source: src-qt4/pc-zmanager/i18n/ZManager_zh_CN.ts @ 742e7df

releng/10.0.1releng/10.0.2
Last change on this file since 742e7df was 742e7df, checked in by PC-BSD Auto Commit Bot <auto-commit-bot@…>, 7 months ago

Auto-Commit of i18n data from Pootle

  • Property mode set to 100644
File size: 52.4 KB
Line 
1<?xml version="1.0" encoding="utf-8"?>
2<!DOCTYPE TS>
3<TS version="2.0">
4<context>
5    <name>DialogFSProp</name>
6    <message>
7        <source>Dialog</source>
8        <translation>对话</translation>
9    </message>
10    <message>
11        <source>Apply changes recursively to all descendants</source>
12        <translation>将歀曎改递園保存到所有的子条目䞭</translation>
13    </message>
14    <message>
15        <source>Property</source>
16        <translation>属性</translation>
17    </message>
18    <message>
19        <source>Value</source>
20        <translation>倌</translation>
21    </message>
22    <message>
23        <source>Source</source>
24        <translation>源</translation>
25    </message>
26    <message>
27        <source>Add user property</source>
28        <translation>添加甚户属性</translation>
29    </message>
30    <message>
31        <source>...</source>
32        <translation>

</translation>
33    </message>
34    <message>
35        <source>Remove user property</source>
36        <translation>删陀甚户属性</translation>
37    </message>
38    <message>
39        <source>Inherit from parent</source>
40        <translation>从父项䞭继承</translation>
41    </message>
42    <message>
43        <source>Revert changes</source>
44        <translation>取消曎改</translation>
45    </message>
46    <message>
47        <source>Controls how ACL entries are inherited when files and directories are created. The values are
48discard, noallow, restricted, and passthrough. For a description of these values, see ACL Properties.</source>
49        <translation>控制圓文件和目圕创建时ACL条目劂䜕继承。可选倌包括
50discardnoallowrestricted和passthrough。芁查看这些倌的描述请参看ACL属性。</translation>
51    </message>
52    <message>
53        <source>Controls how an ACL entry is modified during a chmod operation.
54The values are discard, groupmask, and passthrough. For a description of
55these values, see ACL Properties.</source>
56        <translation type="unfinished">
57            </translation>
58    </message>
59    <message>
60        <source>Controls whether the access time for files is updated when they are read.
61Turning this property off avoids producing write traffic when reading files and
62can result in significant performance gains, though it might confuse mailers and
63similar utilities.</source>
64        <translation type="unfinished">
65            </translation>
66    </message>
67    <message>
68        <source>Read-only property that identifies the amount of disk space available to a dataset
69and all its children, assuming no other activity in the pool. Because disk space is
70shared within a pool, available space can be limited by various factors including
71physical pool size, quotas, reservations, and other datasets within the pool.</source>
72        <translation type="unfinished">
73            </translation>
74    </message>
75    <message>
76        <source>If this property is set to off, the file system cannot be mounted,
77and is ignored by &apos;zfs mount -a&apos;.  Setting this property to off is
78similar to setting the mountpoint property to none, except that the
79dataset still has a normal mountpoint property, which can be inherited
80Setting this property to off allows datasets to be used solely as a
81mechanism to inherit properties. One example of setting canmount=off is
82to have two datasets with the same mountpoint, so that the children of
83both datasets appear in the same directory, but might have different
84inherited characteristics.</source>
85        <translation type="unfinished">
86            </translation>
87    </message>
88    <message>
89        <source>Controls the checksum used to verify data integrity. The default
90value is on, which automatically selects an appropriate algorithm
91(currently, fletcher4, but this may change in future releases). The
92value off disables integrity checking on user data. Disabling
93checksums is NOT a recommended practice.</source>
94        <translation type="unfinished">
95            </translation>
96    </message>
97    <message>
98        <source>Enables or disables compression for a dataset. The values are on, off, lzjb, zle, gzip,
99and gzip-N. Currently, setting this property to lzjb, gzip, or gzip-N has the same
100effect as setting this property to on. Enabling compression on a file system with
101existing data only compresses new data. Existing data remains uncompressed.</source>
102        <translation type="unfinished">
103            </translation>
104    </message>
105    <message>
106        <source>Read-only property that identifies the compression ratio achieved for a dataset,
107expressed as a multiplier. Compression can be enabled by the zfs set compression=on
108dataset command. The value is calculated from the logical size of all files and the
109amount of referenced physical data. It includes explicit savings through the use of
110the compression property.</source>
111        <translation type="unfinished">
112            </translation>
113    </message>
114    <message>
115        <source>Sets the number of copies of user data per file system. These copies
116are in addition to any pool-level redundancy. Disk space used by
117multiple copies of user data is charged to the corresponding file and
118dataset, and counts against quotas and reservations. In addition, the
119used property is updated when multiple copies are enabled. Consider setting
120this property when the file system is created because changing this property
121on an existing file system only affects newly written data.</source>
122        <translation type="unfinished">
123            </translation>
124    </message>
125    <message>
126        <source>Read-only property that identifies the date and time that a dataset was created.</source>
127        <translation type="unfinished">
128            </translation>
129    </message>
130    <message>
131        <source>Configures deduplication for a dataset. The default value is off.
132The default deduplication checksum is sha256 (this may change in the
133future).  When dedup is enabled, the checksum defined here overrides
134the checksum property. Setting the value to verify has the same
135effect as the setting sha256,verify.
136If set to verify, ZFS will do a byte-to-byte comparsion in case of
137two blocks having the same signature to make sure the block contents
138are identical.</source>
139        <translation type="unfinished">
140            </translation>
141    </message>
142    <message>
143        <source>The devices property is currently not supported on FreeBSD.</source>
144        <translation type="unfinished">
145            </translation>
146    </message>
147    <message>
148        <source>Controls whether processes can be executed from within this file
149system. The default value is on.</source>
150        <translation type="unfinished">
151            </translation>
152    </message>
153    <message>
154        <source>Read-only property that indicates whether a file system, clone, or snapshot
155is currently mounted.</source>
156        <translation type="unfinished">
157            </translation>
158    </message>
159    <message>
160        <source>Controls the mount point used for this file system. When the mountpoint property
161is changed for a file system, the file system and any descendents that inherit the
162mount point are unmounted. If the new value is legacy, then they remain unmounted.
163Otherwise, they are automatically remounted in the new location if the property was
164previously legacy or none, or if they were mounted before the property was changed.
165In addition, any shared file systems are unshared and shared in the new location.</source>
166        <translation type="unfinished">
167            </translation>
168    </message>
169    <message>
170        <source>Controls what is cached in the primary cache (ARC). Possible values are all,
171none, and metadata. If set to all, both user data and metadata are cached. If
172set to none, neither user data nor metadata is cached. If set to metadata, only
173metadata is cached.</source>
174        <translation type="unfinished">
175            </translation>
176    </message>
177    <message>
178        <source>Read-only property for cloned file systems or volumes that identifies
179the snapshot from which the clone was created. The origin cannot be
180destroyed (even with the -r or -f option) as long as a clone exists.
181Non-cloned file systems have an origin of none.</source>
182        <translation type="unfinished">
183            </translation>
184    </message>
185    <message>
186        <source>Limits the amount of disk space a dataset and its descendents can consume.
187This property enforces a hard limit on the amount of disk space used,
188including all space consumed by descendents, such as file systems and snapshots.
189Setting a quota on a descendent of a dataset that already has a quota does not
190override the ancestor&apos;s quota, but rather imposes an additional limit.</source>
191        <translation type="unfinished">
192            </translation>
193    </message>
194    <message>
195        <source>Controls whether a dataset can be modified. When set to on,
196no modifications can be made.</source>
197        <translation type="unfinished">
198            </translation>
199    </message>
200    <message>
201        <source>Specifies a suggested block size for files in the file system. This
202property is designed solely for use with database workloads that
203access files in fixed-size records.  ZFS automatically tunes block
204sizes according to internal algorithms optimized for typical access
205patterns.
206Use of this property for general purpose file systems is strongly
207discouraged, and may adversely affect performance.
208The size specified must be a power of two greater than or equal to
209512 and less than or equal to 128 Kbytes.</source>
210        <translation type="unfinished">
211            </translation>
212    </message>
213    <message>
214        <source>Read-only property that identifies the amount of data accessible by a
215dataset, which might or might not be shared with other datasets in the
216pool.</source>
217        <translation type="unfinished">
218            </translation>
219    </message>
220    <message>
221        <source>Sets the amount of disk space that a dataset can consume. This property
222enforces a hard limit on the amount of space used. This hard limit does
223not include disk space used by descendents, such as snapshots and clones.</source>
224        <translation type="unfinished">
225            </translation>
226    </message>
227    <message>
228        <source>Sets the minimum amount of disk space that is guaranteed to a dataset, not
229including descendents, such as snapshots and clones. When the amount of disk
230space used is below this value, the dataset is treated as if it were taking up
231the amount of space specified by refreservation. The refreservation reservation
232is accounted for in the parent dataset&apos;s disk space used, and counts against
233the parent dataset&apos;s quotas and reservations.
234If refreservation is set, a snapshot is only allowed if enough free pool space
235is available outside of this reservation to accommodate the current number of
236referenced bytes in the dataset.</source>
237        <translation type="unfinished">
238            </translation>
239    </message>
240    <message>
241        <source>Sets the minimum amount of disk space guaranteed to a dataset and its descendents.
242When the amount of disk space used is below this value, the dataset is treated as if
243it were using the amount of space specified by its reservation. Reservations are
244accounted for in the parent dataset&apos;s disk space used, and count against the parent
245dataset&apos;s quotas and reservations.</source>
246        <translation type="unfinished">
247            </translation>
248    </message>
249    <message>
250        <source>Controls what is cached in the secondary cache (L2ARC). Possible values are all, none,
251and metadata. If set to all, both user data and metadata are cached. If set to none,
252neither user data nor metadata is cached. If set to metadata, only metadata is cached.</source>
253        <translation type="unfinished">
254            </translation>
255    </message>
256    <message>
257        <source>Controls whether the setuid bit is honored in a file system.</source>
258        <translation type="unfinished">
259            </translation>
260    </message>
261    <message>
262        <source>Controls whether a file system is available over NFS and what
263options are used. If set to on, the zfs share command is invoked
264with no options. Otherwise, the zfs share command is invoked with
265options equivalent to the contents of this property.</source>
266        <translation type="unfinished">
267            </translation>
268    </message>
269    <message>
270        <source>The sharesmb property has currently no effect on FreeBSD.</source>
271        <translation type="unfinished">
272            </translation>
273    </message>
274    <message>
275        <source>Controls whether the .zfs directory is hidden or visible in the root of the file system.</source>
276        <translation type="unfinished">
277            </translation>
278    </message>
279    <message>
280        <source>Read-only property that identifies the dataset type as filesystem (file system or clone), volume, or snapshot.</source>
281        <translation type="unfinished">
282            </translation>
283    </message>
284    <message>
285        <source>Read-only property that identifies the amount of disk space consumed by a dataset and all its descendents.</source>
286        <translation type="unfinished">
287            </translation>
288    </message>
289    <message>
290        <source>Read-only property that identifies the amount of disk space that is used by
291children of this dataset, which would be freed if all the dataset&apos;s children
292were destroyed.</source>
293        <translation type="unfinished">
294            </translation>
295    </message>
296    <message>
297        <source>Read-only property that identifies the amount of disk space that is used by
298a dataset itself, which would be freed if the dataset was destroyed, after
299first destroying any snapshots and removing any refreservation reservations.</source>
300        <translation type="unfinished">
301            </translation>
302    </message>
303    <message>
304        <source>Read-only property that identifies the amount of disk space that is used by a
305refreservation set on a dataset, which would be freed if the refreservation was
306removed.</source>
307        <translation type="unfinished">
308            </translation>
309    </message>
310    <message>
311        <source>Read-only property that identifies the amount of disk space that is consumed
312by snapshots of a dataset. In particular, it is the amount of disk space that
313would be freed if all of this dataset&apos;s snapshots were destroyed. Note that
314this value is not simply the sum of the snapshots&apos; used properties, because
315space can be shared by multiple snapshots.</source>
316        <translation type="unfinished">
317            </translation>
318    </message>
319    <message>
320        <source>Identifies the on-disk version of a file system, which is independent of the
321pool version. This property can only be set to a later version that is available
322from the supported software release.</source>
323        <translation type="unfinished">
324            </translation>
325    </message>
326    <message>
327        <source>For volumes, specifies the logical size of the volume.</source>
328        <translation type="unfinished">
329            </translation>
330    </message>
331    <message>
332        <source>For volumes, specifies the block size of the volume.</source>
333        <translation type="unfinished">
334            </translation>
335    </message>
336    <message>
337        <source>Indicates whether a dataset has been added to a jail.</source>
338        <translation type="unfinished">
339            </translation>
340    </message>
341    <message>
342        <source>This property is not supported on FreeBSD.</source>
343        <translation type="unfinished">
344            </translation>
345    </message>
346    <message>
347        <source>The file system is marked to be destroyed after unmount.</source>
348        <translation type="unfinished">
349            </translation>
350    </message>
351    <message>
352        <source>The compression ratio achieved for the referenced space of this
353dataset, expressed as a multiplier.</source>
354        <translation type="unfinished">
355            </translation>
356    </message>
357    <message>
358        <source>The amount of referenced space written to this dataset since the
359previous snapshot.</source>
360        <translation type="unfinished">
361            </translation>
362    </message>
363    <message>
364        <source>This property is set to the number of user holds on this snapshot.
365</source>
366        <translation type="unfinished">
367            </translation>
368    </message>
369    <message>
370        <source>Provide a hint to ZFS about handling of synchronous requests in this
371dataset.  If logbias is set to latency (the default), ZFS will use
372pool log devices (if configured) to handle the requests at low
373latency. If logbias is set to throughput, ZFS will not use configured
374pool log devices.  ZFS will instead optimize synchronous operations
375for global pool throughput and efficient use of resources.</source>
376        <translation type="unfinished">
377            </translation>
378    </message>
379    <message>
380        <source>Controls the behavior of synchronous requests (e.g.  fsync(2),
381O_DSYNC). This property accepts the following values:
382standard  This is the POSIX specified behavior of ensuring all
383          synchronous requests are written to stable storage and
384          all devices are flushed to ensure data is not cached by
385          device controllers (this is the default).
386always    All file system transactions are written and flushed
387          before their system calls return. This has a large
388          performance penalty.
389disabled  Disables synchronous requests. File system transactions
390          are only committed to stable storage periodically. This
391          option will give the highest performance.  However, it
392          is very dangerous as ZFS would be ignoring the synchro-
393          nous transaction demands of applications such as data-
394          bases or NFS.  Administrators should only use this
395          option when the risks are understood.</source>
396        <translation type="unfinished">
397            </translation>
398    </message>
399    <message>
400        <source>This property cannot be changed after the system is created.</source>
401        <translation type="unfinished">
402            </translation>
403    </message>
404    <message>
405        <source>User Property</source>
406        <translation type="unfinished">
407            </translation>
408    </message>
409    <message>
410        <source>Unknown property or information not available.
411Read ZFS manual for more information.</source>
412        <translation type="unfinished">
413            </translation>
414    </message>
415    <message>
416        <source>[Invalid]</source>
417        <translation type="unfinished">
418            </translation>
419    </message>
420    <message>
421        <source>[Inherit]</source>
422        <translation type="unfinished">
423            </translation>
424    </message>
425    <message>
426        <source>[Added]</source>
427        <translation type="unfinished">
428            </translation>
429    </message>
430    <message>
431        <source>[Changed]</source>
432        <translation type="unfinished">
433            </translation>
434    </message>
435    <message>
436        <source>User property</source>
437        <translation>甚户属性</translation>
438    </message>
439    <message>
440        <source>Device Menu</source>
441        <translation>讟倇菜单</translation>
442    </message>
443    <message>
444        <source>Add new user property</source>
445        <translation>添加新甚户属性</translation>
446    </message>
447    <message>
448        <source>Delete user property</source>
449        <translation>删陀甚户属性</translation>
450    </message>
451</context>
452<context>
453    <name>DialogMount</name>
454    <message>
455        <source>Dialog</source>
456        <translation>对话</translation>
457    </message>
458    <message>
459        <source>Device to mount:</source>
460        <translation>芁挂蜜的讟倇</translation>
461    </message>
462    <message>
463        <source>(Device)</source>
464        <translation>(讟倇)</translation>
465    </message>
466    <message>
467        <source>Mount location:</source>
468        <translation>挂蜜䜍眮</translation>
469    </message>
470    <message>
471        <source>...</source>
472        <translation>

</translation>
473    </message>
474    <message>
475        <source>Select Directory</source>
476        <translation>选择目圕</translation>
477    </message>
478</context>
479<context>
480    <name>DialogName</name>
481    <message>
482        <source>Dialog</source>
483        <translation>对话</translation>
484    </message>
485    <message>
486        <source>Pool name:</source>
487        <translation>池名称</translation>
488    </message>
489    <message>
490        <source>Do not mount any filesystems</source>
491        <translation type="unfinished">
492            </translation>
493    </message>
494    <message>
495        <source>Read only pool</source>
496        <translation type="unfinished">
497            </translation>
498    </message>
499    <message>
500        <source>Import options:</source>
501        <translation type="unfinished">
502            </translation>
503    </message>
504    <message>
505        <source>Mount with alternative root:</source>
506        <translation type="unfinished">
507            </translation>
508    </message>
509    <message>
510        <source>Mount all filesystems automatically</source>
511        <translation type="unfinished">
512            </translation>
513    </message>
514    <message>
515        <source>Mounting behavior:</source>
516        <translation type="unfinished">
517            </translation>
518    </message>
519    <message>
520        <source>Force operation if error (use with caution)</source>
521        <translation type="unfinished">
522            </translation>
523    </message>
524</context>
525<context>
526    <name>DialogNewPool</name>
527    <message>
528        <source>Dialog</source>
529        <translation type="unfinished">
530            </translation>
531    </message>
532    <message>
533        <source>Selected</source>
534        <translation type="unfinished">
535            </translation>
536    </message>
537    <message>
538        <source>Pool name:</source>
539        <translation type="unfinished">
540            </translation>
541    </message>
542    <message>
543        <source>Configuration type:</source>
544        <translation type="unfinished">
545            </translation>
546    </message>
547    <message>
548        <source>Striped</source>
549        <translation type="unfinished">
550            </translation>
551    </message>
552    <message>
553        <source>Mirror</source>
554        <translation type="unfinished">
555            </translation>
556    </message>
557    <message>
558        <source>Raid-Z (single parity)</source>
559        <translation type="unfinished">
560            </translation>
561    </message>
562    <message>
563        <source>Raid-Z2 (double parity)</source>
564        <translation type="unfinished">
565            </translation>
566    </message>
567    <message>
568        <source>Raid-Z3 (triple parity)</source>
569        <translation type="unfinished">
570            </translation>
571    </message>
572    <message>
573        <source>Cache</source>
574        <translation type="unfinished">
575            </translation>
576    </message>
577    <message>
578        <source>Log</source>
579        <translation type="unfinished">
580            </translation>
581    </message>
582    <message>
583        <source>Spare</source>
584        <translation type="unfinished">
585            </translation>
586    </message>
587    <message>
588        <source>Error Description Here</source>
589        <translation type="unfinished">
590            </translation>
591    </message>
592    <message>
593        <source>Must provide a valid pool name</source>
594        <translation type="unfinished">
595            </translation>
596    </message>
597    <message>
598        <source>Must select exactly %1 devices</source>
599        <translation type="unfinished">
600            </translation>
601    </message>
602    <message>
603        <source>Must select at least one device</source>
604        <translation type="unfinished">
605            </translation>
606    </message>
607</context>
608<context>
609    <name>DialogPartition</name>
610    <message>
611        <source>Add Partition</source>
612        <translation type="unfinished">
613            </translation>
614    </message>
615    <message>
616        <source>Add new slice/partition</source>
617        <translation type="unfinished">
618            </translation>
619    </message>
620    <message>
621        <source>100 GB</source>
622        <translation type="unfinished">
623            </translation>
624    </message>
625    <message>
626        <source>Device:</source>
627        <translation type="unfinished">
628            </translation>
629    </message>
630    <message>
631        <source>ada0</source>
632        <translation type="unfinished">
633            </translation>
634    </message>
635    <message>
636        <source>Largest available free block:</source>
637        <translation type="unfinished">
638            </translation>
639    </message>
640    <message>
641        <source>Total Size:</source>
642        <translation type="unfinished">
643            </translation>
644    </message>
645    <message>
646        <source>Current layout:</source>
647        <translation type="unfinished">
648            </translation>
649    </message>
650    <message>
651        <source>Designation</source>
652        <translation type="unfinished">
653            </translation>
654    </message>
655    <message>
656        <source>Start Sector</source>
657        <translation type="unfinished">
658            </translation>
659    </message>
660    <message>
661        <source>Sector Count</source>
662        <translation type="unfinished">
663            </translation>
664    </message>
665    <message>
666        <source>Size</source>
667        <translation type="unfinished">
668            </translation>
669    </message>
670    <message>
671        <source>Color</source>
672        <translation type="unfinished">
673            </translation>
674    </message>
675    <message>
676        <source>New partition Size:</source>
677        <translation type="unfinished">
678            </translation>
679    </message>
680    <message>
681        <source>bytes</source>
682        <translation type="unfinished">
683            </translation>
684    </message>
685    <message>
686        <source>kB</source>
687        <translation>kB</translation>
688    </message>
689    <message>
690        <source>MB</source>
691        <translation>MB</translation>
692    </message>
693    <message>
694        <source>GB</source>
695        <translation>GB</translation>
696    </message>
697    <message>
698        <source>TB</source>
699        <translation>TB</translation>
700    </message>
701    <message>
702        <source>Partition type:</source>
703        <translation>分区类型</translation>
704    </message>
705    <message>
706        <source>freebsd-zfs</source>
707        <translation>freebsd-zfs</translation>
708    </message>
709    <message>
710        <source>freebsd-ufs</source>
711        <translation>freebsd-ufs</translation>
712    </message>
713    <message>
714        <source>freebsd</source>
715        <translation>freebsd</translation>
716    </message>
717    <message>
718        <source>freebsd-boot</source>
719        <translation>freebsd-boot</translation>
720    </message>
721    <message>
722        <source>freebsd-swap</source>
723        <translation>freebsd-swap</translation>
724    </message>
725    <message>
726        <source>bios-boot</source>
727        <translation>bios-boot</translation>
728    </message>
729    <message>
730        <source>efi</source>
731        <translation>efi</translation>
732    </message>
733    <message>
734        <source>Create and initialize a new filesystem</source>
735        <translation type="unfinished">
736            </translation>
737    </message>
738    <message>
739        <source>** FREE **</source>
740        <translation type="unfinished">
741            </translation>
742    </message>
743    <message>
744        <source>No free space!</source>
745        <translation type="unfinished">
746            </translation>
747    </message>
748</context>
749<context>
750    <name>DialogProp</name>
751    <message>
752        <source>Edit Pool Properties</source>
753        <translation type="unfinished">
754            </translation>
755    </message>
756    <message>
757        <source>Property</source>
758        <translation type="unfinished">
759            </translation>
760    </message>
761    <message>
762        <source>Value</source>
763        <translation type="unfinished">
764            </translation>
765    </message>
766    <message>
767        <source>Total size of the storage pool.</source>
768        <translation type="unfinished">
769            </translation>
770    </message>
771    <message>
772        <source>Percentage of pool space used.</source>
773        <translation type="unfinished">
774            </translation>
775    </message>
776    <message>
777        <source>Alternate root directory. If set, this directory is prepended to any
778mount points within the pool. This can be used when examining an
779unknown pool where the mount points cannot be trusted, or in an
780alternate boot environment, where the typical paths are not valid.
781altroot is not a persistent property. It is valid only while the
782system is up.  Setting altroot defaults to using cachefile=none, though
783this may be overridden using an explicit setting.</source>
784        <translation type="unfinished">
785            </translation>
786    </message>
787    <message>
788        <source>The current health of the pool.</source>
789        <translation type="unfinished">
790            </translation>
791    </message>
792    <message>
793        <source>A unique identifier for the pool.</source>
794        <translation type="unfinished">
795            </translation>
796    </message>
797    <message>
798        <source>The current on-disk version of the pool. This can be increased, but
799never decreased. The preferred method of updating pools is with the
800&quot;zpool upgrade&quot; command, though this property can be used when a
801specific version is needed for backwards compatibility. This property
802can be any number between 1 and the current version reported by
803&quot;zpool upgrade -v&quot;.</source>
804        <translation type="unfinished">
805            </translation>
806    </message>
807    <message>
808        <source>Identifies the default bootable dataset for the root pool. This
809property is expected to be set mainly by the installation and upgrade
810programs.</source>
811        <translation type="unfinished">
812            </translation>
813    </message>
814    <message>
815        <source>Controls whether a non-privileged user is granted access based on the
816dataset permissions defined on the dataset. See zfs(8) for more
817information on ZFS delegated administration.</source>
818        <translation type="unfinished">
819            </translation>
820    </message>
821    <message>
822        <source>Controls automatic device replacement. If set to &quot;off&quot;, device
823replacement must be initiated by the administrator by using the
824&quot;zpool replace&quot; command. If set to &quot;on&quot;, any new device, found in the
825same physical location as a device that previously belonged to the
826pool, is automatically formatted and replaced. The default behavior
827is &quot;off&quot;.  This property can also be referred to by its shortened
828column name, &quot;replace&quot;.</source>
829        <translation type="unfinished">
830            </translation>
831    </message>
832    <message>
833        <source>Controls whether information about snapshots associated with this
834pool is output when &quot;zfs list&quot; is run without the -t option. The
835default value is off.</source>
836        <translation type="unfinished">
837            </translation>
838    </message>
839    <message>
840        <source>Controls automatic pool expansion when the underlying LUN is grown.
841If set to &quot;on&quot;, the pool will be resized according to the size of the
842expanded device. If the device is part of a mirror or raidz then all
843devices within that mirror/raidz group must be expanded before the
844new space is made available to the pool. The default behavior is
845&quot;off&quot;.  This property can also be referred to by its shortened column
846name, expand.</source>
847        <translation type="unfinished">
848            </translation>
849    </message>
850    <message>
851        <source>Threshold for the number of block ditto copies. If the reference
852count for a deduplicated block increases above this number, a new
853ditto copy of this block is automatically stored. Default setting is
8540.</source>
855        <translation type="unfinished">
856            </translation>
857    </message>
858    <message>
859        <source>The deduplication ratio specified for a pool, expressed as a multiplier. For
860example, a value of 1.76 indicates that 1.76 units of data were stored but
861only 1 unit of disk space was actually consumed. See zfs(8) for a description
862of the deduplication feature.</source>
863        <translation type="unfinished">
864            </translation>
865    </message>
866    <message>
867        <source>Number of blocks within the pool that are not allocated.</source>
868        <translation type="unfinished">
869            </translation>
870    </message>
871    <message>
872        <source>Amount of storage space within the pool that has been physically allocated.</source>
873        <translation type="unfinished">
874            </translation>
875    </message>
876    <message>
877        <source>An arbitrary comment string set by the administrator.</source>
878        <translation type="unfinished">
879            </translation>
880    </message>
881    <message>
882        <source>This property has currently no value on FreeBSD.</source>
883        <translation type="unfinished">
884            </translation>
885    </message>
886    <message>
887        <source>Controls the location of where the pool configuration is cached.
888Discovering all pools on system startup requires a cached copy of the
889configuration data that is stored on the root file system. All pools
890in this cache are automatically imported when the system boots. Some
891environments, such as install and clustering, need to cache this
892information in a different location so that pools are not automatically
893imported. Setting this property caches the pool configuration
894in a different location that can later be imported with &quot;zpool import
895-c&quot;.  Setting it to the special value &quot;none&quot; creates a temporary pool
896that is never cached, and the special value &apos;&apos; (empty string) uses
897the default location.</source>
898        <translation type="unfinished">
899            </translation>
900    </message>
901    <message>
902        <source>If set to on, pool will be imported in read-only mode with the
903following restrictions:
904  *   Synchronous data in the intent log will not be accessible
905  *   Properties of the pool can not be changed
906  *   Datasets of this pool can only be mounted read-only
907  *   To write to a read-only pool, a export and import of the pool
908      is required.
909</source>
910        <translation type="unfinished">
911            </translation>
912    </message>
913    <message>
914        <source>Controls the system behavior in the event of catastrophic pool failure
915This condition is typically a result of a loss of connectivity
916to the underlying storage device(s) or a failure of all devices
917within the pool. The behavior of such an event is determined as follows
918wait
919Blocks all I/O access until the device connectivity is recovered
920and the errors are cleared. This is the default behavior
921continue
922Returns EIO to any new write I/O requests but allows reads to
923any of the remaining healthy devices. Any write requests that
924have yet to be committed to disk would be blocked.
925
926panic
927Prints out a message to the console and generates a system
928crash dump.
929</source>
930        <translation type="unfinished"></translation>
931    </message>
932</context>
933<context>
934    <name>DialogfsCreate</name>
935    <message>
936        <source>New Filesystem</source>
937        <translation type="unfinished">
938            </translation>
939    </message>
940    <message>
941        <source>Name:</source>
942        <translation type="unfinished">
943            </translation>
944    </message>
945    <message>
946        <source>Properties override at creation time:</source>
947        <translation type="unfinished">
948            </translation>
949    </message>
950    <message>
951        <source>Prevent auto mount (canmount=noauto)</source>
952        <translation type="unfinished">
953            </translation>
954    </message>
955    <message>
956        <source>Mountpoint</source>
957        <translation type="unfinished">
958            </translation>
959    </message>
960    <message>
961        <source>none</source>
962        <translation type="unfinished">
963            </translation>
964    </message>
965    <message>
966        <source>legacy</source>
967        <translation type="unfinished">
968            </translation>
969    </message>
970    <message>
971        <source>[path]</source>
972        <translation type="unfinished">
973            </translation>
974    </message>
975    <message>
976        <source>Force UTF-8 only (utf8only=on)</source>
977        <translation type="unfinished">
978            </translation>
979    </message>
980    <message>
981        <source>Unicode normalization =</source>
982        <translation type="unfinished">
983            </translation>
984    </message>
985    <message>
986        <source>formD</source>
987        <translation type="unfinished">
988            </translation>
989    </message>
990    <message>
991        <source>formKCF</source>
992        <translation type="unfinished">
993            </translation>
994    </message>
995    <message>
996        <source>Copies =</source>
997        <translation type="unfinished">
998            </translation>
999    </message>
1000    <message>
1001        <source>Deduplication (dedup=on)</source>
1002        <translation type="unfinished">
1003            </translation>
1004    </message>
1005    <message>
1006        <source>Compression =</source>
1007        <translation type="unfinished">
1008            </translation>
1009    </message>
1010    <message>
1011        <source>off</source>
1012        <translation type="unfinished">
1013            </translation>
1014    </message>
1015    <message>
1016        <source>on</source>
1017        <translation type="unfinished">
1018            </translation>
1019    </message>
1020    <message>
1021        <source>lzjb</source>
1022        <translation type="unfinished">
1023            </translation>
1024    </message>
1025    <message>
1026        <source>zle</source>
1027        <translation type="unfinished">
1028            </translation>
1029    </message>
1030    <message>
1031        <source>gzip</source>
1032        <translation type="unfinished">
1033            </translation>
1034    </message>
1035    <message>
1036        <source>gzip-1</source>
1037        <translation type="unfinished">
1038            </translation>
1039    </message>
1040    <message>
1041        <source>gzip-2</source>
1042        <translation type="unfinished">
1043            </translation>
1044    </message>
1045    <message>
1046        <source>gzip-3</source>
1047        <translation type="unfinished">
1048            </translation>
1049    </message>
1050    <message>
1051        <source>gzip-4</source>
1052        <translation type="unfinished">
1053            </translation>
1054    </message>
1055    <message>
1056        <source>gzip-5</source>
1057        <translation type="unfinished">
1058            </translation>
1059    </message>
1060    <message>
1061        <source>gzip-6</source>
1062        <translation type="unfinished">
1063            </translation>
1064    </message>
1065    <message>
1066        <source>gzip-7</source>
1067        <translation type="unfinished">
1068            </translation>
1069    </message>
1070    <message>
1071        <source>gzip-8</source>
1072        <translation type="unfinished">
1073            </translation>
1074    </message>
1075    <message>
1076        <source>gzip-9</source>
1077        <translation type="unfinished">
1078            </translation>
1079    </message>
1080</context>
1081<context>
1082    <name>ZManagerWindow</name>
1083    <message>
1084        <source>PCBSD Disk Manager</source>
1085        <translation type="unfinished">
1086            </translation>
1087    </message>
1088    <message>
1089        <source>Disks</source>
1090        <translation type="unfinished">
1091            </translation>
1092    </message>
1093    <message>
1094        <source>Device</source>
1095        <translation type="unfinished">
1096            </translation>
1097    </message>
1098    <message>
1099        <source>State</source>
1100        <translation type="unfinished">
1101            </translation>
1102    </message>
1103    <message>
1104        <source>ZFS Pools</source>
1105        <translation type="unfinished">
1106            </translation>
1107    </message>
1108    <message>
1109        <source>Pool Name</source>
1110        <translation type="unfinished">
1111            </translation>
1112    </message>
1113    <message>
1114        <source>Status:</source>
1115        <translation type="unfinished">
1116            </translation>
1117    </message>
1118    <message>
1119        <source>TextLabel</source>
1120        <translation type="unfinished">
1121            </translation>
1122    </message>
1123    <message>
1124        <source>Clear Error</source>
1125        <translation type="unfinished">
1126            </translation>
1127    </message>
1128    <message>
1129        <source>poolname</source>
1130        <translation type="unfinished">
1131            </translation>
1132    </message>
1133    <message>
1134        <source>ZFS Filesystems</source>
1135        <translation type="unfinished">
1136            </translation>
1137    </message>
1138    <message>
1139        <source>Filesystems</source>
1140        <translation type="unfinished">
1141            </translation>
1142    </message>
1143    <message>
1144        <source>Status</source>
1145        <translation type="unfinished">
1146            </translation>
1147    </message>
1148    <message>
1149        <source>Refreshing...</source>
1150        <translation type="unfinished">
1151            </translation>
1152    </message>
1153    <message>
1154        <source>No pools available, right click to create a new one...</source>
1155        <translation type="unfinished">
1156            </translation>
1157    </message>
1158    <message>
1159        <source> (No media in drive)</source>
1160        <translation type="unfinished">
1161            </translation>
1162    </message>
1163    <message>
1164        <source>Avaliable</source>
1165        <translation type="unfinished">
1166            </translation>
1167    </message>
1168    <message>
1169        <source>No disk</source>
1170        <translation type="unfinished">
1171            </translation>
1172    </message>
1173    <message>
1174        <source>ZPool: </source>
1175        <translation type="unfinished">
1176            </translation>
1177    </message>
1178    <message>
1179        <source>Sliced</source>
1180        <translation type="unfinished">
1181            </translation>
1182    </message>
1183    <message>
1184        <source>Mounted: </source>
1185        <translation type="unfinished">
1186            </translation>
1187    </message>
1188    <message>
1189        <source>Available</source>
1190        <translation type="unfinished">
1191            </translation>
1192    </message>
1193    <message>
1194        <source>Unmounted</source>
1195        <translation type="unfinished">
1196            </translation>
1197    </message>
1198    <message>
1199        <source>Partitioned</source>
1200        <translation type="unfinished">
1201            </translation>
1202    </message>
1203    <message>
1204        <source>(Exported)
1205</source>
1206        <translation type="unfinished">
1207            </translation>
1208    </message>
1209    <message>
1210        <source>(Destroyed)
1211</source>
1212        <translation type="unfinished">
1213            </translation>
1214    </message>
1215    <message>
1216        <source>Offline</source>
1217        <translation type="unfinished">
1218            </translation>
1219    </message>
1220    <message>
1221        <source>Online</source>
1222        <translation type="unfinished">
1223            </translation>
1224    </message>
1225    <message>
1226        <source>Degraded</source>
1227        <translation type="unfinished">
1228            </translation>
1229    </message>
1230    <message>
1231        <source>Faulted</source>
1232        <translation type="unfinished">
1233            </translation>
1234    </message>
1235    <message>
1236        <source>Removed</source>
1237        <translation type="unfinished">
1238            </translation>
1239    </message>
1240    <message>
1241        <source>Unavailable</source>
1242        <translation type="unfinished">
1243            </translation>
1244    </message>
1245    <message>
1246        <source>Unknown</source>
1247        <translation type="unfinished">
1248            </translation>
1249    </message>
1250    <message>
1251        <source>Create new pool</source>
1252        <translation type="unfinished">
1253            </translation>
1254    </message>
1255    <message>
1256        <source>Rename pool</source>
1257        <translation type="unfinished">
1258            </translation>
1259    </message>
1260    <message>
1261        <source>Destroy pool</source>
1262        <translation type="unfinished">
1263            </translation>
1264    </message>
1265    <message>
1266        <source>Add devices...</source>
1267        <translation type="unfinished">
1268            </translation>
1269    </message>
1270    <message>
1271        <source>Add log devices...</source>
1272        <translation type="unfinished">
1273            </translation>
1274    </message>
1275    <message>
1276        <source>Add cache devices...</source>
1277        <translation type="unfinished">
1278            </translation>
1279    </message>
1280    <message>
1281        <source>Add spare devices...</source>
1282        <translation type="unfinished">
1283            </translation>
1284    </message>
1285    <message>
1286        <source>Scrub</source>
1287        <translation type="unfinished">
1288            </translation>
1289    </message>
1290    <message>
1291        <source>Export pool</source>
1292        <translation type="unfinished">
1293            </translation>
1294    </message>
1295    <message>
1296        <source>Import pool</source>
1297        <translation type="unfinished">
1298            </translation>
1299    </message>
1300    <message>
1301        <source>Recover destroyed pool</source>
1302        <translation type="unfinished">
1303            </translation>
1304    </message>
1305    <message>
1306        <source>Properties...</source>
1307        <translation type="unfinished">
1308            </translation>
1309    </message>
1310    <message>
1311        <source>Attach (mirror) device...</source>
1312        <translation type="unfinished">
1313            </translation>
1314    </message>
1315    <message>
1316        <source>Detach from mirror</source>
1317        <translation type="unfinished">
1318            </translation>
1319    </message>
1320    <message>
1321        <source>Take offline</source>
1322        <translation type="unfinished">
1323            </translation>
1324    </message>
1325    <message>
1326        <source>Bring online</source>
1327        <translation type="unfinished">
1328            </translation>
1329    </message>
1330    <message>
1331        <source>Remove</source>
1332        <translation type="unfinished">
1333            </translation>
1334    </message>
1335    <message>
1336        <source>zpool Menu</source>
1337        <translation type="unfinished">
1338            </translation>
1339    </message>
1340    <message>
1341        <source>Device Menu</source>
1342        <translation type="unfinished">
1343            </translation>
1344    </message>
1345    <message>
1346        <source>Unmount</source>
1347        <translation>取消挂蜜</translation>
1348    </message>
1349    <message>
1350        <source>Mount</source>
1351        <translation>挂蜜</translation>
1352    </message>
1353    <message>
1354        <source>Create MBR partition table</source>
1355        <translation>创建MBR分区衚</translation>
1356    </message>
1357    <message>
1358        <source>Create GPT partition table</source>
1359        <translation>创建GPT分区衚</translation>
1360    </message>
1361    <message>
1362        <source>Create BSD partition table</source>
1363        <translation>创建BSD分区衚</translation>
1364    </message>
1365    <message>
1366        <source>Delete Partition Table</source>
1367        <translation>删陀分区衚</translation>
1368    </message>
1369    <message>
1370        <source>Add new slice</source>
1371        <translation>添加新slice</translation>
1372    </message>
1373    <message>
1374        <source>Add new partition</source>
1375        <translation>添加新分区</translation>
1376    </message>
1377    <message>
1378        <source>Destroy this slice</source>
1379        <translation>销毁这䞪slice</translation>
1380    </message>
1381    <message>
1382        <source>Destroy this partition</source>
1383        <translation>销毁这䞪分区</translation>
1384    </message>
1385    <message>
1386        <source>Warning</source>
1387        <translation>è­Šå‘Š</translation>
1388    </message>
1389    <message>
1390        <source>This operation cannot be undone.
1391OK to destroy the slice/partition?</source>
1392        <translation>歀操䜜无法被撀销。
1393确定芁销毁slice或分区吗</translation>
1394    </message>
1395    <message>
1396        <source>Error report</source>
1397        <translation>错误报告</translation>
1398    </message>
1399    <message>
1400        <source>Create new zpool</source>
1401        <translation>创建新的zpool</translation>
1402    </message>
1403    <message>
1404        <source>Important information</source>
1405        <translation>重芁信息</translation>
1406    </message>
1407    <message>
1408        <source>The pool was imported in read-only mode, therefore attempting to destroy the pool will leave the pool in the state it was when imported, not necessarily destroyed.</source>
1409        <translation type="unfinished">
1410            </translation>
1411    </message>
1412    <message>
1413        <source>Attach mirror devices to </source>
1414        <translation type="unfinished">
1415            </translation>
1416    </message>
1417    <message>
1418        <source>The pool was imported in read-only mode, therefore attempting to export the pool will leave the pool in the state it was when imported, not necessarily exported.</source>
1419        <translation type="unfinished">
1420            </translation>
1421    </message>
1422    <message>
1423        <source>Recover destroyed pool as...</source>
1424        <translation type="unfinished">
1425            </translation>
1426    </message>
1427    <message>
1428        <source>Import pool as...</source>
1429        <translation type="unfinished">
1430            </translation>
1431    </message>
1432    <message>
1433        <source>The pool was imported in read-only mode, it cannot be renamed.</source>
1434        <translation type="unfinished">
1435            </translation>
1436    </message>
1437    <message>
1438        <source>Add more devices to zpool</source>
1439        <translation type="unfinished">
1440            </translation>
1441    </message>
1442    <message>
1443        <source>Add log devices to zpool</source>
1444        <translation type="unfinished">
1445            </translation>
1446    </message>
1447    <message>
1448        <source>Add cache devices to zpool</source>
1449        <translation type="unfinished">
1450            </translation>
1451    </message>
1452    <message>
1453        <source>Add spare devices to zpool</source>
1454        <translation type="unfinished">
1455            </translation>
1456    </message>
1457    <message>
1458        <source>[Mounted]</source>
1459        <translation type="unfinished">
1460            </translation>
1461    </message>
1462    <message>
1463        <source>[Not Mounted]</source>
1464        <translation type="unfinished">
1465            </translation>
1466    </message>
1467    <message>
1468        <source> of </source>
1469        <translation type="unfinished">
1470            </translation>
1471    </message>
1472    <message>
1473        <source>Rename dataset</source>
1474        <translation type="unfinished">
1475            </translation>
1476    </message>
1477    <message>
1478        <source>Create new dataset</source>
1479        <translation type="unfinished">
1480            </translation>
1481    </message>
1482    <message>
1483        <source>Create a clone dataset</source>
1484        <translation type="unfinished">
1485            </translation>
1486    </message>
1487    <message>
1488        <source>Destroy dataset</source>
1489        <translation type="unfinished">
1490            </translation>
1491    </message>
1492    <message>
1493        <source>Promote filesystem</source>
1494        <translation type="unfinished">
1495            </translation>
1496    </message>
1497    <message>
1498        <source>Take a snapshot</source>
1499        <translation type="unfinished">
1500            </translation>
1501    </message>
1502    <message>
1503        <source>Destroy snapshot</source>
1504        <translation type="unfinished">
1505            </translation>
1506    </message>
1507    <message>
1508        <source>Rollback to this snapshot</source>
1509        <translation type="unfinished">
1510            </translation>
1511    </message>
1512    <message>
1513        <source>Edit properties</source>
1514        <translation type="unfinished">
1515            </translation>
1516    </message>
1517    <message>
1518        <source>zfs Menu</source>
1519        <translation type="unfinished">
1520            </translation>
1521    </message>
1522    <message>
1523        <source>Confirmation</source>
1524        <translation type="unfinished">
1525            </translation>
1526    </message>
1527    <message>
1528        <source>Take a new snapshot</source>
1529        <translation type="unfinished">
1530            </translation>
1531    </message>
1532    <message>
1533        <source>New name</source>
1534        <translation type="unfinished">
1535            </translation>
1536    </message>
1537    <message>
1538        <source>This operation cannot be undone and will cause all data added after the snapshot to be lost.
1539Any snapshots created after this one will be deleted, along with any clone filesystems that depend on them.
1540</source>
1541        <translation type="unfinished">
1542            </translation>
1543    </message>
1544    <message>
1545        <source>This pool had been destroyed, and its disks may have been reused. Attempting to recover will destroy any new data that could&apos;ve been stored in the devices that were reused and cannot be recovered.
1546Proceed with recovery?</source>
1547        <translation type="unfinished">
1548            </translation>
1549    </message>
1550    <message>
1551        <source>An error was detected while executing &apos;%1&apos;:
1552
1553</source>
1554        <translation type="unfinished"></translation>
1555    </message>
1556    <message>
1557        <source>An error was detected while executing &apos;zpool&apos;:
1558
1559</source>
1560        <translation type="unfinished"></translation>
1561    </message>
1562    <message>
1563        <source>An error was detected while executing &apos;zfs&apos;:
1564
1565</source>
1566        <translation type="unfinished"></translation>
1567    </message>
1568    <message>
1569        <source>This operation cannot be undone and will cause data loss.
1570
1571You are about to perform the following operation(s):
1572
1573</source>
1574        <translation type="unfinished"></translation>
1575    </message>
1576    <message>
1577        <source>
1578
1579Are you sure you want to proceed?
1580
1581</source>
1582        <translation type="unfinished"></translation>
1583    </message>
1584</context>
1585</TS>
Note: See TracBrowser for help on using the repository browser.