Ticket #772: pcbsd-install-debug.log

File pcbsd-install-debug.log, 119.8 KB (added by sjn1ripe@…, 12 months ago)

System report from install process

Line 
1# PC-SYSINSTALL LOG
2kern.geom.debugflags: 0 -> 16
3Running gpart modify on /dev/ada0
4Running: gpart modify -t freebsd -i 3 /dev/ada0
5ada0s3 modified
6Cleaning up /dev/ada0s3
7Running: dd if=/dev/zero of=/dev/ada0s3 count=1024
81024+0 records in
91024+0 records out
10524288 bytes transferred in 0.140227 secs (3738856 bytes/sec)
11Running: gpart create -s BSD /dev/ada0s3
12ada0s3 created
13Running: gpart add -s 188407M -a 512b -t freebsd-zfs -i 1 /dev/ada0s3
14ada0s3a added
15Running: gpart add -s 16385M  -t freebsd-swap -i 2 /dev/ada0s3
16ada0s3b added
17Running: gpart bootcode -b /boot/boot /dev/ada0s3
18bootcode written to ada0s3
19NEWFS: /dev/ada0s3a - ZFS
20Setting up ZFS boot loader support
21Running: dd if=/boot/zfsboot of=/dev/ada0s3 count=1
221+0 records in
231+0 records out
24512 bytes transferred in 0.666466 secs (768 bytes/sec)
25Running: dd if=/boot/zfsboot of=/dev/ada0s3a skip=1 seek=1024
26128+0 records in
27128+0 records out
2865536 bytes transferred in 0.015648 secs (4188105 bytes/sec)
29Creating zpool tank on /dev/ada0s3a
30Running: zpool create -m none -f tank /dev/ada0s3a
31Running: sync
32Running: glabel label swap0 /dev/ada0s3b
33Running: sync
34zfs create  -p tank/ROOT
35Running: zfs create  -p tank/ROOT
36zfs create  -p tank/ROOT/default
37Running: zfs create  -p tank/ROOT/default
38Running: zfs set mountpoint=/mnt tank/ROOT/default
39Stamping tank/ROOT/default as bootfs
40Running: zpool set bootfs=tank/ROOT/default tank
41zfs create  -p tank/tmp
42Running: zfs create  -p tank/tmp
43Running: zfs set mountpoint=/mnt/tmp tank/tmp
44Running: zfs set compress=lzjb tank/tmp
45zfs create  -p tank/usr
46Running: zfs create  -p tank/usr
47Running: zfs set mountpoint=/mnt/usr tank/usr
48Running: zfs set canmount=off tank/usr
49zfs create  -p tank/usr/home
50Running: zfs create  -p tank/usr/home
51Running: zfs set mountpoint=/mnt/usr/home tank/usr/home
52zfs create  -p tank/usr/jails
53Running: zfs create  -p tank/usr/jails
54Running: zfs set mountpoint=/mnt/usr/jails tank/usr/jails
55zfs create  -p tank/usr/obj
56Running: zfs create  -p tank/usr/obj
57Running: zfs set mountpoint=/mnt/usr/obj tank/usr/obj
58Running: zfs set compress=lzjb tank/usr/obj
59zfs create  -p tank/usr/pbi
60Running: zfs create  -p tank/usr/pbi
61Running: zfs set mountpoint=/mnt/usr/pbi tank/usr/pbi
62zfs create  -p tank/usr/ports
63Running: zfs create  -p tank/usr/ports
64Running: zfs set mountpoint=/mnt/usr/ports tank/usr/ports
65Running: zfs set compress=gzip tank/usr/ports
66zfs create  -p tank/usr/ports/distfiles
67Running: zfs create  -p tank/usr/ports/distfiles
68Running: zfs set mountpoint=/mnt/usr/ports/distfiles tank/usr/ports/distfiles
69Running: zfs set compress=off tank/usr/ports/distfiles
70zfs create  -p tank/usr/src
71Running: zfs create  -p tank/usr/src
72Running: zfs set mountpoint=/mnt/usr/src tank/usr/src
73Running: zfs set compress=gzip tank/usr/src
74zfs create  -p tank/var
75Running: zfs create  -p tank/var
76Running: zfs set mountpoint=/mnt/var tank/var
77Running: zfs set canmount=off tank/var
78zfs create  -p tank/var/audit
79Running: zfs create  -p tank/var/audit
80Running: zfs set mountpoint=/mnt/var/audit tank/var/audit
81Running: zfs set compress=lzjb tank/var/audit
82zfs create  -p tank/var/log
83Running: zfs create  -p tank/var/log
84Running: zfs set mountpoint=/mnt/var/log tank/var/log
85Running: zfs set compress=gzip tank/var/log
86zfs create  -p tank/var/tmp
87Running: zfs create  -p tank/var/tmp
88Running: zfs set mountpoint=/mnt/var/tmp tank/var/tmp
89Running: zfs set compress=lzjb tank/var/tmp
90swapon /dev/ada0s3b
91Running: swapon /dev/ada0s3b
92pc-sysinstall: Starting Extraction (base)
93pc-sysinstall: Starting Extraction (doc)
94pc-sysinstall: Starting Extraction (games)
95pc-sysinstall: Starting Extraction (kernel)
96pc-sysinstall: Starting Extraction (lib32)
97pc-sysinstall: Extraction Finished
98Running: mkdir -p /mnt/usr/.pkgtmp
99Running: mount_nullfs /dist/packages /mnt/usr/.pkgtmp
100Running: cd /mnt/usr/.pkgtmp/All
101Packages to install: 10
102Running chroot command: which pkg-static
103Bootstraping pkgng..
104Running: pkg -c /mnt add /usr/.pkgtmp/Latest/pkg.txz
105Installing pkg-1.1.4_1... done
106If you are upgrading from the old package format, first run:
107
108  # pkg2ng
109Running chroot command: pkg info -e pcbsd-base-1378408836.txz
110Installing package: pcbsd-base-1378408836.txz
111Installing pcbsd-base-1378408836...Installing zenity-2.32.1_2...Installing xproto-7.0.24... done
112Installing xineramaproto-1.2.1... done
113Installing xextproto-7.2.1... done
114Installing xcb-util-renderutil-0.3.8...Installing xcb-util-0.3.9_1,1...Installing libxcb-1.9.1...Installing libXdmcp-1.1.1... done
115Installing libXau-1.0.8... done
116Installing libxml2-2.8.0_2...Installing libiconv-1.14_1... done
117Installing pkgconf-0.9.2_1... done
118 done
119Installing libpthread-stubs-0.3_3... done
120 done
121 done
122 done
123Installing renderproto-0.11.1... done
124Installing randrproto-1.4.0... done
125Installing pixman-0.30.0... done
126Installing libXrender-0.9.8...Installing libX11-1.6.1,1...Installing kbproto-1.0.6... done
127 done
128 done
129Installing libXrandr-1.4.1...Installing libXext-1.3.2,1... done
130 done
131Installing libXinerama-1.1.3,1... done
132Installing libXi-1.7.2,1...Installing libXfixes-5.0.1...Installing fixesproto-5.0... done
133 done
134Installing inputproto-2.3... done
135 done
136Installing libXdamage-1.1.4...Installing damageproto-1.2.1... done
137 done
138Installing libXcursor-1.1.14... done
139Installing libXcomposite-0.4.4,1...Installing compositeproto-0.4.2... done
140 done
141Installing libSM-1.2.1,1...Installing libICE-1.0.8,1... done
142 done
143Installing pango-1.34.1_1...Installing xorg-fonts-truetype-7.7_1...Installing mkfontscale-1.1.1...Installing libfontenc-1.1.2... done
144Installing freetype2-2.4.12_1... done
145 done
146Installing mkfontdir-1.0.7... done
147Installing fontconfig-2.10.93,1...Installing expat-2.1.0... done
148Running fc-cache to build fontconfig cache...
149/usr/local/share/fonts: skipping, no such directory
150/usr/local/lib/X11/fonts: caching, new cache contents: 0 fonts, 1 dirs
151/usr/local/lib/X11/fonts/local: caching, new cache contents: 0 fonts, 0 dirs
152/root/.local/share/fonts: skipping, no such directory
153/root/.fonts: skipping, no such directory
154/var/db/fontconfig: cleaning cache directory
155/root/.cache/fontconfig: not cleaning non-existent cache directory
156/root/.fontconfig: not cleaning non-existent cache directory
157fc-cache: succeeded
158 done
159Installing font-util-1.3.0... done
160Installing font-misc-meltho-1.0.3... done
161Installing font-misc-ethiopic-1.0.3... done
162Installing font-bh-ttf-1.0.3... done
163Installing encodings-1.0.4,1... done
164Installing dejavu-2.33... done
165 done
166Installing libXft-2.3.1... done
167Installing harfbuzz-0.9.19...Installing python27-2.7.5_2...Installing gettext-0.18.3... done
168 done
169Installing python2-2... done
170Installing python-2.7,2... done
171Installing perl-5.14.4...Removing stale symlinks from /usr/bin...
172    Skipping /usr/bin/perl
173    Skipping /usr/bin/perl5
174Done.
175Creating various symlinks in /usr/bin...
176    Symlinking /usr/local/bin/perl5.14.4 to /usr/bin/perl
177    Symlinking /usr/local/bin/perl5.14.4 to /usr/bin/perl5
178Done.
179Cleaning up /etc/make.conf... Done.
180Spamming /etc/make.conf... Done.
181 done
182Installing png-1.5.17... done
183Installing graphite2-1.2.3... done
184Installing cairo-1.10.2_5,2...Installing pcre-8.33... done
185Installing libffi-3.0.13... done
186Installing glib-2.36.3...No schema files found: doing nothing.
187 done
188 done
189Installing icu-50.1.2... done
190 done
191Installing gnomehier-3.0... done
192 done
193Installing libXt-1.1.4,1... done
194Installing gtk-2.24.19_2...Installing cups-client-1.5.4_1... done
195Installing shared-mime-info-1.1... done
196Installing hicolor-icon-theme-0.12... done
197Installing tiff-4.0.3...Installing jbigkit-1.6... done
198Installing jpeg-8_4... done
199 done
200Installing jasper-1.900.1_12... done
201Installing gtk-update-icon-cache-2.24.19...Installing gdk-pixbuf2-2.28.2... done
202Installing atk-2.8.0... done
203 done
204 done
205Installing xmlcharent-0.3_2...Installing xmlcatmgr-2.2... + Creating /usr/local/share/sgml/catalog
206 + Registering CATALOG catalog.ports (SGML)
207 + Creating /usr/local/share/sgml/catalog.ports
208 + Creating /usr/local/share/xml/catalog
209 + Registering nextCatalog catalog.ports (XML)
210 + Creating /usr/local/share/xml/catalog.ports
211 done
212 done
213Installing rarian-0.8.1...Installing libxslt-1.1.28_1...Installing libgpg-error-1.12... done
214Installing libgcrypt-1.5.3... done
215 done
216Installing iso8879-1986_3... done
217Installing docbook-xsl-1.76.1_1...Installing docbook-xml-4.5... done
218Installing docbook-xml-4.4_1... done
219Installing docbook-xml-4.3... done
220Installing docbook-xml-4.2_1... done
221Installing docbook-sk-4.1.2_4... done
222Installing docbook-5.0_1... done
223Installing docbook-4.5_2... done
224Installing docbook-4.4_2... done
225Installing docbook-4.3... done
226Installing docbook-4.2... done
227Installing docbook-4.1_4... done
228Installing docbook-1.4_1... done
229 done
230Installing bash-4.2.45... done
231Installing getopt-1.1.5... done
232 done
233Installing py27-libxml2-2.8.0... done
234Installing gnome-doc-utils-0.20.10... done
235Installing libnotify-0.7.5... done
236 done
237Installing xwud-1.0.4... done
238Installing xwininfo-1.1.3... done
239Installing xwd-1.0.6...Installing libxkbfile-1.0.8... done
240 done
241Installing xvkbd-3.5...Installing recordproto-1.14.2... done
242Installing printproto-1.0.5... done
243Installing libXtst-1.2.2... done
244Installing libXpm-3.5.10... done
245Installing libXp-1.0.2,1... done
246Installing libXmu-1.1.1,1... done
247Installing libXaw-1.0.11,2... done
248 done
249Installing xvinfo-1.1.2...Installing videoproto-2.3.2... done
250Installing libXv-1.0.9,1... done
251 done
252Installing xtrans-1.2.7... done
253Installing xterm-296... done
254Installing xsetroot-1.1.1...Installing xbitmaps-1.1.1... done
255 done
256Installing xsetmode-1.0.0... done
257Installing xset-1.2.3_1...Installing libXfontcache-1.0.5...Installing fontcacheproto-0.1.3... done
258 done
259 done
260Installing xscreensaver-gnome-5.12_1...Installing xf86vidmodeproto-2.3.1... done
261Installing libXxf86vm-1.1.3... done
262Installing dri2proto-2.8... done
263Installing polkit-0.105_1...Installing gnome_subr-1.0... done
264Installing gobject-introspection-1.36.0_2... done
265Installing dbus-1.6.12...===> Creating users and/or groups.
266Creating group 'messagebus' with gid '556'.
267Creating user 'messagebus' with uid '556'.
268 done
269 done
270Installing libtasn1-2.14... done
271Installing libgnome-keyring-2.32.0_5...Installing libIDL-0.8.14_1... done
272Installing gconf2-2.32.0_3...Installing dconf-0.14.1... done
273Installing dbus-glib-0.100.2... done
274Installing ORBit2-2.14.19... done
275 done
276 done
277Installing gnome-keyring-2.32.1_3...Installing ca_root_nss-3.15.1... done
278 done
279Installing pciids-20130818... done
280Installing libdrm-2.4.46...Installing libpciaccess-0.13.2... done
281 done
282Installing libGLU-9.0.0...Installing libGL-8.0.5_4... done
283 done
284Installing gle-3.1.0_3...Installing freeglut-2.8.1... done
285 done
286Installing libglade2-2.6.4_5... done
287 done
288Installing xrefresh-1.0.5... done
289Installing xrdb-1.0.9... done
290Installing xrandr-1.4.1... done
291Installing xprop-1.2.2... done
292Installing xpr-1.0.4... done
293Installing xorg-libraries-7.7...Installing xf86miscproto-0.9.3... done
294Installing xf86dgaproto-2.1... done
295Installing trapproto-3.4.3... done
296Installing scrnsaverproto-1.2.2... done
297Installing libxkbui-1.0.2_1... done
298Installing liboldX-1.0.1... done
299Installing libdmx-1.1.3...Installing dmxproto-2.3.1... done
300 done
301Installing libXxf86misc-1.0.3... done
302Installing libXxf86dga-1.1.4... done
303Installing libXvMC-1.0.8... done
304Installing libXres-1.0.7... done
305Installing libXevie-1.0.3... done
306Installing libXTrap-1.0.1... done
307Installing libXScrnSaver-1.2.2... done
308Installing libXfont-1.4.6,1...Installing fontsproto-2.1.2... done
309 done
310Installing libFS-1.0.5... done
311 done
312Installing xorg-docs-1.7,1... done
313Installing xorg-apps-7.7...Installing xmodmap-1.0.7... done
314Installing xmessage-1.0.4... done
315Installing xlsclients-1.1.2... done
316Installing xlsatoms-1.1.1... done
317Installing xkill-1.0.3... done
318Installing xkbutils-1.0.4... done
319Installing xkbevd-1.1.3... done
320Installing xkbcomp-1.2.4... done
321Installing xinput-1.6.0... done
322Installing xinit-1.3.2,1... done
323Installing xhost-1.0.6... done
324Installing xgc-1.0.4... done
325Installing xgamma-1.0.5... done
326Installing xf86dga-1.0.3... done
327Installing xev-1.2.1... done
328Installing xdriinfo-1.0.4... done
329Installing xdpyinfo-1.3.1... done
330Installing xcursorgen-1.0.5... done
331Installing xconsole-1.0.6... done
332Installing xcmsdb-1.0.4... done
333Installing xcalc-1.0.5...Installing font-misc-misc-1.1.2... done
334Installing font-alias-1.0.3... done
335Installing font-adobe-100dpi-1.0.3... done
336 done
337Installing xbacklight-1.2.0... done
338Installing xauth-1.0.7... done
339Installing x11perf-1.5.4... done
340Installing smproxy-1.0.5... done
341Installing setxkbmap-1.3.0... done
342Installing sessreg-1.0.8... done
343Installing luit-1.1.1... done
344Installing iceauth-1.0.6... done
345Installing bitmap-1.0.7... done
346Installing appres-1.0.4... done
347Installing twm-1.0.7... done
348Installing xclock-1.0.6_1... done
349 done
350Installing xorg-7.7...Installing xkeyboard-config-2.9... done
351Installing xcursor-themes-1.0.4_1... done
352Installing xorg-server-1.12.4_1,1...Installing policykit-0.9_6...===> Creating users and/or groups.
353Creating group 'polkit' with gid '562'.
354Creating user 'polkit' with uid '562'.
355 done
356Installing hal-0.5.14_20...Installing dmidecode-2.11... done
357Installing consolekit-0.4.3... done
358Installing libvolume_id-0.81.1... done
359===> Creating users and/or groups.
360Creating group 'haldaemon' with gid '560'.
361Creating user 'haldaemon' with uid '560'.
362 done
363Installing dri-8.0.5_3,2... done
364 done
365Installing xorg-fonts-type1-7.7...Installing font-xfree86-type1-1.0.4... done
366Installing font-ibm-type1-1.0.3... done
367Installing font-bitstream-type1-1.0.3... done
368Installing font-bh-type1-1.0.3... done
369Installing font-adobe-utopia-type1-1.0.4... done
370 done
371Installing xorg-fonts-miscbitmaps-7.7...Installing font-sun-misc-1.0.3... done
372Installing font-sony-misc-1.0.3... done
373Installing font-schumacher-misc-1.1.2... done
374Installing font-mutt-misc-1.0.3... done
375Installing font-micro-misc-1.0.3... done
376Installing font-jis-misc-1.0.3... done
377Installing font-isas-misc-1.0.3... done
378Installing font-dec-misc-1.0.3... done
379Installing font-daewoo-misc-1.0.3... done
380Installing font-cursor-misc-1.0.3... done
381Installing font-arabic-misc-1.0.3... done
382 done
383Installing xorg-fonts-cyrillic-7.7...Installing font-winitzki-cyrillic-1.0.3... done
384Installing font-screen-cyrillic-1.0.4... done
385Installing font-misc-cyrillic-1.0.3... done
386Installing font-cronyx-cyrillic-1.0.3... done
387 done
388Installing xorg-fonts-75dpi-7.7...Installing font-bitstream-75dpi-1.0.3... done
389Installing font-bh-lucidatypewriter-75dpi-1.0.3... done
390Installing font-bh-75dpi-1.0.3... done
391Installing font-adobe-utopia-75dpi-1.0.4... done
392Installing font-adobe-75dpi-1.0.3... done
393 done
394Installing xorg-fonts-100dpi-7.7...Installing font-bitstream-100dpi-1.0.3... done
395Installing font-bh-lucidatypewriter-100dpi-1.0.3... done
396Installing font-bh-100dpi-1.0.3... done
397Installing font-adobe-utopia-100dpi-1.0.4... done
398 done
399Installing xorg-fonts-7.7... done
400Installing xorg-drivers-7.7...Installing xf86-video-vesa-2.3.2... done
401Installing xf86-video-radeonhd-1.3.0_5... done
402Installing xf86-video-r128-6.9.1... done
403Installing xf86-video-openchrome-0.3.3... done
404Installing xf86-video-nv-2.1.20_1... done
405Installing xf86-video-mach64-6.9.4... done
406Installing xf86-video-intel-2.21.9... done
407Installing xf86-video-ati-6.14.6... done
408Installing xf86-input-mouse-1.9.0... done
409Installing xf86-input-keyboard-1.7.0... done
410 done
411 done
412Installing xbrightness-0.3... done
413Installing startup-notification-0.12_1... done
414Installing qt4-opengl-4.8.4...Installing qt4-gui-4.8.4...Installing xdg-utils-1.0.2_8... done
415Installing qt4-corelib-4.8.4_4... done
416 done
417 done
418Installing qt4-inputmethods-4.8.4... done
419Installing qt4-graphicssystems-opengl-4.8.4... done
420Installing numlockx-1.2... done
421Installing linux-f10-xorg-libs-7.4_1...Installing linux-f10-expat-2.0.1...Installing linux_base-f10-10_7...
422+++ Some programs may need linprocfs, please add it to /etc/fstab! +++
423
424Running linux ldconfig...
425 done
426 done
427Installing linux-f10-fontconfig-2.6.0... done
428 done
429Installing libxklavier-5.0_1,1...Installing iso-codes-3.43... done
430 done
431Installing libgnomekbd-2.32.0_1... done
432Installing libgnome-2.32.0_1...Installing samba36-libsmbclient-3.6.18...Installing tevent-0.9.18...Installing talloc-2.0.8... done
433 done
434Installing libexecinfo-1.1_3... done
435Installing tdb-1.2.12,1... done
436 done
437Installing avahi-app-0.6.31...Installing libdaemon-0.14... done
438Installing gdbm-1.10... done
439===> Creating users and/or groups.
440Creating group 'avahi' with gid '558'.
441Creating user 'avahi' with uid '558'.
442 done
443Installing gnome-mime-data-2.18.0_4... done
444Installing popt-1.16... done
445Installing libltdl-2.4.2... done
446Installing libbonobo-2.32.0... done
447Installing gnome-vfs-2.24.4_1...Installing gamin-0.1.10_6... done
448 done
449Installing libvorbis-1.3.3_1,3...Installing libogg-1.3.1,4... done
450 done
451Installing libcanberra-0.28_3... done
452Installing libaudiofile-0.2.7... done
453Installing esound-0.2.41_1... done
454 done
455Installing idesk-0.7.5_10...Installing imlib2-1.4.5_2,2...Installing giflib-nox11-4.2.1_2... done
456Installing libid3tag-0.15.1b... done
457 done
458 done
459Installing gtk-theme-switch-2.0.0.r2_5... done
460Installing gnome-session-2.32.1_2...Installing gnome-desktop-2.32.1_3...Installing py27-gtk-2.24.0_1...Installing py27-cairo-1.8.10_1... done
461Installing py27-gobject-2.28.6_3... done
462 done
463 done
464Installing upower-0.9.7_1... done
465Installing gnome-settings-daemon-2.32.1_4...Installing nss-3.15.1...Installing nspr-4.10... done
466Installing sqlite3-3.7.17_1... done
467 done
468Installing gstreamer-plugins-good-0.10.31,3...Installing gstreamer-plugins-0.10.36_3,3...Installing gstreamer-0.10.36... done
469Installing orc-0.4.17... done
470 done
471 done
472Installing speex-1.2.r1_4,1... done
473Installing pulseaudio-0.9.23_2...Installing libsndfile-1.0.25_3...Installing flac-1.3.0_1... done
474 done
475Installing libsamplerate-0.1.8_3... done
476===> Creating users and/or groups.
477Creating group 'pulse' with gid '563'.
478Creating group 'pulse-access' with gid '564'.
479Creating group 'pulse-rt' with gid '557'.
480Creating user 'pulse' with uid '563'.
481 done
482 done
483 done
484Installing gnome-panel-2.32.1_3...Installing gnome-menus-2.30.5... done
485Installing libwnck-2.30.6_1... done
486Installing libbonoboui-2.24.4_1...Installing libgnomecanvas-2.30.3_1...Installing libart_lgpl-2.3.21,1... done
487 done
488 done
489Installing gtk-engines2-2.20.2_1... done
490Installing cantarell-fonts-0.0.13.../usr/local/share/fonts/cantarell: caching, new cache contents: 2 fonts, 0 dirs
491/var/db/fontconfig: cleaning cache directory
492/root/.cache/fontconfig: not cleaning non-existent cache directory
493/root/.fontconfig: not cleaning non-existent cache directory
494/usr/local/bin/fc-cache: succeeded
495 done
496Installing libcroco-0.6.8... done
497Installing p11-kit-0.16.3... done
498Installing nettle-2.7.1...Installing gmp-5.1.2... done
499 done
500Installing gnutls-2.12.23_1... done
501Installing openldap-client-2.4.36... done
502Installing libproxy-0.4.6... done
503Installing libgweather-2.30.3_2...Installing glib-networking-2.36.2...Installing gsettings-desktop-schemas-3.6.1... done
504 done
505Installing gnome-icon-theme-2.31.0_3... done
506Installing libsoup-2.40.3_2... done
507 done
508Installing librsvg2-2.36.4...Installing libgsf-1.14.27... done
509 done
510Installing libsoup-gnome-2.40.3_3... done
511Installing libical-0.48... done
512Installing libgdata-0.6.6_1... done
513Installing evolution-data-server-2.32.1_4...Installing db41-4.1.25_4... done
514 done
515 done
516Installing gdm-2.30.7_2...Installing polkit-gnome-0.102... done
517===> Creating users and/or groups.
518Creating group 'gdm' with gid '92'.
519Creating user 'gdm' with uid '92'.
520 done
521Installing metacity-2.30.3_1... done
522Installing fluxbox-1.3.5... done
523Installing tk-8.6.0_2...Installing tcl-8.6.0_2... done
524 done
525Installing tk-8.5.14_1...Installing tcl-8.5.14_1... done
526 done
527Installing tk-8.4.20,2...Installing tcl-8.4.20_1,1... done
528 done
529Installing pangomm-2.28.4...Installing libxml++-2.34.2...Installing libsigc++-2.3.1... done
530Installing glibmm-2.36.2,1... done
531 done
532Installing cairomm-1.10.0_1... done
533 done
534Installing open-motif-2.3.4... done
535Installing linux-f10-pango-1.28.3...Installing linux-f10-cairo-1.8.0_2...Installing linux-f10-png-1.2.37_2... done
536 done
537 done
538Installing linux-f10-gtk2-2.14.7_4...Installing linux-f10-atk-1.24.0... done
539Installing linux-f10-jpeg-6b... done
540Installing linux-f10-tiff-3.8.2... done
541 done
542Installing gtkmm-2.24.2_1...Installing atkmm-2.22.6... done
543 done
544Installing gtk-3.8.2_1...Installing lcms2-2.5... done
545Installing colord-1.0.1...===> Creating users and/or groups.
546Creating group 'colord' with gid '970'.
547Creating user 'colord' with uid '970'.
548 done
549Installing at-spi2-core-2.8.0... done
550Installing at-spi2-atk-2.8.0... done
551 done
552Installing qt4-style-qtcurve-1.8.14...Installing qt4-xml-4.8.4... done
553Installing qt4-svg-4.8.4... done
554Installing qt4-imageformats-4.8.4...Installing libmng-1.0.10_2...Installing lcms-1.19_1,1... done
555 done
556 done
557Installing qt4-dbus-4.8.4... done
558 done
559Installing gtk2-qtcurve-theme-1.8.16... done
560Installing fluxbox-tenr-styles-pack-20071215_3... done
561Installing cursor-jimmac-theme-0.1_2... done
562Installing wqy-fonts-20100803_1,1... done
563Installing webfonts-0.30_6.../lib/X11/fonts/webfonts: skipping, no such directory
564/var/db/fontconfig: cleaning cache directory
565/root/.cache/fontconfig: not cleaning non-existent cache directory
566/root/.fontconfig: not cleaning non-existent cache directory
567/usr/local/bin/fc-cache: succeeded
568 done
569Installing fonts-indic-2.1.5_1.../lib/X11/fonts/fonts-indic: skipping, no such directory
570/var/db/fontconfig: cleaning cache directory
571/root/.cache/fontconfig: not cleaning non-existent cache directory
572/root/.fontconfig: not cleaning non-existent cache directory
573/usr/local/bin/fc-cache: succeeded
574 done
575Installing xf86-input-synaptics-1.7.1... done
576Installing serf-1.2.1_1...Installing apr-1.4.8.1.5.2...Installing db42-4.2.52_5... done
577 done
578 done
579Installing qt4-webkit-4.8.4_1...Installing qt4-xmlpatterns-4.8.4...Installing qt4-network-4.8.4... done
580 done
581Installing qt4-script-4.8.4... done
582Installing qt4-declarative-4.8.4...Installing qt4-sql-4.8.4... done
583 done
584 done
585Installing py27-requests-1.2.3...Installing py27-distribute-0.6.35... done
586215
587242
588 done
589Installing nspluginwrapper-1.4.4_1...Installing curl-7.31.0_1... done
590 done
591Installing linux-f10-flashplugin-11.2r202.297...Installing linux-f10-openssl-0.9.8g... done
592Installing linux-f10-nss-3.12.3.99.3_1...Installing linux-f10-nspr-4.7.6... done
593Installing linux-f10-sqlite3-3.5.9_1... done
594 done
595Installing linux-f10-libssh2-0.18... done
596Installing linux-f10-cyrus-sasl2-2.1.22_1... done
597Installing linux-f10-openldap-2.4.12_1... done
598Installing linux-f10-curl-7.19.6_1... done
599 done
600Installing aria2-1.17.1... done
601Installing vi-aspell-0.01.1.1_1,2...Installing aspell-0.60.6.1_2... done
602 done
603Installing uk-aspell-1.4.0.0_1,2... done
604Installing qt4-xmlpatterns-tool-4.8.4... done
605Installing qt4-clucene-4.8.4... done
606Installing py27-xml-0.8.4_2... done
607Installing libyaml-0.1.4_2... done
608Installing ibus-table-1.3.9.20110827_2...Installing ibus-1.4.1...Installing py27-xdg-0.19... done
609Installing py27-notify-0.1.1_9... done
610Installing py27-dbus-1.1.1... done
611 done
612Installing py27-sqlite3-2.7.5_3... done
613 done
614Installing ibus-qt-1.3.2... done
615Installing ibus-m17n-1.3.3_2...Installing libotf-0.9.13... done
616Installing libgd-2.1.0_1,1... done
617Installing m17n-lib-1.6.4_1...Installing m17n-db-1.6.4... done
618Installing fribidi-0.19.2_1... done
619 done
620 done
621Installing volman-0.7_1... done
622Installing uhidd-0.2.1_1...Installing cuse4bsd-kmod-0.1.30... done
623 done
624Installing swapexd-0.4... done
625Installing squashfs-tools-4.2...Installing lzo2-2.06... done
626 done
627Installing smartmontools-6.2... done
628Installing qzeitgeist-0.8.0...Installing qt4-qtestlib-4.8.4... done
629 done
630Installing pciutils-3.2.0_1...Installing libpci-3.2.0... done
631 done
632Installing pcbsd-utils-qt4-1378474934...Installing pcbsd-utils-1378413522...Installing jailme-0.1... done
633Installing debootstrap-1.0.53...Installing wget-1.14_2...Installing libidn-1.27... done
634 done
635 done
636Installing sipcalc-1.1.5... done
637Installing subversion-1.8.1... done
638Added new repo: "Official PC-BSD Repository" to the database.
639 done
640Installing qt4-multimedia-4.8.4... done
641Installing phonon-gstreamer-4.6.3...Installing phonon-4.6.0_1...Installing kdehier4-1.1.1... done
642 done
643 done
644Installing qt4-qtconfig-4.8.4... done
645Installing qt4-l10n-4.8.4... done
646Installing qt4-doc-4.8.4... done
647Installing qt4-codecs-kr-4.8.4... done
648Installing qt4-codecs-jp-4.8.4... done
649Installing qt4-pixeltool-4.8.4... done
650Installing qt4-iconengines-4.8.4... done
651Installing qt4-uic3-4.8.4...Installing qt4-qt3support-4.8.4... done
652Installing qt4-porting-4.8.4... done
653 done
654Installing qt4-uic-4.8.4... done
655Installing qt4-scripttools-4.8.4... done
656Installing qt4-rcc-4.8.4... done
657Installing qt4-qvfb-4.8.4... done
658Installing qt4-qtsolutions-singleapplication-20110722_1... done
659Installing qt4-qmlviewer-4.8.4... done
660Installing qt4-qdbusviewer-4.8.4... done
661Installing qt4-moc-4.8.4... done
662Installing qt4-makeqpf-4.8.4... done
663Installing qt4-linguist-4.8.4...Installing qt4-help-4.8.4...Installing qt4-sqlite-plugin-4.8.4... done
664 done
665Installing qt4-assistant-4.8.4... done
666 done
667Installing qt4-help-tools-4.8.4... done
668Installing qt4-qmake-4.8.4_1... done
669Installing qt4-codecs-tw-4.8.4... done
670Installing qt4-codecs-cn-4.8.4... done
671Installing qt4-accessible-4.8.4... done
672 done
673Installing libsunacl-1.0... done
674Installing gsmartcontrol-0.8.7_1... done
675Installing grub2-2.00_1...Installing mpfr-3.1.2... done
676Installing mpc-0.9... done
677Installing gcc-4.6.3...Installing binutils-2.23.2... done
678 done
679 done
680Installing fusefs-ntfs-2012.1.15...Installing fusefs-libs-2.9.3... done
681Installing fusefs-kmod-0.3.9.p1.20080208_11... done
682Installing libublio-20070103... done
683 done
684Installing fusefs-ext4fuse-0.1.3,1... done
685Installing fusefs-exfat-1.0.1... done
686Installing dvd+rw-tools-7.1...Installing cdrtools-3.00_2... done
687 done
688Installing cdrdao-1.2.3_4...Installing libmad-0.15.1b_2... done
689Installing libao-1.1.0_1... done
690 done
691Installing beadm-devel-0.8.99.20130730... done
692Installing ataidle-2.7.2... done
693Installing sudo-1.8.7_1... done
694Installing py27-fail2ban-0.8.9... done
695Installing pinentry-qt4-0.8.1_3...Installing libksba-1.3.0... done
696 done
697Installing pam_mkhomedir-0.2... done
698Installing pam_ldap-1.8.6_2... done
699Installing ossec-hids-local-2.7...===> Creating users and/or groups.
700Creating group 'ossec' with gid '966'.
701Creating user 'ossec' with uid '966'.
702Creating user 'ossecm' with uid '967'.
703Creating user 'ossecr' with uid '968'.
704 done
705Installing OpenSSH-askpass-1.2.4.1_2... done
706Installing linux-f10-libtasn1-1.5... done
707Installing linux-f10-libgpg-error-1.6... done
708Installing linux-f10-libgcrypt-1.4.4... done
709Installing linux-f10-gnutls-2.4.2_1... done
710Installing libssh2-1.4.3_1,2... done
711Installing libassuan-2.0.3... done
712Installing gnupg-2.0.21...Installing dirmngr-1.1.0_9...Installing pth-2.0.7... done
713 done
714 done
715Installing ru-aspell-0.99.f7.1_1,2... done
716Installing system-config-printer-1.1.16_6...Installing py27-cups-1.9.63... done
717Installing cups-pk-helper-0.0.4_3... done
718 done
719Installing splix-2.0.0_4...Installing libpaper-1.1.24_1... done
720Installing gsfonts-8.11_6... done
721Installing cups-image-1.5.4_1... done
722Installing cups-base-1.5.4_1...Installing xpdf-3.03_4... done
723 done
724 done
725Installing mpage-2.5.6... done
726Installing linux-f10-cups-libs-1.3.11_1... done
727Installing libijs-0.35_1... done
728Installing gutenprint-ijs-5.2.8...Installing gutenprint-base-5.2.8... done
729 done
730Installing gutenprint-foomatic-5.2.8_1...Installing foomatic-db-engine-4.0.7,2... done
731Installing foomatic-db-20090530_3... done
732 done
733Installing gutenprint-cups-5.2.8_1...Installing ghostscript9-9.06_4...Installing svgalib-1.4.3_6... done
734Installing jbig2dec-0.11_1... done
735 done
736Installing cups-pstoraster-8.15.4_7... done
737 done
738Installing gutenprint-5.2.8... done
739Installing foomatic-filters-4.0.7_2...Installing enscript-a4-1.6.4_5... done
740Installing a2ps-4.13b_5... done
741 done
742Installing foo2zjs-20110609_2... done
743Installing cups-smb-backend-1.0_6...Installing samba36-3.6.18... done
744 done
745Installing cups-pdf-2.6.1_1... done
746Installing cups-bjnp-0.5.3_4... done
747Installing pl-aspell-6.0.20061121.0_1,1... done
748Installing x11vnc-0.9.13_1... done
749Installing rsync-3.0.9_3... done
750Installing rdesktop-1.7.1_1... done
751Installing nss_ldap-1.265_7... done
752Installing netatalk-2.2.5,1...Installing db46-4.6.21.4... done
753 done
754Installing mosh-1.2.4...Installing protobuf-2.5.0... done
755 done
756Installing libvncserver-0.9.9_5... done
757Installing webcamd-3.10.0.7...Installing libv4l-0.8.8_1... done
758===> Creating users and/or groups.
759Creating group 'webcamd' with gid '145'.
760Creating user 'webcamd' with uid '145'.
761 done
762Installing pwcview-1.4.1_4...Installing aalib-1.4.r5_6... done
763Installing sdl-1.2.15_2,2... done
764 done
765Installing mplayer-skins-1.1.3_1... done
766Installing mplayer-1.1.r20130308...Installing libvdpau-0.7... done
767Installing libbluray-0.2.2,1...Installing libaacs-0.3.0_1... done
768 done
769 done
770Installing linux_dvbwrapper-kmod-1.0_1... done
771Installing libkate-0.4.1_2... done
772Installing libdvdcss-1.2.12... done
773Installing gstreamer-plugins-bad-0.10.23,3... done
774Installing mc-4.8.8...Installing libslang2-2.2.4_4... done
775 done
776Installing fftw3-3.3.3_1... done
777Installing ruby-1.9.3.448,1... done
778Installing lua-5.1.5_6... done
779Installing ko-baekmukfonts-ttf-2.2... done
780Installing ja-ibus-anthy-1.2.7_2,1...Installing ja-anthy-9100h_1... done
781 done
782Installing ja-font-vlgothic-20130422_1.../usr/local/lib/X11/fonts/TTF: caching, new cache contents: 15 fonts, 0 dirs
783/var/db/fontconfig: cleaning cache directory
784/.cache/fontconfig: not cleaning non-existent cache directory
785/usr/local/bin/fc-cache: succeeded
786 done
787Installing hu-aspell-0.99.4.2.0_1,2... done
788Installing iw-aspell-1.0.0_1,2... done
789Installing xv-3.10a_15... done
790Installing xsane-0.998_3...Installing sane-backends-1.0.23_1...===> Creating users and/or groups.
791Creating group 'saned' with gid '194'.
792Creating user 'saned' with uid '194'.
793 done
794 done
795Installing webp-0.1.3_1... done
796Installing poppler-glib-0.22.2...Installing poppler-data-0.4.6... done
797Installing poppler-0.22.2...Installing openjpeg-1.5.0_2... done
798 done
799 done
800Installing libwmf-0.2.8.4_10... done
801Installing liblqr-1-0.4.1_5... done
802Installing libfpx-1.3.1.1... done
803Installing epdfview-0.1.8_4... done
804Installing ImageMagick-6.8.0.7_1... done
805Installing de-aspell-20030222.1_1... done
806Installing fr-aspell-0.50.3_1,1... done
807Installing virtualbox-ose-kmod-4.2.16... done
808Installing virtualbox-ose-additions-4.2.16... done
809Installing virtualbox-ose-4.2.16_2...===> Creating users and/or groups.
810Creating group 'vboxusers' with gid '920'.
811Creating user 'vboxusers' with uid '920'.
812242
813266
814 done
815Installing mtools-4.0.10_3... done
816Installing vim-7.3.1314...Installing ctags-5.8... done
817Installing cscope-15.8a... done
818 done
819Installing emacs-24.3,3... done
820Installing nss_mdns-0.10_2... done
821Installing readline-6.2.4... done
822Installing libgtop-2.28.4... done
823Installing zh-libchewing-0.3.4... done
824Installing zh-ibus-pinyin-1.4.0_1... done
825Installing zh-ibus-chewing-1.4.3_1... done
826Installing vorbis-tools-1.4.0_6,3... done
827Installing linux-f10-alsa-plugins-oss-1.0.21_3...Installing linux-f10-alsa-lib-1.0.21_3... done
828 done
829Installing libcdaudio-0.99.12p2_2... done
830Installing gstreamer-plugins-cdparanoia-0.10.36,3...Installing cdparanoia-3.9.8_9... done
831 done
832Installing gstreamer-plugins-cdaudio-0.10.23,3... done
833Installing alsa-lib-1.0.26... done
834Installing zip-3.0... done
835Installing rpm2cpio-1.3_1... done
836Installing rar-4.2.0,3... done
837Installing ar-aspell-1.2.0_1,1... done
838Installing at-spi-1.32.0_2... done
839 done
840Make sure that the freetype module is loaded.  If it is not, add the following
841line to the "Modules" section of your X Windows configuration file:
842
843        Load "freetype"
844
845Add the following line to the "Files" section of X Windows configuration file:
846
847        FontPath "/usr/local/lib/X11/fonts/dejavu/"
848
849Note: your X Windows configuration file is typically /etc/X11/XF86Config
850if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org.
851====
852Note that some of the standard modules are provided as separate
853ports since they require extra dependencies:
854
855bsddb           databases/py-bsddb
856gdbm            databases/py-gdbm
857sqlite3         databases/py-sqlite3
858tkinter         x11-toolkits/py-tkinter
859
860Install them as needed.
861====
862The following catalogs are installed:
863
864 1) /usr/local/share/sgml/catalog
865
866   The top level catalog for SGML stuff.  It is not changed
867   by any ports/packages except textproc/xmlcatmgr.
868
869 2) /usr/local/share/sgml/catalog.ports
870
871   This catalog is for handling SGML stuff installed under
872   /usr/local/share/sgml.  It is changed by ports/packages.
873
874 3) /usr/local/share/xml/catalog
875
876   The top level catalog for XML stuff.  It is not changed
877   by any ports/packages except textproc/xmlcatmgr.
878
879 4) /usr/local/share/xml/catalog.ports
880
881   This catalog is for handling XML stuff installed under
882   /usr/local/share/xml.  It is changed by ports/packages.
883================================================================================
884You installed xterm with wide chars support. This introduces some limitations
885comparing to the plain single chars version: this version of xterm will use
886UTF-8 charset for selection buffers, breaking 8-bit copy/paste support unless
887you are using UTF-8 or ISO8859-1 locale. If you want 8-bit charset selections to
888work as before, use "eightBitSelectTypes" XTerm resource setting.
889
890For further information refer to the SELECT/PASTE section of xterm(1) manual
891page.
892================================================================================
893Since FreeBSD has new USB stack, freeglut normally doesn't build on FreeBSD 8
894(yet). To workaround this a small patch adds one include file and comments out
895content of one function (only leaves return NULL).
896
897This might cause side effects.  Joysticks do not work, and there might be ports
898that do not compile or applications that crash because of this.
899
900Do not hesitate to contact x11@FreeBSD.org if there are any issues and side
901effects because of this.
902======================================================================
903
904Qt 4 can be built with optional support for:
905 - Common UNIX Printing System (CUPS) (enabled by default)
906 - Network Audio System (NAS)
907 - Qt style that renders using GTK (QGTKSTYLE)
908
909In order to enable them, you have to add
910        QT4_OPTIONS=    CUPS NAS QGTKSTYLE
911to your /etc/make.conf and compile devel/qt4-corelib and
912x11-toolkits/qt4-gui ports.
913
914Attention! Whenever you change the QT4_OPTIONS both
915devel/qt4-corelib and x11-toolkits/qt4-gui ports must be rebuilt!
916
917======================================================================
918======================================================================
919
920Qt paint engine makes common use of shared memory. To avoid MIT-SHM
921errors (i.e., blank windows), you probably need to raise shared memory
922limits in loader.conf(5). The following should be safe values for the
923KDE Plasma Desktop:
924
925kern.ipc.shmall=32768
926kern.ipc.shmmni=1024
927kern.ipc.shmseg=1024
928
929======================================================================
930This software is based in part on the work of the FreeType Team.
931See <URL:http://www.freetype.org/>.
932
933Installation of the Linux base system is finished. The Linux kernel
934mode, which must be enabled for Linux binaries to run, is now
935enabled. Linux mode can be enabled permanently with the linux_enable
936variable of rc.conf(5).
937
938If you want to use shared memory in Linux applications, you need to set up
939a link from /dev/shm to a suitable place, e.g. by adding the following line
940to /etc/devfs.conf (takes effect on each boot):
941        link /tmp shm
942
943To make use of NIS you have to adjust yp.conf and nsswitch.conf in
944/compat/linux/etc/ accordingly. For example:
945
946Set your yp-server and yp-domainname in yp.conf:
947        domainname      my.yp.domainname
948        ypserver        my.yp.server
949
950Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
951        passwd: files nis
952        shadow: files nis
953        group:  files nis
954        hosts:  files dns nis
955
956WARNING: doing work which needs to chroot into the linux base may not work.
957In such cases (e.g. cross-development) you are better suited with a linux_dist
958port.
959===============================================================================
960
961Gamin will only provide realtime notification of changes for at most n files,
962where n is the minimum value between (kern.maxfiles * 0.7) and
963(kern.maxfilesperproc - 200). Beyond that limit, files will be polled.
964
965If you often open several large folders with Nautilus, you might want to
966increase the kern.maxfiles tunable (you do not need to set
967kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles).
968
969For a typical desktop, add the following line to /boot/loader.conf, then
970reboot the system:
971
972    kern.maxfiles="25000"
973
974The behavior of gamin can be controlled via the various gaminrc files.
975See http://www.gnome.org/~veillard/gamin/config.html on how to create
976these files.  In particular, if you find gam_server is taking up too much
977CPU time polling for changes, something like the following may help
978in one of the gaminrc files:
979
980# reduce polling frequency to once per 10 seconds
981# for UFS file systems in order to lower CPU load
982fsset ufs poll 10
983
984===============================================================================
985The ESounD daemon (esd) must be started on a per-user basis.  This is typically
986done by the Session Manager in GNOME.  However, if you are not using the
987GNOME Desktop, you will need to add something like the following to your
988X Windows initialization script:
989
990esd -terminate -nobeeps -as 2
991###############################################################################
992
993Idesk was installed
994
995You need to configure idesk before you can use it. A detailed explanation can
996be found in the README file which resides in:
997
998/usr/local/share/doc/idesk
999
1000Unless you have chosen not to install it ;)
1001
1002###############################################################################
1003************************************************************
1004
1005The OpenLDAP client package has been successfully installed.
1006
1007Edit
1008  /usr/local/etc/openldap/ldap.conf
1009to change the system-wide client defaults.
1010
1011Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at
1012  http://www.OpenLDAP.org/faq/index.cgi?file=3
1013for more information.
1014
1015************************************************************
1016GDM is installed.
1017
1018Do _NOT_ use /etc/ttys to start gdm at boot time.  This will result in gdm
1019hanging or restarting constantly. Instead, add gdm_enable="YES" to
1020/etc/rc.conf. GDM will be started automatic on the next reboot.
1021**************************************************************************
1022Please add /usr/local/lib/X11/fonts/wqy for your X server by either:
1023
1024# xset fp+ /usr/local/lib/X11/fonts/wqy
1025# xset fp rehash
1026
1027or by adding the following line to the section "Files" of
1028your X-server configuration file (usually /etc/X11/xorg.conf)
1029and restarting the X-server:
1030
1031Section "Files"
1032...
1033    FontPath   "/usr/local/lib/X11/fonts/wqy"
1034...
1035EndSection
1036
1037**************************************************************************
1038IMPORTANT - READ CAREFULLY: You may not use these fonts if you do not agree to
1039the terms of the Microsoft End-User License Agreement ("EULA").  You will find
1040the EULA at /usr/local/share/doc/webfonts/LICENSE.  If you read and agree
1041to the EULA, you can start using the fonts by following these instructions:
1042
1043Make sure that the freetype module is loaded.  If it is not, add the following
1044line to the "Modules" section of xorg.conf or XF86Config:
1045
1046        Load "freetype"
1047
1048Add the following line to the "Files" section of xorg.conf or XF86Config:
1049
1050        FontPath "/usr/local/lib/X11/fonts/webfonts/"
1051*******************************************************************************
1052
1053        To enable QT's database support, install the database plugin ports.
1054        The following plugin ports are available:
1055
1056                IBase/Firebird  - databases/qt4-ibase-plugin
1057                MySQL           - databases/qt4-mysql-plugin
1058                ODBC            - databases/qt4-odbc-plugin
1059                PostgreSQL      - databases/qt4-pgsql-plugin
1060                SQLite          - databases/qt4-sqlite-plugin                           
1061
1062*******************************************************************************
1063================================================================
1064
1065The nspluginwrapper is installed on a per user basis. All of
1066the commands can be run as an unprivileged user.
1067
1068================================================================
1069
1070To install all the plugins from their default locations:
1071
1072nspluginwrapper -v -a -i
1073
1074================================================================
1075
1076To install a specific plugin:
1077
1078nspluginwrapper -i path/to/plugin.so
1079
1080================================================================
1081
1082To remove a specific plugin:
1083
1084nspluginwrapper -r path/to/plugin.so
1085
1086================================================================
1087
1088To view all currently installed plugins:
1089
1090nspluginwrapper -l
1091
1092================================================================
1093-------------------------------------------------------------------
1094ibus installation finished. To use ibus, please do the following:
1095
1096If you are using bash, please add following lines to your $HOME/.bashrc:
1097
1098export XIM=ibus
1099export GTK_IM_MODULE=ibus
1100export QT_IM_MODULE=xim
1101export XMODIFIERS=@im=ibus
1102export XIM_PROGRAM="ibus-daemon"
1103export XIM_ARGS="--daemonize --xim"
1104
1105If you are using tcsh, please add following lines to your $HOME/.cshrc:
1106
1107setenv XIM ibus
1108setenv GTK_IM_MODULE ibus
1109setenv QT_IM_MODULE xim
1110setenv XMODIFIERS @im=ibus
1111setenv XIM_PROGRAM ibus-daemon
1112setenv XIM_ARGS "--daemonize --xim"
1113
1114If you are using KDE4, you may create a shell script in $HOME/.kde4/env,
1115and add following lines:
1116
1117#!/bin/sh
1118export XIM=ibus
1119export GTK_IM_MODULE=ibus
1120export QT_IM_MODULE=xim
1121export XMODIFIERS=@im=ibus
1122export XIM_PROGRAM="ibus-daemon"
1123export XIM_ARGS="--daemonize --xim"
1124
1125Following input methods/engines are available in ports:
1126
1127chinese/ibus-chewing            Chewing engine for IBus
1128chinese/ibus-pinyin             The PinYin input method
1129japanese/ibus-anthy             Anthy engine for IBus
1130japanese/ibus-mozc              Mozc engine for IBus
1131japanese/ibus-skk               SKK engine for IBus
1132korean/ibus-hangul              Hangul engine for IBus
1133textproc/ibus-kmfl              KMFL IMEngine for IBus framework
1134textproc/ibus-m17n              The m17n IMEngine for IBus framework
1135textproc/ibus-table             Table based IM framework for IBus
1136
1137and QT4 input method module, textproc/ibus-qt.
1138
1139If ibus cannot start or the panel does not appear, please ensure
1140that you are using up-to-date python.
1141There's a bug in python 2.5, which may prevent the panel from appearing.
1142-------------------------------------------------------------------
1143--------------------------------------------------------
1144ibus-qt install finished. You may select ibus as the
1145input method in qtconfig.
1146
1147--------------------------------------------------------
1148==============================================================================
1149
1150To use uhidd daemon for USB HID devices, depends on which sub class
1151driver you want to attach, to avoid confilicts between the daemon and
1152the kernel drivers, you should either use the command line option '-u'
1153to instruct the daemon to detach active kernel drivers attached to
1154a device, or you should remove some of those entries 'device ums',
1155'device ukbd', or 'device uhid' from your kernel config file and
1156recompile the kernel.
1157
1158Note that if the USB kernel drivers are compiled as kernel modules,
1159you should also remove the relevant devd(8) rules in /etc/devd/usb.conf
1160config file, so those modules will not be loaded automatically by devd(8)
1161when devices are attached.
1162
1163If you want to run uhidd deamon at the startup, add the following lines to
1164/etc/rc.conf:
1165
1166        uhidd_flags="-kmohsu"
1167        uhidd_enable="YES"
1168
1169Note that you need to modify the uhidd_flags (command line options)
1170according to which sub class drivers you want to use.
1171
1172To manually start/stop uhidd daemon on certain device, run:
1173
1174        /usr/local/etc/rc.d/uhidd [start|stop] /dev/ugen.X.Y
1175
1176See http://wiki.FreeBSD.org/uhidd for more details about how to install and
1177setup the daemon.
1178
1179==============================================================================
1180smartmontools has been installed
1181
1182To check the status of drives, use the following:
1183
1184        /usr/local/sbin/smartctl -a /dev/ad0    for first ATA/SATA drive
1185        /usr/local/sbin/smartctl -a /dev/da0    for first SCSI drive
1186        /usr/local/sbin/smartctl -a /dev/ada0   for first SATA drive
1187
1188To include drive health information in your daily status reports,
1189add a line like the following to /etc/periodic.conf:
1190        daily_status_smart_devices="/dev/ad0 /dev/da0"
1191substituting the appropriate device names for your SMART-capable disks.
1192
1193To enable drive monitoring, you can use /usr/local/sbin/smartd.
1194A sample configuration file has been installed as
1195/usr/local/etc/smartd.conf.sample
1196Copy this file to /usr/local/etc/smartd.conf and edit appropriately
1197
1198To have smartd start at boot
1199        echo 'smartd_enable="YES"' >> /etc/rc.conf
1200======================================================================
1201
1202You'll have to install sysutils/zeitgeist to enable event logging.
1203
1204======================================================================
1205*** NOTE ***
1206To successfully create an installation of Debian GNU/kFreeBSD
1207debootstrap requires the following kernel modules loaded:
1208
1209fdescfs linprocfs linsysfs tmpfs
1210======================================================================
1211
1212Please, consider installing backends for Phonon:
1213- multimedia/phonon-gstreamer   GStreamer backend
1214- multimedia/phonon-vlc         VLC backend
1215
1216======================================================================
1217======================================================================
1218
1219You'll need to install some GStreamer plugins to make Phonon able to
1220play something via this backend: multimedia/gstreamer-plugins-all will
1221let you choose among all of them.
1222
1223======================================================================
1224#############################################################
1225To install GRUB on the master boot record of your hard drive
1226use 'grub-install <drive-to-install>' command.
1227
1228A typical menu entry in /boot/grub/grub.cfg for FreeBSD:
1229menuentry "FreeBSD" {
1230        set root="(hd0,msdos1,bsd1)"
1231        kfreebsd /boot/loader
1232}
1233Or use grub-mkconfig to create the config file.
1234#############################################################
1235Install the fuse kernel module to use this port.
1236==============================================================================
1237
1238In order to automatically load the fuse module on startup, you need to:
1239
1240 - Add fusefs_enable="YES" to your /etc/rc.conf.
1241 - Run "/usr/local/etc/rc.d/fusefs start" (for the first time).
1242
1243Set "sysctl vfs.usermount=1" if you want to be able to mount fuse devices as
1244an ordinary user.
1245
1246Now fuse filesystems (sysutils/fusefs-*) can be mounted at startup from
1247/etc/fstab with the "late" parameter. This requires a symlink in /usr/sbin
1248named "mount_<fstype>", which is not created by all the fusefs ports.
1249
1250Note that the rc.d script will unmount all fuse filesystems when called with
1251"stop" (in reverse order in case of nested mounts), so it can unload the
1252kernel module.
1253
1254==============================================================================
1255==============================================================================
1256
1257NTFS-3G has been installed, for information, known issues and how to report
1258bugs see the FreeBSD README:
1259
1260/usr/local/share/doc/ntfs-3g/README.FreeBSD
1261
1262Also see the official README (but has some Linux specific parts).
1263
1264==============================================================================
1265===========================================================================
1266
1267Note: The location of the cdrtools `defaults' files has been set to
1268
1269        /usr/local/etc
1270
1271This is the FreeBSD ports standard config file location, NOT the cdrtools
1272standard location, which is /etc/default.
1273
1274The reason for this is that FreeBSD ports and packages should not use
1275configuration files outside of /usr/local.
1276
1277===========================================================================
1278
1279- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1280
1281Please do not edit the fail2ban.conf and jail.conf files as they
1282will be overwritten upon each upgrade of the port.
1283
1284Instead, create new files named fail2ban.local and jail.local
1285
1286For more information, see the official manual:
1287
1288http://www.fail2ban.org/wiki/index.php/MANUAL_0_8#Configuration
1289
1290- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1291
1292You may want to add something like this to your /etc/pam.d/login
1293or /etc/pam.d/sshd ( when you've configured ssh with PAM )
1294file to use this module:
1295
1296session         required       /usr/local/lib/pam_mkhomedir.so
1297================================================================================
1298Copy /usr/local/etc/ldap.conf.dist to /usr/local/etc/ldap.conf, then edit
1299/usr/local/etc/ldap.conf in order to use this module.  Add a line similar to
1300the following to /etc/pam.conf on 4.X, or create an /etc/pam.d/ldap on 5.X
1301and higher with a line similar to the following:
1302
1303login   auth    sufficient      /usr/local/lib/pam_ldap.so
1304================================================================================
1305After installation, you need to edit the ossec.conf file to reflect
1306the correct settings for your environment.  All the files related
1307to ossec-hids have been installed in /usr/local/ossec-hids and
1308its subdirectories.
1309
1310For information on proper configuration, see http://www.ossec.net/.
1311
1312To enable the startup script, add ossechids_enable="YES" to
1313/etc/rc.conf.  To enable database output, execute:
1314
1315/usr/local/ossec-hids/bin/ossec-control enable database
1316
1317Then check this documentation:
1318
1319http://www.ossec.net/doc/manual/output/database-output.html
1320
1321When you deinstall this port after starting the daemons once, many
1322directories that are created by the daemons will remain.  To fully
1323remove the port you need to delete those directories manually.  To
1324further enhance the security on your system, you may also enable
1325some checks in PAM for a fast reaction against intrusions.
1326###############################################################################
1327                                A T T E N T I O N
1328
1329In order to use gpg-agent, you need to install a pinentry dialog.
1330
1331The following ports of pinentry dialogs are available:
1332
1333security/pinentry-curses        (ncurses based dialog)
1334security/pinentry-gtk           (GTK 1.2 based dialog)
1335security/pinentry-gtk2          (GTK 2.x based dialog)
1336security/pinentry-qt            (QT3 based dialog)
1337security/pinentry-q4            (QT4 based dialog)
1338
1339###############################################################################
1340======================================================================
1341
1342To enable printing with local printer you need to give group 'cups'
1343r/w access to printer device:
1344
13451) Add following to /etc/devfs.rules (create if it doesn't exist):
1346
1347[system=10]
1348# FreeBSD 7.x
1349add path 'unlpt*' mode 0660 group cups
1350add path 'ulpt*' mode 0660 group cups
1351add path 'lpt*' mode 0660 group cups
1352# FreeBSD 8.x
1353add path 'usb*' mode 0770 group cups
1354add path 'ugen*' mode 0660 group cups
1355
13562) And following to /etc/rc.conf:
1357
1358devfs_system_ruleset="system"
1359
13603) Restart devfs: /etc/rc.d/devfs restart
1361
1362If your system supports 'devd' you can copy
1363$PREFIX/share/examples/cups/ulpt-cupsd.conf to $PREFIX/etc/devd/
1364
1365To enable printing under Gimp and MS-Windows clients do the following:
1366
13671) Uncomment application/octet-stream line in mime.types
13682) Uncomment application/octet-stream line in mime.convs
13693) Restart cupsd
1370
1371If you are using libusb, it is important that no device driver, e.g.
1372ulpt(4) is attached to the device you wish to use. In this case please
1373ensure the cups user and group has read/write access to /dev/ugen*
1374
1375If you are using a USB printer wtih FreeBSD 8.0 or later, you will
1376need to find the proper /dev/usb/* device pointed at by the /dev/ugen*
1377entry. Follow the instructions for devfs.rules as above, but append a
1378rule similar to the following for a printer attached as /dev/ugen0.2:
1379
1380add path 'usb/0.2.*' mode 0660 group cups
1381======================================================================
1382  +=======================================================================+
1383  |                  !!!      IMPORTANT NOTICE      !!!                   |
1384  +=======================================================================+
1385  |      If you are upgrading your current version, you MUST delete       |
1386  |     your printer in the CUPS interface and install it again. This     |
1387  |   operation MUST be done since CUPS make a copy of the PPD file and   |
1388  |                this file is modified between versions.                |
1389  +=======================================================================+
1390
1391Installation of the color profile for color printers:
1392-----------------------------------------------------
1393
1394        Color printers needs color profile files to get better results. These
1395files are provided by your printer manufacturer and you have to install them
1396manually. To do that, download the linux official drivers and locate the "cms"
1397directory. Install them with the command:
1398
1399                # make installcms CMSDIR=/path/to/cms/directory \
1400                        MANUFACTURER=samsung or xerox or dell
1401
1402        Samsung color profile files are available at:
1403                (Then use MANUFACTURER=samsung)
1404
1405                http://splix.ap2c.org/samsung_cms.tar.bz2
1406Note: in order to use the script "dvipdf", dvips must be installed.
1407This program may be provided by either print/dvips or print/dvipsk-tetex
1408(print/dvipsk-tetex may be preferable since it doesn't conflict with
1409tetex things).
1410
1411FAPIfontmap and FAPIcidfmap in /usr/local/share/ghostscript/9.06/Resource/Init
1412have to be configured if you want to use FAPI feature.
1413###############################################################################
1414
14151) Please read the detailed installation instructions in the file:
1416
1417   * /usr/local/share/doc/foo2zjs/INSTALL
1418
14192) Go to tmp directory and run getweb script.
1420
1421   # cd /tmp && getweb all
1422
14233) Copy icm and img files.
1424
1425   # cp DL*.icm CP*.icm km2430*.icm /usr/local/share/foo2zjs/icm && \
1426     cp sihp*.img /usr/local/share/foo2zjs/firmware && \
1427     cp hpclj26*.icm km2430*.icm /usr/local/share/foo2hp/icm && \
1428     rm *.icm *.img
1429
14304) Enjoy it ;)
1431
1432###############################################################################
1433===============================================================================
1434Samba3 *package* now doesn't include ADS support due the portability problems
1435with Kerberos5 libraries on different installations. You need to compile the
1436port yourself to get this functionality.
1437
1438For additional hints and directions, please, look into the README.FreeBSD file.
1439===============================================================================
1440CUPS smb backend is now installed.
1441
1442Please configure your samba environment if
1443you haven't already done so. To do so edit
1444
1445/usr/local/etc/smb.conf
1446
1447You can then add a new printer to CUPS.
1448smbspool(8) manpage describes device URI
1449format. In most cases (latest samba 2.x
1450and samba 3.x), it's something like this:
1451
1452smb://username:password@server/printer
1453smb://username:password@workgroup/server/printer
1454
1455But a CUPS article describes another syntax,
1456so beware.
1457=====================================================================
1458The nss_ldap module expects to find its configuration files at the
1459following paths:
1460
1461LDAP configuration:     /usr/local/etc/nss_ldap.conf
1462LDAP secret (optional): /usr/local/etc/nss_ldap.secret
1463
1464
1465WARNING: For users of previous versions of this port:
1466WARNING:
1467WARNING: Previous versions of this port expected configuration files
1468WARNING: to be located at /etc/ldap.conf and /etc/ldap.secret.  You
1469WARNING: may need to move these configuration files to their new
1470WARNING: location specified above.
1471=====================================================================
1472###
1473If you compiled WITH_PAM support, you need to edit /etc/pam.conf to add
1474support for netatalk.  To do so, add the following three lines to this
1475file:
1476
1477netatalk        auth    required        pam_unix.so     try_first_pass
1478netatalk        account required        pam_unix.so     try_first_pass
1479netatalk        session required        pam_permit.so
1480###
1481=====================================================================
1482Please note that mosh requires UTF-8 character set.  To set this on a
1483per-user basis, you should add the following to ~/.login_conf:
1484me:\
1485        :charset=UTF-8:\
1486        :lang=en_US.UTF-8:\
1487        :setenv=LC_COLLATE=C:
1488
1489This only needs to be completed on the client.
1490=====================================================================
1491*********************************************************************
14921) webcamd requires the cuse4bsd kernel module, please load this
1493by doing
1494
1495       # kldload cuse4bsd
1496
1497or adding
1498
1499       cuse4bsd_load="YES"
1500
1501to your /boot/loader.conf.
1502
15032) Please restart devd as the configuration changed
1504
1505        # service devd restart
1506
1507*********************************************************************
1508------------------------------------------------------------------------------
1509 Your SDL library has been built with libvgl support, which means that you
1510 can run almost any SDL application straight on your console (VESA 2.0
1511 compatible videocard is required).
1512
1513 To do this you have to load the vesa kernel module or enable it in your
1514 kernel, and set environment variable "SDL_VIDEODRIVER=vgl".
1515------------------------------------------------------------------------------
1516
1517===================================================================
1518MPlayer's comprehensive documentation covers many topics like
1519output devices, video encoding, repairing broken files etc.
1520It is auto-generated daily and can be found on the project
1521homepage in the documentation section:
1522
1523http://www.mplayerhq.hu/design7/documentation.html
1524===================================================================
1525MPlayer's system-wide configuration dir is
1526
1527/usr/local/etc/mplayer
1528
1529If you want to install configuration files into this location
1530in order to change mplayer's default settings for all users on
1531your system, you find some examples in
1532
1533/usr/local/share/mplayer/examples/etc
1534===================================================================
1535====
1536Some of the standard commands are provided as separate ports for ease
1537of upgrading:
1538
1539        devel/ruby-gems:        gem - RubyGems package manager
1540        devel/rubygem-rake:     rake - Ruby Make
1541
1542And some of the standard libraries are provided as separate ports
1543since they require extra dependencies:
1544
1545        converters/ruby-iconv:  iconv module
1546        databases/ruby-gdbm:    GDBM module
1547        x11-toolkits/ruby-tk:   Tcl/Tk modules
1548        japanese/ruby-tk:       Tcl/Tk modules for Japanized Tcl/Tk
1549        lang/ruby-mode.el:      Emacs lisp modules
1550
1551Install them as occasion demands.
1552====
1553ibus-anthy installation finished. To use ibus-anthy, please do the following:
1554
1555If you are using bash or zsh, please add following lines to your $HOME/.bashrc or
1556$HOME/.zshrc:
1557
1558export XIM=ibus
1559export GTK_IM_MODULE=ibus
1560export QT_IM_MODULE=xim
1561export XMODIFIERS=@im=ibus
1562export XIM_PROGRAM="ibus-daemon"
1563export XIM_ARGS="-r --daemonize --xim"
1564
1565If you are using tcsh, please add following lines to your $HOME/.cshrc:
1566
1567setenv XIM ibus
1568setenv GTK_IM_MODULE ibus
1569setenv QT_IM_MODULE xim
1570setenv XMODIFIERS @im=ibus
1571setenv XIM_PROGRAM ibus-daemon
1572setenv XIM_ARGS "-r --daemonize --xim"
1573
1574If you are using KDE4, you may create a shell script in $HOME/.kde4/env,
1575and add following lines:
1576
1577#!/bin/sh
1578export XIM=ibus
1579export GTK_IM_MODULE=ibus
1580export QT_IM_MODULE=xim
1581export XMODIFIERS=@im=ibus
1582export XIM_PROGRAM="ibus-daemon"
1583export XIM_ARGS="-r --daemonize --xim"
1584
1585If ibus cannot start or the panel does not appear, please ensure
1586that you are using up-to-date python.
1587There's a bug in python 2.5, which may prevent the panel from appearing.
1588==================================================================
1589
1590saned will log to the 'daemon' facility; this is a hard-coded
1591default. Also, saned has no support for SSL/TLS or cryptographic
1592authentication; you may wish to deploy security/stunnel to wrap
1593it if you have concerns about security.
1594
1595If you are using a USB scanner, you should create
1596/usr/local/etc/devd/saned.conf to allow saned access permissions.
1597Currently, devfs.rules(5) has no support for USB specific filters
1598such as vendor, product and serial number.
1599
1600Here is an example saned.conf for an Epson CX3650
1601multi-function scanner/printer device (assuming you are sharing
1602the printer function with cups):
1603
1604notify 100 {
1605        match "system" "USB";
1606        match "subsystem" "INTERFACE";
1607        match "type" "ATTACH";
1608        match "cdev" "ugen[0-9].[0-9]";
1609        match "vendor" "0x04b8";
1610        match "product" "0x080e";
1611        action "chown -L cups:saned /dev/$cdev && chmod -L 660 /dev/$cdev";
1612};
1613
1614To determine which port your scanner is connected to, inspect the
1615output of 'usbconfig list' before and after connecting your scanner,
1616and note the numbers which appear after 'ugen' in the first column.
1617Then, use 'usbconfig -d X.Y dump_device_desc' to learn the idVendor
1618and idProduct fields, and plug them into the above example entry.
1619
1620Finally, restart devd with the command:
1621 # /etc/rc.d/devd restart
1622
1623Please take /usr/local/etc/sane.d/dll.conf
1624as an example only; you may wish to enable only the 'net' backend
1625on client machines; be sure to point it at your scan server.
1626
1627If you are setting up a scan server, you may also wish to edit
1628/usr/local/etc/sane.d/saned.conf
1629to only permit specific machines.
1630
1631==================================================================
1632==========================================================================
1633NOTE: In order to compile examples for liblqr, you will
1634also need pngwriter port (/usr/ports/graphics/pngwriter).
1635Examples are located in /usr/local/share/examples/liblqr-1
1636==========================================================================
1637=============================================================================
1638
1639VirtualBox Guest Additions were installed.
1640
1641
1642You need to enable the vboxguest startscript to load the kernel module and
1643vboxservice to use host time synchronization.
1644
1645vboxguest_enable="YES"
1646vboxservice_enable="YES"
1647
1648You also have to add all X11 users that want to use any of the additional
1649features (clipboard sharing, window scaling) to the wheel group.
1650
1651% pw groupmod wheel -m jerry
1652
1653Reboot the machine to load the needed kernel modules.
1654
1655For detailed informations please visit http://wiki.freebsd.org/VirtualBox
1656
1657=============================================================================
1658=============================================================================
1659
1660VirtualBox was installed.
1661
1662You need to load the vboxdrv kernel module via /boot/loader.conf:
1663
1664vboxdrv_load="YES"
1665
1666You also have to add all users to your vboxusers group in order to use vbox.
1667
1668% pw groupmod vboxusers -m jerry
1669
1670Reboot the machine to load the needed kernel modules.
1671
1672
1673Bridging Support:
1674=================
1675
1676For bridged networking please add the following line to your /etc/rc.conf:
1677
1678vboxnet_enable="YES"
1679
1680
1681USB Support:
1682============
1683
1684For USB support your user needs to be in the operator group and needs read
1685and write permissions to the USB device.
1686
1687% pw groupmod operator -m jerry
1688
1689Add the following to /etc/devfs.rules (create if it doesn't exist):
1690
1691[system=10]
1692add path 'usb/*' mode 0660 group operator
1693
1694To load these new rule add the following to /etc/rc.conf:
1695
1696devfs_system_ruleset="system"
1697
1698Then restart devfs to load the new rules:
1699
1700% /etc/rc.d/devfs restart
1701
1702
1703Troubleshooting:
1704================
1705
1706Running VirtualBox as non-root user may fail with a fatal error
1707NS_ERROR_FACTORY_NOT_REGISTERED. In this case delete /tmp/.vbox-*-ipc file.
1708
1709Check wiki page for known issues and troubleshooting:
1710http://wiki.freebsd.org/VirtualBox
1711
1712Please report any problems to emulation@. Thanks!
1713
1714=============================================================================
1715************************************************************
1716Please verify /usr/local/etc/mtools.conf for your machine.
1717************************************************************
1718**************************************************************************
1719The executable for Exuberant CTAGS is installed as /usr/local/bin/exctags
1720**************************************************************************
1721===============================================================================
1722
1723In order to use the File System read/write monitor, you must chmod
1724/dev/devstat so that all users can open it read-only.  For example:
1725
1726# chmod 0444 /dev/devstat
1727
1728In order for this to persist across reboots, add the following to
1729/etc/devfs.conf:
1730
1731perm    devstat 0444
1732
1733===============================================================================
1734Running chroot command: pkg info -e pcbsd-meta-kde-1373648951.txz
1735Installing package: pcbsd-meta-kde-1373648951.txz
1736Installing pcbsd-meta-kde-1373648951...Installing xcb-util-image-0.3.9... done
1737Installing qimageblitz-0.0.6_2... done
1738Installing py27-qt4-opengl-4.10.2,1...Installing py27-qt4-gui-4.10.2,1...Installing qt4-designer-4.8.4... done
1739Installing qscintilla2-2.7.2,1... done
1740Installing py27-sip-4.14.7,1... done
1741Installing py27-qt4-core-4.10.2,1... done
1742 done
1743 done
1744Installing plasma-scriptengine-ruby-4.10.5...Installing kdelibs-4.10.5...Installing shared-desktop-ontologies-0.11.0... done
1745Installing attica-0.4.2,2... done
1746Installing kde4-icons-oxygen-4.10.5... done
1747Installing soprano-2.9.3...Installing redland-1.0.16...Installing rasqal-0.9.30...Installing raptor2-2.0.9_1...Installing yajl-2.0.4_1... done
1748 done
1749 done
1750 done
1751Installing libiodbc-3.52.8... done
1752 done
1753Installing enchant-1.6.0_1... done
1754Installing clucene-2.3.3.4_2... done
1755Installing polkit-qt-0.103.0_1... done
1756Installing mDNSResponder-333.10... done
1757Installing hupnp-1.0.0_1... done
1758Installing xvid-1.3.2,1... done
1759Installing x264-0.125.2201...Installing gpac-libgpac-0.4.5_6,1... done
1760 done
1761Installing schroedinger-1.0.11_1... done
1762Installing libvpx-1.1.0... done
1763Installing libtheora-1.1.1_3... done
1764Installing ffmpeg1-1.2.2...Installing opencv-core-2.3.1_7... done
1765Installing lame-3.99.5_1... done
1766 done
1767Installing kde4-shared-mime-info-1.2... done
1768Installing ilmbase-1.0.3... done
1769Installing exiv2-0.23,1... done
1770Installing OpenEXR-1.7.1... done
1771Installing qca-2.0.3_1... done
1772Installing libdbusmenu-qt-0.9.2_2... done
1773Installing libstreams-0.7.8... done
1774Installing libstreamanalyzer-0.7.8_1... done
1775 done
1776Installing kactivities-4.10.5...Installing nepomuk-core-4.10.5...Installing poppler-qt4-0.22.2... done
1777Installing taglib-1.8... done
1778 done
1779 done
1780Installing qwt-5.2.3... done
1781Installing ebook-tools-0.2.2...Installing libzip-0.11.1... done
1782 done
1783Installing gpgme-1.3.2... done
1784Installing cyrus-sasl-2.1.26_2...*** Added group `cyrus' (id 60)
1785*** Added user `cyrus' (id 60)
1786 done
1787Installing libspectre-0.2.6_1... done
1788Installing e2fsprogs-libuuid-1.42.8... done
1789Installing chmlib-0.40... done
1790Installing prison-1.0_1...Installing libqrencode-3.4.3... done
1791Installing libdmtx-0.7.4_3... done
1792 done
1793Installing okular-4.10.5...Installing djvulibre-3.5.25.3_1... done
1794 done
1795Installing kate-4.10.5...Installing qjson-0.8.1... done
1796 done
1797Installing smokeqt-4.10.5...Installing smokegen-4.10.5... done
1798 done
1799Installing smokekde-4.10.5...Installing boost-libs-1.52.0_2... done
1800Installing kdepimlibs-4.10.5...Installing qt4-mysql-plugin-4.8.4...Installing mysql-client-5.5.33... done
1801 done
1802Installing mysql-server-5.5.33...===> Creating users and/or groups.
1803Creating group 'mysql' with gid '88'.
1804Creating user 'mysql' with uid '88'.
1805 done
1806Installing akonadi-1.10.2... done
1807 done
1808 done
1809Installing ruby19-qtruby-4.10.5... done
1810Installing ruby19-korundum-4.10.5... done
1811 done
1812Installing plasma-scriptengine-python-4.10.5...Installing py27-qt4-webkit-4.10.2... done
1813Installing py27-qt4-xml-4.10.2,1... done
1814Installing py27-qt4-network-4.10.2,1... done
1815Installing py27-qt4-phonon-4.10.2... done
1816Installing py27-qt4-svg-4.10.2,1... done
1817Installing py27-qt4-script-4.10.2,1... done
1818Installing py27-qt4-designer-4.10.2,1... done
1819Installing py27-qt4-declarative-4.10.2... done
1820Installing py27-qt4-dbussupport-4.10.2... done
1821Installing py27-pykde4-4.10.5...Installing py27-qt4-sql-4.10.2,1... done
1822 done
1823 done
1824Installing libkonq-4.10.5... done
1825Installing konsole-4.10.5... done
1826Installing kde-workspace-4.10.5...Installing kactivitymanagerd-4.10.5... done
1827Installing gstreamer-plugins-pango-0.10.36_1,3... done
1828Installing kde4-wallpapers-freebsd-1.0... done
1829Installing kde-wallpapers-4.10.5... done
1830Installing kde-base-artwork-4.10.5... done
1831Installing polkit-kde-0.99.1... done
1832Installing ksysguardd-4.10.5... done
1833Installing kcm-polkit-kde-0.0.20121008... done
1834Installing pam_kde-1.0... done
1835Installing libdvdread-4.2.0_2... done
1836Installing libdca-0.0.5... done
1837Installing gstreamer-plugins-xvid-0.10.23,3... done
1838Installing gstreamer-plugins-ugly-0.10.19,3... done
1839Installing gstreamer-plugins-theora-0.10.36,3... done
1840Installing gstreamer-plugins-dvd-0.10.19,3... done
1841Installing gstreamer-plugins-dts-0.10.23,3... done
1842Installing gstreamer-plugins-core-0.10_13...Installing gstreamer-ffmpeg-0.10.13_1... done
1843Installing gstreamer-plugins-libpng-0.10.31,3... done
1844Installing liba52-0.7.4_2... done
1845Installing gstreamer-plugins-vorbis-0.10.36,3...Installing gstreamer-plugins-ogg-0.10.36,3... done
1846 done
1847Installing gstreamer-plugins-mp3-0.10.0_1...Installing gstreamer-plugins-mad-0.10.19,3... done
1848 done
1849Installing gstreamer-plugins-a52dec-0.10.19,3... done
1850 done
1851Installing kde4-xdg-env-1.0.1... done
1852Installing libqalculate-0.9.7_2...Installing cln-1.3.2... done
1853 done
1854Installing gpsd-3.9... done
1855===> Creating users and/or groups.
1856Creating group 'kdm' with gid '147'.
1857Creating user 'kdm' with uid '147'.
1858 done
1859Installing kde-runtime-4.10.5...Installing libssh-0.5.2_1... done
1860Installing openslp-1.2.1_3... done
1861Installing cagibi-0.2.0... done
1862 done
1863Installing kde-baseapps-4.10.5...Installing tidy-lib-090315.c_1... done
1864Installing nepomuk-widgets-4.10.5... done
1865 done
1866Installing kde4-style-qtcurve-1.8.14... done
1867Installing kde4-windeco-nitrogen-3.3.3_4... done
1868Installing gtk-qt-engine-1.1_9... done
1869Installing ktimer-4.10.5... done
1870Installing neon29-0.29.6_4... done
1871Installing py27-qt4-xmlpatterns-4.10.2... done
1872Installing sweeper-4.10.5... done
1873Installing lineakd-0.9_2... done
1874Installing kfloppy-4.10.5... done
1875Installing kdf-4.10.5... done
1876Installing kdeadmin-4.10.5... done
1877Installing k3b-2.0.2_12...Installing ffmpeg-0.7.15,1... done
1878Installing musepack-2009.03.01_1... done
1879Installing libmusicbrainz-5.0.1... done
1880Installing libkcddb-4.10.5... done
1881 done
1882Installing filelight-4.10.5... done
1883Installing qca-ossl-2.0.0.b3_4... done
1884Installing kwallet-4.10.5... done
1885Installing kgpg-4.10.5... done
1886Installing print-manager-4.10.5... done
1887Installing qoauth-1.0.1... done
1888Installing py27-qt4-multimedia-4.10.2... done
1889Installing py27-qt4-doc-4.10.2,1... done
1890Installing py27-qt4-demo-4.10.2,1... done
1891Installing kdeutils-4.10.5...Installing kcalc-4.10.5... done
1892Installing libftdi-0.20... done
1893Installing superkaramba-4.10.5... done
1894Installing kcharselect-4.10.5... done
1895Installing lirc-0.9.0_4,1... done
1896Installing kremotecontrol-4.10.5... done
1897Installing ark-4.10.5... done
1898 done
1899Installing djbfft-0.76_2... done
1900Installing libkipi-4.10.5... done
1901Installing libkexiv2-4.10.5... done
1902Installing ksnapshot-4.10.5... done
1903Installing ruby19-krossruby-4.10.5... done
1904Installing qt4-libQtAssistantClient-4.6.3_1... done
1905Installing py27-qt4-test-4.10.2,1... done
1906Installing py27-qt4-scripttools-4.10.2,1... done
1907Installing py27-qt4-qscintilla2-2.7.2,1... done
1908Installing py27-qt4-help-4.10.2... done
1909Installing py27-qt4-designerplugin-4.10.2_1,1... done
1910Installing py27-qt4-dbus-4.10.2,1... done
1911Installing py27-qt4-assistant-4.10.2,1... done
1912Installing py27-qt4-4.10.2... done
1913Installing py27-pykdeuic4-4.10.5... done
1914Installing py27-krosspython-4.10.5... done
1915Installing p5-perlqt-4.10.5... done
1916Installing p5-perlkde-4.10.5... done
1917Installing kdebindings-4.10.5... done
1918Installing plasma-applet-simpleweatherforecast-1.3_4... done
1919Installing plasma-applet-panelspacer-0.2_8... done
1920Installing plasma-applet-daisy-0.0.4.26... done
1921Installing kdeplasma-addons-4.10.5...Installing marble-4.10.5... done
1922 done
1923Installing virtuoso-6.1.6_1...===> Creating users and/or groups.
1924Creating group 'virtuoso' with gid '79'.
1925Creating user 'virtuoso' with uid '79'.
1926 done
1927 done
1928======================================================================
1929
1930You'll have to install databases/virtuoso to use Soprano's Virtuoso
1931backend.
1932
1933======================================================================
1934======================================================================
1935
1936Due to severe instability, the Solid UPnP backend was disabled. Thus,
1937you will not get notifications about networked shares in the device
1938notifier. The UPnP functionality can be re-enabled by setting the
1939SOLID_UPNP environment variable:
1940
1941$ cat > ~/.kde4/env/upnp.sh << EOF
1942SOLID_UPNP=1
1943export SOLID_UPNP
1944EOF
1945$ chmod +x ~/.kde4/env/upnp.sh
1946
1947======================================================================
1948
1949You can use sasldb2 for authentication, to add users use:
1950
1951        saslpasswd2 -c username
1952
1953If you want to enable SMTP AUTH with the system Sendmail, read
1954Sendmail.README
1955
1956NOTE: This port has been compiled with a default pwcheck_method of
1957      auxprop.  If you want to authenticate your user by /etc/passwd,
1958      PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and
1959      set sasl_pwcheck_method to saslauthd after installing the
1960      Cyrus-IMAPd 2.X port.  You should also check the
1961      /usr/local/lib/sasl2/*.conf files for the correct
1962      pwcheck_method.
1963You have built the Boost library with thread support.
1964
1965Don't forget to add -pthread to your linker options when
1966linking your code.
1967************************************************************************
1968
1969Remember to run mysql_upgrade the first time you start the MySQL server
1970after an upgrade from an earlier version.
1971
1972************************************************************************
1973===========================================================
1974
1975To use Ruby bindings outside KDE session set RUBYLIB
1976environment variable:
1977
1978RUBYLIB=/usr/local/lib/ruby/site_ruby/1.9:/usr/local/lib/ruby/site_ruby/1.9/amd64-freebsd9
1979
1980See "man 1 ruby" for details.
1981
1982===========================================================
1983======================================================================
1984
1985To enable KDE Display Manager (KDM), add kdm4_enable="YES" to
1986rc.conf(5). To get full functionality you also need procfs(5) mounted.
1987
1988If sysutils/upower is installed, backlight management support requires
1989acpi_video(4) to be loaded.
1990
1991======================================================================
1992Make sure that your floppy disk is not mounted. KFloppy cannot format
1993a mounted floppy disk.
1994Notes for FreeBSD 7.x and onwards users:
19951. The FreeBSD k3b port supports SCSI drives only. If you have IDE CD or DVD
1996   drives, use them through the cam system. See Chapter 18.6.9 of the handbook
1997   (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html#ATAPICAM)
19982. k3b has to be started from a root console, which is not recommended.
1999   Alternatively, do ALL of the following:
2000   a. Set the suid flag on cdrecord and cdrdao. The 'Notes' chapter of
2001      'man cdrecord' discusses this.
2002   b. Set the vfs.usermount sysctl variable to 1.
2003        # sysctl vfs.usermount=1
2004      Add the line vfs.usermount=1 to /etc/sysctl.conf
2005      Note that this has negative security implications
2006   c. Every user must have read and write access to /dev/cdX:
2007      - add to your /etc/devfs.rules under '[system=10]':
2008          add path 'cd*' mode 666
2009      - or if you prefer allow access for a group XXX only add instead:
2010          add path 'cd*' mode 660 group XXX
2011      - to enable it, add to your /etc/rc.conf a
2012          devfs_system_ruleset="system"
2013   d. Every user who should be able to use k3b must have read and write access
2014      to all pass through devices connected with CD and DVD drives and to the
2015      /dev/xpt0 device. Run 'camcontrol devlist' to identify those devices (seek
2016      string 'passX' at the end of each line). Note, that this is a security
2017      leak as well but that there is no alternative!
2018      - add to your /etc/devfs.rules under '[system=10]':
2019          add path 'pass*' mode 666
2020          add path 'xpt0' mode 666
2021      - or if you prefer allow access for a group XXX only add instead:
2022          add path 'pass*' mode 660 group XXX
2023          add path 'xpt0' mode 660 group XXX
2024      - to enable it, add to your /etc/rc.conf
2025          devfs_system_ruleset="system"
2026      - to apply these changes without reboot, run as root:
2027          /etc/rc.d/devfs restart
20283. Check, that DMA is activated for atapi devices: 'sysctl hw.ata.atapi_dma'
2029   If not, set it to 1 and put 'hw.ata.atapi_dma=1' into /boot/loader.conf.
20304. Create a directory on a partition, which has enough disk space to hold a CDs
2031   or DVDs content (usually below /usr). Enter this directory in Settings->
2032   Configure K3b...->Misc.
2033**********************************************************************
2034This port does not contain any FreeBSD device drivers for infrared
2035devices. This port installs the LIRC daemons and tools for interacting
2036with drivers that support the LIRC device interface.
2037
2038You will need to obtain third party device drivers or port the Linux
2039drivers in ${WRKSRC}/drivers to use the LIRC port.
2040
2041Update for 0.9:  Known working with this update are FTDI-based USB
2042IR receivers/transmitters like described here,
2043
2044        http://www.huitsing.nl/irftdi/
2045
2046and if you use the recent multimedia/webcamd port then MCE USB based
2047ones driven by the Linux mceusb driver as well remotes coming with
2048USB DVB tuners that by default work with the Linux drivers used in
2049webcamd should also work, i.e. if webcamd creates a /dev/lircX
2050device node check if e.g.
2051
2052        mode2 -d /dev/lirc0
2053
2054reports pulses and spaces when triggering the remote at the receiver,
2055if it does you probably will be able to use lirc.
2056
2057Some other userland drivers will probably also work (like others
2058using libusb), they just were not tested.
2059
2060The lirc documentation should be accessible at:
2061
2062        /usr/local/share/doc/lirc/html/index.html
2063
2064Some example configs should have been installed here:
2065
2066        /usr/local/share/examples/lirc/remotes
2067
2068The port now installs an example lircd.conf that's preconfigured
2069for use with webcamd, either with USB DVB tuner remotes supported
2070by the Linux drivers by default that webcamd uses, or for remotes
2071supplied with MCE USB IR receivers.  If you want to create a config
2072for a different remote using an IR receiver that works with mode2
2073you can try using irrecord like described here:
2074
2075        file:///usr/local/share/doc/lirc/html/help.html#new_remote
2076
2077Update for webcamd >= 3.0.0.1:
2078
2079webcamd 3.0.0.1 now supports /dev/input/eventX (X there can be for
2080example 0, 8, 16 etc) and uses it exclusively for almost all tuners,
2081only mceusb IR-only devices now support both interfaces.  So if you
2082don't get a /dev/lircX device node anymore and want to make lirc
2083use a remote with such a tuner you now need the lirc devinput driver,
2084if you start lircd via the rc.d script set lircd_flags and lircd_device
2085in rc.conf(5), like:
2086
2087        lircd_flags="-H devinput"
2088        lircd_device="/dev/input/event0"
2089
2090The example lircd.conf includes the devinput config file too so if
2091all goes well irw(1) should still work with such tuners and show
2092buttons pressed, and if not and the tuner's Linux driver uses the
2093rc.core interface you can often still add a custom keymap, only
2094with devinput you no longer want to use irrecord(1) but ir-keytable(1)
2095which is part of the multimedia/v4l-utils port.  Using that tool
2096you can e.g. check remote events coming in on /dev/input/eventX,
2097
2098        ir-keytable -d /dev/input/eventX -t
2099
2100list the current keytable,
2101
2102        ir-keytable -d /dev/input/eventX -r
2103
2104or add scancodes on the fly by loading a custom keymap,
2105
2106        ir-keytable -d /dev/input/eventX -w keymap.txt
2107
2108(on Linux this can be automated using udev, don't know if we need
2109something like that also...)  Some (Linux-centric, so not all of
2110them apply) notes re ir-keytable(1) and the lirc devinput change
2111are also here:
2112
2113        http://forum.xbmc.org/showthread.php?t=101151
2114
2115**********************************************************************
2116===========================================================
2117
2118To use Perl bindings outside KDE session set PERL5LIB
2119environment variable:
2120
2121PERL5LIB=/usr/local/lib/perl5/site_perl/5.14/mach: /usr/local/lib/perl5/site_perl/5.14
2122
2123See "man 1 perlrun" for details.
2124
2125===========================================================
2126Running chroot command: pkg info -e pcbsd-meta-kde-accessibility-1366133527.txz
2127Installing package: pcbsd-meta-kde-accessibility-1366133527.txz
2128Installing pcbsd-meta-kde-accessibility-1366133527...Installing dotconf-1.3... done
2129Installing portaudio-18.1_3... done
2130Installing nas-1.9.3... done
2131Installing flite-1.4... done
2132Installing festvox-rab16-1.4.1_2...Installing festlex-poslex-1.4.1_2... done
2133Installing festlex-oald-1.4.1_1...Installing festival-1.96_3... done
2134 done
2135 done
2136Installing festvox-ked16-1.4.0_1...Installing festlex-cmu-1.95... done
2137 done
2138Installing festvox-kal16-1.4.0... done
2139Installing festvox-el11-1.4.0_2... done
2140Installing festvox-don-1.4.0_2... done
2141Installing festvox-czech-0.1...Installing festlex-czech-0.2.1... done
2142 done
2143Installing espeak-1.47.11... done
2144Installing speech-dispatcher-0.7.1_3... done
2145Installing kmouth-4.10.5... done
2146Installing kmousetool-4.10.5... done
2147Installing kmag-4.10.5... done
2148Installing kdeaccessibility-4.10.5...Installing kaccessible-4.10.5... done
2149Installing jovie-4.10.5... done
2150 done
2151 done
2152**************************************************
2153**************************************************
2154NOTE:
2155
2156Be sure to create a /usr/local/etc/nasd.conf file; use
2157/usr/local/etc/nasd.conf.eg as a starting point.
2158It should work fine as is.
2159
2160**************************************************
2161**************************************************
2162**************************************************************************
2163* You need to install at least one festvox-* package before festival can *
2164* do anything other than mumble silently to itself.  See the festival    *
2165* package description, the festdoc package (share/doc/festival/*),       *
2166* or the festival home page for more information.                        *
2167**************************************************************************
2168======================================================================
2169
2170To enable text-to-speech system, you first need to start
2171speech-dispatcher and Jovie (locally):
2172
2173$ speech-dispatcher
2174$ jovie
2175
2176You may want to launch them via the KDE autostart module.
2177
2178======================================================================
2179Running chroot command: pkg info -e pcbsd-meta-kde-artwork-1366133527.txz
2180Installing package: pcbsd-meta-kde-artwork-1366133527.txz
2181Installing pcbsd-meta-kde-artwork-1366133527...Installing kdeartwork-4.10.5... done
2182Installing kde4-style-skulpture-0.2.3_6... done
2183Installing kde4-style-polyester-2.0.0_6... done
2184Installing kde4-style-nitrogen-1.0.5_4... done
2185 done
2186Running chroot command: pkg info -e pcbsd-meta-kde-graphics-1366133527.txz
2187Installing package: pcbsd-meta-kde-graphics-1366133527.txz
2188Installing pcbsd-meta-kde-graphics-1366133527...Installing kgamma-4.10.5... done
2189Installing wxgtk2-unicode-2.8.12_2...Installing wxgtk2-common-2.8.12_2...Installing pangox-compat-0.0.2... done
2190Installing libmspack-0.3... done
2191 done
2192 done
2193Installing sg3_utils-1.36... done
2194Installing hdf5-1.8.9... done
2195Installing libmediawiki-3.2.0... done
2196Installing libkvkontakte-3.2.0... done
2197Installing gstreamer-qt4-0.10.2_2... done
2198Installing gsl-1.15_1... done
2199Installing fftw3-float-3.3.3_1... done
2200Installing openjdk6-b27_6...Installing javavmwrapper-2.4_3... done
2201Installing java-zoneinfo-2013.d... done
2202 done
2203Installing vigra-1.9.0_2... done
2204Installing skanlite-1.0...Installing libksane-4.10.5... done
2205 done
2206Installing plotutils-2.6_3,1... done
2207Installing panomatic-0.9.4... done
2208Installing p5-Image-ExifTool-9.04... done
2209Installing opencv-2.3.1_7... done
2210Installing libpgf-6.12.24... done
2211Installing libpano13-2.9.18_1... done
2212Installing libkipiplugins-3.2.0...Installing libkdcraw-4.10.5... done
2213 done
2214Installing libkface-3.2.0... done
2215Installing libgphoto2-2.4.14_3...Installing libexif-0.6.21... done
2216 done
2217Installing lensfun-0.2.7... done
2218Installing ksaneplugin-4.10.5... done
2219Installing kphotoalbum-4.4... done
2220Installing kolourpaint-4.10.5... done
2221Installing kipi-plugins-3.2.0,1...Installing kipi-plugin-yandexfotki-3.2.0... done
2222Installing kipi-plugin-vkontakte-3.2.0... done
2223Installing kipi-plugin-videoslideshow-3.2.0... done
2224Installing kipi-plugin-timeadjust-3.2.0... done
2225Installing kipi-plugin-smug-3.2.0... done
2226Installing kipi-plugin-shwup-3.2.0... done
2227Installing kipi-plugin-sendimages-3.2.0... done
2228Installing kipi-plugin-removeredeyes-3.2.0... done
2229Installing kipi-plugin-rawconverter-3.2.0... done
2230Installing kipi-plugin-rajceexport-3.2.0... done
2231Installing kipi-plugin-printimages-3.2.0... done
2232Installing kipi-plugin-piwigoexport-3.2.0... done
2233Installing kipi-plugin-picasawebexport-3.2.0... done
2234Installing kipi-plugin-photolayoutseditor-3.2.0... done
2235Installing kipi-plugin-panorama-3.2.0... done
2236Installing kipi-plugin-metadataedit-3.2.0... done
2237Installing kipi-plugin-mediawiki-3.2.0... done
2238Installing kipi-plugin-kopete-3.2.0... done
2239Installing kipi-plugin-kmlexport-3.2.0... done
2240Installing kipi-plugin-kioexport-3.2.0... done
2241Installing kipi-plugin-jpeglossless-3.2.0... done
2242Installing kipi-plugin-ipodexport-3.2.0...Installing libplist-1.10... done
2243Installing usbmuxd-1.0.8... done
2244Installing libimobiledevice-1.1.5... done
2245Installing libgpod-0.8.2_2... done
2246 done
2247Installing kipi-plugin-imgurexport-3.2.0... done
2248Installing kipi-plugin-imageviewer-3.2.0... done
2249Installing kipi-plugin-imageshackexport-3.2.0... done
2250Installing kipi-plugin-htmlexport-3.2.0... done
2251Installing kipi-plugin-gpssync-3.2.0...Installing libkgeomap-3.2.0... done
2252 done
2253Installing kipi-plugin-galleryexport-3.2.0... done
2254Installing kipi-plugin-flickrexport-3.2.0... done
2255Installing kipi-plugin-flashexport-3.2.0... done
2256Installing kipi-plugin-facebook-3.2.0... done
2257Installing kipi-plugin-expoblending-3.2.0... done
2258Installing kipi-plugin-dngconverter-3.2.0... done
2259Installing kipi-plugin-debianscreenshots-3.2.0... done
2260Installing kipi-plugin-calendar-3.2.0... done
2261Installing kipi-plugin-batchprocess-3.2.0... done
2262Installing kipi-plugin-advancedslideshow-3.2.0... done
2263Installing kipi-plugin-acquireimages-3.2.0... done
2264Installing digikam-l10n-3.2.0... done
2265Installing digikam-doc-3.2.0... done
2266 done
2267Installing kiconedit-4.4.0_2... done
2268Installing kdegraphics-thumbnailers-4.10.5... done
2269Installing kdegraphics-svgpart-4.10.5... done
2270Installing kdegraphics-strigi-analyzer-4.10.5... done
2271Installing kdegraphics-mobipocket-4.10.5... done
2272Installing kdegraphics-4.10.5...Installing kcolorchooser-4.10.5... done
2273Installing kamera-4.10.5... done
2274Installing gwenview-4.10.5... done
2275Installing kruler-4.10.5... done
2276 done
2277Installing kcoloredit-2.0.0.4.4.0_2... done
2278Installing hugin-2012.0.0...Installing glew-1.10.0... done
2279Installing enblend-4.1.1... done
2280Installing autopano-sift-C-2.5.1_3... done
2281Installing gmake-3.82_1... done
2282 done
2283Installing digikam-3.2.0_1,1... done
2284 done
2285======================================================================
2286
2287This OpenJDK implementation requires fdescfs(5) mounted on /dev/fd and
2288procfs(5) mounted on /proc.
2289
2290If you have not done it yet, please do the following:
2291
2292        mount -t fdescfs fdesc /dev/fd
2293        mount -t procfs proc /proc
2294
2295To make it permanent, you need the following lines in /etc/fstab:
2296
2297        fdesc   /dev/fd         fdescfs         rw      0       0
2298        proc    /proc           procfs          rw      0       0
2299
2300======================================================================
2301Running chroot command: pkg info -e pcbsd-meta-kde-l10n-1366133527.txz
2302Installing package: pcbsd-meta-kde-l10n-1366133527.txz
2303Installing pcbsd-meta-kde-l10n-1366133527...Installing vi-kde-l10n-4.10.5... done
2304Installing uk-kde-l10n-4.10.5... done
2305Installing ru-kde-l10n-4.10.5... done
2306Installing pt_BR-kde-l10n-4.10.5... done
2307Installing pt-kde-l10n-4.10.5... done
2308Installing pl-kde-l10n-4.10.5... done
2309Installing wa-kde-l10n-4.10.5... done
2310Installing ug-kde-l10n-4.10.5... done
2311Installing tr-kde-l10n-4.10.5... done
2312Installing th-kde-l10n-4.10.5... done
2313Installing tg-kde-l10n-4.10.5... done
2314Installing sv-kde-l10n-4.10.5... done
2315Installing sr-kde-l10n-4.10.5... done
2316Installing sl-kde-l10n-4.10.5... done
2317Installing sk-kde-l10n-4.10.5... done
2318Installing si-kde-l10n-4.10.5... done
2319Installing ro-kde-l10n-4.10.5... done
2320Installing pa-kde-l10n-4.10.5... done
2321Installing nn-kde-l10n-4.10.5... done
2322Installing nl-kde-l10n-4.10.5... done
2323Installing nds-kde-l10n-4.10.5... done
2324Installing nb-kde-l10n-4.10.5... done
2325Installing mr-kde-l10n-4.10.5... done
2326Installing lv-kde-l10n-4.10.5... done
2327Installing lt-kde-l10n-4.10.5... done
2328Installing km-kde-l10n-4.10.5... done
2329Installing kk-kde-l10n-4.10.5... done
2330Installing it-kde-l10n-4.10.5... done
2331Installing is-kde-l10n-4.10.5... done
2332Installing ia-kde-l10n-4.10.5... done
2333Installing hr-kde-l10n-4.10.5... done
2334Installing hi-kde-l10n-4.10.5... done
2335Installing gl-kde-l10n-4.10.5... done
2336Installing ga-kde-l10n-4.10.5... done
2337Installing fi-kde-l10n-4.10.5... done
2338Installing fa-kde-l10n-4.10.5... done
2339Installing eu-kde-l10n-4.10.5... done
2340Installing et-kde-l10n-4.10.5... done
2341Installing es-kde-l10n-4.10.5... done
2342Installing en_GB-kde-l10n-4.10.5... done
2343Installing el-kde-l10n-4.10.5... done
2344Installing da-kde-l10n-4.10.5... done
2345Installing cs-kde-l10n-4.10.5... done
2346Installing ca_valencia-kde-l10n-4.10.5... done
2347Installing ca-kde-l10n-4.10.5... done
2348Installing bs-kde-l10n-4.10.5... done
2349Installing bg-kde-l10n-4.10.5... done
2350Installing kde-l10n-4.10.5...Installing ko-kde-l10n-4.10.5... done
2351Installing ja-kde-l10n-4.10.5... done
2352Installing hu-kde-l10n-4.10.5... done
2353Installing he-kde-l10n-4.10.5... done
2354Installing de-kde-l10n-4.10.5... done
2355Installing fr-kde-l10n-4.10.5... done
2356Installing zh_TW-kde-l10n-4.10.5... done
2357Installing zh_CN-kde-l10n-4.10.5... done
2358Installing ar-kde-l10n-4.10.5... done
2359 done
2360 done
2361Running chroot command: pkg info -e pcbsd-meta-kde-multimedia-1366133527.txz
2362Installing package: pcbsd-meta-kde-multimedia-1366133527.txz
2363Installing pcbsd-meta-kde-multimedia-1366133527...Installing kio-upnp-ms-1.0.0.g20110808_2... done
2364Installing loudmouth-1.4.3_7... done
2365Installing kdemultimedia-ffmpegthumbs-4.10.5... done
2366Installing kdemultimedia-4.10.5...Installing dragon-4.10.5... done
2367Installing libmusicbrainz-3.0.3_2...Installing libdiscid-0.2.2_1... done
2368 done
2369Installing libkcompactdisc-4.10.5... done
2370Installing kscd-4.10.5... done
2371Installing kmix-4.10.5... done
2372Installing kio-audiocd-4.10.5... done
2373Installing juk-4.10.5... done
2374 done
2375Installing qtscriptgenerator-0.2.0_1... done
2376Installing taglib-extras-1.0.1... done
2377Installing libofa-0.9.3_8... done
2378Installing libmtp-1.1.6_1... done
2379Installing liblastfm-1.0.6... done
2380Installing amarok-2.7.0_2... done
2381 done
2382======================================================================
2383
2384To be able to play audio and video streams with Phonon-GStreamer,
2385you'll need to have the appropriate GStreamer plugins installed.
2386multimedia/gstreamer-plugins-core will install a standard set, while
2387multimedia/gstreamer-plugins-all will let you choose among all of
2388them.
2389
2390======================================================================
2391======================================================================
2392
2393In order to use certain devices (MTP, iPod...) with Amarok you need to
2394be able to mount USB devices as the user running Amarok. If HAL
2395automount doesn't work, read more on how to set this up on FreeBSD
2396here:
2397http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/usb-disks.html
2398
2399If you are not running a full KDE workspace, you should consider
2400installing a Phonon backend (multimedia/phonon-gstreamer or
2401multimedia/phonon-vlc) to get audio playback.
2402
2403======================================================================
2404Running chroot command: pkg info -e pcbsd-meta-kde-network-1366133527.txz
2405Installing package: pcbsd-meta-kde-network-1366133527.txz
2406Installing pcbsd-meta-kde-network-1366133527...Installing p5-XML-SAX-Base-1.08... done
2407Installing p5-XML-SAX-0.99...Installing p5-XML-NamespaceSupport-1.11... done
2408 done
2409Installing p5-XML-LibXML-2.0018,1... done
2410Installing libotr-3.2.1_1... done
2411Installing pl-libgadu-1.11.2,1... done
2412Installing linphone-base-3.2.1_2,1...Installing libosip-3.6.0... done
2413Installing libeXosip2-3.6.0... done
2414Installing gsm-1.0.13... done
2415 done
2416Installing libmms-0.6.2... done
2417Installing krfb-4.10.5...Installing telepathy-qt4-0.9.3...Installing telepathy-glib-0.20.2...Installing vala-vapigen-0.20.1...Installing vala-0.20.1... done
2418 done
2419 done
2420Installing telepathy-farsight-0.0.19...Installing libnice-0.1.3... done
2421Installing farsight2-0.0.31...Installing py27-gstreamer-0.10.22_1... done
2422 done
2423 done
2424 done
2425 done
2426Installing krdc-4.10.5... done
2427Installing kdenetwork-4.10.5...Installing ilbc-r3951... done
2428Installing libktorrent-1.3.1_2... done
2429Installing meanwhile-1.0.2_3... done
2430Installing libmsn-4.2.1... done
2431Installing kopete-4.10.5...Installing msilbc-2.0.3... done
2432 done
2433 done
2434Installing ktorrent-4.3.1_1... done
2435Installing konversation-1.4_2... done
2436 done
2437Running chroot command: pkg info -e pcbsd-meta-kde-pim-1366133527.txz
2438Installing package: pcbsd-meta-kde-pim-1366133527.txz
2439Installing pcbsd-meta-kde-pim-1366133527...Installing xerces-c3-3.1.1_1... done
2440Installing libkolabxml-0.8.4_1... done
2441Installing libkolab-0.4.2... done
2442Installing libkgapi-0.4.4... done
2443Installing grantlee-0.3.0... done
2444Installing libgcal-0.9.6_1... done
2445Installing kdepim-runtime-4.10.5... done
2446Installing kdepim-4.10.5... done
2447Installing akonadi-googledata-1.2.0_2... done
2448 done
2449Running chroot command: pkg info -e pcbsd-meta-nvidia-1366133527.txz
2450Installing package: pcbsd-meta-nvidia-1366133527.txz
2451Installing pcbsd-meta-nvidia-1366133527...Installing nvidia-xconfig-310.14... done
2452Installing nvidia-settings-310.14... done
2453Installing nvidia-driver-319.32... done
2454 done
2455To use these drivers, make sure that you have loaded the NVidia kernel
2456module, by doing
2457
2458        # kldload nvidia
2459
2460or adding
2461
2462        nvidia_load="YES"
2463
2464to your /boot/loader.conf.
2465
2466If you build this port with FreeBSD AGP GART driver, make sure you have
2467agp.ko kernel module installed and loaded, since nvidia.ko will depend
2468on it, or have your kernel compiled with "device agp".  Otherwise, the
2469NVidia kernel module will not load.  Also, please set correct value for
2470``Option "NvAGP"'' in ``Device'' section of your X11 configuration file.
2471
2472When building with Linux compatibility support, make sure that linux.ko
2473module is available as well (or have it compiled in kernel).  It can be
2474loaded via /boot/loader.conf, or later in the boot process if you add
2475
2476        linux_enable="YES"
2477
2478to your /etc/rc.conf.
2479
2480If X.org cannot start and reports
2481
2482        (EE) NVIDIA(0): Failed to obtain a shared memory identifier.
2483
2484in /var/log/Xorg.0.log while actually you have ``options SYSVSHM''
2485enabled in kernel, the sysctl ``kern.ipc.shmall'' should be increased.
2486
2487See /usr/local/share/doc/NVIDIA_GLX-1.0/README for more information.
2488Package installation complete!
2489Cleaning up: /mnt/usr/.pkgtmp
2490Running: cd /dev
2491Running: umount /mnt/usr/.pkgtmp
2492Running: rmdir /mnt/usr/.pkgtmp
2493Running chroot command: /usr/bin/cap_mkdb /etc/login.conf
2494Setting sk0 to DHCP on the system.
2495Setting ipfw0 to DHCP on the system.
2496Setting sk0 to accepting RAs on the system.
2497Setting ipfw0 to accepting RAs on the system.
2498Running chroot command: ln -s /usr/home /home
2499Setting hostname: pcbsd-1035
2500Running external command: /root/save-config.sh
2501Running chroot command: sh /usr/local/share/pcbsd/scripts/sys-init.sh desktop ru
2502Running chroot command: touch /var/.runxsetup
2503Running chroot command: touch /var/.pcbsd-firstboot
2504Running chroot command: touch /var/.pcbsd-firstgui
2505Running chroot command: newaliases
2506Running: mount -t devfs devfs /mnt/dev
2507Running: cp /root/beadm.install /mnt/root/beadm.install
2508Running: chmod 755 /mnt/root/beadm.install
2509Running: cp /boot/zfs/zpool.cache /mnt/boot/zfs/
2510Running: ln -s ../zfs /mnt/boot/kernel/zfs
2511Running: cp /etc/hostid /mnt/etc/hostid
2512Running: chroot /mnt grub-install --force /dev/ada0s3
2513/usr/local/sbin/grub-bios-setup: warning: Attempting to install GRUB to a disk with multiple partition labels.  This is not supported yet..
2514/usr/local/sbin/grub-bios-setup: error: filesystem `zfs' doesn't support blocklists.
2515EXITERROR: Error 1: chroot /mnt grub-install --force /dev/ada0s3
2516
2517# PC-SYSINSTALL CFG
2518# Auto-Generated pc-sysinstall configuration
2519installInteractive=no
2520installMode=fresh
2521installType=PCBSD
2522packageType=dist
2523distFiles=base doc games kernel lib32
2524
2525netSaveDev=AUTO-DHCP-SLAAC
2526installMedium=local
2527localPath=/dist
2528
2529localizeLang=ru
2530 
2531# Disk Setup for ada0
2532disk0=ada0
2533partition=s3
2534bootManager=GRUB-slice
2535partscheme=MBR
2536commitDiskPart
2537
2538# Partition Setup for ada0(s3)
2539# All sizes are expressed in MB
2540# Avail FS Types, UFS, UFS+S, UFS+SUJ, UFS+J, ZFS, SWAP
2541# UFS.eli, UFS+S.eli, UFS+SUJ, UFS+J.eli, ZFS.eli, SWAP.eli
2542disk0-part=ZFS 188407 /,/tmp(compress=lzjb),/usr(canmount=off),/usr/home,/usr/jails,/usr/obj(compress=lzjb),/usr/pbi,/usr/ports(compress=gzip),/usr/ports/distfiles(compress=off),/usr/src(compress=gzip),/var(canmount=off),/var/audit(compress=lzjb),/var/log(compress=gzip),/var/tmp(compress=lzjb)
2543disk0-part=SWAP 16385 none
2544commitDiskLabel
2545
2546runExtCommand=/root/save-config.sh
2547
2548installPackages=pcbsd-base pcbsd-meta-kde pcbsd-meta-kde-accessibility pcbsd-meta-kde-artwork pcbsd-meta-kde-graphics pcbsd-meta-kde-l10n pcbsd-meta-kde-multimedia pcbsd-meta-kde-network pcbsd-meta-kde-pim pcbsd-meta-nvidia
2549
2550runCommand=sh /usr/local/share/pcbsd/scripts/sys-init.sh desktop ru
2551# Touch flags to enable PC-BSD setup at first boot
2552runCommand=touch /var/.runxsetup
2553runCommand=touch /var/.pcbsd-firstboot
2554runCommand=touch /var/.pcbsd-firstgui
2555runCommand=newaliases
2556
2557# DMESG OUTPUT
2558Copyright (c) 1992-2012 The FreeBSD Project.
2559Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
2560        The Regents of the University of California. All rights reserved.
2561FreeBSD is a registered trademark of The FreeBSD Foundation.
2562FreeBSD 9.1-RELEASE #0 r243825: Tue Dec  4 09:23:10 UTC 2012
2563    root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
2564CPU: Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz (3000.07-MHz K8-class CPU)
2565  Origin = "GenuineIntel"  Id = 0x6fb  Family = 6  Model = f  Stepping = 11
2566  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
2567  Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
2568  AMD Features=0x20000800<SYSCALL,LM>
2569  AMD Features2=0x1<LAHF>
2570  TSC: P-state invariant, performance statistics
2571real memory  = 8589934592 (8192 MB)
2572avail memory = 8244363264 (7862 MB)
2573Event timer "LAPIC" quality 400
2574ACPI APIC Table: <GBT    GBTUACPI>
2575FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
2576FreeBSD/SMP: 1 package(s) x 2 core(s)
2577 cpu0 (BSP): APIC ID:  0
2578 cpu1 (AP): APIC ID:  1
2579ioapic0: Changing APIC ID to 2
2580ioapic0 <Version 2.0> irqs 0-23 on motherboard
2581kbd1 at kbdmux0
2582acpi0: <GBT GBTUACPI> on motherboard
2583acpi0: Power Button (fixed)
2584acpi0: reservation of 0, a0000 (3) failed
2585acpi0: reservation of 100000, dfde0000 (3) failed
2586cpu0: <ACPI CPU> on acpi0
2587cpu1: <ACPI CPU> on acpi0
2588attimer0: <AT timer> port 0x40-0x43 on acpi0
2589Timecounter "i8254" frequency 1193182 Hz quality 0
2590Event timer "i8254" frequency 1193182 Hz quality 100
2591hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
2592Timecounter "HPET" frequency 14318180 Hz quality 950
2593Event timer "HPET" frequency 14318180 Hz quality 450
2594Event timer "HPET1" frequency 14318180 Hz quality 440
2595Event timer "HPET2" frequency 14318180 Hz quality 440
2596Event timer "HPET3" frequency 14318180 Hz quality 440
2597atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
2598Event timer "RTC" frequency 32768 Hz quality 0
2599Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
2600acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
2601acpi_button0: <Power Button> on acpi0
2602pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
2603pci0: <ACPI PCI bus> on pcib0
2604pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
2605pci1: <PCI bus> on pcib1
2606vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci1
2607uhci0: <Intel 82801I (ICH9) USB controller> port 0xe100-0xe11f irq 16 at device 26.0 on pci0
2608uhci0: LegSup = 0x2f00
2609usbus0 on uhci0
2610uhci1: <Intel 82801I (ICH9) USB controller> port 0xe500-0xe51f irq 21 at device 26.1 on pci0
2611uhci1: LegSup = 0x2f00
2612usbus1 on uhci1
2613uhci2: <Intel 82801I (ICH9) USB controller> port 0xe000-0xe01f irq 18 at device 26.2 on pci0
2614uhci2: LegSup = 0x2f00
2615usbus2 on uhci2
2616ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfa105000-0xfa1053ff irq 18 at device 26.7 on pci0
2617usbus3: EHCI version 1.0
2618usbus3 on ehci0
2619hdac0: <Intel 82801I HDA Controller> mem 0xfa100000-0xfa103fff irq 22 at device 27.0 on pci0
2620pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
2621pci2: <ACPI PCI bus> on pcib2
2622pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
2623pci3: <ACPI PCI bus> on pcib3
2624atapci0: <JMicron JMB363 UDMA133 controller> port 0xc000-0xc007,0xc100-0xc103,0xc200-0xc207,0xc300-0xc303,0xc400-0xc40f mem 0xfa000000-0xfa001fff irq 19 at device 0.0 on pci3
2625ahci0: <JMicron JMB363 AHCI SATA controller> at channel -1 on atapci0
2626ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
2627ahcich0: <AHCI channel> at channel 0 on ahci0
2628ahcich1: <AHCI channel> at channel 1 on ahci0
2629ata2: <ATA channel> at channel 0 on atapci0
2630pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
2631pci4: <ACPI PCI bus> on pcib4
2632uhci3: <Intel 82801I (ICH9) USB controller> port 0xe200-0xe21f irq 23 at device 29.0 on pci0
2633uhci3: LegSup = 0x2f00
2634usbus4 on uhci3
2635uhci4: <Intel 82801I (ICH9) USB controller> port 0xe300-0xe31f irq 19 at device 29.1 on pci0
2636uhci4: LegSup = 0x2f00
2637usbus5 on uhci4
2638uhci5: <Intel 82801I (ICH9) USB controller> port 0xe400-0xe41f irq 18 at device 29.2 on pci0
2639uhci5: LegSup = 0x2f00
2640usbus6 on uhci5
2641ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfa104000-0xfa1043ff irq 23 at device 29.7 on pci0
2642usbus7: EHCI version 1.0
2643usbus7 on ehci1
2644pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
2645pci5: <ACPI PCI bus> on pcib5
2646fwohci0: <VIA Fire II (VT6306)> port 0xd000-0xd07f mem 0xf9004000-0xf90047ff irq 20 at device 0.0 on pci5
2647fwohci0: OHCI version 1.0 (ROM=1)
2648fwohci0: No. of Isochronous channels is 4.
2649fwohci0: EUI64 00:08:00:08:00:08:05:a7
2650fwohci0: Phy 1394a available S400, 3 ports.
2651fwohci0: Link S400, max_rec 2048 bytes.
2652firewire0: <IEEE1394(FireWire) bus> on fwohci0
2653fwe0: <Ethernet over FireWire> on firewire0
2654if_fwe0: Fake Ethernet address: 02:08:00:08:05:a7
2655fwe0: Ethernet address: 02:08:00:08:05:a7
2656fwip0: <IP over FireWire> on firewire0
2657fwip0: Firewire address: 00:08:00:08:00:08:05:a7 @ 0xfffe00000000, S400, maxrec 2048
2658dcons_crom0: <dcons configuration ROM> on firewire0
2659dcons_crom0: bus_addr 0xdfec4000
2660fwohci0: Initiate bus reset
2661fwohci0: fwohci_intr_core: BUS reset
2662fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
2663skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xd100-0xd1ff mem 0xf9000000-0xf9003fff irq 18 at device 2.0 on pci5
2664skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
2665sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
2666sk0: Ethernet address: 00:1c:f0:0c:3d:69
2667miibus0: <MII bus> on sk0
2668e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
2669e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
2670isab0: <PCI-ISA bridge> at device 31.0 on pci0
2671isa0: <ISA bus> on isab0
2672atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f,0xfc00-0xfc0f at device 31.2 on pci0
2673ata0: <ATA channel> at channel 0 on atapci1
2674ata1: <ATA channel> at channel 1 on atapci1
2675pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
2676atapci2: <Intel ICH9 SATA300 controller> port 0xe700-0xe707,0xe800-0xe803,0xe900-0xe907,0xea00-0xea03,0xeb00-0xeb0f,0xec00-0xec0f irq 19 at device 31.5 on pci0
2677ata3: <ATA channel> at channel 0 on atapci2
2678ata4: <ATA channel> at channel 1 on atapci2
2679fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
2680fd0: <1440-KB 3.5" drive> on fdc0 drive 0
2681uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
2682ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
2683ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
2684ppbus0: <Parallel port bus> on ppc0
2685plip0: <PLIP network interface> on ppbus0
2686lpt0: <Printer> on ppbus0
2687lpt0: Interrupt-driven port
2688ppi0: <Parallel I/O> on ppbus0
2689atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
2690atkbd0: <AT Keyboard> irq 1 on atkbdc0
2691kbd0 at atkbd0
2692atkbd0: [GIANT-LOCKED]
2693psm0: <PS/2 Mouse> irq 12 on atkbdc0
2694psm0: [GIANT-LOCKED]
2695psm0: model IntelliMouse, device ID 3
2696sc0: <System console> at flags 0x100 on isa0
2697sc0: VGA <16 virtual consoles, flags=0x300>
2698vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
2699ctl: CAM Target Layer loaded
2700acpi_perf0: <ACPI CPU Frequency Control> on cpu0
2701p4tcc0: <CPU Frequency Thermal Control> on cpu0
2702est1: <Enhanced SpeedStep Frequency Control> on cpu1
2703est: CPU supports Enhanced Speedstep, but is not recognized.
2704est: cpu_vendor GenuineIntel, msr 92a092a0600092a
2705device_attach: est1 attach returned 6
2706p4tcc1: <CPU Frequency Thermal Control> on cpu1
2707firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
2708firewire0: bus manager 0
2709Timecounters tick every 1.000 msec
2710hdacc0: <Realtek ALC889A HDA CODEC> at cad 2 on hdac0
2711hdaa0: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc0
2712pcm0: <Realtek ALC889A (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
2713pcm1: <Realtek ALC889A (Front Analog)> at nid 27 and 25 on hdaa0
2714pcm2: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa0
2715usbus0: 12Mbps Full Speed USB v1.0
2716usbus1: 12Mbps Full Speed USB v1.0
2717usbus2: 12Mbps Full Speed USB v1.0
2718usbus3: 480Mbps High Speed USB v2.0
2719usbus4: 12Mbps Full Speed USB v1.0
2720usbus5: 12Mbps Full Speed USB v1.0
2721usbus6: 12Mbps Full Speed USB v1.0
2722usbus7: 480Mbps High Speed USB v2.0
2723ugen0.1: <Intel> at usbus0
2724uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
2725ugen1.1: <Intel> at usbus1
2726uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
2727ugen2.1: <Intel> at usbus2
2728uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
2729ugen3.1: <Intel> at usbus3
2730uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
2731ugen4.1: <Intel> at usbus4
2732uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
2733ugen5.1: <Intel> at usbus5
2734uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
2735ugen6.1: <Intel> at usbus6
2736uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
2737ugen7.1: <Intel> at usbus7
2738uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
2739uhub0: 2 ports with 2 removable, self powered
2740uhub1: 2 ports with 2 removable, self powered
2741uhub2: 2 ports with 2 removable, self powered
2742uhub4: 2 ports with 2 removable, self powered
2743uhub5: 2 ports with 2 removable, self powered
2744uhub6: 2 ports with 2 removable, self powered
2745uhub3: 6 ports with 6 removable, self powered
2746uhub7: 6 ports with 6 removable, self powered
2747ada0 at ata0 bus 0 scbus3 target 0 lun 0
2748ada0: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA-8 SATA 3.x device
2749ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
2750ada0: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C)
2751ada0: Previously was known as ad0
2752ada1 at ata1 bus 0 scbus4 target 0 lun 0
2753ada1: <ST3500320NS SN04> ATA-6 SATA 2.x device
2754ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
2755ada1: 476938MB (976771055 512 byte sectors: 16H 63S/T 16383C)
2756ada1: Previously was known as ad2
2757SMP: AP CPU #1 Launched!
2758Timecounter "TSC-low" frequency 11719007 Hz quality 1000
2759cd0 at ata3 bus 0 scbus5 target 0 lun 0
2760cd0: <PIONEER DVD-RW  DVR-215D 1.13> Removable CD-ROM SCSI-0 device
2761cd0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
2762cd0: cd present [1769130 x 2048 byte records]
2763Trying to mount root from ufs:/dev/ada0s2a [rw]...
2764sk0: link state changed to UP
2765Waiting (max 60 seconds) for system process `vnlru' to stop...done
2766Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
2767Waiting (max 60 seconds) for system process `syncer' to stop...
2768Syncing disks, vnodes remaining...5 2 2 0 1 0 0 done
2769All buffers synced.
2770Uptime: 2m48s
2771usbus0: Controller shutdown
2772uhub0: at usbus0, port 1, addr 1 (disconnected)
2773usbus0: Controller shutdown complete
2774usbus1: Controller shutdown
2775uhub1: at usbus1, port 1, addr 1 (disconnected)
2776usbus1: Controller shutdown complete
2777usbus2: Controller shutdown
2778uhub2: at usbus2, port 1, addr 1 (disconnected)
2779usbus2: Controller shutdown complete
2780usbus3: Controller shutdown
2781uhub3: at usbus3, port 1, addr 1 (disconnected)
2782usbus3: Controller shutdown complete
2783usbus4: Controller shutdown
2784uhub4: at usbus4, port 1, addr 1 (disconnected)
2785usbus4: Controller shutdown complete
2786usbus5: Controller shutdown
2787uhub5: at usbus5, port 1, addr 1 (disconnected)
2788usbus5: Controller shutdown complete
2789usbus6: Controller shutdown
2790uhub6: at usbus6, port 1, addr 1 (disconnected)
2791usbus6: Controller shutdown complete
2792usbus7: Controller shutdown
2793uhub7: at usbus7, port 1, addr 1 (disconnected)
2794usbus7: Controller shutdown complete
2795Rebooting...
2796cpu_reset: Stopping other CPUs
2797Copyright (c) 1992-2012 The FreeBSD Project.
2798Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
2799        The Regents of the University of California. All rights reserved.
2800FreeBSD is a registered trademark of The FreeBSD Foundation.
2801FreeBSD 9.1-RELEASE-p19 #8 r+1bde594: Sat Aug 31 13:14:30 EDT 2013
2802    root@avenger:/usr/obj/pcbsd-build64/fbsd-source/src/sys/GENERIC amd64
2803CPU: Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz (3000.06-MHz K8-class CPU)
2804  Origin = "GenuineIntel"  Id = 0x6fb  Family = 6  Model = f  Stepping = 11
2805  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
2806  Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
2807  AMD Features=0x20000800<SYSCALL,LM>
2808  AMD Features2=0x1<LAHF>
2809  TSC: P-state invariant, performance statistics
2810real memory  = 8589934592 (8192 MB)
2811avail memory = 8244072448 (7862 MB)
2812Event timer "LAPIC" quality 400
2813ACPI APIC Table: <GBT    GBTUACPI>
2814FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
2815FreeBSD/SMP: 1 package(s) x 2 core(s)
2816 cpu0 (BSP): APIC ID:  0
2817 cpu1 (AP): APIC ID:  1
2818WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
2819ioapic0: Changing APIC ID to 2
2820ioapic0 <Version 2.0> irqs 0-23 on motherboard
2821kbd1 at kbdmux0
2822acpi0: <GBT GBTUACPI> on motherboard
2823acpi0: Power Button (fixed)
2824acpi0: reservation of 0, a0000 (3) failed
2825acpi0: reservation of 100000, dfde0000 (3) failed
2826cpu0: <ACPI CPU> on acpi0
2827cpu1: <ACPI CPU> on acpi0
2828attimer0: <AT timer> port 0x40-0x43 on acpi0
2829Timecounter "i8254" frequency 1193182 Hz quality 0
2830Event timer "i8254" frequency 1193182 Hz quality 100
2831hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
2832Timecounter "HPET" frequency 14318180 Hz quality 950
2833Event timer "HPET" frequency 14318180 Hz quality 450
2834Event timer "HPET1" frequency 14318180 Hz quality 440
2835Event timer "HPET2" frequency 14318180 Hz quality 440
2836Event timer "HPET3" frequency 14318180 Hz quality 440
2837atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
2838Event timer "RTC" frequency 32768 Hz quality 0
2839Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
2840acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
2841acpi_button0: <Power Button> on acpi0
2842pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
2843pci0: <ACPI PCI bus> on pcib0
2844pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
2845pci1: <PCI bus> on pcib1
2846vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci1
2847uhci0: <Intel 82801I (ICH9) USB controller> port 0xe100-0xe11f irq 16 at device 26.0 on pci0
2848uhci0: LegSup = 0x2f00
2849usbus0 on uhci0
2850uhci1: <Intel 82801I (ICH9) USB controller> port 0xe500-0xe51f irq 21 at device 26.1 on pci0
2851uhci1: LegSup = 0x2f00
2852usbus1 on uhci1
2853uhci2: <Intel 82801I (ICH9) USB controller> port 0xe000-0xe01f irq 18 at device 26.2 on pci0
2854uhci2: LegSup = 0x2f00
2855usbus2 on uhci2
2856ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfa105000-0xfa1053ff irq 18 at device 26.7 on pci0
2857usbus3: EHCI version 1.0
2858usbus3 on ehci0
2859hdac0: <Intel 82801I HDA Controller> mem 0xfa100000-0xfa103fff irq 22 at device 27.0 on pci0
2860pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
2861pci2: <ACPI PCI bus> on pcib2
2862pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
2863pci3: <ACPI PCI bus> on pcib3
2864atapci0: <JMicron JMB363 UDMA133 controller> port 0xc000-0xc007,0xc100-0xc103,0xc200-0xc207,0xc300-0xc303,0xc400-0xc40f mem 0xfa000000-0xfa001fff irq 19 at device 0.0 on pci3
2865ahci0: <JMicron JMB363 AHCI SATA controller> at channel -1 on atapci0
2866ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
2867ahcich0: <AHCI channel> at channel 0 on ahci0
2868ahcich1: <AHCI channel> at channel 1 on ahci0
2869ata2: <ATA channel> at channel 0 on atapci0
2870pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
2871pci4: <ACPI PCI bus> on pcib4
2872uhci3: <Intel 82801I (ICH9) USB controller> port 0xe200-0xe21f irq 23 at device 29.0 on pci0
2873uhci3: LegSup = 0x2f00
2874usbus4 on uhci3
2875uhci4: <Intel 82801I (ICH9) USB controller> port 0xe300-0xe31f irq 19 at device 29.1 on pci0
2876uhci4: LegSup = 0x2f00
2877usbus5 on uhci4
2878uhci5: <Intel 82801I (ICH9) USB controller> port 0xe400-0xe41f irq 18 at device 29.2 on pci0
2879uhci5: LegSup = 0x2f00
2880usbus6 on uhci5
2881ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfa104000-0xfa1043ff irq 23 at device 29.7 on pci0
2882usbus7: EHCI version 1.0
2883usbus7 on ehci1
2884pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
2885pci5: <ACPI PCI bus> on pcib5
2886pci5: <serial bus, FireWire> at device 0.0 (no driver attached)
2887skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xd100-0xd1ff mem 0xf9000000-0xf9003fff irq 18 at device 2.0 on pci5
2888skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
2889sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
2890sk0: Ethernet address: 00:1c:f0:0c:3d:69
2891miibus0: <MII bus> on sk0
2892e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
2893e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
2894isab0: <PCI-ISA bridge> at device 31.0 on pci0
2895isa0: <ISA bus> on isab0
2896atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f,0xfc00-0xfc0f at device 31.2 on pci0
2897ata0: <ATA channel> at channel 0 on atapci1
2898ata1: <ATA channel> at channel 1 on atapci1
2899pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
2900atapci2: <Intel ICH9 SATA300 controller> port 0xe700-0xe707,0xe800-0xe803,0xe900-0xe907,0xea00-0xea03,0xeb00-0xeb0f,0xec00-0xec0f irq 19 at device 31.5 on pci0
2901ata3: <ATA channel> at channel 0 on atapci2
2902ata4: <ATA channel> at channel 1 on atapci2
2903fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
2904fd0: <1440-KB 3.5" drive> on fdc0 drive 0
2905uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
2906ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
2907ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
2908ppbus0: <Parallel port bus> on ppc0
2909plip0: <PLIP network interface> on ppbus0
2910lpt0: <Printer> on ppbus0
2911lpt0: Interrupt-driven port
2912ppi0: <Parallel I/O> on ppbus0
2913atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
2914atkbd0: <AT Keyboard> irq 1 on atkbdc0
2915kbd0 at atkbd0
2916atkbd0: [GIANT-LOCKED]
2917psm0: <PS/2 Mouse> irq 12 on atkbdc0
2918psm0: [GIANT-LOCKED]
2919psm0: model IntelliMouse, device ID 3
2920sc0: <System console> at flags 0x100 on isa0
2921sc0: VGA <16 virtual consoles, flags=0x300>
2922vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
2923ctl: CAM Target Layer loaded
2924acpi_perf0: <ACPI CPU Frequency Control> on cpu0
2925p4tcc0: <CPU Frequency Thermal Control> on cpu0
2926est1: <Enhanced SpeedStep Frequency Control> on cpu1
2927est: CPU supports Enhanced Speedstep, but is not recognized.
2928est: cpu_vendor GenuineIntel, msr 92a092a0600092a
2929device_attach: est1 attach returned 6
2930p4tcc1: <CPU Frequency Thermal Control> on cpu1
2931Timecounters tick every 1.000 msec
2932ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging disabled
2933DUMMYNET 0xfffffe0002f99200 with IPv6 initialized (100409)
2934load_dn_sched dn_sched WF2Q+ loaded
2935load_dn_sched dn_sched FIFO loaded
2936load_dn_sched dn_sched PRIO loaded
2937load_dn_sched dn_sched QFQ loaded
2938load_dn_sched dn_sched RR loaded
2939hdacc0: <Realtek ALC889A HDA CODEC> at cad 2 on hdac0
2940hdaa0: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc0
2941pcm0: <Realtek ALC889A (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
2942pcm1: <Realtek ALC889A (Front Analog)> at nid 27 and 25 on hdaa0
2943pcm2: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa0
2944usbus0: 12Mbps Full Speed USB v1.0
2945usbus1: 12Mbps Full Speed USB v1.0
2946usbus2: 12Mbps Full Speed USB v1.0
2947usbus3: 480Mbps High Speed USB v2.0
2948usbus4: 12Mbps Full Speed USB v1.0
2949usbus5: 12Mbps Full Speed USB v1.0
2950usbus6: 12Mbps Full Speed USB v1.0
2951usbus7: 480Mbps High Speed USB v2.0
2952ugen0.1: <Intel> at usbus0
2953uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
2954ugen1.1: <Intel> at usbus1
2955uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
2956ugen2.1: <Intel> at usbus2
2957uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
2958ugen3.1: <Intel> at usbus3
2959uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
2960ugen4.1: <Intel> at usbus4
2961uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
2962ugen5.1: <Intel> at usbus5
2963uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
2964ugen6.1: <Intel> at usbus6
2965uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
2966ugen7.1: <Intel> at usbus7
2967uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
2968uhub0: 2 ports with 2 removable, self powered
2969uhub1: 2 ports with 2 removable, self powered
2970uhub2: 2 ports with 2 removable, self powered
2971uhub4: 2 ports with 2 removable, self powered
2972uhub5: 2 ports with 2 removable, self powered
2973uhub6: 2 ports with 2 removable, self powered
2974uhub3: 6 ports with 6 removable, self powered
2975uhub7: 6 ports with 6 removable, self powered
2976ada0 at ata0 bus 0 scbus3 target 0 lun 0
2977ada0: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA-8 SATA 3.x device
2978ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
2979ada0: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C)
2980ada0: Previously was known as ad0
2981ada1 at ata1 bus 0 scbus4 target 0 lun 0
2982ada1: <ST3500320NS SN04> ATA-6 SATA 2.x device
2983ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
2984ada1: 476938MB (976771055 512 byte sectors: 16H 63S/T 16383C)
2985ada1: Previously was known as ad2
2986SMP: AP CPU #1 Launched!
2987Timecounter "TSC-low" frequency 11718999 Hz quality 1000
2988cd0 at ata3 bus 0 scbus5 target 0 lun 0
2989cd0: <PIONEER DVD-RW  DVR-215D 1.13> Removable CD-ROM SCSI-0 device
2990cd0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
2991cd0: cd present [1769130 x 2048 byte records]
2992Trying to mount root from cd9660:/dev/iso9660/PCBSD_INSTALL [ro]...
2993md0.uzip: 32779 x 65536 blocks
2994cryptosoft0: <software crypto> on motherboard
2995ZFS filesystem version 5
2996ZFS storage pool version 28
2997nvidia0: <GeForce 8600 GT> on vgapci0
2998vgapci0: child nvidia0 requested pci_enable_io
2999vgapci0: child nvidia0 requested pci_enable_io
3000/var: optimization changed from SPACE to TIME
3001sk0: link state changed to DOWN
3002sk0: link state changed to UP
3003/tmp: optimization changed from SPACE to TIME
3004ugen3.2: <JetFlash> at usbus3
3005umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus3
3006umass0:  SCSI over Bulk-Only; quirks = 0x4100
3007umass0:8:0:-1: Attached to scbus8
3008da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
3009da0: <JetFlash Transcend 32GB 8.07> Removable Direct Access SCSI-4 device
3010da0: 40.000MB/s transfers
3011da0: 30624MB (62717952 512 byte sectors: 255H 63S/T 3904C)
3012
3013# DISK INFO ada0
3014/dev/ada0
3015/dev/ada0s1
3016/dev/ada0s10
3017/dev/ada0s2
3018/dev/ada0s2a
3019/dev/ada0s2b
3020/dev/ada0s2d
3021/dev/ada0s2e
3022/dev/ada0s2f
3023/dev/ada0s3
3024/dev/ada0s3a
3025/dev/ada0s3b
3026/dev/ada0s4
3027/dev/ada0s5
3028/dev/ada0s6
3029/dev/ada0s7
3030/dev/ada0s8
3031/dev/ada0s9
3032=>        63  1953522992  ada0  MBR  (931G)
3033          63   134223012     1  ntfs  (64G)
3034   134223075   419430375     2  freebsd  [active]  (200G)
3035   553653450         822        - free -  (411k)
3036   553654272   419434496     3  freebsd  (200G)
3037   973088768   980432896     4  ebr  (467G)
3038  1953521664        1391        - free -  (695k)
3039
3040
3041# DISK INFO ada1
3042/dev/ada1
3043/dev/ada1s1
3044/dev/ada1s2
3045/dev/ada1s3
3046/dev/ada1s4
3047/dev/ada1s5
3048/dev/ada1s6
3049=>       63  976770992  ada1  MBR  (465G)
3050         63   41945652     1  !12  (20G)
3051   41945715   83891430     2  !6  (40G)
3052  125837145   83891430     3  !6  (40G)
3053  209728575  767039490     4  ebr  (365G)
3054  976768065       2990        - free -  (1.5M)
3055
3056
3057# DISK INFO da0
3058/dev/da0
3059/dev/da0s1
3060=>      63  62717889  da0  MBR  (29G)
3061        63       193       - free -  (96k)
3062       256  62717696    1  fat32  (29G)
3063
3064
3065# MOUNT OUTPUT
3066/dev/iso9660/PCBSD_INSTALL on / (cd9660, local, read-only)
3067devfs on /dev (devfs, local, multilabel)
3068/dev/md6 on /tmp (ufs, local)
3069/dev/md2 on /memfs (ufs, local)
3070/dev/md0.uzip on /usr (ufs, local, read-only)
3071/dev/md10 on /etc (ufs, local)
3072/dev/md9 on /var (ufs, local)
3073/dev/md8 on /root (ufs, local)
3074tank/tmp on /mnt/tmp (zfs, local, nfsv4acls)
3075tank/usr/home on /mnt/usr/home (zfs, local, nfsv4acls)
3076tank/usr/jails on /mnt/usr/jails (zfs, local, nfsv4acls)
3077tank/usr/obj on /mnt/usr/obj (zfs, local, nfsv4acls)
3078tank/usr/pbi on /mnt/usr/pbi (zfs, local, nfsv4acls)
3079tank/usr/ports on /mnt/usr/ports (zfs, local, nfsv4acls)
3080tank/usr/ports/distfiles on /mnt/usr/ports/distfiles (zfs, local, nfsv4acls)
3081tank/usr/src on /mnt/usr/src (zfs, local, nfsv4acls)
3082tank/var/audit on /mnt/var/audit (zfs, local, nfsv4acls)
3083tank/var/log on /mnt/var/log (zfs, local, nfsv4acls)
3084tank/var/tmp on /mnt/var/tmp (zfs, local, nfsv4acls)
3085devfs on /mnt/dev (devfs, local, multilabel)