Ticket #753: pcbsd-install-debug.log

File pcbsd-install-debug.log, 9.6 KB (added by ntamas, 21 months ago)

non-RC release 9.2, installer stops at 0%

2kern.geom.debugflags: 0 -> 16
3Deleting all gparts
4Running: gpart delete -i 1 /dev/ada0
5ada0s1 deleted
6Running: gpart destroy /dev/ada0
7ada0 destroyed
8Clearing gpt backup table location on disk
9Running: dd if=/dev/zero of=/dev/ada0 bs=1m count=1
101+0 records in
111+0 records out
121048576 bytes transferred in 0.007088 secs (147932947 bytes/sec)
13Running: dd if=/dev/zero of=/dev/ada0 bs=1m oseek=2859143
14dd: /dev/ada0: short write on character device
15dd: /dev/ada0: end of device
165+0 records in
174+1 records out
184252160 bytes transferred in 0.088221 secs (48199045 bytes/sec)
19Running: dd if=/dev/zero of=/dev/ada0 count=3000
203000+0 records in
213000+0 records out
221536000 bytes transferred in 0.344769 secs (4455157 bytes/sec)
23Running gpart on /dev/ada0
24Running: gpart create -s mbr -f active /dev/ada0
25ada0 created
26Running gpart add on /dev/ada0
27Running: gpart add -a 4k -t freebsd -i 1 /dev/ada0
28ada0s1 added, but partition is not aligned on 4096 bytes
29Cleaning up /dev/ada0s1
30Running: dd if=/dev/zero of=/dev/ada0s1 count=1024
311024+0 records in
321024+0 records out
33524288 bytes transferred in 0.132324 secs (3962154 bytes/sec)
34Running: gpart set -a active -i 1 /dev/ada0
35active set on ada0s1
36Running: gpart create -s BSD /dev/ada0s1
37ada0s1 created
38Running: gpart add -s 2857089M -a 512b -t freebsd-zfs -i 1 /dev/ada0s1
39gpart: autofill: No space left on device
40EXITERROR: Error 1: gpart add -s 2857089M -a 512b -t freebsd-zfs -i 1 /dev/ada0s1
43# Auto-Generated pc-sysinstall configuration
48distFiles=base doc games kernel lib32
56# Disk Setup for ada0
63# Partition Setup for ada0(ALL)
64# All sizes are expressed in MB
65# Avail FS Types, UFS, UFS+S, UFS+SUJ, UFS+J, ZFS, SWAP
66# UFS.eli, UFS+S.eli, UFS+SUJ, UFS+J.eli, ZFS.eli, SWAP.eli
67disk0-part=ZFS 2857089 /,/tmp(compress=lzjb),/usr(canmount=off),/usr/home,/usr/jails,/usr/obj(compress=lzjb),/usr/pbi,/usr/ports(compress=gzip),/usr/ports/distfiles(compress=off),/usr/src(compress=gzip),/var(canmount=off),/var/audit(compress=lzjb),/var/log(compress=gzip),/var/tmp(compress=lzjb)
68disk0-part=SWAP 2048 none
73installPackages=pcbsd-base pcbsd-meta-kde pcbsd-meta-kde-accessibility pcbsd-meta-kde-artwork pcbsd-meta-kde-graphics pcbsd-meta-kde-l10n pcbsd-meta-kde-multimedia pcbsd-meta-kde-network pcbsd-meta-kde-pim pcbsd-meta-nvidia
75runCommand=sh /usr/local/share/pcbsd/scripts/sys-init.sh desktop hu
76# Touch flags to enable PC-BSD setup at first boot
77runCommand=touch /var/.runxsetup
78runCommand=touch /var/.pcbsd-firstboot
79runCommand=touch /var/.pcbsd-firstgui
83Copyright (c) 1992-2013 The FreeBSD Project.
84Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
85        The Regents of the University of California. All rights reserved.
86FreeBSD is a registered trademark of The FreeBSD Foundation.
87FreeBSD 9.2-RELEASE-p9 #9 r+8a79a40: Fri Sep 27 12:32:02 EDT 2013
88    root@avenger:/usr/obj/pcbsd-build92/fbsd-source/src/sys/GENERIC amd64
89gcc version 4.2.1 20070831 patched [FreeBSD]
90CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2210.11-MHz K8-class CPU)
91  Origin = "AuthenticAMD"  Id = 0x60fb2  Family = 0xf  Model = 0x6b  Stepping = 2
93  Features2=0x2001<SSE3,CX16>
94  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
95  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
96real memory  = 2147483648 (2048 MB)
97avail memory = 2042064896 (1947 MB)
98Event timer "LAPIC" quality 400
100FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
101FreeBSD/SMP: 1 package(s) x 2 core(s)
102 cpu0 (BSP): APIC ID:  0
103 cpu1 (AP): APIC ID:  1
104ioapic0 <Version 1.1> irqs 0-23 on motherboard
105kbd1 at kbdmux0
106acpi0: <A_M_I OEMRSDT> on motherboard
107acpi0: Power Button (fixed)
108acpi0: reservation of 0, a0000 (3) failed
109acpi0: reservation of 100000, 7ff00000 (3) failed
110cpu0: <ACPI CPU> on acpi0
111cpu1: <ACPI CPU> on acpi0
112attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
113Timecounter "i8254" frequency 1193182 Hz quality 0
114Event timer "i8254" frequency 1193182 Hz quality 100
115atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
116Event timer "RTC" frequency 32768 Hz quality 0
117Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
118acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
119pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
120pci0: <ACPI PCI bus> on pcib0
121pci0: <memory, RAM> at device 0.0 (no driver attached)
122isab0: <PCI-ISA bridge> at device 1.0 on pci0
123isa0: <ISA bus> on isab0
124pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
125pci0: <memory, RAM> at device 1.2 (no driver attached)
126ohci0: <nVidia nForce MCP61 USB Controller> mem 0xdbfff000-0xdbffffff irq 21 at device 2.0 on pci0
127usbus0 on ohci0
128ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xdbffec00-0xdbffecff irq 22 at device 2.1 on pci0
129usbus1: EHCI version 1.0
130usbus1 on ehci0
131pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
132pci1: <ACPI PCI bus> on pcib1
133hdac0: <NVIDIA MCP61 HDA Controller> mem 0xdbff8000-0xdbffbfff irq 23 at device 5.0 on pci0
134atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
135ata0: <ATA channel> at channel 0 on atapci0
136ata1: <ATA channel> at channel 1 on atapci0
137nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xd480-0xd487 mem 0xdbffd000-0xdbffdfff irq 20 at device 7.0 on pci0
138miibus0: <MII bus> on nfe0
139rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
140rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
141nfe0: Ethernet address: 00:19:66:54:07:1c
142atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xe00-0xe07,0xe20-0xe23,0xe40-0xe47,0xe60-0xe63,0xc880-0xc88f mem 0xdbffc000-0xdbffcfff irq 21 at device 8.0 on pci0
143ata2: <ATA channel> at channel 0 on atapci1
144ata3: <ATA channel> at channel 1 on atapci1
145atapci2: <nVidia nForce MCP61 SATA300 controller> port 0xe80-0xe87,0xea0-0xea3,0xec0-0xec7,0xee0-0xee3,0xc000-0xc00f mem 0xdbff7000-0xdbff7fff irq 22 at device 8.1 on pci0
146ata4: <ATA channel> at channel 0 on atapci2
147ata5: <ATA channel> at channel 1 on atapci2
148pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
149pci2: <ACPI PCI bus> on pcib2
150vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xdf000000-0xdfffffff,0xc0000000-0xcfffffff,0xdc000000-0xddffffff irq 16 at device 0.0 on pci2
151pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
152pci3: <ACPI PCI bus> on pcib3
153pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
154pci4: <ACPI PCI bus> on pcib4
155acpi_button0: <Power Button> on acpi0
156atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
157atkbd0: <AT Keyboard> irq 1 on atkbdc0
158kbd0 at atkbd0
159atkbd0: [GIANT-LOCKED]
160sc0: <System console> at flags 0x100 on isa0
161sc0: VGA <16 virtual consoles, flags=0x300>
162vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
163ppc0: cannot reserve I/O port range
164powernow0: <PowerNow! K8> on cpu0
165powernow1: <PowerNow! K8> on cpu1
166Timecounters tick every 1.000 msec
167hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0
168hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
169pcm0: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
170pcm1: <Realtek ALC888 (Rear Digital)> at nid 30 on hdaa0
171usbus0: 12Mbps Full Speed USB v1.0
172usbus1: 480Mbps High Speed USB v2.0
173ugen0.1: <nVidia> at usbus0
174uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
175ugen1.1: <nVidia> at usbus1
176uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
177uhub0: 10 ports with 10 removable, self powered
178uhub1: 10 ports with 10 removable, self powered
179ugen0.2: <vendor 0x04d9> at usbus0
180ums0: <vendor 0x04d9 product 0x048e, class 0/0, rev 1.10/9.10, addr 2> on usbus0
181ums0: 5 buttons and [XYZ] coordinates ID=0
182ada0 at ata3 bus 0 scbus3 target 0 lun 0
183ada0: <WL3000GSA6454G 80.00A80> ATA-8 SATA 3.x device
184ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
185ada0: 2859147MB (5855533169 512 byte sectors: 16H 63S/T 16383C)
186ada0: Previously was known as ad6
187cd0 at ata0 bus 0 scbus0 target 0 lun 0
188cd0: <HL-DT-ST RW/DVD GCC-4482B 2.01> Removable CD-ROM SCSI-0 device
189cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
190cd0: cd present [1774208 x 2048 byte records]
191SMP: AP CPU #1 Launched!
192Trying to mount root from cd9660:/dev/iso9660/PCBSD_INSTALL [ro]...
193md0.uzip: 32826 x 65536 blocks
194cryptosoft0: <software crypto> on motherboard
195ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
196            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
197ZFS filesystem version: 5
198ZFS storage pool version: features support (5000)
199nvidia0: <GeForce 8600 GT> on vgapci0
200vgapci0: child nvidia0 requested pci_enable_io
201vgapci0: child nvidia0 requested pci_enable_io
202nfe0: link state changed to DOWN
203nfe0: link state changed to UP
205# DISK INFO ada0
208=>        63  4294967232  ada0  MBR  (2.7T)
209          63          63        - free -  (31k)
210         126  4294967103     1  freebsd  [active]  (2T)
211  4294967229          66        - free -  (33k)
215/dev/iso9660/PCBSD_INSTALL on / (cd9660, local, read-only)
216devfs on /dev (devfs, local, multilabel)
217/dev/md6 on /tmp (ufs, local)
218/dev/md2 on /memfs (ufs, local)
219/dev/md0.uzip on /usr (ufs, local, read-only)
220/dev/md10 on /etc (ufs, local)
221/dev/md9 on /var (ufs, local)
222/dev/md8 on /root (ufs, local)