNING: doing work which needs to chroot into the linux base may not work.
1431In such cases (e.g. cross-development) you are better suited with a linux_dist
1432port.
1433
1434===================================================================
1435MPlayer's comprehensive documentation covers many topics like
1436output devices, video encoding, repairing broken files etc.
1437It is auto-generated daily and can be found on the project
1438homepage in the documentation section:
1439
1440http://www.mplayerhq.hu/design7/documentation.html
1441===================================================================
1442MPlayer's system-wide configuration dir is
1443
1444/usr/local/etc/mplayer
1445
1446If you want to install configuration files into this location
1447in order to change mplayer's default settings for all users on
1448your system, you find some examples in
1449
1450/usr/local/share/mplayer/examples/etc
1451===================================================================
1452************************************************************
1453Please verify /usr/local/etc/mtools.conf for your machine.
1454************************************************************
1455###
1456If you compiled WITH_PAM support, you need to edit /etc/pam.conf to add
1457support for netatalk.  To do so, add the following three lines to this
1458file:
1459
1460netatalk        auth    required        pam_unix.so     try_first_pass
1461netatalk        account required        pam_unix.so     try_first_pass
1462netatalk        session required        pam_permit.so
1463###
1464================================================================
1465
1466The nspluginwrapper is installed on a per user basis. All of
1467the commands can be run as an unprivileged user.
1468
1469================================================================
1470
1471To install all the plugins from their default locations:
1472
1473nspluginwrapper -v -a -i
1474
1475================================================================
1476
1477To install a specific plugin:
1478
1479nspluginwrapper -i path/to/plugin.so
1480
1481================================================================
1482
1483To remove a specific plugin:
1484
1485nspluginwrapper -r path/to/plugin.so
1486
1487================================================================
1488
1489To view all currently installed plugins:
1490
1491nspluginwrapper -l
1492
1493================================================================
1494=====================================================================
1495The nss_ldap module expects to find its configuration files at the
1496following paths:
1497
1498LDAP configuration:     /usr/local/etc/nss_ldap.conf
1499LDAP secret (optional): /usr/local/etc/nss_ldap.secret
1500
1501
1502WARNING: For users of previous versions of this port:
1503WARNING:
1504WARNING: Previous versions of this port expected configuration files
1505WARNING: to be located at /etc/ldap.conf and /etc/ldap.secret.  You
1506WARNING: may need to move these configuration files to their new
1507WARNING: location specified above.
1508=====================================================================
1509After installation, you need to edit the ossec.conf file to reflect
1510the correct settings for your environment.  All the files related
1511to ossec-hids have been installed in /usr/local/ossec-hids and
1512its subdirectories.
1513
1514For information on proper configuration, see http://www.ossec.net/.
1515
1516To enable the startup script, add ossechids_enable="YES" to
1517/etc/rc.conf.  To enable database output, execute:
1518
1519/usr/local/ossec-hids/bin/ossec-control enable database
1520
1521Then check this documentation:
1522
1523http://www.ossec.net/doc/manual/output/database-output.html
1524
1525When you deinstall this port after starting the daemons once, many
1526directories that are created by the daemons will remain.  To fully
1527remove the port you need to delete those directories manually.  To
1528further enhance the security on your system, you may also enable
1529some checks in PAM for a fast reaction against intrusions.
1530================================================================================
1531Copy /usr/local/etc/ldap.conf.dist to /usr/local/etc/ldap.conf, then edit
1532/usr/local/etc/ldap.conf in order to use this module.  Add a line similar to
1533the following to /etc/pam.conf on 4.X, or create an /etc/pam.d/ldap on 5.X
1534and higher with a line similar to the following:
1535
1536login   auth    sufficient      /usr/local/lib/pam_ldap.so
1537================================================================================
1538
1539You may want to add something like this to your /etc/pam.d/login
1540or /etc/pam.d/sshd ( when you've configured ssh with PAM )
1541file to use this module:
1542
1543session         required       /usr/local/lib/pam_mkhomedir.so
1544*******************************************************************************
1545
1546        To enable QT's database support, install the database plugin ports.
1547        The following plugin ports are available:
1548
1549                IBase/Firebird  - databases/qt4-ibase-plugin
1550                MySQL           - databases/qt4-mysql-plugin
1551                ODBC            - databases/qt4-odbc-plugin
1552                PostgreSQL      - databases/qt4-pgsql-plugin
1553                SQLite          - databases/qt4-sqlite-plugin                           
1554
1555*******************************************************************************
1556======================================================================
1557
1558You'll have to install sysutils/zeitgeist to enable event logging.
1559
1560======================================================================
1561======================================================================
1562
1563Please, consider installing backends for Phonon:
1564- multimedia/phonon-gstreamer   GStreamer backend
1565- multimedia/phonon-vlc         VLC backend
1566
1567======================================================================
1568======================================================================
1569
1570You'll need to install some GStreamer plugins to make Phonon able to
1571play something via this backend: multimedia/gstreamer-plugins-all will
1572let you choose among all of them.
1573
1574======================================================================
1575------------------------------------------------------------------------------
1576 Your SDL library has been built with libvgl support, which means that you
1577 can run almost any SDL application straight on your console (VESA 2.0
1578 compatible videocard is required).
1579
1580 To do this you have to load the vesa kernel module or enable it in your
1581 kernel, and set environment variable "SDL_VIDEODRIVER=vgl".
1582------------------------------------------------------------------------------
1583
1584- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1585
1586Please do not edit the fail2ban.conf and jail.conf files as they
1587will be overwritten upon each upgrade of the port.
1588
1589Instead, create new files named fail2ban.local and jail.local
1590
1591For more information, see the official manual:
1592
1593http://www.fail2ban.org/wiki/index.php/MANUAL_0_8#Configuration
1594
1595- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1596====
1597Note that some of the standard libraries are provided as separate
1598ports since they require extra dependencies:
1599
1600        converters/ruby-iconv   iconv module
1601
1602        databases/ruby-gdbm:    GDBM module
1603
1604        x11-toolkits/ruby-tk:   Tcl/Tk modules
1605        japanese/ruby-tk:       Tcl/Tk modules for Japanized Tcl/Tk
1606
1607        lang/ruby-mode.el:      Emacs lisp modules
1608
1609Install them as occasion demands.
1610====
1611==================================================================
1612
1613saned will log to the 'daemon' facility; this is a hard-coded
1614default. Also, saned has no support for SSL/TLS or cryptographic
1615authentication; you may wish to deploy security/stunnel to wrap
1616it if you have concerns about security.
1617
1618If you are using a USB scanner, you should create
1619/usr/local/etc/devd/saned.conf to allow saned access permissions.
1620Currently, devfs.rules(5) has no support for USB specific filters
1621such as vendor, product and serial number.
1622
1623Here is an example saned.conf for an Epson CX3650
1624multi-function scanner/printer device (assuming you are sharing
1625the printer function with cups):
1626
1627notify 100 {
1628        match "system" "USB";
1629        match "subsystem" "INTERFACE";
1630        match "type" "ATTACH";
1631        match "cdev" "ugen[0-9].[0-9]";
1632        match "vendor" "0x04b8";
1633        match "product" "0x080e";
1634        action "chown -L cups:saned /dev/$cdev && chmod -L 660 /dev/$cdev";
1635};
1636
1637To determine which port your scanner is connected to, inspect the
1638output of 'usbconfig list' before and after connecting your scanner,
1639and note the numbers which appear after 'ugen' in the first column.
1640Then, use 'usbconfig -d X.Y dump_device_desc' to learn the idVendor
1641and idProduct fields, and plug them into the above example entry.
1642
1643Finally, restart devd with the command:
1644 # /etc/rc.d/devd restart
1645
1646Please take /usr/local/etc/sane.d/dll.conf
1647as an example only; you may wish to enable only the 'net' backend
1648on client machines; be sure to point it at your scan server.
1649
1650If you are setting up a scan server, you may also wish to edit
1651/usr/local/etc/sane.d/saned.conf
1652to only permit specific machines.
1653
1654==================================================================
1655  +=======================================================================+
1656  |                  !!!      IMPORTANT NOTICE      !!!                   |
1657  +=======================================================================+
1658  |      If you are upgrading your current version, you MUST delete       |
1659  |     your printer in the CUPS interface and install it again. This     |
1660  |   operation MUST be done since CUPS make a copy of the PPD file and   |
1661  |                this file is modified between versions.                |
1662  +=======================================================================+
1663
1664Installation of the color profile for color printers:
1665-----------------------------------------------------
1666
1667        Color printers needs color profile files to get better results. These
1668files are provided by your printer manufacturer and you have to install them
1669manually. To do that, download the linux official drivers and locate the "cms"
1670directory. Install them with the command:
1671
1672                # make installcms CMSDIR=/path/to/cms/directory \
1673                        MANUFACTURER=samsung or xerox or dell
1674
1675        Samsung color profile files are available at:
1676                (Then use MANUFACTURER=samsung)
1677
1678                http://splix.ap2c.org/samsung_cms.tar.bz2
1679==============================================================================
1680
1681To use uhidd daemon for USB HID devices, depends on which sub class
1682driver you want to attach, to avoid confilicts between the daemon and
1683the kernel drivers, you should either use the command line option '-u'
1684to instruct the daemon to detach active kernel drivers attached to
1685a device, or you should remove some of those entries 'device ums',
1686'device ukbd', or 'device uhid' from your kernel config file and
1687recompile the kernel.
1688
1689Note that if the USB kernel drivers are compiled as kernel modules,
1690you should also remove the relevant devd(8) rules in /etc/devd/usb.conf
1691config file, so those modules will not be loaded automatically by devd(8)
1692when devices are attached.
1693
1694If you want to run uhidd deamon at the startup, add the following lines to
1695/etc/rc.conf:
1696
1697        uhidd_flags="-kmohsu"
1698        uhidd_enable="YES"
1699
1700Note that you need to modify the uhidd_flags (command line options)
1701according to which sub class drivers you want to use.
1702
1703To manually start/stop uhidd daemon on certain device, run:
1704
1705        /usr/local/etc/rc.d/uhidd [start|stop] /dev/ugen.X.Y
1706
1707See http://wiki.FreeBSD.org/uhidd for more details about how to install and
1708setup the daemon.
1709
1710==============================================================================
1711SECURITY NOTE: The VIM software has had several remote vulnerabilities
1712discovered within VIM's modeline support.  It allowed remote attackers to
1713execute arbitrary code as the user running VIM.  All known problems
1714have been fixed, but the FreeBSD Security Team advises that VIM users
1715use 'set nomodeline' in ~/.vimrc to avoid the possibility of trojaned
1716text files.
1717*********************************************************************
17181) webcamd requires the cuse4bsd kernel module, please load this
1719by doing
1720
1721       # kldload cuse4bsd
1722
1723or adding
1724
1725       cuse4bsd_load="YES"
1726
1727to your /boot/loader.conf.
1728
17292) Please restart devd as the configuration changed
1730
1731        # service devd restart
1732
1733*********************************************************************
1734IMPORTANT - READ CAREFULLY: You may not use these fonts if you do not agree to
1735the terms of the Microsoft End-User License Agreement ("EULA").  You will find
1736the EULA at /usr/local/share/doc/webfonts/LICENSE.  If you read and agree
1737to the EULA, you can start using the fonts by following these instructions:
1738
1739Make sure that the freetype module is loaded.  If it is not, add the following
1740line to the "Modules" section of xorg.conf or XF86Config:
1741
1742        Load "freetype"
1743
1744Add the following line to the "Files" section of xorg.conf or XF86Config:
1745
1746        FontPath "/usr/local/lib/X11/fonts/webfonts/"
1747================================================================================
1748You installed xterm with wide chars support. This introduces some limitations
1749comparing to the plain single chars version: this version of xterm will use
1750UTF-8 charset for selection buffers, breaking 8-bit copy/paste support unless
1751you are using UTF-8 or ISO8859-1 locale. If you want 8-bit charset selections to
1752work as before, use "eightBitSelectTypes" XTerm resource setting.
1753
1754For further information refer to the SELECT/PASTE section of xterm(1) manual
1755page.
1756================================================================================
1757Running chroot command: pkg info -e pcbsd-meta-lxde-21649.txz
1758Installing package: pcbsd-meta-lxde-21649.txz
1759Running: pkg -c /mnt add /usr/.pkgtmp/All/pcbsd-meta-lxde-21649.txz
1760Installing pcbsd-meta-lxde-21649...Installing desktop-file-utils-0.18... done
1761Installing gpicview-0.2.1_4... done
1762Installing leafpad-0.8.18.1_1... done
1763Installing libfm-1.1.0...Installing menu-cache-0.3.3... done
1764 done
1765Installing lxappearance-0.5.2_1... done
1766Installing lxde-common-0.5.5_3... done
1767Installing lxde-icon-theme-0.0.1_1... done
1768Installing lxde-meta-1.0_4...Installing lxinput-0.3.1_1... done
1769Installing lxmenu-data-0.1.2... done
1770Installing lxpanel-0.5.12... done
1771Installing lxsession-0.4.6.1_1... done
1772Installing lxtask-0.1.4_1... done
1773Installing lxterminal-0.1.11_1...Installing vte-0.26.2_4... done
1774 done
1775Installing obconf-2.0.3_8...Installing openbox-3.5.0_3... done
1776 done
1777Installing pcmanfm-1.1.0... done
1778 done
1779Installing obkey-1.0... done
1780Installing xarchiver-0.5.2_6...Warning in file "/usr/local/share/applications/pcmanfm.desktop": usage of MIME type "x-directory/normal" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent)
1781 done
1782 done
1783******************************************************
1784This ports works only if linprocfs is mounted. Ensure
1785that linprocfs is mounted before running.
1786*****************************************************
1787Package installation complete!
1788Running: cd /dev
1789Running: umount /mnt/usr/.pkgtmp
1790Running: rmdir /mnt/usr/.pkgtmp
1791Running chroot command: /usr/bin/cap_mkdb /etc/login.conf
1792Setting fxp0 to DHCP on the system.
1793Setting fxp0 to accepting RAs on the system.
1794Setting hostname: pcbsd-5264
1795Running external command: /root/save-config.sh
1796Running external command: mount -t devfs devfs ${FSMNT}/dev
1797Running chroot command: sh /usr/local/share/pcbsd/scripts/sys-init.sh desktop 日本語 - (ja)
1798Running chroot command: touch /var/.runxsetup
1799Running chroot command: touch /var/.pcbsd-firstboot
1800Running chroot command: touch /var/.pcbsd-firstgui
1801Running external command: umount -f ${FSMNT}/dev
1802Running chroot command: newaliases