source: src-qt4/pc-zmanager/i18n/ZManager_en_ZA.ts @ e297f9b

releng/10.0.1releng/10.0.2releng/10.0.3releng/10.1
Last change on this file since e297f9b was e297f9b, checked in by PC-BSD Auto Commit Bot <auto-commit-bot@…>, 10 months ago

Auto-Commit of i18n data from Pootle

  • Property mode set to 100644
File size: 63.2 KB
Line 
1<?xml version="1.0" encoding="utf-8"?>
2<!DOCTYPE TS>
3<TS version="2.0">
4<context>
5    <name>DialogFSProp</name>
6    <message>
7        <source>Dialog</source>
8        <translation>Dialog</translation>
9    </message>
10    <message>
11        <source>Apply changes recursively to all descendants</source>
12        <translation>Apply changes recursively to all descendants</translation>
13    </message>
14    <message>
15        <source>Property</source>
16        <translation>Property</translation>
17    </message>
18    <message>
19        <source>Value</source>
20        <translation>Value</translation>
21    </message>
22    <message>
23        <source>Source</source>
24        <translation>Source</translation>
25    </message>
26    <message>
27        <source>Add user property</source>
28        <translation>Add user property</translation>
29    </message>
30    <message>
31        <source>...</source>
32        <translation>...</translation>
33    </message>
34    <message>
35        <source>Remove user property</source>
36        <translation>Remove user property</translation>
37    </message>
38    <message>
39        <source>Inherit from parent</source>
40        <translation>Inherit from parent</translation>
41    </message>
42    <message>
43        <source>Revert changes</source>
44        <translation>Revert changes</translation>
45    </message>
46    <message>
47        <source>Controls how ACL entries are inherited when files and directories are created. The values are
48discard, noallow, restricted, and passthrough. For a description of these values, see ACL Properties.</source>
49        <translation>Controls how ACL entries are inherited when files and directories are created. The values are
50discard, noallow, restricted, and passthrough. For a description of these values, see ACL Properties.</translation>
51    </message>
52    <message>
53        <source>Controls how an ACL entry is modified during a chmod operation.
54The values are discard, groupmask, and passthrough. For a description of
55these values, see ACL Properties.</source>
56        <translation>Controls how an ACL entry is modified during a chmod operation.
57The values are discard, groupmask, and passthrough. For a description of
58these values, see ACL Properties.</translation>
59    </message>
60    <message>
61        <source>Controls whether the access time for files is updated when they are read.
62Turning this property off avoids producing write traffic when reading files and
63can result in significant performance gains, though it might confuse mailers and
64similar utilities.</source>
65        <translation>Controls whether the access time for files is updated when they are read.
66Turning this property off avoids producing write traffic when reading files and
67can result in significant performance gains, though it might confuse mailers and
68similar utilities.</translation>
69    </message>
70    <message>
71        <source>Read-only property that identifies the amount of disk space available to a dataset
72and all its children, assuming no other activity in the pool. Because disk space is
73shared within a pool, available space can be limited by various factors including
74physical pool size, quotas, reservations, and other datasets within the pool.</source>
75        <translation>Read-only property that identifies the amount of disk space available to a dataset
76and all its children, assuming no other activity in the pool. Because disk space is
77shared within a pool, available space can be limited by various factors including
78physical pool size, quotas, reservations, and other datasets within the pool.</translation>
79    </message>
80    <message>
81        <source>If this property is set to off, the file system cannot be mounted,
82and is ignored by &apos;zfs mount -a&apos;.  Setting this property to off is
83similar to setting the mountpoint property to none, except that the
84dataset still has a normal mountpoint property, which can be inherited
85Setting this property to off allows datasets to be used solely as a
86mechanism to inherit properties. One example of setting canmount=off is
87to have two datasets with the same mountpoint, so that the children of
88both datasets appear in the same directory, but might have different
89inherited characteristics.</source>
90        <translation>If this property is set to off, the file system cannot be mounted,
91and is ignored by &apos;zfs mount -a&apos;.  Setting this property to off is
92similar to setting the mountpoint property to none, except that the
93dataset still has a normal mountpoint property, which can be inherited
94Setting this property to off allows datasets to be used solely as a
95mechanism to inherit properties. One example of setting canmount=off is
96to have two datasets with the same mountpoint, so that the children of
97both datasets appear in the same directory, but might have different
98inherited characteristics.</translation>
99    </message>
100    <message>
101        <source>Controls the checksum used to verify data integrity. The default
102value is on, which automatically selects an appropriate algorithm
103(currently, fletcher4, but this may change in future releases). The
104value off disables integrity checking on user data. Disabling
105checksums is NOT a recommended practice.</source>
106        <translation>Controls the checksum used to verify data integrity. The default
107value is on, which automatically selects an appropriate algorithm
108(currently, fletcher4, but this may change in future releases). The
109value off disables integrity checking on user data. Disabling
110checksums is NOT a recommended practice.</translation>
111    </message>
112    <message>
113        <source>Enables or disables compression for a dataset. The values are on, off, lzjb, zle, gzip,
114and gzip-N. Currently, setting this property to lzjb, gzip, or gzip-N has the same
115effect as setting this property to on. Enabling compression on a file system with
116existing data only compresses new data. Existing data remains uncompressed.</source>
117        <translation>Enables or disables compression for a dataset. The values are on, off, lzjb, zle, gzip,
118and gzip-N. Currently, setting this property to lzjb, gzip, or gzip-N has the same
119effect as setting this property to on. Enabling compression on a file system with
120existing data only compresses new data. Existing data remains uncompressed.</translation>
121    </message>
122    <message>
123        <source>Read-only property that identifies the compression ratio achieved for a dataset,
124expressed as a multiplier. Compression can be enabled by the zfs set compression=on
125dataset command. The value is calculated from the logical size of all files and the
126amount of referenced physical data. It includes explicit savings through the use of
127the compression property.</source>
128        <translation>Read-only property that identifies the compression ratio achieved for a dataset,
129expressed as a multiplier. Compression can be enabled by the zfs set compression=on
130dataset command. The value is calculated from the logical size of all files and the
131amount of referenced physical data. It includes explicit savings through the use of
132the compression property.</translation>
133    </message>
134    <message>
135        <source>Sets the number of copies of user data per file system. These copies
136are in addition to any pool-level redundancy. Disk space used by
137multiple copies of user data is charged to the corresponding file and
138dataset, and counts against quotas and reservations. In addition, the
139used property is updated when multiple copies are enabled. Consider setting
140this property when the file system is created because changing this property
141on an existing file system only affects newly written data.</source>
142        <translation>Sets the number of copies of user data per file system. These copies
143are in addition to any pool-level redundancy. Disk space used by
144multiple copies of user data is charged to the corresponding file and
145dataset, and counts against quotas and reservations. In addition, the
146used property is updated when multiple copies are enabled. Consider setting
147this property when the file system is created because changing this property
148on an existing file system only affects newly written data.</translation>
149    </message>
150    <message>
151        <source>Read-only property that identifies the date and time that a dataset was created.</source>
152        <translation>Read-only property that identifies the date and time that a dataset was created.</translation>
153    </message>
154    <message>
155        <source>Configures deduplication for a dataset. The default value is off.
156The default deduplication checksum is sha256 (this may change in the
157future).  When dedup is enabled, the checksum defined here overrides
158the checksum property. Setting the value to verify has the same
159effect as the setting sha256,verify.
160If set to verify, ZFS will do a byte-to-byte comparsion in case of
161two blocks having the same signature to make sure the block contents
162are identical.</source>
163        <translation>Configures deduplication for a dataset. The default value is off.
164The default deduplication checksum is sha256 (this may change in the
165future).  When dedup is enabled, the checksum defined here overrides
166the checksum property. Setting the value to verify has the same
167effect as the setting sha256,verify.
168If set to verify, ZFS will do a byte-to-byte comparsion in case of
169two blocks having the same signature to make sure the block contents
170are identical.</translation>
171    </message>
172    <message>
173        <source>The devices property is currently not supported on FreeBSD.</source>
174        <translation>The devices property is currently not supported on FreeBSD.</translation>
175    </message>
176    <message>
177        <source>Controls whether processes can be executed from within this file
178system. The default value is on.</source>
179        <translation>Controls whether processes can be executed from within this file
180system. The default value is on.</translation>
181    </message>
182    <message>
183        <source>Read-only property that indicates whether a file system, clone, or snapshot
184is currently mounted.</source>
185        <translation>Read-only property that indicates whether a file system, clone, or snapshot
186is currently mounted.</translation>
187    </message>
188    <message>
189        <source>Controls the mount point used for this file system. When the mountpoint property
190is changed for a file system, the file system and any descendents that inherit the
191mount point are unmounted. If the new value is legacy, then they remain unmounted.
192Otherwise, they are automatically remounted in the new location if the property was
193previously legacy or none, or if they were mounted before the property was changed.
194In addition, any shared file systems are unshared and shared in the new location.</source>
195        <translation>Controls the mount point used for this file system. When the mountpoint property
196is changed for a file system, the file system and any descendents that inherit the
197mount point are unmounted. If the new value is legacy, then they remain unmounted.
198Otherwise, they are automatically remounted in the new location if the property was
199previously legacy or none, or if they were mounted before the property was changed.
200In addition, any shared file systems are unshared and shared in the new location.</translation>
201    </message>
202    <message>
203        <source>Controls what is cached in the primary cache (ARC). Possible values are all,
204none, and metadata. If set to all, both user data and metadata are cached. If
205set to none, neither user data nor metadata is cached. If set to metadata, only
206metadata is cached.</source>
207        <translation>Controls what is cached in the primary cache (ARC). Possible values are all,
208none, and metadata. If set to all, both user data and metadata are cached. If
209set to none, neither user data nor metadata is cached. If set to metadata, only
210metadata is cached.</translation>
211    </message>
212    <message>
213        <source>Read-only property for cloned file systems or volumes that identifies
214the snapshot from which the clone was created. The origin cannot be
215destroyed (even with the -r or -f option) as long as a clone exists.
216Non-cloned file systems have an origin of none.</source>
217        <translation>Read-only property for cloned file systems or volumes that identifies
218the snapshot from which the clone was created. The origin cannot be
219destroyed (even with the -r or -f option) as long as a clone exists.
220Non-cloned file systems have an origin of none.</translation>
221    </message>
222    <message>
223        <source>Limits the amount of disk space a dataset and its descendents can consume.
224This property enforces a hard limit on the amount of disk space used,
225including all space consumed by descendents, such as file systems and snapshots.
226Setting a quota on a descendent of a dataset that already has a quota does not
227override the ancestor&apos;s quota, but rather imposes an additional limit.</source>
228        <translation>Limits the amount of disk space a dataset and its descendents can consume.
229This property enforces a hard limit on the amount of disk space used,
230including all space consumed by descendents, such as file systems and snapshots.
231Setting a quota on a descendent of a dataset that already has a quota does not
232override the ancestor&apos;s quota, but rather imposes an additional limit.</translation>
233    </message>
234    <message>
235        <source>Controls whether a dataset can be modified. When set to on,
236no modifications can be made.</source>
237        <translation>Controls whether a dataset can be modified. When set to on,
238no modifications can be made.</translation>
239    </message>
240    <message>
241        <source>Specifies a suggested block size for files in the file system. This
242property is designed solely for use with database workloads that
243access files in fixed-size records.  ZFS automatically tunes block
244sizes according to internal algorithms optimized for typical access
245patterns.
246Use of this property for general purpose file systems is strongly
247discouraged, and may adversely affect performance.
248The size specified must be a power of two greater than or equal to
249512 and less than or equal to 128 Kbytes.</source>
250        <translation>Specifies a suggested block size for files in the file system. This
251property is designed solely for use with database workloads that
252access files in fixed-size records.  ZFS automatically tunes block
253sizes according to internal algorithms optimized for typical access
254patterns.
255Use of this property for general purpose file systems is strongly
256discouraged, and may adversely affect performance.
257The size specified must be a power of two greater than or equal to
258512 and less than or equal to 128 Kbytes.</translation>
259    </message>
260    <message>
261        <source>Read-only property that identifies the amount of data accessible by a
262dataset, which might or might not be shared with other datasets in the
263pool.</source>
264        <translation>Read-only property that identifies the amount of data accessible by a
265dataset, which might or might not be shared with other datasets in the
266pool.</translation>
267    </message>
268    <message>
269        <source>Sets the amount of disk space that a dataset can consume. This property
270enforces a hard limit on the amount of space used. This hard limit does
271not include disk space used by descendents, such as snapshots and clones.</source>
272        <translation>Sets the amount of disk space that a dataset can consume. This property
273enforces a hard limit on the amount of space used. This hard limit does
274not include disk space used by descendents, such as snapshots and clones.</translation>
275    </message>
276    <message>
277        <source>Sets the minimum amount of disk space that is guaranteed to a dataset, not
278including descendents, such as snapshots and clones. When the amount of disk
279space used is below this value, the dataset is treated as if it were taking up
280the amount of space specified by refreservation. The refreservation reservation
281is accounted for in the parent dataset&apos;s disk space used, and counts against
282the parent dataset&apos;s quotas and reservations.
283If refreservation is set, a snapshot is only allowed if enough free pool space
284is available outside of this reservation to accommodate the current number of
285referenced bytes in the dataset.</source>
286        <translation>Sets the minimum amount of disk space that is guaranteed to a dataset, not
287including descendents, such as snapshots and clones. When the amount of disk
288space used is below this value, the dataset is treated as if it were taking up
289the amount of space specified by refreservation. The refreservation reservation
290is accounted for in the parent dataset&apos;s disk space used, and counts against
291the parent dataset&apos;s quotas and reservations.
292If refreservation is set, a snapshot is only allowed if enough free pool space
293is available outside of this reservation to accommodate the current number of
294referenced bytes in the dataset.</translation>
295    </message>
296    <message>
297        <source>Sets the minimum amount of disk space guaranteed to a dataset and its descendents.
298When the amount of disk space used is below this value, the dataset is treated as if
299it were using the amount of space specified by its reservation. Reservations are
300accounted for in the parent dataset&apos;s disk space used, and count against the parent
301dataset&apos;s quotas and reservations.</source>
302        <translation>Sets the minimum amount of disk space guaranteed to a dataset and its descendents.
303When the amount of disk space used is below this value, the dataset is treated as if
304it were using the amount of space specified by its reservation. Reservations are
305accounted for in the parent dataset&apos;s disk space used, and count against the parent
306dataset&apos;s quotas and reservations.</translation>
307    </message>
308    <message>
309        <source>Controls what is cached in the secondary cache (L2ARC). Possible values are all, none,
310and metadata. If set to all, both user data and metadata are cached. If set to none,
311neither user data nor metadata is cached. If set to metadata, only metadata is cached.</source>
312        <translation>Controls what is cached in the secondary cache (L2ARC). Possible values are all, none,
313and metadata. If set to all, both user data and metadata are cached. If set to none,
314neither user data nor metadata is cached. If set to metadata, only metadata is cached.</translation>
315    </message>
316    <message>
317        <source>Controls whether the setuid bit is honored in a file system.</source>
318        <translation>Controls whether the setuid bit is honored in a file system.</translation>
319    </message>
320    <message>
321        <source>Controls whether a file system is available over NFS and what
322options are used. If set to on, the zfs share command is invoked
323with no options. Otherwise, the zfs share command is invoked with
324options equivalent to the contents of this property.</source>
325        <translation>Controls whether a file system is available over NFS and what
326options are used. If set to on, the zfs share command is invoked
327with no options. Otherwise, the zfs share command is invoked with
328options equivalent to the contents of this property.</translation>
329    </message>
330    <message>
331        <source>The sharesmb property has currently no effect on FreeBSD.</source>
332        <translation>The sharesmb property has currently no effect on FreeBSD.</translation>
333    </message>
334    <message>
335        <source>Controls whether the .zfs directory is hidden or visible in the root of the file system.</source>
336        <translation>Controls whether the .zfs directory is hidden or visible in the root of the file system.</translation>
337    </message>
338    <message>
339        <source>Read-only property that identifies the dataset type as filesystem (file system or clone), volume, or snapshot.</source>
340        <translation>Read-only property that identifies the dataset type as filesystem (file system or clone), volume, or snapshot.</translation>
341    </message>
342    <message>
343        <source>Read-only property that identifies the amount of disk space consumed by a dataset and all its descendents.</source>
344        <translation>Read-only property that identifies the amount of disk space consumed by a dataset and all its descendents.</translation>
345    </message>
346    <message>
347        <source>Read-only property that identifies the amount of disk space that is used by
348children of this dataset, which would be freed if all the dataset&apos;s children
349were destroyed.</source>
350        <translation>Read-only property that identifies the amount of disk space that is used by
351children of this dataset, which would be freed if all the dataset&apos;s children
352were destroyed.</translation>
353    </message>
354    <message>
355        <source>Read-only property that identifies the amount of disk space that is used by
356a dataset itself, which would be freed if the dataset was destroyed, after
357first destroying any snapshots and removing any refreservation reservations.</source>
358        <translation>Read-only property that identifies the amount of disk space that is used by
359a dataset itself, which would be freed if the dataset was destroyed, after
360first destroying any snapshots and removing any refreservation reservations.</translation>
361    </message>
362    <message>
363        <source>Read-only property that identifies the amount of disk space that is used by a
364refreservation set on a dataset, which would be freed if the refreservation was
365removed.</source>
366        <translation>Read-only property that identifies the amount of disk space that is used by a
367refreservation set on a dataset, which would be freed if the refreservation was
368removed.</translation>
369    </message>
370    <message>
371        <source>Read-only property that identifies the amount of disk space that is consumed
372by snapshots of a dataset. In particular, it is the amount of disk space that
373would be freed if all of this dataset&apos;s snapshots were destroyed. Note that
374this value is not simply the sum of the snapshots&apos; used properties, because
375space can be shared by multiple snapshots.</source>
376        <translation>Read-only property that identifies the amount of disk space that is consumed
377by snapshots of a dataset. In particular, it is the amount of disk space that
378would be freed if all of this dataset&apos;s snapshots were destroyed. Note that
379this value is not simply the sum of the snapshots&apos; used properties, because
380space can be shared by multiple snapshots.</translation>
381    </message>
382    <message>
383        <source>Identifies the on-disk version of a file system, which is independent of the
384pool version. This property can only be set to a later version that is available
385from the supported software release.</source>
386        <translation>Identifies the on-disk version of a file system, which is independent of the
387pool version. This property can only be set to a later version that is available
388from the supported software release.</translation>
389    </message>
390    <message>
391        <source>For volumes, specifies the logical size of the volume.</source>
392        <translation>For volumes, specifies the logical size of the volume.</translation>
393    </message>
394    <message>
395        <source>For volumes, specifies the block size of the volume.</source>
396        <translation>For volumes, specifies the block size of the volume.</translation>
397    </message>
398    <message>
399        <source>Indicates whether a dataset has been added to a jail.</source>
400        <translation>Indicates whether a dataset has been added to a jail.</translation>
401    </message>
402    <message>
403        <source>This property is not supported on FreeBSD.</source>
404        <translation>This property is not supported on FreeBSD.</translation>
405    </message>
406    <message>
407        <source>The file system is marked to be destroyed after unmount.</source>
408        <translation>The file system is marked to be destroyed after unmount.</translation>
409    </message>
410    <message>
411        <source>The compression ratio achieved for the referenced space of this
412dataset, expressed as a multiplier.</source>
413        <translation>The compression ratio achieved for the referenced space of this
414dataset, expressed as a multiplier.</translation>
415    </message>
416    <message>
417        <source>The amount of referenced space written to this dataset since the
418previous snapshot.</source>
419        <translation>The amount of referenced space written to this dataset since the
420previous snapshot.</translation>
421    </message>
422    <message>
423        <source>This property is set to the number of user holds on this snapshot.
424</source>
425        <translation>This property is set to the number of user holds on this snapshot.
426</translation>
427    </message>
428    <message>
429        <source>Provide a hint to ZFS about handling of synchronous requests in this
430dataset.  If logbias is set to latency (the default), ZFS will use
431pool log devices (if configured) to handle the requests at low
432latency. If logbias is set to throughput, ZFS will not use configured
433pool log devices.  ZFS will instead optimize synchronous operations
434for global pool throughput and efficient use of resources.</source>
435        <translation>Provide a hint to ZFS about handling of synchronous requests in this
436dataset.  If logbias is set to latency (the default), ZFS will use
437pool log devices (if configured) to handle the requests at low
438latency. If logbias is set to throughput, ZFS will not use configured
439pool log devices.  ZFS will instead optimize synchronous operations
440for global pool throughput and efficient use of resources.</translation>
441    </message>
442    <message>
443        <source>Controls the behavior of synchronous requests (e.g.  fsync(2),
444O_DSYNC). This property accepts the following values:
445standard  This is the POSIX specified behavior of ensuring all
446          synchronous requests are written to stable storage and
447          all devices are flushed to ensure data is not cached by
448          device controllers (this is the default).
449always    All file system transactions are written and flushed
450          before their system calls return. This has a large
451          performance penalty.
452disabled  Disables synchronous requests. File system transactions
453          are only committed to stable storage periodically. This
454          option will give the highest performance.  However, it
455          is very dangerous as ZFS would be ignoring the synchro-
456          nous transaction demands of applications such as data-
457          bases or NFS.  Administrators should only use this
458          option when the risks are understood.</source>
459        <translation>Controls the behavior of synchronous requests (e.g.  fsync(2),
460O_DSYNC). This property accepts the following values:
461standard  This is the POSIX specified behavior of ensuring all
462          synchronous requests are written to stable storage and
463          all devices are flushed to ensure data is not cached by
464          device controllers (this is the default).
465always    All file system transactions are written and flushed
466          before their system calls return. This has a large
467          performance penalty.
468disabled  Disables synchronous requests. File system transactions
469          are only committed to stable storage periodically. This
470          option will give the highest performance.  However, it
471          is very dangerous as ZFS would be ignoring the synchro-
472          nous transaction demands of applications such as data-
473          bases or NFS.  Administrators should only use this
474          option when the risks are understood.</translation>
475    </message>
476    <message>
477        <source>This property cannot be changed after the system is created.</source>
478        <translation>This property cannot be changed after the system is created.</translation>
479    </message>
480    <message>
481        <source>User Property</source>
482        <translation>User Property</translation>
483    </message>
484    <message>
485        <source>Unknown property or information not available.
486Read ZFS manual for more information.</source>
487        <translation>Unknown property or information not available.
488Read ZFS manual for more information.</translation>
489    </message>
490    <message>
491        <source>[Invalid]</source>
492        <translation>[Invalid]</translation>
493    </message>
494    <message>
495        <source>[Inherit]</source>
496        <translation>[Inherit]</translation>
497    </message>
498    <message>
499        <source>[Added]</source>
500        <translation>[Added]</translation>
501    </message>
502    <message>
503        <source>[Changed]</source>
504        <translation>[Changed]</translation>
505    </message>
506    <message>
507        <source>User property</source>
508        <translation>User property</translation>
509    </message>
510    <message>
511        <source>Device Menu</source>
512        <translation>Device Menu</translation>
513    </message>
514    <message>
515        <source>Add new user property</source>
516        <translation>Add new user property</translation>
517    </message>
518    <message>
519        <source>Delete user property</source>
520        <translation>Delete user property</translation>
521    </message>
522</context>
523<context>
524    <name>DialogMount</name>
525    <message>
526        <source>Dialog</source>
527        <translation>Dialog</translation>
528    </message>
529    <message>
530        <source>Device to mount:</source>
531        <translation>Device to mount:</translation>
532    </message>
533    <message>
534        <source>(Device)</source>
535        <translation>(Device)</translation>
536    </message>
537    <message>
538        <source>Mount location:</source>
539        <translation>Mount location:</translation>
540    </message>
541    <message>
542        <source>...</source>
543        <translation>...</translation>
544    </message>
545    <message>
546        <source>Select Directory</source>
547        <translation>Select Directory</translation>
548    </message>
549</context>
550<context>
551    <name>DialogName</name>
552    <message>
553        <source>Dialog</source>
554        <translation>Dialog</translation>
555    </message>
556    <message>
557        <source>Pool name:</source>
558        <translation>Pool name:</translation>
559    </message>
560    <message>
561        <source>Do not mount any filesystems</source>
562        <translation>Do not mount any filesystems</translation>
563    </message>
564    <message>
565        <source>Read only pool</source>
566        <translation>Read only pool</translation>
567    </message>
568    <message>
569        <source>Import options:</source>
570        <translation>Import options:</translation>
571    </message>
572    <message>
573        <source>Mount with alternative root:</source>
574        <translation>Mount with alternative root:</translation>
575    </message>
576    <message>
577        <source>Mount all filesystems automatically</source>
578        <translation>Mount all filesystems automatically</translation>
579    </message>
580    <message>
581        <source>Mounting behavior:</source>
582        <translation>Mounting behavior:</translation>
583    </message>
584    <message>
585        <source>Force operation if error (use with caution)</source>
586        <translation>Force operation if error (use with caution)</translation>
587    </message>
588</context>
589<context>
590    <name>DialogNewPool</name>
591    <message>
592        <source>Dialog</source>
593        <translation>Dialog</translation>
594    </message>
595    <message>
596        <source>Selected</source>
597        <translation>Selected</translation>
598    </message>
599    <message>
600        <source>Pool name:</source>
601        <translation>Pool name:</translation>
602    </message>
603    <message>
604        <source>Configuration type:</source>
605        <translation>Configuration type:</translation>
606    </message>
607    <message>
608        <source>Striped</source>
609        <translation>Striped</translation>
610    </message>
611    <message>
612        <source>Mirror</source>
613        <translation>Mirror</translation>
614    </message>
615    <message>
616        <source>Raid-Z (single parity)</source>
617        <translation>Raid-Z (single parity)</translation>
618    </message>
619    <message>
620        <source>Raid-Z2 (double parity)</source>
621        <translation>Raid-Z2 (double parity)</translation>
622    </message>
623    <message>
624        <source>Raid-Z3 (triple parity)</source>
625        <translation>Raid-Z3 (triple parity)</translation>
626    </message>
627    <message>
628        <source>Cache</source>
629        <translation>Cache</translation>
630    </message>
631    <message>
632        <source>Log</source>
633        <translation>Log</translation>
634    </message>
635    <message>
636        <source>Spare</source>
637        <translation>Spare</translation>
638    </message>
639    <message>
640        <source>Error Description Here</source>
641        <translation>Error Description Here</translation>
642    </message>
643    <message>
644        <source>Must provide a valid pool name</source>
645        <translation>Must provide a valid pool name</translation>
646    </message>
647    <message>
648        <source>Must select exactly %1 devices</source>
649        <translation>Must select exactly %1 devices</translation>
650    </message>
651    <message>
652        <source>Must select at least one device</source>
653        <translation>Must select at least one device</translation>
654    </message>
655</context>
656<context>
657    <name>DialogPartition</name>
658    <message>
659        <source>Add Partition</source>
660        <translation>Add Partition</translation>
661    </message>
662    <message>
663        <source>Add new slice/partition</source>
664        <translation>Add new slice/partition</translation>
665    </message>
666    <message>
667        <source>100 GB</source>
668        <translation>100 GB</translation>
669    </message>
670    <message>
671        <source>Device:</source>
672        <translation>Device:</translation>
673    </message>
674    <message>
675        <source>ada0</source>
676        <translation>ada0</translation>
677    </message>
678    <message>
679        <source>Largest available free block:</source>
680        <translation>Largest available free block:</translation>
681    </message>
682    <message>
683        <source>Total Size:</source>
684        <translation>Total Size:</translation>
685    </message>
686    <message>
687        <source>Current layout:</source>
688        <translation>Current layout:</translation>
689    </message>
690    <message>
691        <source>Designation</source>
692        <translation>Designation</translation>
693    </message>
694    <message>
695        <source>Start Sector</source>
696        <translation>Start Sector</translation>
697    </message>
698    <message>
699        <source>Sector Count</source>
700        <translation>Sector Count</translation>
701    </message>
702    <message>
703        <source>Size</source>
704        <translation>Size</translation>
705    </message>
706    <message>
707        <source>Color</source>
708        <translation>Color</translation>
709    </message>
710    <message>
711        <source>New partition Size:</source>
712        <translation>New partition Size:</translation>
713    </message>
714    <message>
715        <source>bytes</source>
716        <translation>bytes</translation>
717    </message>
718    <message>
719        <source>kB</source>
720        <translation>kB</translation>
721    </message>
722    <message>
723        <source>MB</source>
724        <translation>MB</translation>
725    </message>
726    <message>
727        <source>GB</source>
728        <translation>GB</translation>
729    </message>
730    <message>
731        <source>TB</source>
732        <translation>TB</translation>
733    </message>
734    <message>
735        <source>Partition type:</source>
736        <translation>Partition type:</translation>
737    </message>
738    <message>
739        <source>freebsd-zfs</source>
740        <translation>freebsd-zfs</translation>
741    </message>
742    <message>
743        <source>freebsd-ufs</source>
744        <translation>freebsd-ufs</translation>
745    </message>
746    <message>
747        <source>freebsd</source>
748        <translation>freebsd</translation>
749    </message>
750    <message>
751        <source>freebsd-boot</source>
752        <translation>freebsd-boot</translation>
753    </message>
754    <message>
755        <source>freebsd-swap</source>
756        <translation>freebsd-swap</translation>
757    </message>
758    <message>
759        <source>bios-boot</source>
760        <translation>bios-boot</translation>
761    </message>
762    <message>
763        <source>efi</source>
764        <translation>efi</translation>
765    </message>
766    <message>
767        <source>Create and initialize a new filesystem</source>
768        <translation>Create and initialize a new filesystem</translation>
769    </message>
770    <message>
771        <source>** FREE **</source>
772        <translation>** FREE **</translation>
773    </message>
774    <message>
775        <source>No free space!</source>
776        <translation>No free space!</translation>
777    </message>
778</context>
779<context>
780    <name>DialogProp</name>
781    <message>
782        <source>Edit Pool Properties</source>
783        <translation>Edit Pool Properties</translation>
784    </message>
785    <message>
786        <source>Property</source>
787        <translation>Property</translation>
788    </message>
789    <message>
790        <source>Value</source>
791        <translation>Value</translation>
792    </message>
793    <message>
794        <source>Total size of the storage pool.</source>
795        <translation>Total size of the storage pool.</translation>
796    </message>
797    <message>
798        <source>Percentage of pool space used.</source>
799        <translation>Percentage of pool space used.</translation>
800    </message>
801    <message>
802        <source>Alternate root directory. If set, this directory is prepended to any
803mount points within the pool. This can be used when examining an
804unknown pool where the mount points cannot be trusted, or in an
805alternate boot environment, where the typical paths are not valid.
806altroot is not a persistent property. It is valid only while the
807system is up.  Setting altroot defaults to using cachefile=none, though
808this may be overridden using an explicit setting.</source>
809        <translation>Alternate root directory. If set, this directory is prepended to any
810mount points within the pool. This can be used when examining an
811unknown pool where the mount points cannot be trusted, or in an
812alternate boot environment, where the typical paths are not valid.
813altroot is not a persistent property. It is valid only while the
814system is up.  Setting altroot defaults to using cachefile=none, though
815this may be overridden using an explicit setting.</translation>
816    </message>
817    <message>
818        <source>The current health of the pool.</source>
819        <translation>The current health of the pool.</translation>
820    </message>
821    <message>
822        <source>A unique identifier for the pool.</source>
823        <translation>A unique identifier for the pool.</translation>
824    </message>
825    <message>
826        <source>The current on-disk version of the pool. This can be increased, but
827never decreased. The preferred method of updating pools is with the
828&quot;zpool upgrade&quot; command, though this property can be used when a
829specific version is needed for backwards compatibility. This property
830can be any number between 1 and the current version reported by
831&quot;zpool upgrade -v&quot;.</source>
832        <translation>The current on-disk version of the pool. This can be increased, but
833never decreased. The preferred method of updating pools is with the
834&quot;zpool upgrade&quot; command, though this property can be used when a
835specific version is needed for backwards compatibility. This property
836can be any number between 1 and the current version reported by
837&quot;zpool upgrade -v&quot;.</translation>
838    </message>
839    <message>
840        <source>Identifies the default bootable dataset for the root pool. This
841property is expected to be set mainly by the installation and upgrade
842programs.</source>
843        <translation>Identifies the default bootable dataset for the root pool. This
844property is expected to be set mainly by the installation and upgrade
845programs.</translation>
846    </message>
847    <message>
848        <source>Controls whether a non-privileged user is granted access based on the
849dataset permissions defined on the dataset. See zfs(8) for more
850information on ZFS delegated administration.</source>
851        <translation>Controls whether a non-privileged user is granted access based on the
852dataset permissions defined on the dataset. See zfs(8) for more
853information on ZFS delegated administration.</translation>
854    </message>
855    <message>
856        <source>Controls automatic device replacement. If set to &quot;off&quot;, device
857replacement must be initiated by the administrator by using the
858&quot;zpool replace&quot; command. If set to &quot;on&quot;, any new device, found in the
859same physical location as a device that previously belonged to the
860pool, is automatically formatted and replaced. The default behavior
861is &quot;off&quot;.  This property can also be referred to by its shortened
862column name, &quot;replace&quot;.</source>
863        <translation>Controls automatic device replacement. If set to &quot;off&quot;, device
864replacement must be initiated by the administrator by using the
865&quot;zpool replace&quot; command. If set to &quot;on&quot;, any new device, found in the
866same physical location as a device that previously belonged to the
867pool, is automatically formatted and replaced. The default behavior
868is &quot;off&quot;.  This property can also be referred to by its shortened
869column name, &quot;replace&quot;.</translation>
870    </message>
871    <message>
872        <source>Controls whether information about snapshots associated with this
873pool is output when &quot;zfs list&quot; is run without the -t option. The
874default value is off.</source>
875        <translation>Controls whether information about snapshots associated with this
876pool is output when &quot;zfs list&quot; is run without the -t option. The
877default value is off.</translation>
878    </message>
879    <message>
880        <source>Controls automatic pool expansion when the underlying LUN is grown.
881If set to &quot;on&quot;, the pool will be resized according to the size of the
882expanded device. If the device is part of a mirror or raidz then all
883devices within that mirror/raidz group must be expanded before the
884new space is made available to the pool. The default behavior is
885&quot;off&quot;.  This property can also be referred to by its shortened column
886name, expand.</source>
887        <translation>Controls automatic pool expansion when the underlying LUN is grown.
888If set to &quot;on&quot;, the pool will be resized according to the size of the
889expanded device. If the device is part of a mirror or raidz then all
890devices within that mirror/raidz group must be expanded before the
891new space is made available to the pool. The default behavior is
892&quot;off&quot;.  This property can also be referred to by its shortened column
893name, expand.</translation>
894    </message>
895    <message>
896        <source>Threshold for the number of block ditto copies. If the reference
897count for a deduplicated block increases above this number, a new
898ditto copy of this block is automatically stored. Default setting is
8990.</source>
900        <translation>Threshold for the number of block ditto copies. If the reference
901count for a deduplicated block increases above this number, a new
902ditto copy of this block is automatically stored. Default setting is
9030.</translation>
904    </message>
905    <message>
906        <source>The deduplication ratio specified for a pool, expressed as a multiplier. For
907example, a value of 1.76 indicates that 1.76 units of data were stored but
908only 1 unit of disk space was actually consumed. See zfs(8) for a description
909of the deduplication feature.</source>
910        <translation>The deduplication ratio specified for a pool, expressed as a multiplier. For
911example, a value of 1.76 indicates that 1.76 units of data were stored but
912only 1 unit of disk space was actually consumed. See zfs(8) for a description
913of the deduplication feature.</translation>
914    </message>
915    <message>
916        <source>Number of blocks within the pool that are not allocated.</source>
917        <translation>Number of blocks within the pool that are not allocated.</translation>
918    </message>
919    <message>
920        <source>Amount of storage space within the pool that has been physically allocated.</source>
921        <translation>Amount of storage space within the pool that has been physically allocated.</translation>
922    </message>
923    <message>
924        <source>An arbitrary comment string set by the administrator.</source>
925        <translation>An arbitrary comment string set by the administrator.</translation>
926    </message>
927    <message>
928        <source>This property has currently no value on FreeBSD.</source>
929        <translation>This property has currently no value on FreeBSD.</translation>
930    </message>
931    <message>
932        <source>Controls the location of where the pool configuration is cached.
933Discovering all pools on system startup requires a cached copy of the
934configuration data that is stored on the root file system. All pools
935in this cache are automatically imported when the system boots. Some
936environments, such as install and clustering, need to cache this
937information in a different location so that pools are not automatically
938imported. Setting this property caches the pool configuration
939in a different location that can later be imported with &quot;zpool import
940-c&quot;.  Setting it to the special value &quot;none&quot; creates a temporary pool
941that is never cached, and the special value &apos;&apos; (empty string) uses
942the default location.</source>
943        <translation>Controls the location of where the pool configuration is cached.
944Discovering all pools on system startup requires a cached copy of the
945configuration data that is stored on the root file system. All pools
946in this cache are automatically imported when the system boots. Some
947environments, such as install and clustering, need to cache this
948information in a different location so that pools are not automatically
949imported. Setting this property caches the pool configuration
950in a different location that can later be imported with &quot;zpool import
951-c&quot;.  Setting it to the special value &quot;none&quot; creates a temporary pool
952that is never cached, and the special value &apos;&apos; (empty string) uses
953the default location.</translation>
954    </message>
955    <message>
956        <source>If set to on, pool will be imported in read-only mode with the
957following restrictions:
958  *   Synchronous data in the intent log will not be accessible
959  *   Properties of the pool can not be changed
960  *   Datasets of this pool can only be mounted read-only
961  *   To write to a read-only pool, a export and import of the pool
962      is required.
963</source>
964        <translation>If set to on, pool will be imported in read-only mode with the
965following restrictions:
966  *   Synchronous data in the intent log will not be accessible
967  *   Properties of the pool can not be changed
968  *   Datasets of this pool can only be mounted read-only
969  *   To write to a read-only pool, a export and import of the pool
970      is required.
971</translation>
972    </message>
973    <message>
974        <source>Controls the system behavior in the event of catastrophic pool failure
975This condition is typically a result of a loss of connectivity
976to the underlying storage device(s) or a failure of all devices
977within the pool. The behavior of such an event is determined as follows
978wait
979Blocks all I/O access until the device connectivity is recovered
980and the errors are cleared. This is the default behavior
981continue
982Returns EIO to any new write I/O requests but allows reads to
983any of the remaining healthy devices. Any write requests that
984have yet to be committed to disk would be blocked.
985
986panic
987Prints out a message to the console and generates a system
988crash dump.
989</source>
990        <translation type="unfinished"></translation>
991    </message>
992</context>
993<context>
994    <name>DialogfsCreate</name>
995    <message>
996        <source>New Filesystem</source>
997        <translation>New Filesystem</translation>
998    </message>
999    <message>
1000        <source>Name:</source>
1001        <translation>Name:</translation>
1002    </message>
1003    <message>
1004        <source>Properties override at creation time:</source>
1005        <translation>Properties override at creation time:</translation>
1006    </message>
1007    <message>
1008        <source>Prevent auto mount (canmount=noauto)</source>
1009        <translation>Prevent auto mount (canmount=noauto)</translation>
1010    </message>
1011    <message>
1012        <source>Mountpoint</source>
1013        <translation>Mountpoint</translation>
1014    </message>
1015    <message>
1016        <source>none</source>
1017        <translation>none</translation>
1018    </message>
1019    <message>
1020        <source>legacy</source>
1021        <translation>legacy</translation>
1022    </message>
1023    <message>
1024        <source>[path]</source>
1025        <translation>[path]</translation>
1026    </message>
1027    <message>
1028        <source>Force UTF-8 only (utf8only=on)</source>
1029        <translation>Force UTF-8 only (utf8only=on)</translation>
1030    </message>
1031    <message>
1032        <source>Unicode normalization =</source>
1033        <translation>Unicode normalization =</translation>
1034    </message>
1035    <message>
1036        <source>formD</source>
1037        <translation>formD</translation>
1038    </message>
1039    <message>
1040        <source>formKCF</source>
1041        <translation>formKCF</translation>
1042    </message>
1043    <message>
1044        <source>Copies =</source>
1045        <translation>Copies =</translation>
1046    </message>
1047    <message>
1048        <source>Deduplication (dedup=on)</source>
1049        <translation>Deduplication (dedup=on)</translation>
1050    </message>
1051    <message>
1052        <source>Compression =</source>
1053        <translation>Compression =</translation>
1054    </message>
1055    <message>
1056        <source>off</source>
1057        <translation>off</translation>
1058    </message>
1059    <message>
1060        <source>on</source>
1061        <translation>on</translation>
1062    </message>
1063    <message>
1064        <source>lzjb</source>
1065        <translation>lzjb</translation>
1066    </message>
1067    <message>
1068        <source>zle</source>
1069        <translation>zle</translation>
1070    </message>
1071    <message>
1072        <source>gzip</source>
1073        <translation>gzip</translation>
1074    </message>
1075    <message>
1076        <source>gzip-1</source>
1077        <translation>gzip-1</translation>
1078    </message>
1079    <message>
1080        <source>gzip-2</source>
1081        <translation>gzip-2</translation>
1082    </message>
1083    <message>
1084        <source>gzip-3</source>
1085        <translation>gzip-3</translation>
1086    </message>
1087    <message>
1088        <source>gzip-4</source>
1089        <translation>gzip-4</translation>
1090    </message>
1091    <message>
1092        <source>gzip-5</source>
1093        <translation>gzip-5</translation>
1094    </message>
1095    <message>
1096        <source>gzip-6</source>
1097        <translation>gzip-6</translation>
1098    </message>
1099    <message>
1100        <source>gzip-7</source>
1101        <translation>gzip-7</translation>
1102    </message>
1103    <message>
1104        <source>gzip-8</source>
1105        <translation>gzip-8</translation>
1106    </message>
1107    <message>
1108        <source>gzip-9</source>
1109        <translation>gzip-9</translation>
1110    </message>
1111</context>
1112<context>
1113    <name>ZManagerWindow</name>
1114    <message>
1115        <source>PCBSD Disk Manager</source>
1116        <translation>PCBSD Disk Manager</translation>
1117    </message>
1118    <message>
1119        <source>Disks</source>
1120        <translation>Disks</translation>
1121    </message>
1122    <message>
1123        <source>Device</source>
1124        <translation>Device</translation>
1125    </message>
1126    <message>
1127        <source>State</source>
1128        <translation>State</translation>
1129    </message>
1130    <message>
1131        <source>ZFS Pools</source>
1132        <translation>ZFS Pools</translation>
1133    </message>
1134    <message>
1135        <source>Pool Name</source>
1136        <translation>Pool Name</translation>
1137    </message>
1138    <message>
1139        <source>Status:</source>
1140        <translation>Status:</translation>
1141    </message>
1142    <message>
1143        <source>TextLabel</source>
1144        <translation>TextLabel</translation>
1145    </message>
1146    <message>
1147        <source>Clear Error</source>
1148        <translation>Clear Error</translation>
1149    </message>
1150    <message>
1151        <source>poolname</source>
1152        <translation>poolname</translation>
1153    </message>
1154    <message>
1155        <source>ZFS Filesystems</source>
1156        <translation>ZFS Filesystems</translation>
1157    </message>
1158    <message>
1159        <source>Filesystems</source>
1160        <translation>Filesystems</translation>
1161    </message>
1162    <message>
1163        <source>Status</source>
1164        <translation>Status</translation>
1165    </message>
1166    <message>
1167        <source>Refreshing...</source>
1168        <translation>Refreshing...</translation>
1169    </message>
1170    <message>
1171        <source>No pools available, right click to create a new one...</source>
1172        <translation>No pools available, right click to create a new one...</translation>
1173    </message>
1174    <message>
1175        <source> (No media in drive)</source>
1176        <translation> (No media in drive)</translation>
1177    </message>
1178    <message>
1179        <source>Avaliable</source>
1180        <translation>Avaliable</translation>
1181    </message>
1182    <message>
1183        <source>No disk</source>
1184        <translation>No disk</translation>
1185    </message>
1186    <message>
1187        <source>ZPool: </source>
1188        <translation>ZPool: </translation>
1189    </message>
1190    <message>
1191        <source>Sliced</source>
1192        <translation>Sliced</translation>
1193    </message>
1194    <message>
1195        <source>Mounted: </source>
1196        <translation>Mounted: </translation>
1197    </message>
1198    <message>
1199        <source>Available</source>
1200        <translation>Available</translation>
1201    </message>
1202    <message>
1203        <source>Unmounted</source>
1204        <translation>Unmounted</translation>
1205    </message>
1206    <message>
1207        <source>Partitioned</source>
1208        <translation>Partitioned</translation>
1209    </message>
1210    <message>
1211        <source>(Exported)
1212</source>
1213        <translation>(Exported)
1214</translation>
1215    </message>
1216    <message>
1217        <source>(Destroyed)
1218</source>
1219        <translation>(Destroyed)
1220</translation>
1221    </message>
1222    <message>
1223        <source>Offline</source>
1224        <translation>Offline</translation>
1225    </message>
1226    <message>
1227        <source>Online</source>
1228        <translation>Online</translation>
1229    </message>
1230    <message>
1231        <source>Degraded</source>
1232        <translation>Degraded</translation>
1233    </message>
1234    <message>
1235        <source>Faulted</source>
1236        <translation>Faulted</translation>
1237    </message>
1238    <message>
1239        <source>Removed</source>
1240        <translation>Removed</translation>
1241    </message>
1242    <message>
1243        <source>Unavailable</source>
1244        <translation>Unavailable</translation>
1245    </message>
1246    <message>
1247        <source>Unknown</source>
1248        <translation>Unknown</translation>
1249    </message>
1250    <message>
1251        <source>Create new pool</source>
1252        <translation>Create new pool</translation>
1253    </message>
1254    <message>
1255        <source>Rename pool</source>
1256        <translation>Rename pool</translation>
1257    </message>
1258    <message>
1259        <source>Destroy pool</source>
1260        <translation>Destroy pool</translation>
1261    </message>
1262    <message>
1263        <source>Add devices...</source>
1264        <translation>Add devices...</translation>
1265    </message>
1266    <message>
1267        <source>Add log devices...</source>
1268        <translation>Add log devices...</translation>
1269    </message>
1270    <message>
1271        <source>Add cache devices...</source>
1272        <translation>Add cache devices...</translation>
1273    </message>
1274    <message>
1275        <source>Add spare devices...</source>
1276        <translation>Add spare devices...</translation>
1277    </message>
1278    <message>
1279        <source>Scrub</source>
1280        <translation>Scrub</translation>
1281    </message>
1282    <message>
1283        <source>Export pool</source>
1284        <translation>Export pool</translation>
1285    </message>
1286    <message>
1287        <source>Import pool</source>
1288        <translation>Import pool</translation>
1289    </message>
1290    <message>
1291        <source>Recover destroyed pool</source>
1292        <translation>Recover destroyed pool</translation>
1293    </message>
1294    <message>
1295        <source>Properties...</source>
1296        <translation>Properties...</translation>
1297    </message>
1298    <message>
1299        <source>Attach (mirror) device...</source>
1300        <translation>Attach (mirror) device...</translation>
1301    </message>
1302    <message>
1303        <source>Detach from mirror</source>
1304        <translation>Detach from mirror</translation>
1305    </message>
1306    <message>
1307        <source>Take offline</source>
1308        <translation>Take offline</translation>
1309    </message>
1310    <message>
1311        <source>Bring online</source>
1312        <translation>Bring online</translation>
1313    </message>
1314    <message>
1315        <source>Remove</source>
1316        <translation>Remove</translation>
1317    </message>
1318    <message>
1319        <source>zpool Menu</source>
1320        <translation>zpool Menu</translation>
1321    </message>
1322    <message>
1323        <source>Device Menu</source>
1324        <translation>Device Menu</translation>
1325    </message>
1326    <message>
1327        <source>Unmount</source>
1328        <translation>Unmount</translation>
1329    </message>
1330    <message>
1331        <source>Mount</source>
1332        <translation>Mount</translation>
1333    </message>
1334    <message>
1335        <source>Create MBR partition table</source>
1336        <translation>Create MBR partition table</translation>
1337    </message>
1338    <message>
1339        <source>Create GPT partition table</source>
1340        <translation>Create GPT partition table</translation>
1341    </message>
1342    <message>
1343        <source>Create BSD partition table</source>
1344        <translation>Create BSD partition table</translation>
1345    </message>
1346    <message>
1347        <source>Delete Partition Table</source>
1348        <translation>Delete Partition Table</translation>
1349    </message>
1350    <message>
1351        <source>Add new slice</source>
1352        <translation>Add new slice</translation>
1353    </message>
1354    <message>
1355        <source>Add new partition</source>
1356        <translation>Add new partition</translation>
1357    </message>
1358    <message>
1359        <source>Destroy this slice</source>
1360        <translation>Destroy this slice</translation>
1361    </message>
1362    <message>
1363        <source>Destroy this partition</source>
1364        <translation>Destroy this partition</translation>
1365    </message>
1366    <message>
1367        <source>Warning</source>
1368        <translation>Warning</translation>
1369    </message>
1370    <message>
1371        <source>This operation cannot be undone.
1372OK to destroy the slice/partition?</source>
1373        <translation>This operation cannot be undone.
1374OK to destroy the slice/partition?</translation>
1375    </message>
1376    <message>
1377        <source>Error report</source>
1378        <translation>Error report</translation>
1379    </message>
1380    <message>
1381        <source>Create new zpool</source>
1382        <translation>Create new zpool</translation>
1383    </message>
1384    <message>
1385        <source>Important information</source>
1386        <translation>Important information</translation>
1387    </message>
1388    <message>
1389        <source>The pool was imported in read-only mode, therefore attempting to destroy the pool will leave the pool in the state it was when imported, not necessarily destroyed.</source>
1390        <translation>The pool was imported in read-only mode, therefore attempting to destroy the pool will leave the pool in the state it was when imported, not necessarily destroyed.</translation>
1391    </message>
1392    <message>
1393        <source>Attach mirror devices to </source>
1394        <translation>Attach mirror devices to </translation>
1395    </message>
1396    <message>
1397        <source>The pool was imported in read-only mode, therefore attempting to export the pool will leave the pool in the state it was when imported, not necessarily exported.</source>
1398        <translation>The pool was imported in read-only mode, therefore attempting to export the pool will leave the pool in the state it was when imported, not necessarily exported.</translation>
1399    </message>
1400    <message>
1401        <source>Recover destroyed pool as...</source>
1402        <translation>Recover destroyed pool as...</translation>
1403    </message>
1404    <message>
1405        <source>Import pool as...</source>
1406        <translation>Import pool as...</translation>
1407    </message>
1408    <message>
1409        <source>The pool was imported in read-only mode, it cannot be renamed.</source>
1410        <translation>The pool was imported in read-only mode, it cannot be renamed.</translation>
1411    </message>
1412    <message>
1413        <source>Add more devices to zpool</source>
1414        <translation>Add more devices to zpool</translation>
1415    </message>
1416    <message>
1417        <source>Add log devices to zpool</source>
1418        <translation>Add log devices to zpool</translation>
1419    </message>
1420    <message>
1421        <source>Add cache devices to zpool</source>
1422        <translation>Add cache devices to zpool</translation>
1423    </message>
1424    <message>
1425        <source>Add spare devices to zpool</source>
1426        <translation>Add spare devices to zpool</translation>
1427    </message>
1428    <message>
1429        <source>[Mounted]</source>
1430        <translation>[Mounted]</translation>
1431    </message>
1432    <message>
1433        <source>[Not Mounted]</source>
1434        <translation>[Not Mounted]</translation>
1435    </message>
1436    <message>
1437        <source> of </source>
1438        <translation> of </translation>
1439    </message>
1440    <message>
1441        <source>Rename dataset</source>
1442        <translation>Rename dataset</translation>
1443    </message>
1444    <message>
1445        <source>Create new dataset</source>
1446        <translation>Create new dataset</translation>
1447    </message>
1448    <message>
1449        <source>Create a clone dataset</source>
1450        <translation>Create a clone dataset</translation>
1451    </message>
1452    <message>
1453        <source>Destroy dataset</source>
1454        <translation>Destroy dataset</translation>
1455    </message>
1456    <message>
1457        <source>Promote filesystem</source>
1458        <translation>Promote filesystem</translation>
1459    </message>
1460    <message>
1461        <source>Take a snapshot</source>
1462        <translation>Take a snapshot</translation>
1463    </message>
1464    <message>
1465        <source>Destroy snapshot</source>
1466        <translation>Destroy snapshot</translation>
1467    </message>
1468    <message>
1469        <source>Rollback to this snapshot</source>
1470        <translation>Rollback to this snapshot</translation>
1471    </message>
1472    <message>
1473        <source>Edit properties</source>
1474        <translation>Edit properties</translation>
1475    </message>
1476    <message>
1477        <source>zfs Menu</source>
1478        <translation>zfs Menu</translation>
1479    </message>
1480    <message>
1481        <source>Confirmation</source>
1482        <translation>Confirmation</translation>
1483    </message>
1484    <message>
1485        <source>Take a new snapshot</source>
1486        <translation>Take a new snapshot</translation>
1487    </message>
1488    <message>
1489        <source>New name</source>
1490        <translation>New name</translation>
1491    </message>
1492    <message>
1493        <source>This operation cannot be undone and will cause all data added after the snapshot to be lost.
1494Any snapshots created after this one will be deleted, along with any clone filesystems that depend on them.
1495</source>
1496        <translation>This operation cannot be undone and will cause all data added after the snapshot to be lost.
1497Any snapshots created after this one will be deleted, along with any clone filesystems that depend on them.
1498</translation>
1499    </message>
1500    <message>
1501        <source>This pool had been destroyed, and its disks may have been reused. Attempting to recover will destroy any new data that could&apos;ve been stored in the devices that were reused and cannot be recovered.
1502Proceed with recovery?</source>
1503        <translation>This pool had been destroyed, and its disks may have been reused. Attempting to recover will destroy any new data that could&apos;ve been stored in the devices that were reused and cannot be recovered.
1504Proceed with recovery?</translation>
1505    </message>
1506    <message>
1507        <source>An error was detected while executing &apos;%1&apos;:
1508
1509</source>
1510        <translation type="unfinished"></translation>
1511    </message>
1512    <message>
1513        <source>An error was detected while executing &apos;zpool&apos;:
1514
1515</source>
1516        <translation type="unfinished"></translation>
1517    </message>
1518    <message>
1519        <source>An error was detected while executing &apos;zfs&apos;:
1520
1521</source>
1522        <translation type="unfinished"></translation>
1523    </message>
1524    <message>
1525        <source>This operation cannot be undone and will cause data loss.
1526
1527You are about to perform the following operation(s):
1528
1529</source>
1530        <translation type="unfinished"></translation>
1531    </message>
1532    <message>
1533        <source>
1534
1535Are you sure you want to proceed?
1536
1537</source>
1538        <translation type="unfinished"></translation>
1539    </message>
1540</context>
1541</TS>
Note: See TracBrowser for help on using the repository browser.