Ticket #748: pc-sysinstall.log

File pc-sysinstall.log, 91.3 KB (added by lordthrasher, 13 months ago)

System Installation Log

Line 
1kern.geom.debugflags: 0 -> 16
2Running gpart modify on /dev/ada0
3Running: gpart modify -t freebsd -i 2 /dev/ada0
4ada0s2 modified
5Cleaning up /dev/ada0s2
6Running: dd if=/dev/zero of=/dev/ada0s2 count=1024
71024+0 records in
81024+0 records out
9524288 bytes transferred in 0.155883 secs (3363341 bytes/sec)
10Running: gpart create -s BSD /dev/ada0s2
11ada0s2 created
12Running: gpart add -s 19957M -a 512b -t freebsd-zfs -i 1 /dev/ada0s2
13ada0s2a added
14Running: gpart add -s 512M  -t freebsd-swap -i 2 /dev/ada0s2
15ada0s2b added
16Running: gpart bootcode -b /boot/boot /dev/ada0s2
17bootcode written to ada0s2
18NEWFS: /dev/ada0s2a - ZFS
19Setting up ZFS boot loader support
20Running: dd if=/boot/zfsboot of=/dev/ada0s2 count=1
211+0 records in
221+0 records out
23512 bytes transferred in 0.077670 secs (6592 bytes/sec)
24Running: dd if=/boot/zfsboot of=/dev/ada0s2a skip=1 seek=1024
25128+0 records in
26128+0 records out
2765536 bytes transferred in 0.024478 secs (2677347 bytes/sec)
28Creating zpool tank1 on /dev/ada0s2a
29Running: zpool create -m none -f tank1 /dev/ada0s2a
30Running: sync
31Running: glabel label swap0 /dev/ada0s2b
32Running: sync
33zfs create  -p tank1/ROOT
34Running: zfs create  -p tank1/ROOT
35zfs create  -p tank1/ROOT/default
36Running: zfs create  -p tank1/ROOT/default
37Running: zfs set mountpoint=/mnt tank1/ROOT/default
38Stamping tank1/ROOT/default as bootfs
39Running: zpool set bootfs=tank1/ROOT/default tank1
40zfs create  -p tank1/tmp
41Running: zfs create  -p tank1/tmp
42Running: zfs set mountpoint=/mnt/tmp tank1/tmp
43Running: zfs set compress=lzjb tank1/tmp
44zfs create  -p tank1/usr
45Running: zfs create  -p tank1/usr
46Running: zfs set mountpoint=/mnt/usr tank1/usr
47Running: zfs set canmount=off tank1/usr
48zfs create  -p tank1/usr/home
49Running: zfs create  -p tank1/usr/home
50Running: zfs set mountpoint=/mnt/usr/home tank1/usr/home
51zfs create  -p tank1/usr/jails
52Running: zfs create  -p tank1/usr/jails
53Running: zfs set mountpoint=/mnt/usr/jails tank1/usr/jails
54zfs create  -p tank1/usr/obj
55Running: zfs create  -p tank1/usr/obj
56Running: zfs set mountpoint=/mnt/usr/obj tank1/usr/obj
57Running: zfs set compress=lzjb tank1/usr/obj
58zfs create  -p tank1/usr/pbi
59Running: zfs create  -p tank1/usr/pbi
60Running: zfs set mountpoint=/mnt/usr/pbi tank1/usr/pbi
61zfs create  -p tank1/usr/ports
62Running: zfs create  -p tank1/usr/ports
63Running: zfs set mountpoint=/mnt/usr/ports tank1/usr/ports
64Running: zfs set compress=gzip tank1/usr/ports
65zfs create  -p tank1/usr/ports/distfiles
66Running: zfs create  -p tank1/usr/ports/distfiles
67Running: zfs set mountpoint=/mnt/usr/ports/distfiles tank1/usr/ports/distfiles
68Running: zfs set compress=off tank1/usr/ports/distfiles
69zfs create  -p tank1/usr/src
70Running: zfs create  -p tank1/usr/src
71Running: zfs set mountpoint=/mnt/usr/src tank1/usr/src
72Running: zfs set compress=gzip tank1/usr/src
73zfs create  -p tank1/var
74Running: zfs create  -p tank1/var
75Running: zfs set mountpoint=/mnt/var tank1/var
76Running: zfs set canmount=off tank1/var
77zfs create  -p tank1/var/audit
78Running: zfs create  -p tank1/var/audit
79Running: zfs set mountpoint=/mnt/var/audit tank1/var/audit
80Running: zfs set compress=lzjb tank1/var/audit
81zfs create  -p tank1/var/log
82Running: zfs create  -p tank1/var/log
83Running: zfs set mountpoint=/mnt/var/log tank1/var/log
84Running: zfs set compress=gzip tank1/var/log
85zfs create  -p tank1/var/tmp
86Running: zfs create  -p tank1/var/tmp
87Running: zfs set mountpoint=/mnt/var/tmp tank1/var/tmp
88Running: zfs set compress=lzjb tank1/var/tmp
89swapon /dev/ada0s2b
90Running: swapon /dev/ada0s2b
91pc-sysinstall: Starting Extraction (base)
92pc-sysinstall: Starting Extraction (doc)
93pc-sysinstall: Starting Extraction (games)
94pc-sysinstall: Starting Extraction (kernel)
95pc-sysinstall: Starting Extraction (lib32)
96pc-sysinstall: Extraction Finished
97Running: mkdir -p /mnt/usr/.pkgtmp
98Running: mount_nullfs /dist/packages /mnt/usr/.pkgtmp
99Running: cd /mnt/usr/.pkgtmp/All
100Packages to install: 9
101Running chroot command: which pkg-static
102Bootstraping pkgng..
103Running: pkg -c /mnt add /usr/.pkgtmp/Latest/pkg.txz
104Installing pkg-1.1.4_1... done
105If you are upgrading from the old package format, first run:
106
107  # pkg2ng
108Running chroot command: pkg info -e pcbsd-base-1374071964.txz
109Installing package: pcbsd-base-1374071964.txz
110Installing pcbsd-base-1374071964...Installing zenity-2.32.1_2...Installing xproto-7.0.24... done
111Installing xineramaproto-1.2.1... done
112Installing xextproto-7.2.1... done
113Installing xcb-util-renderutil-0.3.8...Installing xcb-util-0.3.9_1,1...Installing libxcb-1.9.1...Installing libXdmcp-1.1.1... done
114Installing libXau-1.0.8... done
115Installing libxml2-2.8.0_2...Installing pkgconf-0.9.2_1... done
116Installing libiconv-1.14_1... done
117 done
118Installing libpthread-stubs-0.3_3... done
119 done
120 done
121 done
122Installing renderproto-0.11.1... done
123Installing randrproto-1.4.0... done
124Installing pixman-0.30.0... done
125Installing libXrender-0.9.8...Installing libX11-1.6.0,1...Installing kbproto-1.0.6... done
126 done
127 done
128Installing libXrandr-1.4.1...Installing libXext-1.3.2,1... done
129 done
130Installing libXinerama-1.1.3,1... done
131Installing libXi-1.7.2,1...Installing libXfixes-5.0.1...Installing fixesproto-5.0... done
132 done
133Installing inputproto-2.3... done
134 done
135Installing libXdamage-1.1.4...Installing damageproto-1.2.1... done
136 done
137Installing libXcursor-1.1.14... done
138Installing libXcomposite-0.4.4,1...Installing compositeproto-0.4.2... done
139 done
140Installing libSM-1.2.1,1...Installing libICE-1.0.8,1... done
141 done
142Installing pango-1.34.1_1...Installing xorg-fonts-truetype-7.7_1...Installing mkfontscale-1.1.1...Installing libfontenc-1.1.2... done
143Installing freetype2-2.4.12_1... done
144 done
145Installing mkfontdir-1.0.7... done
146Installing fontconfig-2.10.93,1...Installing expat-2.1.0... done
147Running fc-cache to build fontconfig cache...
148/usr/local/share/fonts: skipping, no such directory
149/usr/local/lib/X11/fonts: caching, new cache contents: 0 fonts, 1 dirs
150/usr/local/lib/X11/fonts/local: caching, new cache contents: 0 fonts, 0 dirs
151/root/.local/share/fonts: skipping, no such directory
152/root/.fonts: skipping, no such directory
153/var/db/fontconfig: cleaning cache directory
154/root/.cache/fontconfig: not cleaning non-existent cache directory
155/root/.fontconfig: not cleaning non-existent cache directory
156fc-cache: succeeded
157 done
158Installing font-util-1.3.0... done
159Installing font-misc-meltho-1.0.3... done
160Installing font-misc-ethiopic-1.0.3... done
161Installing font-bh-ttf-1.0.3... done
162Installing encodings-1.0.4,1... done
163Installing dejavu-2.33... done
164 done
165Installing libXft-2.3.1... done
166Installing harfbuzz-0.9.19...Installing python27-2.7.5_1...Installing gettext-0.18.3... done
167 done
168Installing perl-5.14.4...Removing stale symlinks from /usr/bin...
169    Skipping /usr/bin/perl
170    Skipping /usr/bin/perl5
171Done.
172Creating various symlinks in /usr/bin...
173    Symlinking /usr/local/bin/perl5.14.4 to /usr/bin/perl
174    Symlinking /usr/local/bin/perl5.14.4 to /usr/bin/perl5
175Done.
176Cleaning up /etc/make.conf... Done.
177Spamming /etc/make.conf... Done.
178 done
179Installing png-1.5.17... done
180Installing graphite2-1.2.3... done
181Installing cairo-1.10.2_5,2...Installing pcre-8.33... done
182Installing libffi-3.0.13... done
183Installing glib-2.36.3...No schema files found: doing nothing.
184 done
185 done
186Installing icu-50.1.2... done
187 done
188Installing gnomehier-3.0... done
189 done
190Installing libXt-1.1.4,1... done
191Installing gtk-2.24.19_1...Installing cups-client-1.5.4_1...Installing shared-mime-info-1.1... done
192Installing hicolor-icon-theme-0.12... done
193Installing tiff-4.0.3...Installing jpeg-8_4... done
194Installing jbigkit-1.6... done
195 done
196Installing jasper-1.900.1_12... done
197Installing gtk-update-icon-cache-2.24.19...Installing gdk-pixbuf2-2.28.2... done
198Installing atk-2.8.0... done
199 done
200 done
201 done
202Installing xmlcharent-0.3_2...Installing xmlcatmgr-2.2... + Creating /usr/local/share/sgml/catalog
203 + Registering CATALOG catalog.ports (SGML)
204 + Creating /usr/local/share/sgml/catalog.ports
205 + Creating /usr/local/share/xml/catalog
206 + Registering nextCatalog catalog.ports (XML)
207 + Creating /usr/local/share/xml/catalog.ports
208 done
209 done
210Installing rarian-0.8.1...Installing libxslt-1.1.28_1...Installing libgpg-error-1.12... done
211Installing libgcrypt-1.5.2... done
212 done
213Installing iso8879-1986_3... done
214Installing docbook-xsl-1.76.1_1...Installing docbook-xml-4.5... done
215Installing docbook-xml-4.4_1... done
216Installing docbook-xml-4.3... done
217Installing docbook-xml-4.2_1... done
218Installing docbook-sk-4.1.2_4... done
219Installing docbook-5.0_1... done
220Installing docbook-4.5_2... done
221Installing docbook-4.4_2... done
222Installing docbook-4.3... done
223Installing docbook-4.2... done
224Installing docbook-4.1_4... done
225Installing docbook-1.4_1... done
226 done
227Installing bash-4.2.45... done
228Installing getopt-1.1.5... done
229 done
230Installing py27-libxml2-2.8.0... done
231Installing gnome-doc-utils-0.20.10... done
232Installing libnotify-0.7.5... done
233 done
234Installing xwud-1.0.4... done
235Installing xwininfo-1.1.3... done
236Installing xwd-1.0.5...Installing libXmu-1.1.1,1... done
237 done
238Installing xvkbd-3.5...Installing recordproto-1.14.2... done
239Installing printproto-1.0.5... done
240Installing libXtst-1.2.2... done
241Installing libXpm-3.5.10... done
242Installing libXp-1.0.2,1... done
243Installing libXaw-1.0.11,2... done
244 done
245Installing xvinfo-1.1.2...Installing videoproto-2.3.2... done
246Installing libXv-1.0.9,1... done
247 done
248Installing xtrans-1.2.7... done
249Installing xterm-296... done
250Installing xsetroot-1.1.1...Installing xbitmaps-1.1.1... done
251 done
252Installing xsetmode-1.0.0... done
253Installing xset-1.2.2_1...Installing libXfontcache-1.0.5...Installing fontcacheproto-0.1.3... done
254 done
255 done
256Installing xscreensaver-gnome-5.12_1...Installing xf86vidmodeproto-2.3.1... done
257Installing libXxf86vm-1.1.3... done
258Installing dri2proto-2.8... done
259Installing polkit-0.105_1...Installing gnome_subr-1.0... done
260Installing gobject-introspection-1.36.0_1... done
261Installing dbus-1.6.12...===> Creating users and/or groups.
262Creating group 'messagebus' with gid '556'.
263Creating user 'messagebus' with uid '556'.
264 done
265 done
266Installing libtasn1-2.14... done
267Installing libgnome-keyring-2.32.0_5...Installing libIDL-0.8.14_1... done
268Installing gconf2-2.32.0_3...Installing dconf-0.14.1... done
269Installing dbus-glib-0.100.2... done
270Installing ORBit2-2.14.19... done
271 done
272 done
273Installing gnome-keyring-2.32.1_3...Installing ca_root_nss-3.15.1... done
274 done
275Installing pciids-20130718... done
276Installing libdrm-2.4.46...Installing libpciaccess-0.13.1_3... done
277 done
278Installing libGLU-9.0.0...Installing libGL-8.0.5_4... done
279 done
280Installing gle-3.1.0_3...Installing freeglut-2.8.1... done
281 done
282Installing libglade2-2.6.4_5... done
283 done
284Installing xrefresh-1.0.5... done
285Installing xrdb-1.0.9... done
286Installing xrandr-1.4.1... done
287Installing xprop-1.2.1... done
288Installing xpr-1.0.4... done
289Installing xorg-libraries-7.7...Installing xf86miscproto-0.9.3... done
290Installing xf86dgaproto-2.1... done
291Installing trapproto-3.4.3... done
292Installing scrnsaverproto-1.2.2... done
293Installing libxkbui-1.0.2_1...Installing libxkbfile-1.0.8... done
294 done
295Installing liboldX-1.0.1... done
296Installing libdmx-1.1.3...Installing dmxproto-2.3.1... done
297 done
298Installing libXxf86misc-1.0.3... done
299Installing libXxf86dga-1.1.4... done
300Installing libXvMC-1.0.8... done
301Installing libXres-1.0.7... done
302Installing libXevie-1.0.3... done
303Installing libXTrap-1.0.1... done
304Installing libXScrnSaver-1.2.2... done
305Installing libXfont-1.4.5,1...Installing fontsproto-2.1.2... done
306 done
307Installing libFS-1.0.5... done
308 done
309Installing xorg-docs-1.7,1... done
310Installing xorg-apps-7.7...Installing xmodmap-1.0.7... done
311Installing xmessage-1.0.4... done
312Installing xlsclients-1.1.2... done
313Installing xlsatoms-1.1.1... done
314Installing xkill-1.0.3... done
315Installing xkbutils-1.0.4... done
316Installing xkbevd-1.1.3... done
317Installing xkbcomp-1.2.4... done
318Installing xinput-1.6.0... done
319Installing xinit-1.3.2,1... done
320Installing xhost-1.0.6... done
321Installing xgc-1.0.4... done
322Installing xgamma-1.0.5... done
323Installing xf86dga-1.0.3... done
324Installing xev-1.2.1... done
325Installing xdriinfo-1.0.4... done
326Installing xdpyinfo-1.3.1... done
327Installing xcursorgen-1.0.5... done
328Installing xconsole-1.0.6... done
329Installing xcmsdb-1.0.4... done
330Installing xcalc-1.0.5...Installing font-misc-misc-1.1.2... done
331Installing font-alias-1.0.3... done
332Installing font-adobe-100dpi-1.0.3... done
333 done
334Installing xbacklight-1.2.0... done
335Installing xauth-1.0.7... done
336Installing x11perf-1.5.4... done
337Installing smproxy-1.0.5... done
338Installing setxkbmap-1.3.0... done
339Installing sessreg-1.0.8... done
340Installing luit-1.1.1... done
341Installing iceauth-1.0.6... done
342Installing bitmap-1.0.7... done
343Installing appres-1.0.4... done
344Installing twm-1.0.7... done
345Installing xclock-1.0.6_1... done
346 done
347Installing xorg-7.7...Installing xkeyboard-config-2.9... done
348Installing xcursor-themes-1.0.4_1... done
349Installing xorg-server-1.12.4_1,1...Installing policykit-0.9_6...===> Creating users and/or groups.
350Creating group 'polkit' with gid '562'.
351Creating user 'polkit' with uid '562'.
352 done
353Installing hal-0.5.14_20...Installing dmidecode-2.11... done
354Installing consolekit-0.4.3... done
355Installing libvolume_id-0.81.1... done
356===> Creating users and/or groups.
357Creating group 'haldaemon' with gid '560'.
358Creating user 'haldaemon' with uid '560'.
359 done
360Installing dri-8.0.5_3,2... done
361 done
362Installing xorg-fonts-type1-7.7...Installing font-xfree86-type1-1.0.4... done
363Installing font-ibm-type1-1.0.3... done
364Installing font-bitstream-type1-1.0.3... done
365Installing font-bh-type1-1.0.3... done
366Installing font-adobe-utopia-type1-1.0.4... done
367 done
368Installing xorg-fonts-miscbitmaps-7.7...Installing font-sun-misc-1.0.3... done
369Installing font-sony-misc-1.0.3... done
370Installing font-schumacher-misc-1.1.2... done
371Installing font-mutt-misc-1.0.3... done
372Installing font-micro-misc-1.0.3... done
373Installing font-jis-misc-1.0.3... done
374Installing font-isas-misc-1.0.3... done
375Installing font-dec-misc-1.0.3... done
376Installing font-daewoo-misc-1.0.3... done
377Installing font-cursor-misc-1.0.3... done
378Installing font-arabic-misc-1.0.3... done
379 done
380Installing xorg-fonts-cyrillic-7.7...Installing font-winitzki-cyrillic-1.0.3... done
381Installing font-screen-cyrillic-1.0.4... done
382Installing font-misc-cyrillic-1.0.3... done
383Installing font-cronyx-cyrillic-1.0.3... done
384 done
385Installing xorg-fonts-75dpi-7.7...Installing font-bitstream-75dpi-1.0.3... done
386Installing font-bh-lucidatypewriter-75dpi-1.0.3... done
387Installing font-bh-75dpi-1.0.3... done
388Installing font-adobe-utopia-75dpi-1.0.4... done
389Installing font-adobe-75dpi-1.0.3... done
390 done
391Installing xorg-fonts-100dpi-7.7...Installing font-bitstream-100dpi-1.0.3... done
392Installing font-bh-lucidatypewriter-100dpi-1.0.3... done
393Installing font-bh-100dpi-1.0.3... done
394Installing font-adobe-utopia-100dpi-1.0.4... done
395 done
396Installing xorg-fonts-7.7... done
397Installing xorg-drivers-7.7...Installing xf86-video-vesa-2.3.2... done
398Installing xf86-video-radeonhd-1.3.0_5... done
399Installing xf86-video-r128-6.8.4_3... done
400Installing xf86-video-openchrome-0.3.3... done
401Installing xf86-video-nv-2.1.20_1... done
402Installing xf86-video-mach64-6.9.4... done
403Installing xf86-video-intel-2.21.9... done
404Installing xf86-video-ati-6.14.6... done
405Installing xf86-input-mouse-1.9.0... done
406Installing xf86-input-keyboard-1.7.0... done
407 done
408 done
409Installing xbrightness-0.3... done
410Installing startup-notification-0.12_1... done
411Installing qt4-opengl-4.8.4...Installing qt4-gui-4.8.4...Installing xdg-utils-1.0.2_8... done
412Installing qt4-corelib-4.8.4_4... done
413 done
414 done
415Installing qt4-inputmethods-4.8.4... done
416Installing qt4-graphicssystems-opengl-4.8.4... done
417Installing numlockx-1.2... done
418Installing linux-f10-xorg-libs-7.4_1...Installing linux-f10-fontconfig-2.6.0...Installing linux-f10-expat-2.0.1...Installing linux_base-f10-10_7...
419+++ Some programs may need linprocfs, please add it to /etc/fstab! +++
420
421Running linux ldconfig...
422 done
423 done
424 done
425 done
426Installing libxklavier-5.0_1,1...Installing iso-codes-3.43... done
427 done
428Installing libgnomekbd-2.32.0_1... done
429Installing libgnome-2.32.0_1...Installing samba36-libsmbclient-3.6.17...Installing tevent-0.9.18...Installing talloc-2.0.8... done
430 done
431Installing libexecinfo-1.1_3... done
432Installing tdb-1.2.12,1... done
433 done
434Installing avahi-app-0.6.31...Installing libdaemon-0.14... done
435Installing gdbm-1.10... done
436===> Creating users and/or groups.
437Creating group 'avahi' with gid '558'.
438Creating user 'avahi' with uid '558'.
439 done
440Installing gnome-mime-data-2.18.0_4... done
441Installing popt-1.16... done
442Installing libltdl-2.4.2... done
443Installing libbonobo-2.32.0... done
444Installing gnome-vfs-2.24.4_1...Installing gamin-0.1.10_6... done
445 done
446Installing libvorbis-1.3.3_1,3...Installing libogg-1.3.1,4... done
447 done
448Installing libcanberra-0.28_3... done
449Installing libaudiofile-0.2.7... done
450Installing esound-0.2.41_1... done
451 done
452Installing idesk-0.7.5_10...Installing imlib2-1.4.5_2,2...Installing giflib-nox11-4.2.1_2... done
453Installing libid3tag-0.15.1b... done
454 done
455 done
456Installing gtk-theme-switch-2.0.0.r2_5... done
457Installing gnome-session-2.32.1_2...Installing gnome-desktop-2.32.1_3...Installing py27-gtk-2.24.0_1...Installing py27-cairo-1.8.10_1... done
458Installing py27-gobject-2.28.6_3... done
459 done
460 done
461Installing upower-0.9.7_1... done
462Installing gnome-settings-daemon-2.32.1_4...Installing nss-3.15.1...Installing nspr-4.10... done
463Installing sqlite3-3.7.17_1... done
464 done
465Installing gstreamer-plugins-good-0.10.31,3...Installing gstreamer-plugins-0.10.36_3,3...Installing gstreamer-0.10.36... done
466Installing orc-0.4.17... done
467 done
468 done
469Installing speex-1.2.r1_4,1... done
470Installing pulseaudio-0.9.23_2...Installing libsndfile-1.0.25_3...Installing flac-1.3.0_1... done
471 done
472Installing libsamplerate-0.1.8_3... done
473===> Creating users and/or groups.
474Creating group 'pulse' with gid '563'.
475Creating group 'pulse-access' with gid '564'.
476Creating group 'pulse-rt' with gid '557'.
477Creating user 'pulse' with uid '563'.
478 done
479 done
480 done
481Installing gnome-panel-2.32.1_3...Installing gnome-menus-2.30.5... done
482Installing libwnck-2.30.6_1... done
483Installing libbonoboui-2.24.4_1...Installing libgnomecanvas-2.30.3_1...Installing libart_lgpl-2.3.21,1... done
484 done
485 done
486Installing gtk-engines2-2.20.2_1... done
487Installing cantarell-fonts-0.0.13.../usr/local/share/fonts/cantarell: caching, new cache contents: 2 fonts, 0 dirs
488/var/db/fontconfig: cleaning cache directory
489/root/.cache/fontconfig: not cleaning non-existent cache directory
490/root/.fontconfig: not cleaning non-existent cache directory
491/usr/local/bin/fc-cache: succeeded
492 done
493Installing libcroco-0.6.8... done
494Installing p11-kit-0.16.3... done
495Installing nettle-2.7.1...Installing gmp-5.1.2... done
496 done
497Installing gnutls-2.12.23_1... done
498Installing openldap-client-2.4.35... done
499Installing libproxy-0.4.6... done
500Installing libgweather-2.30.3_2...Installing glib-networking-2.36.2...Installing gsettings-desktop-schemas-3.6.1... done
501 done
502Installing gnome-icon-theme-2.31.0_3... done
503Installing libsoup-2.40.3_2... done
504 done
505Installing librsvg2-2.36.4...Installing libgsf-1.14.27... done
506 done
507Installing libsoup-gnome-2.40.3_3... done
508Installing libical-0.48... done
509Installing libgdata-0.6.6_1... done
510Installing evolution-data-server-2.32.1_4...Installing db41-4.1.25_4... done
511 done
512 done
513Installing gdm-2.30.7_2...Installing polkit-gnome-0.102... done
514===> Creating users and/or groups.
515Creating group 'gdm' with gid '92'.
516Creating user 'gdm' with uid '92'.
517 done
518Installing metacity-2.30.3_1... done
519Installing fluxbox-1.3.5... done
520Installing pangomm-2.28.4...Installing libxml++-2.34.2...Installing libsigc++-2.3.1... done
521Installing glibmm-2.36.2,1... done
522 done
523Installing cairomm-1.10.0_1... done
524 done
525Installing open-motif-2.3.4... done
526Installing linux-f10-pango-1.28.3...Installing linux-f10-png-1.2.37_2... done
527Installing linux-f10-cairo-1.8.0_2... done
528 done
529Installing linux-f10-gtk2-2.14.7_4...Installing linux-f10-tiff-3.8.2...Installing linux-f10-jpeg-6b... done
530 done
531Installing linux-f10-atk-1.24.0... done
532 done
533Installing gtkmm-2.24.2_1...Installing atkmm-2.22.6... done
534 done
535Installing gtk-3.8.2_1...Installing lcms2-2.5... done
536Installing colord-1.0.1...===> Creating users and/or groups.
537Creating group 'colord' with gid '970'.
538Creating user 'colord' with uid '970'.
539 done
540Installing at-spi2-core-2.8.0... done
541Installing at-spi2-atk-2.8.0... done
542 done
543Installing qt4-style-qtcurve-1.8.14...Installing qt4-xml-4.8.4... done
544Installing qt4-svg-4.8.4... done
545Installing qt4-imageformats-4.8.4...Installing libmng-1.0.10_2...Installing lcms-1.19_1,1... done
546 done
547 done
548Installing qt4-dbus-4.8.4... done
549 done
550Installing gtk2-qtcurve-theme-1.8.16... done
551Installing fluxbox-tenr-styles-pack-20071215_3... done
552Installing cursor-jimmac-theme-0.1_2... done
553Installing webfonts-0.30_6.../lib/X11/fonts/webfonts: skipping, no such directory
554/var/db/fontconfig: cleaning cache directory
555/root/.cache/fontconfig: not cleaning non-existent cache directory
556/root/.fontconfig: not cleaning non-existent cache directory
557/usr/local/bin/fc-cache: succeeded
558 done
559Installing fonts-indic-2.1.5_1.../lib/X11/fonts/fonts-indic: skipping, no such directory
560/var/db/fontconfig: cleaning cache directory
561/root/.cache/fontconfig: not cleaning non-existent cache directory
562/root/.fontconfig: not cleaning non-existent cache directory
563/usr/local/bin/fc-cache: succeeded
564 done
565Installing xf86-input-synaptics-1.7.1... done
566Installing serf-1.2.1_1...Installing apr-1.4.8.1.5.2...Installing db42-4.2.52_5... done
567 done
568 done
569Installing qt4-webkit-4.8.4_1...Installing qt4-xmlpatterns-4.8.4...Installing qt4-network-4.8.4... done
570 done
571Installing qt4-script-4.8.4... done
572Installing qt4-declarative-4.8.4...Installing qt4-sql-4.8.4... done
573 done
574 done
575Installing nspluginwrapper-1.4.4_1...Installing curl-7.31.0_1... done
576 done
577Installing linux-f10-flashplugin-11.2r202.297...Installing linux-f10-openssl-0.9.8g... done
578Installing linux-f10-nss-3.12.3.99.3_1...Installing linux-f10-nspr-4.7.6... done
579Installing linux-f10-sqlite3-3.5.9_1... done
580 done
581Installing linux-f10-libssh2-0.18... done
582Installing linux-f10-cyrus-sasl2-2.1.22_1... done
583Installing linux-f10-openldap-2.4.12_1... done
584Installing linux-f10-curl-7.19.6_1... done
585 done
586Installing aria2-1.17.1... done
587Installing vi-aspell-0.01.1.1_1,2...Installing aspell-0.60.6.1_2... done
588 done
589Installing uk-aspell-1.4.0.0_1,2... done
590Installing qt4-xmlpatterns-tool-4.8.4... done
591Installing qt4-clucene-4.8.4... done
592Installing py27-xml-0.8.4_2... done
593Installing libyaml-0.1.4_2... done
594Installing ibus-table-1.3.9.20110827_2...Installing ibus-1.4.1...Installing py27-xdg-0.19... done
595Installing py27-notify-0.1.1_9... done
596Installing py27-dbus-1.1.1... done
597 done
598Installing py27-sqlite3-2.7.5_3... done
599 done
600Installing ibus-qt-1.3.2... done
601Installing ibus-m17n-1.3.3_2...Installing libotf-0.9.13... done
602Installing libgd-2.1.0,1... done
603Installing m17n-lib-1.6.4_1...Installing m17n-db-1.6.4... done
604Installing fribidi-0.19.2_1... done
605 done
606 done
607Installing volman-0.7_1... done
608Installing uhidd-0.2.1_1...Installing cuse4bsd-kmod-0.1.30... done
609 done
610Installing swapexd-0.4... done
611Installing squashfs-tools-4.2...Installing lzo2-2.06... done
612 done
613Installing smartmontools-6.2... done
614Installing qzeitgeist-0.8.0...Installing qt4-qtestlib-4.8.4... done
615 done
616Installing pciutils-3.1.9... done
617Installing pcbsd-utils-qt4-1376557440...Installing pcbsd-utils-1376604408...Installing jailme-0.1... done
618Installing debootstrap-1.0.53...Installing wget-1.14_2...Installing libidn-1.27... done
619 done
620 done
621Installing sipcalc-1.1.5... done
622Installing subversion-1.8.1... done
623Added new repo: "Official PC-BSD Repository" to the database.
624 done
625Installing qt4-multimedia-4.8.4... done
626Installing phonon-gstreamer-4.6.3...Installing phonon-4.6.0_1...Installing kdehier4-1.1.1... done
627 done
628 done
629Installing qt4-qtconfig-4.8.4... done
630Installing qt4-l10n-4.8.4... done
631Installing qt4-doc-4.8.4... done
632Installing qt4-codecs-kr-4.8.4... done
633Installing qt4-codecs-jp-4.8.4... done
634Installing qt4-pixeltool-4.8.4... done
635Installing qt4-iconengines-4.8.4... done
636Installing qt4-uic3-4.8.4...Installing qt4-qt3support-4.8.4... done
637Installing qt4-porting-4.8.4... done
638 done
639Installing qt4-uic-4.8.4... done
640Installing qt4-scripttools-4.8.4... done
641Installing qt4-rcc-4.8.4... done
642Installing qt4-qvfb-4.8.4... done
643Installing qt4-qtsolutions-singleapplication-20110722_1... done
644Installing qt4-qmlviewer-4.8.4... done
645Installing qt4-qdbusviewer-4.8.4... done
646Installing qt4-moc-4.8.4... done
647Installing qt4-makeqpf-4.8.4... done
648Installing qt4-linguist-4.8.4...Installing qt4-help-4.8.4...Installing qt4-sqlite-plugin-4.8.4... done
649 done
650Installing qt4-assistant-4.8.4... done
651 done
652Installing qt4-help-tools-4.8.4... done
653Installing qt4-qmake-4.8.4... done
654Installing qt4-codecs-tw-4.8.4... done
655Installing qt4-codecs-cn-4.8.4... done
656Installing qt4-accessible-4.8.4... done
657 done
658Installing libsunacl-1.0... done
659Installing gsmartcontrol-0.8.7_1... done
660Installing grub2-2.00_1...Installing mpfr-3.1.2... done
661Installing mpc-0.9... done
662Installing gcc-4.6.3...Installing binutils-2.23.2... done
663 done
664 done
665Installing fusefs-ntfs-2012.1.15...Installing fusefs-libs-2.9.3... done
666Installing fusefs-kmod-0.3.9.p1.20080208_11... done
667Installing libublio-20070103... done
668 done
669Installing fusefs-ext4fuse-0.1.3,1... done
670Installing fusefs-exfat-1.0.1... done
671Installing dvd+rw-tools-7.1...Installing cdrtools-3.00_2... done
672 done
673Installing cdrdao-1.2.3_4...Installing libmad-0.15.1b_2... done
674Installing libao-1.1.0_1... done
675 done
676Installing beadm-devel-0.8.99.20130730... done
677Installing sudo-1.8.7_1... done
678Installing py27-fail2ban-0.8.9... done
679Installing pinentry-qt4-0.8.1_3...Installing libksba-1.3.0... done
680 done
681Installing pam_mkhomedir-0.2... done
682Installing pam_ldap-1.8.6_2... done
683Installing ossec-hids-local-2.7...===> Creating users and/or groups.
684Creating group 'ossec' with gid '966'.
685Creating user 'ossec' with uid '966'.
686Creating user 'ossecm' with uid '967'.
687Creating user 'ossecr' with uid '968'.
688 done
689Installing OpenSSH-askpass-1.2.4.1_2... done
690Installing linux-f10-libtasn1-1.5... done
691Installing linux-f10-libgpg-error-1.6... done
692Installing linux-f10-libgcrypt-1.4.4... done
693Installing linux-f10-gnutls-2.4.2_1... done
694Installing libssh2-1.4.3_1,2... done
695Installing libassuan-2.0.3... done
696Installing gnupg-2.0.20_1...Installing dirmngr-1.1.0_9...Installing pth-2.0.7... done
697 done
698 done
699Installing ru-aspell-0.99.f7.1_1,2... done
700Installing system-config-printer-1.1.16_6...Installing py27-cups-1.9.63... done
701Installing cups-pk-helper-0.0.4_3... done
702 done
703Installing splix-2.0.0_4...Installing libpaper-1.1.24_1... done
704Installing gsfonts-8.11_6... done
705Installing cups-image-1.5.4_1... done
706Installing cups-base-1.5.4_1...Installing xpdf-3.03_4... done
707 done
708 done
709Installing mpage-2.5.6... done
710Installing linux-f10-cups-libs-1.3.11_1... done
711Installing libijs-0.35_1... done
712Installing gutenprint-ijs-5.2.8...Installing gutenprint-base-5.2.8... done
713 done
714Installing gutenprint-foomatic-5.2.8_1...Installing foomatic-db-engine-4.0.7,2... done
715Installing foomatic-db-20090530_3... done
716 done
717Installing gutenprint-cups-5.2.8_1...Installing ghostscript9-9.06_4...Installing svgalib-1.4.3_6... done
718Installing jbig2dec-0.11_1... done
719 done
720Installing cups-pstoraster-8.15.4_7... done
721 done
722Installing gutenprint-5.2.8... done
723Installing foomatic-filters-4.0.7_2...Installing enscript-a4-1.6.4_5... done
724Installing a2ps-4.13b_5... done
725 done
726Installing foo2zjs-20110609_2... done
727Installing cups-smb-backend-1.0_6...Installing samba36-3.6.17... done
728 done
729Installing cups-pdf-2.6.1_1... done
730Installing cups-bjnp-0.5.3_4... done
731Installing pl-aspell-6.0.20061121.0_1,1... done
732Installing x11vnc-0.9.13_1... done
733Installing rsync-3.0.9_3... done
734Installing rdesktop-1.7.1_1... done
735Installing nss_ldap-1.265_7... done
736Installing netatalk-2.2.5,1...Installing db46-4.6.21.4... done
737 done
738Installing mosh-1.2.4...Installing protobuf-2.5.0... done
739 done
740Installing libvncserver-0.9.9_5... done
741Installing webcamd-3.10.0.7...Installing libv4l-0.8.8_1... done
742===> Creating users and/or groups.
743Creating group 'webcamd' with gid '145'.
744Creating user 'webcamd' with uid '145'.
745 done
746Installing pwcview-1.4.1_4...Installing aalib-1.4.r5_6... done
747Installing sdl-1.2.15_2,2... done
748 done
749Installing mplayer-skins-1.1.3_1... done
750Installing mplayer-1.1.r20130308...Installing libvdpau-0.7... done
751Installing libbluray-0.2.2,1...Installing libaacs-0.3.0_1... done
752 done
753 done
754Installing linux_dvbwrapper-kmod-1.0_1... done
755Installing libkate-0.4.1_2... done
756Installing libdvdcss-1.2.12... done
757Installing gstreamer-plugins-bad-0.10.23,3... done
758Installing mc-4.8.8...Installing libslang2-2.2.4_4... done
759 done
760Installing fftw3-3.3.3_1... done
761Installing tcl-8.6.0_2... done
762Installing ruby-1.9.3.448,1... done
763Installing lua-5.1.5_6... done
764Installing ko-baekmukfonts-ttf-2.2... done
765Installing ja-ibus-anthy-1.2.7_2,1...Installing ja-anthy-9100h_1... done
766 done
767Installing ja-font-vlgothic-20130422_1.../usr/local/lib/X11/fonts/TTF: caching, new cache contents: 15 fonts, 0 dirs
768/var/db/fontconfig: cleaning cache directory
769/.cache/fontconfig: not cleaning non-existent cache directory
770/usr/local/bin/fc-cache: succeeded
771 done
772Installing hu-aspell-0.99.4.2.0_1,2... done
773Installing iw-aspell-1.0.0_1,2... done
774Installing xv-3.10a_15... done
775Installing xsane-0.998_3...Installing sane-backends-1.0.23_1...===> Creating users and/or groups.
776Creating group 'saned' with gid '194'.
777Creating user 'saned' with uid '194'.
778 done
779 done
780Installing webp-0.1.3_1... done
781Installing poppler-glib-0.22.2...Installing poppler-data-0.4.6... done
782Installing poppler-0.22.2...Installing openjpeg-1.5.0_2... done
783 done
784 done
785Installing libwmf-0.2.8.4_10... done
786Installing liblqr-1-0.4.1_5... done
787Installing libfpx-1.3.1.1... done
788Installing epdfview-0.1.8_4... done
789Installing ImageMagick-6.8.0.7_1... done
790Installing de-aspell-20030222.1_1... done
791Installing fr-aspell-0.50.3_1,1... done
792Installing virtualbox-ose-kmod-4.2.16... done
793Installing virtualbox-ose-additions-4.2.16... done
794Installing virtualbox-ose-4.2.16_2...Installing py27-distribute-0.6.35... done
795===> Creating users and/or groups.
796Creating group 'vboxusers' with gid '920'.
797Creating user 'vboxusers' with uid '920'.
798215
799239
800 done
801Installing mtools-4.0.10_3... done
802Installing vim-7.3.1314...Installing ctags-5.8... done
803Installing cscope-15.8a... done
804 done
805Installing emacs-24.3,3... done
806Installing nss_mdns-0.10_2... done
807Installing readline-6.2.4... done
808Installing libgtop-2.28.4... done
809Installing zh-libchewing-0.3.4... done
810Installing zh-ibus-pinyin-1.4.0_1... done
811Installing zh-ibus-chewing-1.4.3_1... done
812Installing vorbis-tools-1.4.0_6,3... done
813Installing linux-f10-alsa-plugins-oss-1.0.21_3...Installing linux-f10-alsa-lib-1.0.21_3... done
814 done
815Installing libcdaudio-0.99.12p2_2... done
816Installing gstreamer-plugins-cdparanoia-0.10.36,3...Installing cdparanoia-3.9.8_9... done
817 done
818Installing gstreamer-plugins-cdaudio-0.10.23,3... done
819Installing alsa-lib-1.0.26... done
820Installing zip-3.0... done
821Installing rpm2cpio-1.3_1... done
822Installing rar-4.2.0,3... done
823Installing ar-aspell-1.2.0_1,1... done
824Installing at-spi-1.32.0_2... done
825 done
826Make sure that the freetype module is loaded.  If it is not, add the following
827line to the "Modules" section of your X Windows configuration file:
828
829        Load "freetype"
830
831Add the following line to the "Files" section of X Windows configuration file:
832
833        FontPath "/usr/local/lib/X11/fonts/dejavu/"
834
835Note: your X Windows configuration file is typically /etc/X11/XF86Config
836if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org.
837====
838Note that some of the standard modules are provided as separate
839ports since they require extra dependencies:
840
841bsddb           databases/py-bsddb
842gdbm            databases/py-gdbm
843sqlite3         databases/py-sqlite3
844tkinter         x11-toolkits/py-tkinter
845
846Install them as needed.
847====
848The following catalogs are installed:
849
850 1) /usr/local/share/sgml/catalog
851
852   The top level catalog for SGML stuff.  It is not changed
853   by any ports/packages except textproc/xmlcatmgr.
854
855 2) /usr/local/share/sgml/catalog.ports
856
857   This catalog is for handling SGML stuff installed under
858   /usr/local/share/sgml.  It is changed by ports/packages.
859
860 3) /usr/local/share/xml/catalog
861
862   The top level catalog for XML stuff.  It is not changed
863   by any ports/packages except textproc/xmlcatmgr.
864
865 4) /usr/local/share/xml/catalog.ports
866
867   This catalog is for handling XML stuff installed under
868   /usr/local/share/xml.  It is changed by ports/packages.
869================================================================================
870You installed xterm with wide chars support. This introduces some limitations
871comparing to the plain single chars version: this version of xterm will use
872UTF-8 charset for selection buffers, breaking 8-bit copy/paste support unless
873you are using UTF-8 or ISO8859-1 locale. If you want 8-bit charset selections to
874work as before, use "eightBitSelectTypes" XTerm resource setting.
875
876For further information refer to the SELECT/PASTE section of xterm(1) manual
877page.
878================================================================================
879Since FreeBSD has new USB stack, freeglut normally doesn't build on FreeBSD 8
880(yet). To workaround this a small patch adds one include file and comments out
881content of one function (only leaves return NULL).
882
883This might cause side effects.  Joysticks do not work, and there might be ports
884that do not compile or applications that crash because of this.
885
886Do not hesitate to contact x11@FreeBSD.org if there are any issues and side
887effects because of this.
888======================================================================
889
890Qt 4 can be built with optional support for:
891 - Common UNIX Printing System (CUPS) (enabled by default)
892 - Network Audio System (NAS)
893 - Qt style that renders using GTK (QGTKSTYLE)
894
895In order to enable them, you have to add
896        QT4_OPTIONS=    CUPS NAS QGTKSTYLE
897to your /etc/make.conf and compile devel/qt4-corelib and
898x11-toolkits/qt4-gui ports.
899
900Attention! Whenever you change the QT4_OPTIONS both
901devel/qt4-corelib and x11-toolkits/qt4-gui ports must be rebuilt!
902
903======================================================================
904======================================================================
905
906Qt paint engine makes common use of shared memory. To avoid MIT-SHM
907errors (i.e., blank windows), you probably need to raise shared memory
908limits in loader.conf(5). The following should be safe values for the
909KDE Plasma Desktop:
910
911kern.ipc.shmall=32768
912kern.ipc.shmmni=1024
913kern.ipc.shmseg=1024
914
915======================================================================
916This software is based in part on the work of the FreeType Team.
917See <URL:http://www.freetype.org/>.
918
919Installation of the Linux base system is finished. The Linux kernel
920mode, which must be enabled for Linux binaries to run, is now
921enabled. Linux mode can be enabled permanently with the linux_enable
922variable of rc.conf(5).
923
924If you want to use shared memory in Linux applications, you need to set up
925a link from /dev/shm to a suitable place, e.g. by adding the following line
926to /etc/devfs.conf (takes effect on each boot):
927        link /tmp shm
928
929To make use of NIS you have to adjust yp.conf and nsswitch.conf in
930/compat/linux/etc/ accordingly. For example:
931
932Set your yp-server and yp-domainname in yp.conf:
933        domainname      my.yp.domainname
934        ypserver        my.yp.server
935
936Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
937        passwd: files nis
938        shadow: files nis
939        group:  files nis
940        hosts:  files dns nis
941
942WARNING: doing work which needs to chroot into the linux base may not work.
943In such cases (e.g. cross-development) you are better suited with a linux_dist
944port.
945===============================================================================
946
947Gamin will only provide realtime notification of changes for at most n files,
948where n is the minimum value between (kern.maxfiles * 0.7) and
949(kern.maxfilesperproc - 200). Beyond that limit, files will be polled.
950
951If you often open several large folders with Nautilus, you might want to
952increase the kern.maxfiles tunable (you do not need to set
953kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles).
954
955For a typical desktop, add the following line to /boot/loader.conf, then
956reboot the system:
957
958    kern.maxfiles="25000"
959
960The behavior of gamin can be controlled via the various gaminrc files.
961See http://www.gnome.org/~veillard/gamin/config.html on how to create
962these files.  In particular, if you find gam_server is taking up too much
963CPU time polling for changes, something like the following may help
964in one of the gaminrc files:
965
966# reduce polling frequency to once per 10 seconds
967# for UFS file systems in order to lower CPU load
968fsset ufs poll 10
969
970===============================================================================
971The ESounD daemon (esd) must be started on a per-user basis.  This is typically
972done by the Session Manager in GNOME.  However, if you are not using the
973GNOME Desktop, you will need to add something like the following to your
974X Windows initialization script:
975
976esd -terminate -nobeeps -as 2
977###############################################################################
978
979Idesk was installed
980
981You need to configure idesk before you can use it. A detailed explanation can
982be found in the README file which resides in:
983
984/usr/local/share/doc/idesk
985
986Unless you have chosen not to install it ;)
987
988###############################################################################
989************************************************************
990
991The OpenLDAP client package has been successfully installed.
992
993Edit
994  /usr/local/etc/openldap/ldap.conf
995to change the system-wide client defaults.
996
997Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at
998  http://www.OpenLDAP.org/faq/index.cgi?file=3
999for more information.
1000
1001************************************************************
1002GDM is installed.
1003
1004Do _NOT_ use /etc/ttys to start gdm at boot time.  This will result in gdm
1005hanging or restarting constantly. Instead, add gdm_enable="YES" to
1006/etc/rc.conf. GDM will be started automatic on the next reboot.
1007IMPORTANT - READ CAREFULLY: You may not use these fonts if you do not agree to
1008the terms of the Microsoft End-User License Agreement ("EULA").  You will find
1009the EULA at /usr/local/share/doc/webfonts/LICENSE.  If you read and agree
1010to the EULA, you can start using the fonts by following these instructions:
1011
1012Make sure that the freetype module is loaded.  If it is not, add the following
1013line to the "Modules" section of xorg.conf or XF86Config:
1014
1015        Load "freetype"
1016
1017Add the following line to the "Files" section of xorg.conf or XF86Config:
1018
1019        FontPath "/usr/local/lib/X11/fonts/webfonts/"
1020*******************************************************************************
1021
1022        To enable QT's database support, install the database plugin ports.
1023        The following plugin ports are available:
1024
1025                IBase/Firebird  - databases/qt4-ibase-plugin
1026                MySQL           - databases/qt4-mysql-plugin
1027                ODBC            - databases/qt4-odbc-plugin
1028                PostgreSQL      - databases/qt4-pgsql-plugin
1029                SQLite          - databases/qt4-sqlite-plugin                           
1030
1031*******************************************************************************
1032================================================================
1033
1034The nspluginwrapper is installed on a per user basis. All of
1035the commands can be run as an unprivileged user.
1036
1037================================================================
1038
1039To install all the plugins from their default locations:
1040
1041nspluginwrapper -v -a -i
1042
1043================================================================
1044
1045To install a specific plugin:
1046
1047nspluginwrapper -i path/to/plugin.so
1048
1049================================================================
1050
1051To remove a specific plugin:
1052
1053nspluginwrapper -r path/to/plugin.so
1054
1055================================================================
1056
1057To view all currently installed plugins:
1058
1059nspluginwrapper -l
1060
1061================================================================
1062-------------------------------------------------------------------
1063ibus installation finished. To use ibus, please do the following:
1064
1065If you are using bash, please add following lines to your $HOME/.bashrc:
1066
1067export XIM=ibus
1068export GTK_IM_MODULE=ibus
1069export QT_IM_MODULE=xim
1070export XMODIFIERS=@im=ibus
1071export XIM_PROGRAM="ibus-daemon"
1072export XIM_ARGS="--daemonize --xim"
1073
1074If you are using tcsh, please add following lines to your $HOME/.cshrc:
1075
1076setenv XIM ibus
1077setenv GTK_IM_MODULE ibus
1078setenv QT_IM_MODULE xim
1079setenv XMODIFIERS @im=ibus
1080setenv XIM_PROGRAM ibus-daemon
1081setenv XIM_ARGS "--daemonize --xim"
1082
1083If you are using KDE4, you may create a shell script in $HOME/.kde4/env,
1084and add following lines:
1085
1086#!/bin/sh
1087export XIM=ibus
1088export GTK_IM_MODULE=ibus
1089export QT_IM_MODULE=xim
1090export XMODIFIERS=@im=ibus
1091export XIM_PROGRAM="ibus-daemon"
1092export XIM_ARGS="--daemonize --xim"
1093
1094Following input methods/engines are available in ports:
1095
1096chinese/ibus-chewing            Chewing engine for IBus
1097chinese/ibus-pinyin             The PinYin input method
1098japanese/ibus-anthy             Anthy engine for IBus
1099japanese/ibus-mozc              Mozc engine for IBus
1100japanese/ibus-skk               SKK engine for IBus
1101korean/ibus-hangul              Hangul engine for IBus
1102textproc/ibus-kmfl              KMFL IMEngine for IBus framework
1103textproc/ibus-m17n              The m17n IMEngine for IBus framework
1104textproc/ibus-table             Table based IM framework for IBus
1105
1106and QT4 input method module, textproc/ibus-qt.
1107
1108If ibus cannot start or the panel does not appear, please ensure
1109that you are using up-to-date python.
1110There's a bug in python 2.5, which may prevent the panel from appearing.
1111-------------------------------------------------------------------
1112--------------------------------------------------------
1113ibus-qt install finished. You may select ibus as the
1114input method in qtconfig.
1115
1116--------------------------------------------------------
1117==============================================================================
1118
1119To use uhidd daemon for USB HID devices, depends on which sub class
1120driver you want to attach, to avoid confilicts between the daemon and
1121the kernel drivers, you should either use the command line option '-u'
1122to instruct the daemon to detach active kernel drivers attached to
1123a device, or you should remove some of those entries 'device ums',
1124'device ukbd', or 'device uhid' from your kernel config file and
1125recompile the kernel.
1126
1127Note that if the USB kernel drivers are compiled as kernel modules,
1128you should also remove the relevant devd(8) rules in /etc/devd/usb.conf
1129config file, so those modules will not be loaded automatically by devd(8)
1130when devices are attached.
1131
1132If you want to run uhidd deamon at the startup, add the following lines to
1133/etc/rc.conf:
1134
1135        uhidd_flags="-kmohsu"
1136        uhidd_enable="YES"
1137
1138Note that you need to modify the uhidd_flags (command line options)
1139according to which sub class drivers you want to use.
1140
1141To manually start/stop uhidd daemon on certain device, run:
1142
1143        /usr/local/etc/rc.d/uhidd [start|stop] /dev/ugen.X.Y
1144
1145See http://wiki.FreeBSD.org/uhidd for more details about how to install and
1146setup the daemon.
1147
1148==============================================================================
1149smartmontools has been installed
1150
1151To check the status of drives, use the following:
1152
1153        /usr/local/sbin/smartctl -a /dev/ad0    for first ATA/SATA drive
1154        /usr/local/sbin/smartctl -a /dev/da0    for first SCSI drive
1155        /usr/local/sbin/smartctl -a /dev/ada0   for first SATA drive
1156
1157To include drive health information in your daily status reports,
1158add a line like the following to /etc/periodic.conf:
1159        daily_status_smart_devices="/dev/ad0 /dev/da0"
1160substituting the appropriate device names for your SMART-capable disks.
1161
1162To enable drive monitoring, you can use /usr/local/sbin/smartd.
1163A sample configuration file has been installed as
1164/usr/local/etc/smartd.conf.sample
1165Copy this file to /usr/local/etc/smartd.conf and edit appropriately
1166
1167To have smartd start at boot
1168        echo 'smartd_enable="YES"' >> /etc/rc.conf
1169======================================================================
1170
1171You'll have to install sysutils/zeitgeist to enable event logging.
1172
1173======================================================================
1174*** NOTE ***
1175To successfully create an installation of Debian GNU/kFreeBSD
1176debootstrap requires the following kernel modules loaded:
1177
1178fdescfs linprocfs linsysfs tmpfs
1179======================================================================
1180
1181Please, consider installing backends for Phonon:
1182- multimedia/phonon-gstreamer   GStreamer backend
1183- multimedia/phonon-vlc         VLC backend
1184
1185======================================================================
1186======================================================================
1187
1188You'll need to install some GStreamer plugins to make Phonon able to
1189play something via this backend: multimedia/gstreamer-plugins-all will
1190let you choose among all of them.
1191
1192======================================================================
1193#############################################################
1194To install GRUB on the master boot record of your hard drive
1195use 'grub-install <drive-to-install>' command.
1196
1197A typical menu entry in /boot/grub/grub.cfg for FreeBSD:
1198menuentry "FreeBSD" {
1199        set root="(hd0,msdos1,bsd1)"
1200        kfreebsd /boot/loader
1201}
1202Or use grub-mkconfig to create the config file.
1203#############################################################
1204Install the fuse kernel module to use this port.
1205==============================================================================
1206
1207In order to automatically load the fuse module on startup, you need to:
1208
1209 - Add fusefs_enable="YES" to your /etc/rc.conf.
1210 - Run "/usr/local/etc/rc.d/fusefs start" (for the first time).
1211
1212Set "sysctl vfs.usermount=1" if you want to be able to mount fuse devices as
1213an ordinary user.
1214
1215Now fuse filesystems (sysutils/fusefs-*) can be mounted at startup from
1216/etc/fstab with the "late" parameter. This requires a symlink in /usr/sbin
1217named "mount_<fstype>", which is not created by all the fusefs ports.
1218
1219Note that the rc.d script will unmount all fuse filesystems when called with
1220"stop" (in reverse order in case of nested mounts), so it can unload the
1221kernel module.
1222
1223==============================================================================
1224==============================================================================
1225
1226NTFS-3G has been installed, for information, known issues and how to report
1227bugs see the FreeBSD README:
1228
1229/usr/local/share/doc/ntfs-3g/README.FreeBSD
1230
1231Also see the official README (but has some Linux specific parts).
1232
1233==============================================================================
1234===========================================================================
1235
1236Note: The location of the cdrtools `defaults' files has been set to
1237
1238        /usr/local/etc
1239
1240This is the FreeBSD ports standard config file location, NOT the cdrtools
1241standard location, which is /etc/default.
1242
1243The reason for this is that FreeBSD ports and packages should not use
1244configuration files outside of /usr/local.
1245
1246===========================================================================
1247
1248- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1249
1250Please do not edit the fail2ban.conf and jail.conf files as they
1251will be overwritten upon each upgrade of the port.
1252
1253Instead, create new files named fail2ban.local and jail.local
1254
1255For more information, see the official manual:
1256
1257http://www.fail2ban.org/wiki/index.php/MANUAL_0_8#Configuration
1258
1259- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1260
1261You may want to add something like this to your /etc/pam.d/login
1262or /etc/pam.d/sshd ( when you've configured ssh with PAM )
1263file to use this module:
1264
1265session         required       /usr/local/lib/pam_mkhomedir.so
1266================================================================================
1267Copy /usr/local/etc/ldap.conf.dist to /usr/local/etc/ldap.conf, then edit
1268/usr/local/etc/ldap.conf in order to use this module.  Add a line similar to
1269the following to /etc/pam.conf on 4.X, or create an /etc/pam.d/ldap on 5.X
1270and higher with a line similar to the following:
1271
1272login   auth    sufficient      /usr/local/lib/pam_ldap.so
1273================================================================================
1274After installation, you need to edit the ossec.conf file to reflect
1275the correct settings for your environment.  All the files related
1276to ossec-hids have been installed in /usr/local/ossec-hids and
1277its subdirectories.
1278
1279For information on proper configuration, see http://www.ossec.net/.
1280
1281To enable the startup script, add ossechids_enable="YES" to
1282/etc/rc.conf.  To enable database output, execute:
1283
1284/usr/local/ossec-hids/bin/ossec-control enable database
1285
1286Then check this documentation:
1287
1288http://www.ossec.net/doc/manual/output/database-output.html
1289
1290When you deinstall this port after starting the daemons once, many
1291directories that are created by the daemons will remain.  To fully
1292remove the port you need to delete those directories manually.  To
1293further enhance the security on your system, you may also enable
1294some checks in PAM for a fast reaction against intrusions.
1295###############################################################################
1296                                A T T E N T I O N
1297
1298In order to use gpg-agent, you need to install a pinentry dialog.
1299
1300The following ports of pinentry dialogs are available:
1301
1302security/pinentry-curses        (ncurses based dialog)
1303security/pinentry-gtk           (GTK 1.2 based dialog)
1304security/pinentry-gtk2          (GTK 2.x based dialog)
1305security/pinentry-qt            (QT3 based dialog)
1306security/pinentry-q4            (QT4 based dialog)
1307
1308###############################################################################
1309======================================================================
1310
1311To enable printing with local printer you need to give group 'cups'
1312r/w access to printer device:
1313
13141) Add following to /etc/devfs.rules (create if it doesn't exist):
1315
1316[system=10]
1317# FreeBSD 7.x
1318add path 'unlpt*' mode 0660 group cups
1319add path 'ulpt*' mode 0660 group cups
1320add path 'lpt*' mode 0660 group cups
1321# FreeBSD 8.x
1322add path 'usb*' mode 0770 group cups
1323add path 'ugen*' mode 0660 group cups
1324
13252) And following to /etc/rc.conf:
1326
1327devfs_system_ruleset="system"
1328
13293) Restart devfs: /etc/rc.d/devfs restart
1330
1331If your system supports 'devd' you can copy
1332$PREFIX/share/examples/cups/ulpt-cupsd.conf to $PREFIX/etc/devd/
1333
1334To enable printing under Gimp and MS-Windows clients do the following:
1335
13361) Uncomment application/octet-stream line in mime.types
13372) Uncomment application/octet-stream line in mime.convs
13383) Restart cupsd
1339
1340If you are using libusb, it is important that no device driver, e.g.
1341ulpt(4) is attached to the device you wish to use. In this case please
1342ensure the cups user and group has read/write access to /dev/ugen*
1343
1344If you are using a USB printer wtih FreeBSD 8.0 or later, you will
1345need to find the proper /dev/usb/* device pointed at by the /dev/ugen*
1346entry. Follow the instructions for devfs.rules as above, but append a
1347rule similar to the following for a printer attached as /dev/ugen0.2:
1348
1349add path 'usb/0.2.*' mode 0660 group cups
1350======================================================================
1351  +=======================================================================+
1352  |                  !!!      IMPORTANT NOTICE      !!!                   |
1353  +=======================================================================+
1354  |      If you are upgrading your current version, you MUST delete       |
1355  |     your printer in the CUPS interface and install it again. This     |
1356  |   operation MUST be done since CUPS make a copy of the PPD file and   |
1357  |                this file is modified between versions.                |
1358  +=======================================================================+
1359
1360Installation of the color profile for color printers:
1361-----------------------------------------------------
1362
1363        Color printers needs color profile files to get better results. These
1364files are provided by your printer manufacturer and you have to install them
1365manually. To do that, download the linux official drivers and locate the "cms"
1366directory. Install them with the command:
1367
1368                # make installcms CMSDIR=/path/to/cms/directory \
1369                        MANUFACTURER=samsung or xerox or dell
1370
1371        Samsung color profile files are available at:
1372                (Then use MANUFACTURER=samsung)
1373
1374                http://splix.ap2c.org/samsung_cms.tar.bz2
1375Note: in order to use the script "dvipdf", dvips must be installed.
1376This program may be provided by either print/dvips or print/dvipsk-tetex
1377(print/dvipsk-tetex may be preferable since it doesn't conflict with
1378tetex things).
1379
1380FAPIfontmap and FAPIcidfmap in /usr/local/share/ghostscript/9.06/Resource/Init
1381have to be configured if you want to use FAPI feature.
1382###############################################################################
1383
13841) Please read the detailed installation instructions in the file:
1385
1386   * /usr/local/share/doc/foo2zjs/INSTALL
1387
13882) Go to tmp directory and run getweb script.
1389
1390   # cd /tmp && getweb all
1391
13923) Copy icm and img files.
1393
1394   # cp DL*.icm CP*.icm km2430*.icm /usr/local/share/foo2zjs/icm && \
1395     cp sihp*.img /usr/local/share/foo2zjs/firmware && \
1396     cp hpclj26*.icm km2430*.icm /usr/local/share/foo2hp/icm && \
1397     rm *.icm *.img
1398
13994) Enjoy it ;)
1400
1401###############################################################################
1402===============================================================================
1403Samba3 *package* now doesn't include ADS support due the portability problems
1404with Kerberos5 libraries on different installations. You need to compile the
1405port yourself to get this functionality.
1406
1407For additional hints and directions, please, look into the README.FreeBSD file.
1408===============================================================================
1409CUPS smb backend is now installed.
1410
1411Please configure your samba environment if
1412you haven't already done so. To do so edit
1413
1414/usr/local/etc/smb.conf
1415
1416You can then add a new printer to CUPS.
1417smbspool(8) manpage describes device URI
1418format. In most cases (latest samba 2.x
1419and samba 3.x), it's something like this:
1420
1421smb://username:password@server/printer
1422smb://username:password@workgroup/server/printer
1423
1424But a CUPS article describes another syntax,
1425so beware.
1426=====================================================================
1427The nss_ldap module expects to find its configuration files at the
1428following paths:
1429
1430LDAP configuration:     /usr/local/etc/nss_ldap.conf
1431LDAP secret (optional): /usr/local/etc/nss_ldap.secret
1432
1433
1434WARNING: For users of previous versions of this port:
1435WARNING:
1436WARNING: Previous versions of this port expected configuration files
1437WARNING: to be located at /etc/ldap.conf and /etc/ldap.secret.  You
1438WARNING: may need to move these configuration files to their new
1439WARNING: location specified above.
1440=====================================================================
1441###
1442If you compiled WITH_PAM support, you need to edit /etc/pam.conf to add
1443support for netatalk.  To do so, add the following three lines to this
1444file:
1445
1446netatalk        auth    required        pam_unix.so     try_first_pass
1447netatalk        account required        pam_unix.so     try_first_pass
1448netatalk        session required        pam_permit.so
1449###
1450=====================================================================
1451Please note that mosh requires UTF-8 character set.  To set this on a
1452per-user basis, you should add the following to ~/.login_conf:
1453me:\
1454        :charset=UTF-8:\
1455        :lang=en_US.UTF-8:\
1456        :setenv=LC_COLLATE=C:
1457
1458This only needs to be completed on the client.
1459=====================================================================
1460*********************************************************************
14611) webcamd requires the cuse4bsd kernel module, please load this
1462by doing
1463
1464       # kldload cuse4bsd
1465
1466or adding
1467
1468       cuse4bsd_load="YES"
1469
1470to your /boot/loader.conf.
1471
14722) Please restart devd as the configuration changed
1473
1474        # service devd restart
1475
1476*********************************************************************
1477------------------------------------------------------------------------------
1478 Your SDL library has been built with libvgl support, which means that you
1479 can run almost any SDL application straight on your console (VESA 2.0
1480 compatible videocard is required).
1481
1482 To do this you have to load the vesa kernel module or enable it in your
1483 kernel, and set environment variable "SDL_VIDEODRIVER=vgl".
1484------------------------------------------------------------------------------
1485
1486===================================================================
1487MPlayer's comprehensive documentation covers many topics like
1488output devices, video encoding, repairing broken files etc.
1489It is auto-generated daily and can be found on the project
1490homepage in the documentation section:
1491
1492http://www.mplayerhq.hu/design7/documentation.html
1493===================================================================
1494MPlayer's system-wide configuration dir is
1495
1496/usr/local/etc/mplayer
1497
1498If you want to install configuration files into this location
1499in order to change mplayer's default settings for all users on
1500your system, you find some examples in
1501
1502/usr/local/share/mplayer/examples/etc
1503===================================================================
1504====
1505Some of the standard commands are provided as separate ports for ease
1506of upgrading:
1507
1508        devel/ruby-gems:        gem - RubyGems package manager
1509        devel/rubygem-rake:     rake - Ruby Make
1510
1511And some of the standard libraries are provided as separate ports
1512since they require extra dependencies:
1513
1514        converters/ruby-iconv:  iconv module
1515        databases/ruby-gdbm:    GDBM module
1516        x11-toolkits/ruby-tk:   Tcl/Tk modules
1517        japanese/ruby-tk:       Tcl/Tk modules for Japanized Tcl/Tk
1518        lang/ruby-mode.el:      Emacs lisp modules
1519
1520Install them as occasion demands.
1521====
1522ibus-anthy installation finished. To use ibus-anthy, please do the following:
1523
1524If you are using bash or zsh, please add following lines to your $HOME/.bashrc or
1525$HOME/.zshrc:
1526
1527export XIM=ibus
1528export GTK_IM_MODULE=ibus
1529export QT_IM_MODULE=xim
1530export XMODIFIERS=@im=ibus
1531export XIM_PROGRAM="ibus-daemon"
1532export XIM_ARGS="-r --daemonize --xim"
1533
1534If you are using tcsh, please add following lines to your $HOME/.cshrc:
1535
1536setenv XIM ibus
1537setenv GTK_IM_MODULE ibus
1538setenv QT_IM_MODULE xim
1539setenv XMODIFIERS @im=ibus
1540setenv XIM_PROGRAM ibus-daemon
1541setenv XIM_ARGS "-r --daemonize --xim"
1542
1543If you are using KDE4, you may create a shell script in $HOME/.kde4/env,
1544and add following lines:
1545
1546#!/bin/sh
1547export XIM=ibus
1548export GTK_IM_MODULE=ibus
1549export QT_IM_MODULE=xim
1550export XMODIFIERS=@im=ibus
1551export XIM_PROGRAM="ibus-daemon"
1552export XIM_ARGS="-r --daemonize --xim"
1553
1554If ibus cannot start or the panel does not appear, please ensure
1555that you are using up-to-date python.
1556There's a bug in python 2.5, which may prevent the panel from appearing.
1557==================================================================
1558
1559saned will log to the 'daemon' facility; this is a hard-coded
1560default. Also, saned has no support for SSL/TLS or cryptographic
1561authentication; you may wish to deploy security/stunnel to wrap
1562it if you have concerns about security.
1563
1564If you are using a USB scanner, you should create
1565/usr/local/etc/devd/saned.conf to allow saned access permissions.
1566Currently, devfs.rules(5) has no support for USB specific filters
1567such as vendor, product and serial number.
1568
1569Here is an example saned.conf for an Epson CX3650
1570multi-function scanner/printer device (assuming you are sharing
1571the printer function with cups):
1572
1573notify 100 {
1574        match "system" "USB";
1575        match "subsystem" "INTERFACE";
1576        match "type" "ATTACH";
1577        match "cdev" "ugen[0-9].[0-9]";
1578        match "vendor" "0x04b8";
1579        match "product" "0x080e";
1580        action "chown -L cups:saned /dev/$cdev && chmod -L 660 /dev/$cdev";
1581};
1582
1583To determine which port your scanner is connected to, inspect the
1584output of 'usbconfig list' before and after connecting your scanner,
1585and note the numbers which appear after 'ugen' in the first column.
1586Then, use 'usbconfig -d X.Y dump_device_desc' to learn the idVendor
1587and idProduct fields, and plug them into the above example entry.
1588
1589Finally, restart devd with the command:
1590 # /etc/rc.d/devd restart
1591
1592Please take /usr/local/etc/sane.d/dll.conf
1593as an example only; you may wish to enable only the 'net' backend
1594on client machines; be sure to point it at your scan server.
1595
1596If you are setting up a scan server, you may also wish to edit
1597/usr/local/etc/sane.d/saned.conf
1598to only permit specific machines.
1599
1600==================================================================
1601==========================================================================
1602NOTE: In order to compile examples for liblqr, you will
1603also need pngwriter port (/usr/ports/graphics/pngwriter).
1604Examples are located in /usr/local/share/examples/liblqr-1
1605==========================================================================
1606=============================================================================
1607
1608VirtualBox Guest Additions were installed.
1609
1610
1611You need to enable the vboxguest startscript to load the kernel module and
1612vboxservice to use host time synchronization.
1613
1614vboxguest_enable="YES"
1615vboxservice_enable="YES"
1616
1617You also have to add all X11 users that want to use any of the additional
1618features (clipboard sharing, window scaling) to the wheel group.
1619
1620% pw groupmod wheel -m jerry
1621
1622Reboot the machine to load the needed kernel modules.
1623
1624For detailed informations please visit http://wiki.freebsd.org/VirtualBox
1625
1626=============================================================================
1627=============================================================================
1628
1629VirtualBox was installed.
1630
1631You need to load the vboxdrv kernel module via /boot/loader.conf:
1632
1633vboxdrv_load="YES"
1634
1635You also have to add all users to your vboxusers group in order to use vbox.
1636
1637% pw groupmod vboxusers -m jerry
1638
1639Reboot the machine to load the needed kernel modules.
1640
1641
1642Bridging Support:
1643=================
1644
1645For bridged networking please add the following line to your /etc/rc.conf:
1646
1647vboxnet_enable="YES"
1648
1649
1650USB Support:
1651============
1652
1653For USB support your user needs to be in the operator group and needs read
1654and write permissions to the USB device.
1655
1656% pw groupmod operator -m jerry
1657
1658Add the following to /etc/devfs.rules (create if it doesn't exist):
1659
1660[system=10]
1661add path 'usb/*' mode 0660 group operator
1662
1663To load these new rule add the following to /etc/rc.conf:
1664
1665devfs_system_ruleset="system"
1666
1667Then restart devfs to load the new rules:
1668
1669% /etc/rc.d/devfs restart
1670
1671
1672Troubleshooting:
1673================
1674
1675Running VirtualBox as non-root user may fail with a fatal error
1676NS_ERROR_FACTORY_NOT_REGISTERED. In this case delete /tmp/.vbox-*-ipc file.
1677
1678Check wiki page for known issues and troubleshooting:
1679http://wiki.freebsd.org/VirtualBox
1680
1681Please report any problems to emulation@. Thanks!
1682
1683=============================================================================
1684************************************************************
1685Please verify /usr/local/etc/mtools.conf for your machine.
1686************************************************************
1687**************************************************************************
1688The executable for Exuberant CTAGS is installed as /usr/local/bin/exctags
1689**************************************************************************
1690===============================================================================
1691
1692In order to use the File System read/write monitor, you must chmod
1693/dev/devstat so that all users can open it read-only.  For example:
1694
1695# chmod 0444 /dev/devstat
1696
1697In order for this to persist across reboots, add the following to
1698/etc/devfs.conf:
1699
1700perm    devstat 0444
1701
1702===============================================================================
1703Running chroot command: pkg info -e pcbsd-meta-kde-1373648951.txz
1704Installing package: pcbsd-meta-kde-1373648951.txz
1705Installing pcbsd-meta-kde-1373648951...Installing xcb-util-image-0.3.9... done
1706Installing qimageblitz-0.0.6_2... done
1707Installing py27-qt4-opengl-4.10.2,1...Installing py27-qt4-gui-4.10.2,1...Installing qt4-designer-4.8.4... done
1708Installing qscintilla2-2.7.2,1... done
1709Installing py27-sip-4.14.7,1... done
1710Installing py27-qt4-core-4.10.2,1... done
1711 done
1712 done
1713Installing plasma-scriptengine-ruby-4.10.5...Installing kdelibs-4.10.5...Installing shared-desktop-ontologies-0.11.0... done
1714Installing attica-0.4.2,2... done
1715Installing kde4-icons-oxygen-4.10.5... done
1716Installing soprano-2.9.3...Installing redland-1.0.16...Installing rasqal-0.9.30...Installing raptor2-2.0.9_1...Installing yajl-2.0.4_1... done
1717 done
1718 done
1719 done
1720Installing libiodbc-3.52.8... done
1721 done
1722Installing enchant-1.6.0_1... done
1723Installing clucene-2.3.3.4_2... done
1724Installing polkit-qt-0.103.0_1... done
1725Installing mDNSResponder-333.10... done
1726Installing hupnp-1.0.0_1... done
1727Installing xvid-1.3.2,1... done
1728Installing x264-0.125.2201...Installing gpac-libgpac-0.4.5_6,1... done
1729 done
1730Installing schroedinger-1.0.11_1... done
1731Installing libvpx-1.1.0... done
1732Installing libtheora-1.1.1_3... done
1733Installing ffmpeg1-1.2.2...Installing opencv-core-2.3.1_7... done
1734Installing lame-3.99.5_1... done
1735 done
1736Installing kde4-shared-mime-info-1.2... done
1737Installing ilmbase-1.0.3... done
1738Installing exiv2-0.23,1... done
1739Installing OpenEXR-1.7.1... done
1740Installing qca-2.0.3_1... done
1741Installing libdbusmenu-qt-0.9.2_2... done
1742Installing libstreams-0.7.8... done
1743Installing libstreamanalyzer-0.7.8_1... done
1744 done
1745Installing kactivities-4.10.5...Installing nepomuk-core-4.10.5...Installing poppler-qt4-0.22.2... done
1746Installing taglib-1.8... done
1747 done
1748 done
1749Installing qwt-5.2.3... done
1750Installing ebook-tools-0.2.2...Installing libzip-0.11.1... done
1751 done
1752Installing gpgme-1.3.2... done
1753Installing cyrus-sasl-2.1.26_2...*** Added group `cyrus' (id 60)
1754*** Added user `cyrus' (id 60)
1755 done
1756Installing libspectre-0.2.6_1... done
1757Installing e2fsprogs-libuuid-1.42.8... done
1758Installing chmlib-0.40... done
1759Installing prison-1.0_1...Installing libqrencode-3.4.3... done
1760Installing libdmtx-0.7.4_3... done
1761 done
1762Installing okular-4.10.5...Installing djvulibre-3.5.25.3_1... done
1763 done
1764Installing kate-4.10.5...Installing qjson-0.8.1... done
1765 done
1766Installing smokeqt-4.10.5...Installing smokegen-4.10.5... done
1767 done
1768Installing smokekde-4.10.5...Installing boost-libs-1.52.0_2... done
1769Installing kdepimlibs-4.10.5...Installing qt4-mysql-plugin-4.8.4...Installing mysql-client-5.5.33... done
1770 done
1771Installing mysql-server-5.5.33...===> Creating users and/or groups.
1772Creating group 'mysql' with gid '88'.
1773Creating user 'mysql' with uid '88'.
1774 done
1775Installing akonadi-1.10.2... done
1776 done
1777 done
1778Installing ruby19-qtruby-4.10.5... done
1779Installing ruby19-korundum-4.10.5... done
1780 done
1781Installing plasma-scriptengine-python-4.10.5...Installing py27-qt4-webkit-4.10.2... done
1782Installing py27-qt4-xml-4.10.2,1... done
1783Installing py27-qt4-network-4.10.2,1... done
1784Installing py27-qt4-phonon-4.10.2... done
1785Installing py27-qt4-svg-4.10.2,1... done
1786Installing py27-qt4-script-4.10.2,1... done
1787Installing py27-qt4-designer-4.10.2,1... done
1788Installing py27-qt4-declarative-4.10.2... done
1789Installing py27-qt4-dbussupport-4.10.2... done
1790Installing py27-pykde4-4.10.5...Installing py27-qt4-sql-4.10.2,1... done
1791 done
1792 done
1793Installing libkonq-4.10.5... done
1794Installing konsole-4.10.5... done
1795Installing kde-workspace-4.10.5...Installing kactivitymanagerd-4.10.5... done
1796Installing gstreamer-plugins-pango-0.10.36_1,3... done
1797Installing kde4-wallpapers-freebsd-1.0... done
1798Installing kde-wallpapers-4.10.5... done
1799Installing kde-base-artwork-4.10.5... done
1800Installing polkit-kde-0.99.1... done
1801Installing ksysguardd-4.10.5... done
1802Installing kcm-polkit-kde-0.0.20121008... done
1803Installing pam_kde-1.0... done
1804Installing libdvdread-4.2.0_2... done
1805Installing libdca-0.0.5... done
1806Installing gstreamer-plugins-xvid-0.10.23,3... done
1807Installing gstreamer-plugins-ugly-0.10.19,3... done
1808Installing gstreamer-plugins-theora-0.10.36,3... done
1809Installing gstreamer-plugins-dvd-0.10.19,3... done
1810Installing gstreamer-plugins-dts-0.10.23,3... done
1811Installing gstreamer-plugins-core-0.10_13...Installing gstreamer-ffmpeg-0.10.13... done
1812Installing gstreamer-plugins-libpng-0.10.31,3... done
1813Installing liba52-0.7.4_2... done
1814Installing gstreamer-plugins-vorbis-0.10.36,3...Installing gstreamer-plugins-ogg-0.10.36,3... done
1815 done
1816Installing gstreamer-plugins-mp3-0.10.0_1...Installing gstreamer-plugins-mad-0.10.19,3... done
1817 done
1818Installing gstreamer-plugins-a52dec-0.10.19,3... done
1819 done
1820Installing kde4-xdg-env-1.0.1... done
1821Installing libqalculate-0.9.7_2...Installing cln-1.3.2... done
1822 done
1823Installing libpci-3.2.0... done
1824Installing gpsd-3.9... done
1825===> Creating users and/or groups.
1826Creating group 'kdm' with gid '147'.
1827Creating user 'kdm' with uid '147'.
1828 done
1829Installing kde-runtime-4.10.5...Installing libssh-0.5.2_1... done
1830Installing openslp-1.2.1_3... done
1831Installing cagibi-0.2.0... done
1832 done
1833Installing kde-baseapps-4.10.5...Installing tidy-lib-090315.c_1... done
1834Installing nepomuk-widgets-4.10.5... done
1835 done
1836Installing kde4-style-qtcurve-1.8.14... done
1837Installing kde4-windeco-nitrogen-3.3.3_4... done
1838Installing gtk-qt-engine-1.1_9... done
1839Installing ktimer-4.10.5... done
1840Installing neon29-0.29.6_4... done
1841Installing py27-qt4-xmlpatterns-4.10.2... done
1842Installing sweeper-4.10.5... done
1843Installing lineakd-0.9_2... done
1844Installing kfloppy-4.10.5... done
1845Installing kdf-4.10.5... done
1846Installing kdeadmin-4.10.5... done
1847Installing k3b-2.0.2_12...Installing ffmpeg-0.7.15,1... done
1848Installing musepack-2009.03.01_1... done
1849Installing libmusicbrainz-5.0.1... done
1850Installing libkcddb-4.10.5... done
1851 done
1852Installing filelight-4.10.5... done
1853Installing qca-ossl-2.0.0.b3_4... done
1854Installing kwallet-4.10.5... done
1855Installing kgpg-4.10.5... done
1856Installing print-manager-4.10.5... done
1857Installing qoauth-1.0.1... done
1858Installing py27-qt4-multimedia-4.10.2... done
1859Installing py27-qt4-doc-4.10.2,1... done
1860Installing py27-qt4-demo-4.10.2,1... done
1861Installing kdeutils-4.10.5...Installing kcalc-4.10.5... done
1862Installing libftdi-0.20... done
1863Installing superkaramba-4.10.5... done
1864Installing kcharselect-4.10.5... done
1865Installing lirc-0.9.0_4,1... done
1866Installing kremotecontrol-4.10.5... done
1867Installing ark-4.10.5... done
1868 done
1869Installing djbfft-0.76_2... done
1870Installing libkipi-4.10.5... done
1871Installing libkexiv2-4.10.5... done
1872Installing ksnapshot-4.10.5... done
1873Installing ruby19-krossruby-4.10.5... done
1874Installing qt4-libQtAssistantClient-4.6.3_1... done
1875Installing py27-qt4-test-4.10.2,1... done
1876Installing py27-qt4-scripttools-4.10.2,1... done
1877Installing py27-qt4-qscintilla2-2.7.2,1... done
1878Installing py27-qt4-help-4.10.2... done
1879Installing py27-qt4-designerplugin-4.10.2_1,1... done
1880Installing py27-qt4-dbus-4.10.2,1... done
1881Installing py27-qt4-assistant-4.10.2,1... done
1882Installing py27-qt4-4.10.2... done
1883Installing py27-pykdeuic4-4.10.5... done
1884Installing py27-krosspython-4.10.5... done
1885Installing p5-perlqt-4.10.5... done
1886Installing p5-perlkde-4.10.5... done
1887Installing kdebindings-4.10.5... done
1888Installing plasma-applet-simpleweatherforecast-1.3_4... done
1889Installing plasma-applet-panelspacer-0.2_8... done
1890Installing plasma-applet-daisy-0.0.4.26... done
1891Installing kdeplasma-addons-4.10.5...Installing marble-4.10.5... done
1892 done
1893Installing virtuoso-6.1.6_1...===> Creating users and/or groups.
1894Creating group 'virtuoso' with gid '79'.
1895Creating user 'virtuoso' with uid '79'.
1896 done
1897 done
1898======================================================================
1899
1900You'll have to install databases/virtuoso to use Soprano's Virtuoso
1901backend.
1902
1903======================================================================
1904======================================================================
1905
1906Due to severe instability, the Solid UPnP backend was disabled. Thus,
1907you will not get notifications about networked shares in the device
1908notifier. The UPnP functionality can be re-enabled by setting the
1909SOLID_UPNP environment variable:
1910
1911$ cat > ~/.kde4/env/upnp.sh << EOF
1912SOLID_UPNP=1
1913export SOLID_UPNP
1914EOF
1915$ chmod +x ~/.kde4/env/upnp.sh
1916
1917======================================================================
1918
1919You can use sasldb2 for authentication, to add users use:
1920
1921        saslpasswd2 -c username
1922
1923If you want to enable SMTP AUTH with the system Sendmail, read
1924Sendmail.README
1925
1926NOTE: This port has been compiled with a default pwcheck_method of
1927      auxprop.  If you want to authenticate your user by /etc/passwd,
1928      PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and
1929      set sasl_pwcheck_method to saslauthd after installing the
1930      Cyrus-IMAPd 2.X port.  You should also check the
1931      /usr/local/lib/sasl2/*.conf files for the correct
1932      pwcheck_method.
1933You have built the Boost library with thread support.
1934
1935Don't forget to add -pthread to your linker options when
1936linking your code.
1937************************************************************************
1938
1939Remember to run mysql_upgrade the first time you start the MySQL server
1940after an upgrade from an earlier version.
1941
1942************************************************************************
1943===========================================================
1944
1945To use Ruby bindings outside KDE session set RUBYLIB
1946environment variable:
1947
1948RUBYLIB=/usr/local/lib/ruby/site_ruby/1.9:/usr/local/lib/ruby/site_ruby/1.9/amd64-freebsd9
1949
1950See "man 1 ruby" for details.
1951
1952===========================================================
1953======================================================================
1954
1955To enable KDE Display Manager (KDM), add kdm4_enable="YES" to
1956rc.conf(5). To get full functionality you also need procfs(5) mounted.
1957
1958If sysutils/upower is installed, backlight management support requires
1959acpi_video(4) to be loaded.
1960
1961======================================================================
1962Make sure that your floppy disk is not mounted. KFloppy cannot format
1963a mounted floppy disk.
1964Notes for FreeBSD 7.x and onwards users:
19651. The FreeBSD k3b port supports SCSI drives only. If you have IDE CD or DVD
1966   drives, use them through the cam system. See Chapter 18.6.9 of the handbook
1967   (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html#ATAPICAM)
19682. k3b has to be started from a root console, which is not recommended.
1969   Alternatively, do ALL of the following:
1970   a. Set the suid flag on cdrecord and cdrdao. The 'Notes' chapter of
1971      'man cdrecord' discusses this.
1972   b. Set the vfs.usermount sysctl variable to 1.
1973        # sysctl vfs.usermount=1
1974      Add the line vfs.usermount=1 to /etc/sysctl.conf
1975      Note that this has negative security implications
1976   c. Every user must have read and write access to /dev/cdX:
1977      - add to your /etc/devfs.rules under '[system=10]':
1978          add path 'cd*' mode 666
1979      - or if you prefer allow access for a group XXX only add instead:
1980          add path 'cd*' mode 660 group XXX
1981      - to enable it, add to your /etc/rc.conf a
1982          devfs_system_ruleset="system"
1983   d. Every user who should be able to use k3b must have read and write access
1984      to all pass through devices connected with CD and DVD drives and to the
1985      /dev/xpt0 device. Run 'camcontrol devlist' to identify those devices (seek
1986      string 'passX' at the end of each line). Note, that this is a security
1987      leak as well but that there is no alternative!
1988      - add to your /etc/devfs.rules under '[system=10]':
1989          add path 'pass*' mode 666
1990          add path 'xpt0' mode 666
1991      - or if you prefer allow access for a group XXX only add instead:
1992          add path 'pass*' mode 660 group XXX
1993          add path 'xpt0' mode 660 group XXX
1994      - to enable it, add to your /etc/rc.conf
1995          devfs_system_ruleset="system"
1996      - to apply these changes without reboot, run as root:
1997          /etc/rc.d/devfs restart
19983. Check, that DMA is activated for atapi devices: 'sysctl hw.ata.atapi_dma'
1999   If not, set it to 1 and put 'hw.ata.atapi_dma=1' into /boot/loader.conf.
20004. Create a directory on a partition, which has enough disk space to hold a CDs
2001   or DVDs content (usually below /usr). Enter this directory in Settings->
2002   Configure K3b...->Misc.
2003**********************************************************************
2004This port does not contain any FreeBSD device drivers for infrared
2005devices. This port installs the LIRC daemons and tools for interacting
2006with drivers that support the LIRC device interface.
2007
2008You will need to obtain third party device drivers or port the Linux
2009drivers in ${WRKSRC}/drivers to use the LIRC port.
2010
2011Update for 0.9:  Known working with this update are FTDI-based USB
2012IR receivers/transmitters like described here,
2013
2014        http://www.huitsing.nl/irftdi/
2015
2016and if you use the recent multimedia/webcamd port then MCE USB based
2017ones driven by the Linux mceusb driver as well remotes coming with
2018USB DVB tuners that by default work with the Linux drivers used in
2019webcamd should also work, i.e. if webcamd creates a /dev/lircX
2020device node check if e.g.
2021
2022        mode2 -d /dev/lirc0
2023
2024reports pulses and spaces when triggering the remote at the receiver,
2025if it does you probably will be able to use lirc.
2026
2027Some other userland drivers will probably also work (like others
2028using libusb), they just were not tested.
2029
2030The lirc documentation should be accessible at:
2031
2032        /usr/local/share/doc/lirc/html/index.html
2033
2034Some example configs should have been installed here:
2035
2036        /usr/local/share/examples/lirc/remotes
2037
2038The port now installs an example lircd.conf that's preconfigured
2039for use with webcamd, either with USB DVB tuner remotes supported
2040by the Linux drivers by default that webcamd uses, or for remotes
2041supplied with MCE USB IR receivers.  If you want to create a config
2042for a different remote using an IR receiver that works with mode2
2043you can try using irrecord like described here:
2044
2045        file:///usr/local/share/doc/lirc/html/help.html#new_remote
2046
2047Update for webcamd >= 3.0.0.1:
2048
2049webcamd 3.0.0.1 now supports /dev/input/eventX (X there can be for
2050example 0, 8, 16 etc) and uses it exclusively for almost all tuners,
2051only mceusb IR-only devices now support both interfaces.  So if you
2052don't get a /dev/lircX device node anymore and want to make lirc
2053use a remote with such a tuner you now need the lirc devinput driver,
2054if you start lircd via the rc.d script set lircd_flags and lircd_device
2055in rc.conf(5), like:
2056
2057        lircd_flags="-H devinput"
2058        lircd_device="/dev/input/event0"
2059
2060The example lircd.conf includes the devinput config file too so if
2061all goes well irw(1) should still work with such tuners and show
2062buttons pressed, and if not and the tuner's Linux driver uses the
2063rc.core interface you can often still add a custom keymap, only
2064with devinput you no longer want to use irrecord(1) but ir-keytable(1)
2065which is part of the multimedia/v4l-utils port.  Using that tool
2066you can e.g. check remote events coming in on /dev/input/eventX,
2067
2068        ir-keytable -d /dev/input/eventX -t
2069
2070list the current keytable,
2071
2072        ir-keytable -d /dev/input/eventX -r
2073
2074or add scancodes on the fly by loading a custom keymap,
2075
2076        ir-keytable -d /dev/input/eventX -w keymap.txt
2077
2078(on Linux this can be automated using udev, don't know if we need
2079something like that also...)  Some (Linux-centric, so not all of
2080them apply) notes re ir-keytable(1) and the lirc devinput change
2081are also here:
2082
2083        http://forum.xbmc.org/showthread.php?t=101151
2084
2085**********************************************************************
2086===========================================================
2087
2088To use Perl bindings outside KDE session set PERL5LIB
2089environment variable:
2090
2091PERL5LIB=/usr/local/lib/perl5/site_perl/5.14/mach: /usr/local/lib/perl5/site_perl/5.14
2092
2093See "man 1 perlrun" for details.
2094
2095===========================================================
2096Running chroot command: pkg info -e pcbsd-meta-kde-accessibility-1366133527.txz
2097Installing package: pcbsd-meta-kde-accessibility-1366133527.txz
2098Installing pcbsd-meta-kde-accessibility-1366133527...Installing dotconf-1.3... done
2099Installing portaudio-18.1_3... done
2100Installing nas-1.9.3... done
2101Installing flite-1.4... done
2102Installing festvox-rab16-1.4.1_2...Installing festlex-poslex-1.4.1_2... done
2103Installing festlex-oald-1.4.1_1...Installing festival-1.96_3... done
2104 done
2105 done
2106Installing festvox-ked16-1.4.0_1...Installing festlex-cmu-1.95... done
2107 done
2108Installing festvox-kal16-1.4.0... done
2109Installing festvox-el11-1.4.0_2... done
2110Installing festvox-don-1.4.0_2... done
2111Installing festvox-czech-0.1...Installing festlex-czech-0.2.1... done
2112 done
2113Installing espeak-1.47.11... done
2114Installing speech-dispatcher-0.7.1_3... done
2115Installing kmouth-4.10.5... done
2116Installing kmousetool-4.10.5... done
2117Installing kmag-4.10.5... done
2118Installing kdeaccessibility-4.10.5...Installing kaccessible-4.10.5... done
2119Installing jovie-4.10.5... done
2120 done
2121 done
2122**************************************************
2123**************************************************
2124NOTE:
2125
2126Be sure to create a /usr/local/etc/nasd.conf file; use
2127/usr/local/etc/nasd.conf.eg as a starting point.
2128It should work fine as is.
2129
2130**************************************************
2131**************************************************
2132**************************************************************************
2133* You need to install at least one festvox-* package before festival can *
2134* do anything other than mumble silently to itself.  See the festival    *
2135* package description, the festdoc package (share/doc/festival/*),       *
2136* or the festival home page for more information.                        *
2137**************************************************************************
2138======================================================================
2139
2140To enable text-to-speech system, you first need to start
2141speech-dispatcher and Jovie (locally):
2142
2143$ speech-dispatcher
2144$ jovie
2145
2146You may want to launch them via the KDE autostart module.
2147
2148======================================================================
2149Running chroot command: pkg info -e pcbsd-meta-kde-artwork-1366133527.txz
2150Installing package: pcbsd-meta-kde-artwork-1366133527.txz
2151Installing pcbsd-meta-kde-artwork-1366133527...Installing kdeartwork-4.10.5... done
2152Installing kde4-style-skulpture-0.2.3_6... done
2153Installing kde4-style-polyester-2.0.0_6... done
2154Installing kde4-style-nitrogen-1.0.5_4... done
2155 done
2156Running chroot command: pkg info -e pcbsd-meta-kde-graphics-1366133527.txz
2157Installing package: pcbsd-meta-kde-graphics-1366133527.txz
2158Installing pcbsd-meta-kde-graphics-1366133527...Installing kgamma-4.10.5... done
2159Installing wxgtk2-unicode-2.8.12_2...Installing wxgtk2-common-2.8.12_2...Installing pangox-compat-0.0.2... done
2160Installing libmspack-0.3... done
2161 done
2162 done
2163Installing sg3_utils-1.36... done
2164Installing hdf5-1.8.9... done
2165Installing libmediawiki-3.2.0... done
2166Installing libkvkontakte-3.2.0... done
2167Installing gstreamer-qt4-0.10.2_2... done
2168Installing gsl-1.15_1... done
2169Installing fftw3-float-3.3.3_1... done
2170Installing openjdk6-b27_6...Installing javavmwrapper-2.4_3... done
2171Installing java-zoneinfo-2013.d... done
2172 done
2173Installing vigra-1.9.0_2... done
2174Installing skanlite-1.0...Installing libksane-4.10.5... done
2175 done
2176Installing plotutils-2.6_3,1... done
2177Installing panomatic-0.9.4... done
2178Installing p5-Image-ExifTool-9.04... done
2179Installing opencv-2.3.1_7... done
2180Installing libpgf-6.12.24... done
2181Installing libpano13-2.9.18_1... done
2182Installing libkipiplugins-3.2.0...Installing libkdcraw-4.10.5... done
2183 done
2184Installing libkface-3.2.0... done
2185Installing libgphoto2-2.4.14_3...Installing libexif-0.6.21... done
2186 done
2187Installing lensfun-0.2.7... done
2188Installing ksaneplugin-4.10.5... done
2189Installing kphotoalbum-4.4... done
2190Installing kolourpaint-4.10.5... done
2191Installing kipi-plugins-3.2.0,1...Installing kipi-plugin-yandexfotki-3.2.0... done
2192Installing kipi-plugin-vkontakte-3.2.0... done
2193Installing kipi-plugin-videoslideshow-3.2.0... done
2194Installing kipi-plugin-timeadjust-3.2.0... done
2195Installing kipi-plugin-smug-3.2.0... done
2196Installing kipi-plugin-shwup-3.2.0... done
2197Installing kipi-plugin-sendimages-3.2.0... done
2198Installing kipi-plugin-removeredeyes-3.2.0... done
2199Installing kipi-plugin-rawconverter-3.2.0... done
2200Installing kipi-plugin-rajceexport-3.2.0... done
2201Installing kipi-plugin-printimages-3.2.0... done
2202Installing kipi-plugin-piwigoexport-3.2.0... done
2203Installing kipi-plugin-picasawebexport-3.2.0... done
2204Installing kipi-plugin-photolayoutseditor-3.2.0... done
2205Installing kipi-plugin-panorama-3.2.0... done
2206Installing kipi-plugin-metadataedit-3.2.0... done
2207Installing kipi-plugin-mediawiki-3.2.0... done
2208Installing kipi-plugin-kopete-3.2.0... done
2209Installing kipi-plugin-kmlexport-3.2.0... done
2210Installing kipi-plugin-kioexport-3.2.0... done
2211Installing kipi-plugin-jpeglossless-3.2.0... done
2212Installing kipi-plugin-ipodexport-3.2.0...Installing libplist-1.10... done
2213Installing usbmuxd-1.0.8... done
2214Installing libimobiledevice-1.1.5... done
2215Installing libgpod-0.8.2_2... done
2216 done
2217Installing kipi-plugin-imgurexport-3.2.0... done
2218Installing kipi-plugin-imageviewer-3.2.0... done
2219Installing kipi-plugin-imageshackexport-3.2.0... done
2220Installing kipi-plugin-htmlexport-3.2.0... done
2221Installing kipi-plugin-gpssync-3.2.0...Installing libkgeomap-3.2.0... done
2222 done
2223Installing kipi-plugin-galleryexport-3.2.0... done
2224Installing kipi-plugin-flickrexport-3.2.0... done
2225Installing kipi-plugin-flashexport-3.2.0... done
2226Installing kipi-plugin-facebook-3.2.0... done
2227Installing kipi-plugin-expoblending-3.2.0... done
2228Installing kipi-plugin-dngconverter-3.2.0... done
2229Installing kipi-plugin-debianscreenshots-3.2.0... done
2230Installing kipi-plugin-calendar-3.2.0... done
2231Installing kipi-plugin-batchprocess-3.2.0... done
2232Installing kipi-plugin-advancedslideshow-3.2.0... done
2233Installing kipi-plugin-acquireimages-3.2.0... done
2234Installing digikam-l10n-3.2.0... done
2235Installing digikam-doc-3.2.0... done
2236 done
2237Installing kiconedit-4.4.0_2... done
2238Installing kdegraphics-thumbnailers-4.10.5... done
2239Installing kdegraphics-svgpart-4.10.5... done
2240Installing kdegraphics-strigi-analyzer-4.10.5... done
2241Installing kdegraphics-mobipocket-4.10.5... done
2242Installing kdegraphics-4.10.5...Installing kcolorchooser-4.10.5... done
2243Installing kamera-4.10.5... done
2244Installing gwenview-4.10.5... done
2245Installing kruler-4.10.5... done
2246 done
2247Installing kcoloredit-2.0.0.4.4.0_2... done
2248Installing hugin-2012.0.0...Installing glew-1.10.0... done
2249Installing enblend-4.1.1... done
2250Installing autopano-sift-C-2.5.1_3... done
2251Installing gmake-3.82_1... done
2252 done
2253Installing digikam-3.2.0_1,1... done
2254 done
2255======================================================================
2256
2257This OpenJDK implementation requires fdescfs(5) mounted on /dev/fd and
2258procfs(5) mounted on /proc.
2259
2260If you have not done it yet, please do the following:
2261
2262        mount -t fdescfs fdesc /dev/fd
2263        mount -t procfs proc /proc
2264
2265To make it permanent, you need the following lines in /etc/fstab:
2266
2267        fdesc   /dev/fd         fdescfs         rw      0       0
2268        proc    /proc           procfs          rw      0       0
2269
2270======================================================================
2271Running chroot command: pkg info -e pcbsd-meta-kde-multimedia-1366133527.txz
2272Installing package: pcbsd-meta-kde-multimedia-1366133527.txz
2273Installing pcbsd-meta-kde-multimedia-1366133527...Installing kio-upnp-ms-1.0.0.g20110808_2... done
2274Installing loudmouth-1.4.3_7... done
2275Installing kdemultimedia-ffmpegthumbs-4.10.5... done
2276Installing kdemultimedia-4.10.5...Installing dragon-4.10.5... done
2277Installing libmusicbrainz-3.0.3_2...Installing libdiscid-0.2.2_1... done
2278 done
2279Installing libkcompactdisc-4.10.5... done
2280Installing kscd-4.10.5... done
2281Installing kmix-4.10.5... done
2282Installing kio-audiocd-4.10.5... done
2283Installing juk-4.10.5... done
2284 done
2285Installing qtscriptgenerator-0.2.0_1... done
2286Installing taglib-extras-1.0.1... done
2287Installing libofa-0.9.3_8... done
2288Installing libmtp-1.1.6_1... done
2289Installing liblastfm-1.0.6... done
2290Installing amarok-2.7.0_2... done
2291 done
2292======================================================================
2293
2294To be able to play audio and video streams with Phonon-GStreamer,
2295you'll need to have the appropriate GStreamer plugins installed.
2296multimedia/gstreamer-plugins-core will install a standard set, while
2297multimedia/gstreamer-plugins-all will let you choose among all of
2298them.
2299
2300======================================================================
2301======================================================================
2302
2303In order to use certain devices (MTP, iPod...) with Amarok you need to
2304be able to mount USB devices as the user running Amarok. If HAL
2305automount doesn't work, read more on how to set this up on FreeBSD
2306here:
2307http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/usb-disks.html
2308
2309If you are not running a full KDE workspace, you should consider
2310installing a Phonon backend (multimedia/phonon-gstreamer or
2311multimedia/phonon-vlc) to get audio playback.
2312
2313======================================================================
2314Running chroot command: pkg info -e pcbsd-meta-kde-network-1366133527.txz
2315Installing package: pcbsd-meta-kde-network-1366133527.txz
2316Installing pcbsd-meta-kde-network-1366133527...Installing p5-XML-SAX-Base-1.08... done
2317Installing p5-XML-SAX-0.99...Installing p5-XML-NamespaceSupport-1.11... done
2318 done
2319Installing p5-XML-LibXML-2.0018,1... done
2320Installing libotr-3.2.1_1... done
2321Installing pl-libgadu-1.11.2,1... done
2322Installing linphone-base-3.2.1_2,1...Installing libosip-3.6.0... done
2323Installing libeXosip2-3.6.0... done
2324Installing gsm-1.0.13... done
2325 done
2326Installing libmms-0.6.2... done
2327Installing krfb-4.10.5...Installing telepathy-qt4-0.9.3...Installing telepathy-glib-0.20.2...Installing vala-vapigen-0.20.1...Installing vala-0.20.1... done
2328 done
2329 done
2330Installing telepathy-farsight-0.0.19...Installing libnice-0.1.3... done
2331Installing farsight2-0.0.31...Installing py27-gstreamer-0.10.22_1... done
2332 done
2333 done
2334 done
2335 done
2336Installing krdc-4.10.5... done
2337Installing kdenetwork-4.10.5...Installing ilbc-r3951... done
2338Installing libktorrent-1.3.1_2... done
2339Installing meanwhile-1.0.2_3... done
2340Installing libmsn-4.2.1... done
2341Installing kopete-4.10.5...Installing msilbc-2.0.3... done
2342 done
2343 done
2344Installing ktorrent-4.3.1_1... done
2345Installing konversation-1.4_2... done
2346 done
2347Running chroot command: pkg info -e pcbsd-meta-kde-pim-1366133527.txz
2348Installing package: pcbsd-meta-kde-pim-1366133527.txz
2349Installing pcbsd-meta-kde-pim-1366133527...Installing xerces-c3-3.1.1_1... done
2350Installing libkolabxml-0.8.4_1... done
2351Installing libkolab-0.4.2... done
2352Installing libkgapi-0.4.4... done
2353Installing grantlee-0.3.0... done
2354Installing libgcal-0.9.6_1... done
2355Installing kdepim-runtime-4.10.5... done
2356Installing kdepim-4.10.5... done
2357Installing akonadi-googledata-1.2.0_2... done
2358 done
2359Running chroot command: pkg info -e pcbsd-meta-nvidia-1366133527.txz
2360Installing package: pcbsd-meta-nvidia-1366133527.txz
2361Installing pcbsd-meta-nvidia-1366133527...Installing nvidia-xconfig-310.14... done
2362Installing nvidia-settings-310.14... done
2363Installing nvidia-driver-319.32... done
2364 done
2365To use these drivers, make sure that you have loaded the NVidia kernel
2366module, by doing
2367
2368        # kldload nvidia
2369
2370or adding
2371
2372        nvidia_load="YES"
2373
2374to your /boot/loader.conf.
2375
2376If you build this port with FreeBSD AGP GART driver, make sure you have
2377agp.ko kernel module installed and loaded, since nvidia.ko will depend
2378on it, or have your kernel compiled with "device agp".  Otherwise, the
2379NVidia kernel module will not load.  Also, please set correct value for
2380``Option "NvAGP"'' in ``Device'' section of your X11 configuration file.
2381
2382When building with Linux compatibility support, make sure that linux.ko
2383module is available as well (or have it compiled in kernel).  It can be
2384loaded via /boot/loader.conf, or later in the boot process if you add
2385
2386        linux_enable="YES"
2387
2388to your /etc/rc.conf.
2389
2390If X.org cannot start and reports
2391
2392        (EE) NVIDIA(0): Failed to obtain a shared memory identifier.
2393
2394in /var/log/Xorg.0.log while actually you have ``options SYSVSHM''
2395enabled in kernel, the sysctl ``kern.ipc.shmall'' should be increased.
2396
2397See /usr/local/share/doc/NVIDIA_GLX-1.0/README for more information.
2398Package installation complete!
2399Cleaning up: /mnt/usr/.pkgtmp
2400Running: cd /dev
2401Running: umount /mnt/usr/.pkgtmp
2402Running: rmdir /mnt/usr/.pkgtmp
2403Running chroot command: /usr/bin/cap_mkdb /etc/login.conf
2404Setting re0 to DHCP on the system.
2405Setting nfe0 to DHCP on the system.
2406Setting ipfw0 to DHCP on the system.
2407Setting re0 to accepting RAs on the system.
2408Setting nfe0 to accepting RAs on the system.
2409Setting ipfw0 to accepting RAs on the system.
2410Running chroot command: ln -s /usr/home /home
2411Setting hostname: pcbsd-5423
2412Running external command: /root/save-config.sh
2413Running chroot command: sh /usr/local/share/pcbsd/scripts/sys-init.sh desktop en_US
2414Running chroot command: touch /var/.runxsetup
2415Running chroot command: touch /var/.pcbsd-firstboot
2416Running chroot command: touch /var/.pcbsd-firstgui
2417Running chroot command: newaliases
2418Running: mount -t devfs devfs /mnt/dev
2419Running: cp /root/beadm.install /mnt/root/beadm.install
2420Running: chmod 755 /mnt/root/beadm.install
2421Running: cp /boot/zfs/zpool.cache /mnt/boot/zfs/
2422Running: ln -s ../zfs /mnt/boot/kernel/zfs
2423Running: cp /etc/hostid /mnt/etc/hostid
2424Running: chroot /mnt grub-install --force /dev/ada0
2425Installation finished. No error reported.
2426Running: chroot /mnt grub-mkconfig -o /boot/grub/grub.cfg
2427Generating grub.cfg ...
2428Found theme: /boot/grub/themes/pcbsd/theme.txt
2429done
2430Running: rm /mnt/root/beadm.install
2431Running: umount /mnt/dev