ticket summary component version milestone type owner status created _changetime _description _reporter 238 Booting Wireless 3945ABG error Crash Handler 8.0-RC 8.0 System Defect tim closed 2010-02-07T04:41:21-08:00 2010-05-05T03:29:35-07:00 "Cant do any booting from my USB stick on Acer Aspire 5920G. wpi0 tells me that could not allocate memory resource. [[Image(http://www.imagechicken.com/uploads/1265282783079037200.jpg)]] [http://forums.pcbsd.org/viewtopic.php?f=12&t=14947&sid=6b885a01f96313134d49a25539edfe98]." kavolorn 366 IEEE 1394 (fire wire) Problems Crash Handler 8.1 8.2 System Defect tim closed 2011-03-02T05:52:08-08:00 2011-03-08T12:53:38-08:00 " While installing pc-bsd 8.2 no problem .After installing during first boot system shows these message == run interrupt driven hooks: still waiting for xpt_config (xxx seconds) == and then there's nothing. No panic, keyboard still works, I can till scroll through the message, but nothing more. I am using ASUS m3A78-EM Motherboard. '''When i am disabling IEEE 1394 (fire wire)in bios , no problem system boots without any problem'''.''Same problem occurred in PC-BSD 7.2 (In PC BSD 7.2 it also occured while booting from CD for installation) But no problems with PC-BSD 8.0 and PC-BSD 8.1, but again appears in PC BSD8.2(no problem with live DVD)'' . Please do the needful " shinojjose 396 Firewall restart OK window Firewall configuration tool 9.0-BETA1 9.0 System Defect closed 2011-09-30T15:06:49-07:00 2011-10-07T14:09:45-07:00 When I click restart in firewall configuration, I get a window (meaning 'Firewall have restarted successfully', I think) with no text, just 'i' icon and OK button. I've tried only in KDE. vans 370 default pf.conf is incorrect for avahi(bonjour) Firewall configuration tool 8.1 8.2 System Defect closed 2011-03-24T08:00:58-07:00 2011-03-24T18:16:31-07:00 "The default rules for pf.conf in 8.2 and 9.0 are incorrect regarding bonjour. The rules are: pass in on if proto udp from any to (if) port 5353 keep state where (if) is the address of the interface. the firewall is dropping packets to the multicast address. The rules should be: pass in on if proto udp from any to 224.0.0.251/32 port 5353 keep state " BharataK 20 Immediate freeze on intial X screen, before installer Installer 1.4 System Defect closed 2007-09-06T22:21:07-07:00 2007-09-07T18:56:06-07:00 "On nForce4 chipset, AMD64 processor, nVidia 7800GT (DVI cable) 1.4rc1 install disk freezes immediately after X initial checkerboard screen with garbage overwriting visible display. Checksum on CD ok. Boot sequence displays that all hardware has been appropriately discovered (and is labeled correctly by kernel). Cannot loader installer. EVGA 133-K8-NF41-AX MOTHERBOARD http://www.nvnews.net/reviews/evga_nforce4_sli_edition_mainboard/index.shtml " kad77 63 partition overlap Installer 1.4 System Defect closed 2007-10-06T10:09:12-07:00 2008-04-11T10:50:54-07:00 "When i've tried to make a partition with pc-bsd installer i've selected the free space before my ntfs partition. It told me that i have 80 Gb free space there (i thought it's just a bogus information) but after i've installed the system i've realised that it has completely destroyed my 4th partition(i couldn't recover anything at all) because the 3rd primary (freebsd) partition became overlapped with the 4th. " syn001 76 Installer writes outside selected partition Installer 1.4 System Defect kris closed 2007-11-25T18:43:02-08:00 2008-10-20T10:11:59-07:00 "This error appears if, before installing installing PC-BSD, you use a partition manager to arrange a slice for PC-BSD, and this slice does not start at the beginning of the disk, and then you arrange the MBR in such a way that the slice is the first entry in the MBR. In other words, you have a slice /dev/---s1 (in my case /dev/ad1s1) that does not start at the beginning of the disk. When you have this arrangement, the installer (or some part of it) apparently assumes that the slice starts at the beginning of the disk. Judging from the symptoms, it seems to create a partition that starts at the beginning of the disk, and install there, destroying any slice you have there. (The MBR is not altered to reflect this, at least it wasn't in my case.) (I told the installer that I already had a boot manager and it should leave the MBR unaltered.) Some people may find it odd to have the first item in the MBR point to a slice somewhere in the middle of the disk. But it's very useful if you have a boot manager that re-writes the MBR with a separate set of slices for each operating system. I have this arrangement, I have lots of different operating systems (for experimenting) and every one of them has its own set of primary partitions. This has lots of advantages! Thus, to the installer it looks like the space before /dev/ad1s1 is unused, but it contains important data used by other operating systems. There is a simple workaround. The error disappeared when I moved the MBR entry so that it became the second MBR entry, or /dev/ad1s2. In spite of this I think this ticket should have a very high priority, since the bug is extremely destructive. " Kafpauzo 223 Hard disk ad10 not recognized by installer Installer 8.0-BETA System Defect closed 2010-01-22T10:04:54-08:00 2010-01-23T09:15:25-08:00 On a system with hard disks ad4, ad6 and ad10 is ad10 not recognized by the installer, only ad4 and ad6. JoergBraun 278 Fatal error - BLOCKER Installer 8.0 System Defect kris closed 2010-03-14T11:53:14-07:00 2010-06-02T12:40:50-07:00 "In the boot menu, when I press ""3"" to ""Boot in Live Mode"" I get the following and then the system just hangs there. int=00000006 err=00000000 efl=00010082 eip=00000003 eax=00000000 ebx=00476a00 ecx=00000000 edx=00000086 esi=00000000 edi=77c72044 ebp=00000000 esp=00476a00 cs=0008 ds=0010 es=0010 fs=0010 gs=0010 ss=0010 cs:eip=f0 53 ff 00 f0 c3 e2 00-f0 53 ff 00 f0 53 ff 00 f0 54 ff 00 f0 bd ag 00-f0 53 ff 00 f0 a5 fe 00 ss:esp=04 f0 d5 d7 c0 89 04 24-e8 c3 24 33 00 c7 87 20 01 00 00 00 00 00 00 c7-45 a8 00 00 00 00 e9 7d BTX halted This ONLY occurs on my laptop when I boot directly from the CD. If I boot via VirtualBox it boots fine. Also, it works just fine on my Desktop (which is 9 years old by the way). I had been a ditro hopper for a while but I never had experienced such a problme with ANY Linux based OS. " ametedinov 650 PC-BSD 9.0 (x86) installer doesn't propose to install the freebsd boot manager where we want Installer 9.0-RELEASE System Defect kris closed 2012-08-29T19:50:43-07:00 2012-09-04T07:12:22-07:00 "While installing PC-BSD 9.0 x86, I've noticed that it's installer didn't propose me to install the freebsd boot manager where I wanted it to be installed (on the MBR of the second hard disk to be precise). My PC-BSD 9.0 is installed on ""/dev/ad5s2a"", which is for Fedora's GRUB2 the first partition on the freebsd slice which is in fact the second partition of the second hard drive on my PC. So, as PCBSD's boot manager was installed on the first sector of the freebsd slice (2nd partition of the 2nd drive) and NOT on the MBR of this 2nd drive as I wanted, I had to configure Fedora's GRUB2 in order to be able to boot on PC-BSD... The true problem : imagine someone who doesn't have a Linux distro already installed : how can he boot PC-BSD if it's not on the first partition of the drive? He can't! I think that the installer of precedent versions of PC-BSD proposed to install the boot manager on the MBR (maybe I confuse with some Linux distros), but that would be very usefull if it did so." Boug 651 PC-BSD 9.0 (x86) installer doesn't propose to install the freebsd boot manager where we want Installer 9.0-RELEASE System Defect kris closed 2012-08-29T19:52:01-07:00 2012-08-30T05:35:49-07:00 "While installing PC-BSD 9.0 x86, I've noticed that it's installer didn't propose me to install the freebsd boot manager where I wanted it to be installed (on the MBR of the second hard disk to be precise). My PC-BSD 9.0 is installed on ""/dev/ad5s2a"", which is for Fedora's GRUB2 the first partition on the freebsd slice which is itself the second partition of the second hard drive on my PC. So, as PCBSD's boot manager was installed on the first sector of the freebsd slice (2nd partition of the 2nd drive) and NOT on the MBR of this 2nd drive as I wanted, I had to configure Fedora's GRUB2 in order to be able to boot on PC-BSD... The true problem : imagine someone who doesn't have a Linux distro already installed : how can he boot PC-BSD if it's not on the first partition of the drive? He can't! I think that the installer of precedent versions of PC-BSD proposed to install the boot manager on the MBR (maybe I confuse with some Linux distros), but that would be very usefull if it did so." Boug 652 PC-BSD 9.0 (x86) installer doesn't propose to install the freebsd boot manager where we want Installer 9.0-RELEASE System Defect kris closed 2012-08-29T19:53:30-07:00 2012-08-30T05:36:16-07:00 "While installing PC-BSD 9.0 x86, I've noticed that it's installer didn't propose me to install the freebsd boot manager where I wanted it to be installed (on the MBR of the second hard disk to be precise). My PC-BSD 9.0 is installed on ""/dev/ad5s2a"", which is for Fedora's GRUB2 the first partition on the freebsd slice which is itself the second partition of the second hard drive on my PC. So, as PCBSD's boot manager was installed on the first sector of the freebsd slice (2nd partition of the 2nd drive) and NOT on the MBR of this 2nd drive as I wanted, I had to configure Fedora's GRUB2 in order to be able to boot on PC-BSD instead of simply choose this drive for primary boot in the CMOS/BIOS. The true problem : imagine someone who doesn't have a Linux distro already installed : how can he boot PC-BSD if it's not on the first partition of the drive? He can't! I think that the installer of precedent versions of PC-BSD proposed to install the boot manager on the MBR (maybe I confuse with some Linux distros), but that would be very usefull if it did so." Boug 703 endless loop in X setup Installer System Defect kris closed 2013-02-15T05:55:18-08:00 2013-03-08T10:15:39-08:00 "This happened in the VirtualBox only, that I installed from the DVD image. A dialog box saying ""Your previous config failed"" came up over and over again, no matter what I did. I do not know which Version of 9.1 that was, I did not see that bug on the 9.1 live system (which had a blank screen instead..., but I was able to fix that by selecting to re-configure X on the boot screen)" mjollnirpaul 641 PC-BSD 9.0 x86 Installer French and other languages problem Installer 9.0-RELEASE System Enhancement kris closed 2012-08-28T22:14:57-07:00 2012-09-04T07:14:55-07:00 "I've just tried to install PC-BSD on my desktop PC and when I selected French as language, no text at all appeared next to the installer items and choices proposed. No button explanations, nothing but the icons whithout text at all. The big problem with that, is that the PC-BSD installer brings modifications to the hard drive immediately when we configure partitions, and not at the end. So, without buttons illustrations, I didn't really know what I was doing. So, a hard drive full of data was erased accidently! (Hopefully, I have all my data saved on a NAS!) So, I retried install PC-BSD using the English language and that was fine. By curiosity, I selected other languages than French or English, and the problem was the same for several of them (Catalan for exemple)." Boug 654 PC-BSD 9.0 installer doesn't explain anything about FreeBSD slices Installer 9.0-RELEASE System Enhancement kris closed 2012-08-29T20:11:44-07:00 2012-09-04T07:20:55-07:00 "PC-BSD was created to allow non-expert users to easily install and use an alternative system to Linux, Windows or Mac OSX. And as this, it has to explain it's particularities to non-expert people, especially about it's partitioning way. So, it would be nice for new and inexperienced users that the PC-BSD installer explains briefly how PC-BSD is partitioned : it might briefly explain the FreeBSD slices and that the root partition is in fact a part of a slice which itself has to be a primary partition created from an ext2-3-4, FAT, NTFS or any other file system for the system to be installed! Imagine you are a pure FreeBSD newbie : how would you know that? The most of the new PC-BSD users come from the Linux world, and even me, who was a very experienced Linux user, I was lost with the slices partitioning system with no explaination at the beginning." Boug 149 Install continous reboot cycle - screen saver display blanking bug? Installer 8.0-ALPHA 8.0 System Defect kris closed 2008-10-17T02:08:07-07:00 2009-12-22T06:26:08-08:00 "The install continuously reboots in a cycle when left unattended, possibly due to no console (keyboard/mouse) activity timing out. I had never ending reboots unless I sat at the computer and kept the mouse moving periodically. Thus, an activity idle timeout seems to cause reboot repeatedly during installation. Not sure, but it may only occur during the file installation step. Possible solution: disable blanking/screen saver like operations during install phase." anonymous 331 Installation failed Installer 8.1-RC1 8.1 System Defect kris closed 2010-07-16T15:14:00-07:00 2012-01-26T11:48:13-08:00 Install failed while trying to install FreeBSD from the PC-BSD installation GUI. File pc-sysinstall.log is attached to this ticket. joehache 21 Installer cannot write any files to disk, can partition however Installer 1.4 System Defect tim closed 2007-09-06T22:34:09-07:00 2007-10-01T07:26:31-07:00 "http://reviews.cnet.com/motherboards/asus-a8v-vm-motherboard/4507-3049_7-32071665.html?tag=sub On Asus A8V-VM motherboard, PC-BSD 1.4rc1 install CD will boot to X, run installer and let initial setup steps commence. It will partition the blank 15gb IDE HD, however, during the entire install progress bar each file name is followed by: ""cannot write (whatever) no space on disk"". After a few thousand of these, the installer halts with ""An error occurred while extracting system image! System will reboot"" etc. After reboot, the partition table was written but HD is otherwise blank. The installer needs better error handling, it kept plodding through this same critical error from 0% to 100%. Also, if PC-BSD installer can write a partition table that is visible after reboot, why can't the installer manage to write a single file from CD to HD?? The CD drive and HD look to be PIO mode 4 from kernel messages, so something in this chipset may not be 100% supported. " kad77 219 Installation error with PCBSD8 Beta Installer System Defect closed 2010-01-15T02:24:23-08:00 2010-01-16T11:33:31-08:00 "I've tried to install PCBSD 8 Beta on two diffrent machines now. The first was an Aspire 5000 and the second was a virtualbox-machine on a hp compaq 6715b. I've tried using diffrent medias for the install such as: boot-cd 64bit and boot-cd x86 In all cases i've gotten an error when the installation starts. I can make all the settings in the installer and when i press ""Start installation"" it starts and then crashes. I've emailed the error-repport from the last crash to me and will attach it here as a pdf-file." dvwallin 252 Install Bugs still chronic, x86 and x64 comparisons and various Suggestions. Installer 8.0-RC System Defect closed 2010-02-15T17:52:59-08:00 2010-02-17T09:03:14-08:00 "'''PCBSD-8, RC-2 BUG-REPORT (INTELx86 & AMDx64)''' == '''' == '''1) INTRODUCTION''' In my last bug report (#230) for Beta/RC-1 releases, I described similar problems to those that I mention below. However those bugs applied to the Beta/RC-1 AMD-x64 install. x86 wouldn't install at all within Beta/RC-1, at that time. Chris has came to the rescue and has made good progress with the installer, but there is a lot more to do. Now AMD-x64 variant installs from the full DVD, with some work and x86 installs only off the boot CD with major work. At RC-2. neither install processes are yet easy enough for newbies !!!! (see descriptions of the numerous issues below). The two machines I have used for the Install and Usage tests are : A) Intel x86 32 bit, Single-Core = HP pavilion a410n, 2.8 GHz Celeron CPU, with latest BIOS (2005), no Video Card. This machine really tests things out, for some reason. B) AMD x64 64 bit = HP Pavilion a6130n - AMD 64 X2 DUAL CORE 5000+, with latest BIOS (2007?) and integrated graphics. * Both of these machines are used every day, for varying tasks. I installed FREEBSD 8 on my x86 machine to compare usability and I found that FREEBSD-8 simply goes into the x86 machine without problem and is fast. I conclude that there are major things about the x86-PCBSD-8 Install process and Desktop system which are CURRENTLY degraded or that are made too complicated. Separately, the same x86 machine runs fast and reliably on : ~ Linux Mint 8, Fluxbox (a lightweight Desktop). ~ Fedora 12 (to offer useful, technical comparison). (However when I upgrade either of these Linuxes, major problems always arise and so I am sold on PCBSD. When PCBSD runs great it keeps running great and upgrades RELIABLY - very cool). PCBSD-8 RC-2 IS ABSOLUTELY FANTASTIC on my AMD x64 machine !!!!!! It's so fantastic on this PC that it has become the system of choice for me. * * '''2) INSTALLING/USING PCBSD-8 RC-2, on the Intel x86-32bit machine. ''' Very Problematic, not really achievable. * 2.1) Installation Bugs - These are still ""Massive"", in scope. 2.1.1) Full DVD = non operational. - The Full DVD install does not work and does not get through to the graphical screens. It just gets slow and stops early in the process. The CD boot-only install does eventually work, but only after a lot of sweat and frustration. This is however a major improvement over Beta & RC-1 ! There I couldn't get x86 to Install AT ALL. 2.1.2) Inadequate testing must exist in x86 32 bit variant. - With the ""full DVD"" install I won't even begin to explain what happens BUGWISE, but its huge. I cannot believe that the dev/test teams don't see these massive departures from success. I suggest that your dev/test teams get some older PC's and actually try the installs on about 6 very different machines from the2000, 2004, 2008 era's, using both AMD and Intel. Also try the same install test with Video Cards and without, on these same machines. 2.1.3) Video Resolution show stopper The installer needs to start with Vid Res set at VESA resolutions (50 Hertz, 800 x 600 or 1024 x 768 etc), so that ANY monitor can work all the way through the install process. In both the 32 and 64 bit install, I got ""mode not supported"" errors from several LCD monitors. This halts the install because it cannot be seen, anymore > > > - - - - - - - - ? ? ? ? ? I had to get my old CRT monitor out of the shed to see the process enough to understand what to do to get going again. The installer process needs to be able to : a) Offer full, easily controllable, manual intervention of Vid Res (and all install factors, see 2.1.4, below). b) Hold the settings all the way through to when the Vid Res choices are again changeable after install. There the settings are reversible by pushing the Esc key. (If I can no longer see the screen after changing settings, I simply push Esc and the prior resolution setup returns. No Halt of Install) !! The changes discussed next,in 2.1.4, would handle this issue as one subsection of several. (More powerful setup options must be made easily available to the Installer User). 2.1.4) Making the Pre-graphical installer Main-Menu USER-FRIENDLY. The pre-graphical installer section has a menu that comes up. Most of my current frustration is that this menu is difficult to use and is different between the x86 and the x64 installers. It is problematic because it : a) Has no Help system to describe what the functions do or mean and about how to use the buttons. This needs to be improved. b) Does not wait for instructions - it just times out and does whatever it wants to do after 10 seconds. I don't want to have to wait around to try to ""catch"" it before it moves on. Nor do I want to be forced to attempt to understand and Edit the settings in only the few seconds that I have before it races forward. Suggestion is that it is reprogrammed to proceed ONLY after a ""OK to Proceed"" question is answered ""Yes"" and then Enter is pushed. If Esc is pushed instead, then it would revert to the setup Menu. Better still, a summary of what will happen is displayed after Enter is pushed and then we are asked to agree to the summarized settings before proceeding. And we have another chance to Edit the settings before actually proceeding with the expensive install process. An install cycle is expensive because it consumes so much time, particularly when it has to be repeated over and over due to a chaotic install arrangement.Currently we have to learn about each install option by doing a full install to see what happens (which is too crazy). 2.1.5) Making the Pre-graphical installer Main-Menu EFFECTIVE. Another issue is that it is not obvious how many of the Menu options at the install control menu (pre-graphical) can be switched on together and if these settings are interactive. For example I may want ACPI off and VESA mode selected at the same time. So this menu must allow many settings to be set. Any interactions between these settings must be considered during its programming. These settings must apply throughout the install process. Any command line instructions could be entered within this all-important menu. Any later install ""Halts"" could make recommendations which are entered here on the next pass. This would be a more efficient use of my time. The resulting settings should be able to be saved somehow so they won't get lost for that machine etc etc. That's probably a tricky one ! Emailing them out to the installing person (as currently happens with errors arising during the graphical part of the install) or to their BSD tracbug account are two possible options . Or something equally clever (save settings onto a USB stick ?) 2.1.6) Automatic ACPI disconnection is desirable after an Error Chris and I emailed about potentially having self-selecting ACPI modes, in future installer versions. This is still needed. (The Linux Mint 8 installer must have this ability, already). On the x86 machine, ACPI had to be switched off before install. During the AMD x-64 install it was OK to leave it in default setting, which is ACPI on. 2.1.7) NO INSTALL INSTRUCTIONS APPEARING PLEASE, WITHOUT A WAY TO USE THEM BEING GIVEN. When ACPI was left on in the x86 CD-Boot-only install, a list of suggestions came up when install halted. No instructions were give on how to USE these instructions. They were also written confusingly and were of no use to a medium level tekkie, like me. A HELP FILE WOULD BE NEEDED FOR SUCH DETAILS TO BE USED, FOR EXAMPLE. * 2.2) Operational Bugs - x86 32 bit variant - Needs work ! See section 5 below for more discussion about this. The Desktop in x86 32 bit seems to get slower and slower as I use it. The CPU gets more and more busy, according to ""System Monitor"", in idle mode, with windows open. In similar circumstances, this is not the case with the x64 install on the x64 AMD machine. Its ""System Monitor"" shows little CPU activity when idle, as would be expected. This needs difference needs to be investigated ! In the x86, it seems to mean a continual usage of the CPU for open windows - this could be the older integrated Video system needing constant work. (I will try installing a PCI video card in there). The x86 install also seems to be a little unstable too, losing text during Edits etc etc ? ? ? * * '''3) INSTALLING/USING PCBSD-8 RC-2, on the AMD X64-64bit machine.''' I only tried the full DVD install as it did work. I assume the CD-boot only install will also work for AMD x64. Chris's recent improvements have made the whole install go better, for sure Here, it was only the Video resolution that was troublesome, made worse by the hard-to-control install menu. This situation is described in the 32-bit install summary above and applies to both 32 and 64 bit variants. Suggested solutions are given there. * * '''4) RECENT INSTALL IMPROVEMENTS HAVE HELPED MAJORLY (since Bug Report #230 and various others)''' a) If and when the install process gets through to the graphical part, the selection-menu to choose ""Internet"" install actually works now. (The ""Internet"" option radio button is no longer greyed out). b) Bugs are no longer occurring or being reported, under the graphical section. Thats fixed ! - Cool !! * * ''' 5) NON-CRITICAL ISSUES FOUND, FOR DISCUSSION''' 5.1) KTORRENT INSTALL - this is the same issue on both x86 and x64. KTORRENT and many other programs do not appear in the ""INSTALLED SOFTWARE"" manager screens, after download. It is as if these are a treated as minor programs OR are lost. When I went to install KTORRENT, I didn't check if it was already in the machine - it may have been. The software manager didn't tell me that it was, so I assumed that it wasn't. The first moment I knew it was weird was when I downloaded the KTORRENT PBI in the software manager. AFTER it came down, it then disappeared from the software manager screen. I later found it under ""Internet Apps"" but it itself does not reside in the Software Manager ""INSTALLED SOFTWARE"" screen. I just downloaded ABIWORD on the x86 machine and it disappeared after down loading, too. Couldn't find it anywhere - - - * 5.2) MANAGING UPDATES OF SOFTWARE - comparison bewteen and handling of ""MAJOR"" & ""MINOR"" packages. From 5.1), a De-markation should be made obvious between ""background"" software and ""full-time"" or ""major"" software, in the software manager system. Personally I believe that all software should be in the software manager, maybe under separate headings - Major and Minor, or something similar. Does the minor software get updated under System Updates, or not at all ? This is another important question for the future - - - * 5.3) DESKTOP NERVOUSNESS Great improvements have been made since Beta/RC-1. The crazy mouse wheel issue has been fixed and now works great, for example. Now in x86 32Bit : - The desktop is slow and clunky. For comparisons sake, Linux Mint-8 ""Fluxbox"" is very fast and smooth, on the same machine. This area needs work ! This was how PC BSD 7 / 7.1 were before 7.1.1 came out - - - Now in both x86 and x64-AMD : - Mouse entered ""scroll bar"" scroll commands stack up entries and WON""T STOP SCROLLING when the left mouse button is released. This needs to be stabilized. Once I release the left mouse I want the screen to stop scrolling !! * 5.4) KTURTLE :) Thanks for getting KTurtle back into RC-2 under ""Education Apps"". This is such a cool program for kids and is useful for some day-to-day tasks, as its simple. And I can send it to other PCBSD users so that they can use the App. Useful - - - ! * * '''6) ANNOYING or UNEXPLAINED APPS ISSUES - X86 & X64.''' * 6.1) The PBI builder app could be better explained in its extraction and use. For example, there is no obvious ""Run"" button. Maybe it works differently. A basic ""how-to-use"" tutorial would be useful, for this important App. * 6.2) The BPM App. (Version 0.4.1b_16) looks very empty when downloaded ! Does it work ? What does it do ? (BPM means ""BSD Ports Manipulator""). * 6.3 In Firefox 3.5.7, the whole machine is often halted when awaiting on the likes of YAHOO adverts, which are large, often animated, graphic files. I have fixed this a little by installing the Firefox ""Add-On"" which ignores such things. Can we maybe have it so that the machine will be free to do other things while waiting for Firefox to finish getting downloaded files from Yahoo ? This should be easier on a dual-core machine but actually the AMD machine used is a dual core and suffers from this problem just like the x86 32 bit single core does. So a puzzle right there – ""compositing off"" makes no difference, by the way. * 6.4) Often the Menu Boxes that I open cannot be read as the boxes are too small for the text to be shown, particularly when showing directory structures. K3B has this bug in its menu windows, as does ARK. Maybe this is a bug in the underlying Windowing system that affects all Apps. * * '''7) WISHLIST''' More Apps ported from FreeBSD. Particularly with the ability to : a) Input webcam images in realtime and hopefully connecting through to the video editor Apps. This seems to be available in FreeBSD, which uses ""Video4Linux"" software (which is available on FREEBSD) to achieve this. b) Also get Skype working with any webcam, directly in PCBSD. * * '''8) CONCLUSION''' There are massive departures from the ideal with x86 install. - With the ""full DVD"" install I won't even begin to explain what happens here. I cannot believe that the dev teams don't see these massive departures from success before releasing stuff. I suggest that as part of the dev process, the dev/test teams get some older PC's and actually develop the installs on say 10 very different machines from the 2000, 2004, 2008 era's, AMD and Intel, with Video Cards and without. If the install is easy go find another machine until difficulties arise !!! The same dev and test teams should also install Fedora 12 and Linux Mint * Fluxbox on these same machines for the experience and comparison. It took me 3 years to get PCBSD (versions 1 – 7) to work on a PC due to these kinds of issues. Things have improved but I don't want to have to keep spending half a day to install every PCBSD-8 RC !! Anyone should be able to install it in an hour with some work, perception and understanding. The install system needs to accommodate any combination of errors and system components. Manual intervention is AOK while the installer is evolving. At the moment little intervention is possible and is also made difficult bu a non-haltable selection table - see notes above. The fact is that the Linux Mint 8 installer is flawless, fast, all knowing, automatic and easy on the same machine that stopped the PCBSD-8 install in its tracks. The Linux Mint 8 installer consumed 1/2 an hour of my time whereas the PCBSD-8 x86 installer consumed 1/2 a day and only finally happened because of my previous experience with the PCBSD install scenario. PCBSD-8 RC-2 IS ABSOLUTELY FANTASTIC on my x64 machine !!!!!! (HP Pavilion a6130n - AMD 64 X2 DUAL CORE 5000+). PCBSD-8 is so fantastic on the x64 AMD that it is the system of choice for me. That's why I am spending the time to write this - PCBSD-8 is a fabulous concept and I want to contribute to it getting more widely used and even better, as time goes by. * * *" GeeKen 385 Upgrading fails in all versions total freeze upon upgrading the linux emulation Installer System Defect kris closed 2011-09-09T11:28:28-07:00 2011-09-12T09:01:29-07:00 "I have tried to upgrade from several versions (8.0, 8.1, 8.2) and resources (cd, dvd and usb) none of them seem to work on my machine. I have a hp pavilion dv6000 notebook, not sure of it is related to this type of notebook but each time when I attempt to upgrade the system totalty freezes when it reaches the linux emul files. At first it seems fine it starts to remove some files and begins the upgrade but as soon as it reaches those it is over and done. I've tried to manipulate some stuff with acpi without acpi (obviously) and a whole bunch of other stuff but it keeps refusing... " patser 600 Unable to install 9.0 Installer 9.0-RELEASE System Defect kris closed 2012-04-02T08:33:52-07:00 2012-09-04T07:33:15-07:00 "Hello I am unable to install the 9.0 release. It appears that it's not detecting or rejecting the USB keyboard and USB mouse, as well as complaining that the install image is not found and cannot be mounted. I have ruled out a bad install image. I tried with the 64 bit DVD Full and the 64 bit Live images. I also downloaded them from different mirror sites using two different computers. DVD images were also burned using two different PC's. I then went and downloaded the 64 bit USBFULL and 64 bit USB Live images and created two bootable USB flash drives. In every case, either with the DVD or USB images, the boot starts off fine, goes about the business of detecting devices, but once it gets to the USB ports, it seems to go bonkers after detecting them. I managed to capture what is happening on the console. I tried the Normal, AHCI, Verbose and boot to console - all fail the exact same way. Here is what is happening, this starts just before the errors appear:: {{{ usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 uhub0: 8 ports with 8 removable, self powered uhub1: 8 ports with 8 removable, self powered usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) ugen0.2: at usbus0 (disconnected) uhub_reattach_port: could not allocate new device usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT ugen1.2: at usbus0 (disconnected) uhub_reattach_port: could not allocate new device Trying to mount root from ufs:/dev/ufs/ROOTFS []... start_init: trying /sbin/init Sleeping 10 seconds to let devices settle ls: /dev/da*: No such file or directory Checking for install image on: /dev/cd0 Unable to mount: /dev/cd0 Checking for install image on: /dev/cd1 Unable to mount: /dev/cd1 Checking for install image on: /dev/cd2 Unable to mount: /dev/cd2 Checking for install image on: /dev/cd3 Unable to mount: /dev/cd3 Checking for install image on: /dev/acd0 Unable to mount: /dev/acd0 Checking for install image on: /dev/acd1 Unable to mount: /dev/acd1 Checking for install image on: /dev/acd2 Unable to mount: /dev/acd2 Checking for install image on: /dev/acd3 Unable to mount: /dev/acd3 Error mounting install image!!! Please report this problem to PC-BSD support! ls: *cd*: No such file or directory ls: da*: No such file or directory Available devices are : Press ENTER to drop to shell. When finished, type in 'exit' to reboot. }}} ==== At this point all I can do is power off or reboot, as the keyboard is useless. I have tried several wired and wireless keyboards, tried every USB port and the results are always the same as above. I even tried disabling the on-board USB and tried using a generic (Rosewill) powered USB 2.0 PCIE 1x card, and that was not even detected at all. It does appear that the installer is actually disabling the keyboard and mouse - one of my keyboards is backlit and when the error messages pop up the keyboard will go dark. Also as a FYI, I tried using the PC-BSD 8.2 64 Bit DVD on the same computer, the install worked perfectly, no errors at all from start to finish. This is the system I am trying to install on that it seems like 9.0 doesn't like: Motherboard: MSI P6N SLI Platinum MS-7350 Ver 1.0\\ NVIDIA nForce 650i SLI (C55) Chipset\\ NVIDIA nForce 430i (MCP51) Chipset\\ Realtek ALC888 HD Audio\\ Realtek RTL8211BL 10/100/1000 Ethernet\\ VIA VT 6308P Firewire\\ CPU: Intel Q6770 Core2 Quad 2.66GHz Memory: (4x) Generic 2GB DDR-II 800MHz, 8GB Total Video Card: PNY Technologies NVIDIA 8600GT, 512 MB GDDR3 Factory Overclocked HDD: Samsung 80GB SATA HD080HJP\\ Seagate 160GB Barracuda 7200.7 SATA ST3160828AS\\ Western Digital 160GB Caviar SATA 1600AAJS\\ CD/DVD: Memorex 5395 16X DVD-R/RW CD-R/RW EIDE Keyboard: Saitek Eclipse USB\\ Mouse: Microsoft Wireless Laser Mouse 6000\\ Any other info you need please let me know. ~Keith " stinkfoot 17 Error with install modifying hard disk. Installer 1.4 1.5 System Defect tim closed 2007-09-04T08:12:27-07:00 2007-10-26T08:46:42-07:00 "This was a bug with ""tar"" returning a non-0 exit status when using a lot of partitions apart from the default. I've fixed this in SVN now, and it'll be fixed in the 1.4.1 update here shortly. We've also switched to LZMA compression, which will improve the extraction speed as well :)" toomany 162 Upgrade from Fibonacci to Galileo fails with ZFS Installer 7-BETA1 7.1 System Defect closed 2009-04-14T14:36:49-07:00 2009-08-04T01:39:22-07:00 "The installer from 7.1 fails to recognize the existing ZFS pool that was created by PCBSD 7.0. So it is not possible to upgrade from 7.0 to 7.2 when you installed 7.0 with ZFS support. " lme 176 Interrupt of upgrade, corrupt old version Installer 8.0-BETA 8.0 System Defect closed 2009-09-01T13:25:35-07:00 2010-01-16T11:45:18-08:00 "1. Have some version of PC-BSD 2. Start upgrading 3. Stop upgrading (intentionally, or due to some reason) 4. Reboot, choose upgrading 5. See fail - the old PC-BSD installation not detected, and there is no way to continue installation." yerenkow 198 Swap encrypted not always installs as encrypted Installer 8.0-ALPHA 8.0 System Defect kris closed 2009-12-22T06:31:40-08:00 2009-12-28T13:12:30-08:00 "I made such layout: / - ufs swap.eli /home - ufs+s.eli /zfs - zfs.eli in install logs I see clearly that during install installer using ad4s1b as swap, and after that trying to use ad4s1b.eli as swap. Maybe it's normal, but after install swap is not encrypted in installed system. " yerenkow 398 Instalação em Português do Brasil Installer 8.1 8.0 System Defect kris closed 2011-10-02T16:01:05-07:00 2011-12-23T11:56:43-08:00 "É impossível instalar o sistema quando selecionada a linguagem Português do Brasil, pois as imagens e textos em icones não são exibidos. Este problema ocorre tanto na versão 8.0 quanto na 9.0. " Fabio Souza 15 Special characters in root password do not work Installer 1.4-DEV / 1.4-BETA System Defect closed 2007-09-01T23:48:02-07:00 2007-09-03T10:04:50-07:00 "At least one or some special characters in the root password field in the installer do not work. I replicated this twice by using a root password containing a ""$"". I'm not sure what it actually sets the password to, but it's not what I entered. Using a password without $ works as expected. 1.4-RC" cmb 61 Indonesian Language Installer 1.4 System Defect closed 2007-10-04T04:24:21-07:00 2008-04-11T10:37:48-07:00 "There is no indonesian language at Installation of PC-BSD, 1st CD and 2nd CD. " putu 77 Wrong keyboard layout during installation Installer 1.4 System Defect closed 2007-11-25T19:14:12-08:00 2008-05-22T08:43:19-07:00 "Even if you have selected a national keyboard layout at the start of the installation, later, on the installation page where you enter passwords and other data, the US keyboard layout is used. After installation you have to log in with your national keyboard layout. This can make login impossible for users who don't understand what happens or don't know the US layout by heart. " Kafpauzo 84 Install failure Installer 1.4 System Defect closed 2007-12-21T07:12:11-08:00 2008-04-11T10:40:18-07:00 When Installing form cd on a SATA drive install fails. It can not find needed installation files. If installed from an IDE cdrom Install works normally. Failure occures before the switch to the graphical interface. FreeBSD give simular error in that to install from the cd if it was booted on the Sata CD drive the cd has to be moved to the IDE CD drive for sysinstall to find the files. grant 186 Custom Partition Leads to Fail Installer 7.1.1 System Defect closed 2009-11-09T14:36:58-08:00 2009-12-21T14:24:01-08:00 "Pretty easy to replicate with this one. I'm using 7.1.1-x86, and a dual core PC with a 500G drive and a DVD. Using the DVD install, I select ""whole drive"" and ""custom partition"". I note that it selects all but 500meg as the space for / and 500 meg for swap. I decrease the / by 4 gig and increase the swap to fill that space. Then I start the install. I don't know how big it makes /, but the install fails for lack of space on / (I can see this on the console screen if I flip to it)." zBeeble 222 Partition manager can't make a partition Installer 8.0-BETA System Defect kris closed 2010-01-22T00:05:37-08:00 2010-07-08T08:23:45-07:00 "Currently, partition manager can select a partition and will create slices in it. Or can select whole disk, then it creates first partition for whole disk, no matter that slices could fit only a part of disk. So, there is no way currently to leave some space unpartitioned, for other OS for example. Installer creates single partition for whole disk, and leave free space only for slices in this partition. This behavior required some more love." yerenkow 228 no response to keyboard at boot prompt Installer 8.0-BETA System Defect closed 2010-01-28T10:54:42-08:00 2010-07-07T07:59:12-07:00 There is no response to my keyboard at the boot prompt for the 8.0 RC DVD, which eventually times out and launches the installer. Keyboard is a logitech elite keyboard plugged into usb, which is detected by my bios. reub2000 267 creating encrypted root partition halts installer Installer 8.0 System Defect closed 2010-02-23T07:23:50-08:00 2010-07-07T08:00:05-07:00 "When / partition is set to be encrypted, the installer gives an error about it just after starting installation. I think all these sure-to-be-errors should be checked and warned about before starting installation (so that they could be fixed), not let users to find them out the hard way. Even better, these invalid setups should not be possible to make." atrox 268 root partition with ZFS leads to installation failure Installer 8.0 System Defect kris closed 2010-02-23T07:26:18-08:00 2010-07-07T08:30:07-07:00 "I'm trying to install FreeBSD from PC-BSD 8.0. I created ZFS-partitions manually: / /var /tmp /usr SWAP Installation was on 99% when it reported that error occurred and that installation is halted. Errors were smth about not being able to umount /mnt etc. When I tried installation the same except / partition was left UFS+S, installation was OK. I tried to get more specific errors too, but I didn't know how to mount ZFS partitions etc. Sorry :)" atrox 269 installation makes live system to restart Installer 8.0 System Defect kris closed 2010-02-23T07:29:52-08:00 2010-07-07T12:48:40-07:00 "I wanted to get installation log out of the failed system installation (so that I could get it from the newly created partitions that were left mounted after installation), but I couldn't. On 99% of the installation process just halted and then system restarted, the way RESET occurs. One other time when installation was successful, I was asked whether to restart or not, but I couldn't answer it, because system fell into such hard restart again." atrox 277 PC-BSD 8.0. Installer recognised ad6 instead ad0 Installer 8.0 System Defect kris closed 2010-03-03T09:17:50-08:00 2010-07-07T12:45:55-07:00 "I have my hard-disk divided into two parts, second part (sda2 in linux terminology) has linux installed, with Grub2 in MBR. I prepared primary partition sda1 for PC-BSD 8.0. I began to install. Installer offered ad6*, I really don't know why. I decided to continue with installation. I choose not to install PC-BSD's bootloader, I was not afraid because I was sure that with linux-Grub it will be easy; for years I used to chainloading BSD and it always worked. Now I cannot boot into PC-BSD. Don't know how to configure Grub2 to show me PC-BSD in its menu. Linux tells me that sda1 is ""unknown"" with ufs filesystem. PC-BSD's live CD showed me slices in fstab on strange places - all was in /dev/label/something (excuse me, I forgot how it was exactly). I made maybe foolish try: From live CD I manually edited PC-BSD's fstab - deleted all those /dev/label/* and wrote /dev/ad0s1* instead for each root, swap, usr etc., then returned into linux, made update-grub, but it didn't help. Now I have ""some"" ufs which I cannot boot into." vojacik 291 No /boot/loader error Installer 8.0 System Defect kris closed 2010-04-13T11:18:06-07:00 2010-08-20T08:38:00-07:00 "I've tried to install from PCBSD8.0-x64-DVD.iso numerous times and I'm getting No /boot/loader on the reboot. I did a cat /dev/acd0c > xx.iso , then a head -c 3516813312 xx.iso > yy.iso to get rid of the extra bytes at the end of the image and the md5 sums are the same, so it's not the DVD. I also installed it on another machine at home, which runs flawlessly. I read through the forum and tried messing with BIOS options as suggested here: http://forums.pcbsd.org/viewtopic.php?f=2&t=15273 I didn't have the Ultra DMA stuff, but changed AHCI -> ATA, then ATA -> Legacy to no avail. The box is an OPTIPLEX 755 real memory = 3487559680 (3325 MB) CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2394.00-MHz 686-class CPU) ad0: 238418MB at ata4-master SATA300 and runs PCBSD 7.1.1 just fine. I noticed a bunch of ""Seek failed"" (105169 of them) and ""Write failed"" (383 of them) errors on the install and I have attached the .tar-extract.log file." mjanosi 296 DHCP is not used for the installation if Japanese was selected as the language Installer 8.0 System Defect kris closed 2010-05-12T08:16:12-07:00 2010-05-12T08:49:02-07:00 "(1) Boot PC-BSD 8.0 installation CD (boot-only) (2) Select ""Japanese"" as the language (3) In configuration of the network interface, choose ""DHCPで自動選択"". It is a translation of the ""AUTO-DHCP"". (4) click Next ...but the network interface is not configured with DHCP. " kzmi 305 Partition problems Installer 8.0-BETA System Defect kris closed 2010-06-04T03:58:15-07:00 2010-07-08T06:45:20-07:00 "Hi. I installed 2 times PC BSD 8.0 on the same seagate hard disk 1TB. I specified a length for 100MB for a primary partition to install PC-BSD. Each time the installation didn't take account of this limit but reserved the whole rest of the disk for PC BSD. So in this case 700 MB (i have a 300MB Windows installation at the beginning of the disc). This happened twice, and i'm sure i did nothing wrong. There is no utility around to shrink a BSD partition, so this is very bad! " mzimmi 309 Internet Update 8.0 to 8.1-BETA1 fails Installer 8.1-BETA1 System Defect kris closed 2010-06-11T05:22:41-07:00 2010-06-14T07:32:37-07:00 "System crashes and reboots while updating during package deletion phase. PC-BSD installed on /dev/ad1s2 Using bootonly CD and Internet as installation source" bitraptor 338 System Upgrade fails during uninstall phase Installer 8.1 System Defect kris closed 2010-08-04T06:43:07-07:00 2011-02-22T07:11:56-08:00 "System: AMD64 / 2GB RAM / Sun Workstation Fault during upgrading from DVD-Full-Install release During the first step, the system removes packages. The system in question hangs when the linux-package is tried to be removed, so that only a reboot will solve the issue. As an upgrade is not possible, a full installation is required. This behavior could be monitored since release 7.1. Unfortunately no logs could be safed." gschultz 339 Internet installation from bootonly CD not working Installer 8.1 System Defect kris closed 2010-08-05T09:01:59-07:00 2012-01-26T12:15:04-08:00 "After entering IP address, netmask, nameserver and gateway in Sysinstaller, a dialog box appears where installation from internet is greyed out. A check within xterm reveals that neither the IP address is assigned to the interface nor the default route is set (only nameserver in /etc/resolv.conf is ok). After fixing this manually the internet option can be selected, an URL is displayed and setup can be continued up to the point where download should begin. Then Sysinstaller exits with an error message, probably again due to problems with the network setup. This time I don't have an idea how to proceed. Installation was attempted in a Virtualbox guest. An older PC-BSD version is already running fine there." njurkeit 344 8.1 installer gets confused when asked for two separate ZFS pools Installer 8.1 System Defect kris closed 2010-08-13T21:45:35-07:00 2012-07-26T10:39:11-07:00 "Installing PCBSD 8.1 from x64 DVD. Used the GUI to set up the following custom partitioning on ad1s1: - 1024MB UFS /boot[[BR]] - 8192MB SWAP encrypted[[BR]] - 8000MB ZFS not encrypted (/, /usr, and /var explicitly listed as mountpoints)[[BR]] - TheRest ZFS encrypted (/home explicitly listed as mountpoint)[[BR]] The GUI then creates the following related lines in sys-install.cfg: disk0-part=UFS 1024 /boot[[BR]] disk0-part=SWAP.eli 8192 none[[BR]] disk0-part=ZFS 80000 /,/usr,/var[[BR]] disk0-part=ZFS.eli 149251 /home[[BR]] encpass=xxxxx[[BR]] commitDiskLabel Installer correctly creates tank0/, tank0/usr, tank0/var and tank1/home, then proceeds through ""pc-sysinstall: Starting Extraction"" and ""pc-sysinstall: Extraction Finished"" steps. However, during final tidying up and resetting of ZFS mountpoints, the installer gets confused and thinks there is also a tank1/var in addition to tank0/var. Thus, installation barfs at: [...] Running: zfs set mountpoint=/home tank1/home[[BR]] Running: zfs unmount tank1/home[[BR]] Running: zfs set mountpoint=/var tank1/var[[BR]] cannot open 'tank1/var': dataset does not exist[[BR]] Error 1: zfs set mountpoint=/var tank1/var[[BR]] [...] Oops :) No idea why 'tank1/var' was mysteriously presumed to exist, but the nett impact is to cause the installation process to fail when given a not-unreasonable partition configuration :( Hope this feedback is of some help. cheer, gja " gja 345 Cannot create /tmp as mountpoint inside ZFS pool during 8.1 installation Installer 8.1 System Defect kris closed 2010-08-13T23:27:23-07:00 2012-07-26T10:41:31-07:00 "Installing PCBSD 8.1 from x64 DVD. Used the GUI to set up the following custom partitioning on ad1s1: - UFS 1G for /boot[[BR]] - SWAP of 8G[[BR]] - 'basic' ZFS of the rest for /home, /var, /tmp, /, /usr and /Programs[[BR]] (arguably a not-unreasonable configuration so one can later set separate ZFS quotas on each mountpoint's file system) Installer correctly creates tank0/, tank0/usr, tank0/home, etc, and then proceeds through ""pc-sysinstall: Starting Extraction"" and ""pc-sysinstall: Extraction Finished"" steps. However, during final tidying up and resetting of ZFS mountpoints, installation fails with ""encountered an error and has been halted, do you want to generate an error report?"" with only ""Yes/No"" as options (i.e. missing the ""Show details..."" option I expected to see). I said ""Yes"", but no error log was created. Instead, the GUI installer simply asked if I wanted to reboot now. Short version: It appears that when the installer back-end attempted ""zfs set mountpoint=/tmp tank0/tmp"" (while tidying up the zfs mountpoints) it mounted over the top of the active /tmp, which then caused the installer to loose its little brain ;) Things go bad. Long version: Rather than reboot, I switched back to 2nd console (ctl-alt-F1, then alt-F2) logged in as root and was able to extract the following ""zfs list"" output: {{{ NAME USED AVAIL REFER MOUNTPOINT tank0 5.68G 62.2G 230M /mnt tank0/Programs 18K 62.2G 18K /mnt/Programs tank0/home 4.28M 62.2G 4.28M /mnt/home tank0/tmp 25.5K 62.2G 25.5K /tmp tank0/usr 5.41G 62.2G 5.41G /usr tank0/var 42.6M 62.2G 42.6M /var }}} This suggests to me (although I'm not expert) that the installer barfed in the middle of resetting zfs mountpoints away from /mnt and onto their ""correct"" locations, and that /tmp was the last one appropriately reset. Output from ""df -h"" supports the hypothesis: {{{ Filesystem Size Used Avail Capacity Mounted on /dev/ufs/ROOTFS 26M 18M 6.0M 75% / devfs 1.0K 1.0K 0B 100% /dev /dev/md6 7.5M 78K 6.8M 1% /tmp /dev/md2 118M 114M -6.0M 106% /uzip /dev/md7.uzip 998M 291M 628M 32% /usr /root/SysInstaller 26M 18M 6.0M 75% /usr/PCBSD/SysInstaller /root/pc-sysinstall 26M 18M 6.0M 75% /usr/PCBSD/pc-sysinstall tank0 62G 230M 62G 0% /mnt tank0/Programs 62G 18K 62G 0% /mnt/Programs tank0/home 62G 4.3M 62G 0% /mnt/home /dev/acd0 3.3G 3.3G 0B 100% /cdmnt-install /dev/ad0s2a 989M 152M 758M 17% /mnt/boot-mount tank0/tmp 62G 27K 62G 0% /tmp }}} Notice that tank0/tmp and tmpfs are both mounted on /tmp. Ultimately, the backend installer should figure out a safe way for the user to nominate /tmp as a valid ZFS mountpoint (which would be my preference), or the GUI frontend should check for anyone attempting this configuration and warn them it wont work (before the long extracting process is underway). Hope this feedback is of some help. cheers,[[BR]] gja " gja 346 Cannot create /usr and /usr/ports as ZFS mountpoints during installation Installer 8.1 System Defect kris closed 2010-08-13T23:43:44-07:00 2012-07-09T10:21:20-07:00 "Installing PCBSD 8.1 from x64 DVD. Used the GUI to set up the following custom partitioning on ad0s1: - UFS 1G for /boot[[BR]] - SWAP of 8G[[BR]] - 'basic' ZFS of the rest for /home, /var, /tmp, /, /usr, /usr/ports and /Programs[[BR]] (arguably a not-unreasonable configuration so one can later set separate ZFS quotas on each mountpoint's file system, and compression on /usr/ports) The key problem in the above turns out to be specifying /usr/ports as a mountpoint for the ZFS pool. Installer correctly creates tank0 with all the stipulated mountpoints (including tank0/usr/ports) then proceeds through ""pc-sysinstall: Starting Extraction"" and ""pc-sysinstall: Extraction Finished"" steps. However, during final tidying up and resetting of ZFS mountpoints, the installer barfs when attempting ""zfs set mountpoint=/usr/ports tank0/usr/ports"". Seems that the backend creates tank0/usr and tank0/usr/ports in the correct order. From pc-sysinstall.log: {{{ [...] zfs create -p tank0/usr Running: zfs create -p tank0/usr Running: zfs set mountpoint=/mnt/usr tank0/usr Running: zfs set atime=off tank0/usr zfs create -p tank0/usr/ports Running: zfs create -p tank0/usr/ports Running: zfs set mountpoint=/mnt/usr/ports tank0/usr/ports Running: zfs set atime=off tank0/usr/ports [...] }}} It tries to reset the mountpoints in the reverse order: {{{ [...] Running: zfs set mountpoint=/var tank0/var Running: zfs unmount tank0/var Running: zfs set mountpoint=/usr/ports tank0/usr/ports cannot mount '/usr/ports': failed to create mountpoint property may be set but unable to remount filesystem Error 1: zfs set mountpoint=/usr/ports tank0/usr/ports [...] }}} I surmise that because /usr/ports doesn't exist in the 'real' file system (or perhaps because /usr is a UFS file system at this point in the installation process), the ""zfs set mountpoint=/usr/ports tank0/usr/ports"" fails in an unexpected way, causing the entire installation to abort. (Would this be helped by including a ""mkdir -p"" before each ""zfs set mountpoint"" to ensure the target exists?) Or perhaps there's some other explanation. Anyway, hope this helps. cheers,[[BR]] gja " gja 377 Installer installs to wrong hard disk Installer 9.0-BETA1 System Defect kris closed 2011-08-09T06:30:43-07:00 2012-01-26T12:22:22-08:00 "Hi, I've been testing 9.0 Beta for a couple of days now and think I found a bug. First I installed the cd version for I didn't have any dvd's, this went well and everything worked as it should. When I bought some dvd's yesterday I thought I'd install the 64bit version. Again i ran the installer and did everything exactly the way I did before. Tripple checked if I choose the right hd for the install, wasn't hard since the internal hd was called ada0 and my external drive I wanted to install to was called da0. The sizes of the disks were also correct. I partitioned the external disk to have a 7G root partition, made a swap of 4G and took 70G for /usr. This is what I end up with on my '''internal''' disk: /dev/label/rootfs0 74G 384M 67G 1% / /dev/label/usr0 170G 5.9G 150G 4% /usr No more signs of Windows, Funtoo, KxStudio or RHEL nor my data partition, the first PC-BSD install on the external disk has been untouched by the installer. Since I found out post-installation I don't have the install log." socialdefect 466 Install media can't mount disk from encrypted PC-BSD installation Installer 9.0-BETA3 System Defect kris closed 2012-01-10T02:01:10-08:00 2012-09-04T07:37:25-07:00 "So, I see here probably two bugs/problems - 1) we can't get our encrypted disk mounted for restoration purposes (if shiFt happened) 2) no way to upgrade currently such setup. Step to reproduce: Install PC-BSD with password-encrypted option; Boot from install media again You can't attach partition (probably due to keys not found)" yerenkow 494 Internet installation from PCBSD9.0-x64-USB-bootonly.img.bz2 not working Installer 9.0-RELEASE System Defect kris closed 2012-01-24T10:03:24-08:00 2012-01-26T12:31:18-08:00 when i go to install it i set network as DHCP click on next then the internet installation is grayed out cpatrick08 604 AppCafe not working behind proxy. Installer 9.0-RELEASE System Defect kris closed 2012-05-01T07:56:40-07:00 2012-06-26T09:49:47-07:00 "When attempting to run the AppCafe application, I receive the error {{{ ""Missing meta-files for RepoID: 001. This is normally due to the internet connection being offline or mis-configured."" }}} even after configuring the proxy through the PCBSD Control Panel under Network Configuration. My /usr/local/etc/pcbsd.conf file contains the following: {{{ # PC-BSD Configuration Defaults # Default PC-BSD Mirror for System Updates / Meta-Pkgs PCBSD_MIRROR: ftp://mirrors.isc.org/pub/pcbsd PCBSD_PROXYURL: http://wall.ad.selinc.com PCBSD_PROXYTYPE: HTTP PCBSD_PROXYPORT: 8080 }}} This has been fixed in version 9.1 " logavanc 640 cannot boot usb-bootonly image Installer 9.0-RELEASE System Defect kris closed 2012-08-27T20:47:35-07:00 2012-09-25T10:15:36-07:00 "I am trying to install PCBSD on my lenovo ideapad y570 using the 9.0-release-usb-bootonly image, and it refuses to boot properly, telling me that I should look at my xorg.conf in regular mode, and not giving any information in vesa mode. I think it may be due to my nvidia graphics driver, but it is not clear how to edit any files when the error presents itself I have tried using the more recent 9.1 RC1 image in hopes that the issue has been fixed and I need only wait for 9.1, but that gave me a mount prompt, where I must type in something along the lines ufs:/dev/ada2s1 in order to boot. when I typed the name of the image containing the pcbsd image, it gave me an error 19 on a much smaller note, the 4 gigabyte usb images don't quite fit on my 4 gigabyte flashdrives :(" empathica 676 Installer not setting up default mountpoints if trying to install on ZFS-Mirror Installer System Defect kris closed 2012-10-17T06:25:54-07:00 2012-10-17T09:50:05-07:00 "Environment: Computer with 2 identical disks which should become bootable ZFS mirror. Goal: Install PC-BSD 9.1 RC2 on an ZFS mirror of 2 identical harddrives using full disks Problem: Installer not setting up pre-defined mountpoints if ZFS-Mirror configuration selected. How to repeat: - In sysinstaller selected ""Advanced"" option for disk selection - Selected first of two disks (ada0) and enabled GPT - Selected ZFS and to install MBR - Selected ZFS Mirror and selected my second disk (ada1) - Click on next...only shows me an empty windows with no pre-defined mountpoints - Install fails because no mountpoints are defined. If i try to add mountpoints manually, i only get numbers of ""1, 2..."" into the list instead of any names and proper defined mountpoints. Doing the same without ZFS-Mirror (just single disk) fills me nicely pre-defined mountpoints and installation to single disk works as supposed." cla 126 Need to describe what exactly is a primary partition during installation Installer 1.5 System Enhancement closed 2008-05-05T05:50:24-07:00 2008-05-05T09:36:57-07:00 " I had a lot of trouble trying to install pcbsd because it would not show the partition that I wanted to install on. After going into a forum I learned that pcbsd only installs on primary and not logical partitions. Please include a reminder in the installation routine that pcbsd will ONLY install on primary and NOT logical partitions...and it would not be a bad idea to also describe the difference between a primary and logical partition for those who do no know. If you want pcbsd to become popular then normal people will have to be able to install it with a minimum of fuss and confusion. People want to install something without having to go into forums to dig up information on why it is not installing. Assume that the average Joe installing pcbsd knows next to nothing and will have to be taken by the hand thru the process. I think that you cannot be too explicit. I also know that this is much more difficult than simply adding text but if you could include a utility to convert logical to primary partitions...and even repatition that would be great. Thank you, Kirk" kirk 200 Encrypted partitions have no ability to use passwords Installer System Enhancement closed 2009-12-22T06:38:53-08:00 2010-07-07T12:09:03-07:00 "Probably not for 8.0, maybe for 8.1. Geli can be used not only with key-files, but with passphrases too. Good idea to have this ability, for example not during system start, but manually. Creating such partition: generate keyfile, enter super-user passphrase (to recover), enter user passphrase. Mounting and working with such partition: during start or manually - enter passphrase, mount to specified directory." yerenkow 210 install with wireless keyboard and mouse... Installer 8.0-ALPHA System Enhancement closed 2010-01-03T21:13:04-08:00 2010-01-06T11:22:39-08:00 "Hi, PCBSD, I know, it looks like a weird request, but on Linux my keyboard (Hewlet-Packard 2007) and mouse always work straight away so I can perform the install, but on FreeBSD they don't work. I was expecting PCBSD to solve this, as you work more for the home user. But no...Why not BSD if Linux always succeeds? I know, Linux is not BSD, but besides this...I was thinking BSD was the best OS around.And I can't install... " ToranK 392 would it be possible to decrease the usb img filesize low to 3.5GB? Installer 9.0-BETA1 System Enhancement kris closed 2011-09-16T01:55:26-07:00 2012-01-27T06:13:02-08:00 "would it be possible to decrease the usb img filesize low to 3.5GB? I only had a usb disk device with size 3.6GB, I want to testing the PCBSD 9.0, but the installer img (usb) is larger . i had no plan to bought a larger USB Disk ." netroby 86 french keyboard not configured Installer 1.4.1 1.5 System Defect closed 2008-01-02T10:34:46-08:00 2008-03-04T10:11:28-08:00 "At installation : When the selected country is France, the french keyboard is not selected. The key board remains the US default keyboard. Then when the passwords and the user names are asked, it is very difficult to know which password is actualy entered. It worked fine with PC BSD 1.4" nox1492 45 Different versions: Light, Thin Client, LiveCD, Server Installer 1.3.4 7.0 System Enhancement closed 2007-09-14T06:40:05-07:00 2008-09-04T11:53:23-07:00 "Create different versions: LiveCD Thin Client version Light/laptop version (Fluxbox, IceWM) Server version Depending on the user's selection he will see a diff New components module thingy so that a Server class installation could have PAMP or whatever as an optional module to install. Same with workstation, really. Click a radial and it's an entire different set of default optional packages. " gerard 133 install from USB Installer 1.5.1 7.0 System Enhancement closed 2008-07-04T14:22:05-07:00 2008-09-04T11:48:52-07:00 "So, hi. This time is about installers. I'm testing the pcbsd 7 new alpha and is very good. So, many people ask for one dvd and that is good, but, why not a installer that run's from USB ? can be a stupid sugestion, but, is less plastic burned and 100% more ""Green"" encouraging people to use that. =)" josiaslg 123 using custom disk partitions causes newfs to skip/fail during install Installer 1.5 7.1.1 System Defect kris closed 2008-04-24T00:35:00-07:00 2009-06-13T12:19:02-07:00 "This is actually with the new 1.5.1 installer, but there is no option for that version on the ticket. I have not tried 1.5 as I do not have the ISOs and do not see them easily available as the legacy version is 1.4.1. My system is an old Dell PowerEdge 2400 server, dual P3-600 with 1GB ECC SDRAM. I've disabled onboard RAID and removed the SCSI backplane to make way for IDE cabling. I installed an old 160GB ATA/133 drive and connected it to a HPT368 based UDMA66 capable PCI card because there are no IDE headers on the motherboard. Still has a SCSI CD-RW for booting the install disc. Interestingly, the ATA controller must be in the single 32bit slot in the system as putting it any of the 64bit slots causes all attempts to access the drive to fail, but that is a FreeBSD driver problem (works in Linux, so not a hardware issue). When I get to the drive selection in the install, I choose to use entire disk, not install the bootloader, and to customize the partition layout. On the disc partition setup screen, I can choose to use encrypted swap space without any adverse effects. However, if I choose to customize disk partitions in order to crank swap up to match physical RAM, the install ultimately fails. If I don't touch this, the install proceeds correctly. In the working case, the install progress starts with fdisk /dev/ad0 and then newfs /dev/ad0s1 (shouldn't that be ad0s1a really?), and then proceeds to copy a whole mess of files. In the failure case, the install starts with fdisk /dev/ad0, then quickly flashes by and begins the copy, effectively installing to the md0 backed root which quickly fills. I can't tell if the newfs step is totally skipped, or if it attempts and fails since it goes by so quick. When the files are vfailing to install, the messages resemble those reported in ticket #79. Also, the install is claimed successful at the end, but rebooting results in a Operating System Missing error. I tried working around my problem by booting to the emergency console and creating my own partitions and file system with bsdlabel and newfs. Unfortunately, the installer has no way to use these. Choosing a Upgrade/Repair shows no available PCBSD installs. Choosing a Fresh Install forces writing of a new bsdlabel created by the installer, which then fails to properly run newfs. " mrezny 169 pc-bsd 7.1.1 x86-64 install failure Installer 7.1 7.1.1 System Defect closed 2009-08-10T08:26:02-07:00 2010-07-07T12:36:42-07:00 "zfs warning recommened minimum kmem_size is 512 expect unstable behavior consider tuning the vm.kmem_size and the vm.kmem_size_max in the /boot/loader.conf zfs fs ver 13 zfs storage pool ver 13 geom label mdo is ufsid/4a4ce26a63012a83 trying to mount root from ufs:/dev/md0 " unixdawg 39 Partition manager Installer 1.3.4 7.1.1 System Enhancement kris closed 2007-09-14T05:53:44-07:00 2010-07-07T12:24:40-07:00 Build partition manager into Installation gerard 135 Fast Boot for Laptops Installer 7.1.1 System Enhancement kris closed 2008-09-11T04:36:52-07:00 2009-12-29T10:02:59-08:00 "Detect if we on Laptop; Propose to install not big FreeBSD boot loader (F1, etc), but a little MBR boot loader. We should select this by default only if we see exactly one hard drive with a whole partition, dedicated to PC-BSD. If user change mind, and chose split disk and leave one more partition - we should recommend him install boot loader (so he could boot to other OS) If user preferred to choose bootable hard drive in BIOS, then he could make benefit of fatser loading (almost 10 seconds there). " yerenkow 177 Unable to continue installation Installer 7-BETA1 8.0 System Defect closed 2009-09-01T13:31:34-07:00 2010-07-07T12:30:12-07:00 "If some file didn't copied (read/error) or else, there is no option for retry/ repeat, change media type. If I start install from dvd/usb, and it fails, would be nice to see such options: 1. Get only this file from other media (inet, fs, usb, dvd, cd) 2. Continue from other media Simple restart is not an option in 2009 year!" yerenkow 185 Missing 3rd CD results in broken install Installer 7.1.1 8.0 System Defect closed 2009-11-06T07:29:04-08:00 2009-11-09T06:48:11-08:00 "I recently tried installing PC-BSD 7.1.1 x86 into Virtualbox using CDs 1 and 2. When asked about the additional optional software, I selected some, and had neglected to read the bit about it requiring the third CD. When it had virtually finished the install and asked for the third CD, I had to click Cancel because I didn't have it. The installer told me that I'd be aborting the install and rebooted the machine. The new system came up to a text prompt. My user account hadn't been created. I started kdm manually, and basically the system was pretty broken - su didn't work, there was no networking, etc. It seems that some of what the installer is meant to do, happens after dealing with the 3rd CD, and if there is software to be installed from there and the user cancels, this extra configuration doesn't get done. If the user cancels at the ""Please insert CD 3"" prompt, the installer should carry on and configure the system as normal. Instead, it fails to configure the system, leaving it pretty broken." christopher_lees 189 "sysinstaller - inactive ""save"" button for swap partition" Installer 8.0-ALPHA 8.0 System Defect closed 2009-12-14T11:46:00-08:00 2009-12-14T12:10:17-08:00 "In ""Customize Disk Setup"" mode, when it is chosen ""Swap"" as the type of new partition, a mount point field becomes to inactive. When mount point is not filled, ""Save"" button is not accessible. The autofilling by ""none"" is necessary for mount point when swap is selected. " olevole 199 Encrypted partitions - not enough warning to users Installer 8.0-ALPHA 8.0 System Defect kris closed 2009-12-22T06:34:27-08:00 2009-12-28T13:38:14-08:00 "Currently, encrypted partition means geli, no password, key generated from /dev/random and stored in /boot. User not warned that if he/she lost this keys, all data is garbaged. User must be properly warned (by big red letters), and encouraged to backup this keys somewhere." yerenkow 212 PCBSD Installer won't recognize new AHCI disks (/dev/ada*) as system disk Installer 8.0-ALPHA 8.0 System Defect closed 2010-01-05T18:35:19-08:00 2010-01-06T11:32:43-08:00 "How to repeat: At the beastie menu during boot, escape into loader prompt, load ahci, boot, then on a system with AHCI enabled, the AHCI disks won't get recognized by the installer, which thinks the disk does not exist. It would be probably more reliable to get disk list through sysctl kern.disks? Note that this problem is found in PCBSD 8.0-BETA" delphij 214 8.0 beta 64 bit installer failed Installer 8.0-ALPHA 8.0 System Defect closed 2010-01-06T06:12:14-08:00 2010-07-07T13:39:33-07:00 "tried to install pc-bsd 8.0 beta 64 bit on a lenovo R61 1st try did not show dvd in drive 2nd try reburied the dvd @ slower speed still the same this is a new hard drive got 7.1.1 64 it installed with no problems " aryr100 225 unable to start PCBSD 8.0-RC amd64 graphical installer Installer 8.0-BETA 8.0 System Defect kris closed 2010-01-27T19:51:42-08:00 2010-07-08T07:49:20-07:00 "When I boot PCBSD 8.0-RC amd64 on my Dell Precision T5500 desktop with NVIDIA Quadro NVS 295 display adapter and Hitachi HDT721032SLA360 hard disk drive, I get the following message: FreeBSD 8.0-RELEASE-p2 (PCBSD) # 10: Thu Jan 7 14:30:53 EST 2010 -PC-BSD is Loading... Please wait... Detecting X Setup... Autoconfiguring X Server... done ERROR: Failed to start GUI Installer with detected driver... Trying VESA mode... cp: /root/cardDetect/XF86Config - usrlocal.compat: No such file or directory ERROR: Failed to start GUI Installer with VESA mode... Please check your settings in the /etc/X11/xorg.conf file [Press Enter to Continue] When I pressed Enter, I was shown a text menu with Start Graphical Installer, Start Graphical Installer in VESA mode, Utilites and Reboot as options. When I selected ""Start Graphical Installer"" or ""Start Graphical Installer in VESA mode"", I was brought back to this same text menu. Does PCBSD support NVIDIA Quadro series of display adapters yet?" yuvaraj 230 PCBSD-8 Installer 8.0-BETA 8.0 System Defect kris closed 2010-02-01T00:05:09-08:00 2010-02-03T09:06:38-08:00 "PCBSD is fabulous but there are various install Bugs to mention. 1) When the installer gets stuck in an error it states that it will send an email report summary. This email sender appears to work but it never actually sends anything back to my email address. Check it out - does it send anything back to yourselves? 2) The certificate for this Trac site is not certified, apparently. Would be good to get this to be accepted by FireFox. It looks bad for newcomers. 3) The 32 Bit (x86) installer is not robust like the 64 bit one is. On both BSD-8 Beta and the RC1, the x86 installer will not work on my HP ""Pavilion"" A410n, 2.8 Ghz, single processor. It gets every error on the way through and I can correct some of them. The PCBSD x86 installer finally always halts at an ""un-demountable"" point, something to do with the disk-drive ? I instead run the new Linux Mint 8 RC1 on it and that installer works fast and perfectly, with no intervention, sticking or halting. It adjusts itself on the way through, whereas the PCBSD x86 installer gets stuck and waits for user input. Anyways, the Mint-8 FluxBox RC1 installer is worth checking out - it's a winner ! But the PCBSD-8 64 bit installer works perfectly too, on my other HP, the 64 bit dual core AMD. So thats a mystery - - - Thanks & good luck with all of this. Ken Gibbs * * *" GeeKen 265 BTX loader hang on after detecting a SATA drive Installer 8.0-RC2 8.0 System Defect crowncode closed 2010-02-21T04:30:17-08:00 2010-05-31T18:06:28-07:00 "BTX loader hang on after detecting a SATA HDD drive. If the SATA HDD is disabeled in BIOS then everything is OK. PC BSD ver. 8.0 beta, tested, does install OK, with or without SATA. So, smth is wrong in 8.0 RC2 BTX loader or immed. after" crowncode 276 Live DVD does not work Installer 8.0 8.0 System Defect kris closed 2010-03-02T10:59:42-08:00 2010-07-08T06:46:12-07:00 "I've burned the image of FreeBSD 8.0-RELEASE-P2 on a DVD+RW. When booting on my VAIO VGN-FW198U, it stops in: ""Checking for install image on: /dev/cd1 Unable to mount: /dev/cd1 Checking for install image on: /dev/cd2 Unable to mount: /dev/cd2 Checking for install image on: /dev/cd3 Unable to mount: /dev/cd3 ... And the same for acd0, acd1, acd2 and acd3 ... Error mounting install image Available device are: "" And so I can run the Live DVD which means I can't test it or install it. " interant 289 virtualbox: installation freezes at early stage of booting up Installer 8.0 8.0 System Defect kris closed 2010-04-06T02:53:13-07:00 2010-07-07T12:38:41-07:00 "I try to install the newest PCBSD, since I am new to this distro, I am doing this within VirtualBox. I chose default install, then the system/installer boots up but soon it freezes with last messages: Trying to mount root from ufs:/dev/ufs/ROOTFS warning: no time-of-day clock registered, system time will.... 768MB for guest (PCBSD) system." macias 295 PCBSD Boot CD Installation Installer 8.0 8.0 System Defect kris closed 2010-05-07T12:12:05-07:00 2010-07-07T12:47:47-07:00 "When boot from cd to install pcbsd btx hangs and restart my laptop/pc after I disable USB-FDB Legacy emulation in BIOS I was able to boot and install normaly, Also simmilary bug was in freebsd 8.0 when btx load and you hit enter to start boot/install laptop/pc restarts like I describe above. my hardware: Toshiba Portege R600 notebook" SCSI 297 Slice editor didn't store last selected partition Installer 8.0-BETA 8.1 System Defect kris closed 2010-05-18T00:19:01-07:00 2012-07-26T10:32:57-07:00 "I have ada0, da0s1, da0s2 (for example) I'm trying to install to da0s1; I create new slice on da0s1, then I want add more slices, and ada0 is selected instead of da0s1. It's easy to confuse yourself, and trash working system. I propose that when opening dialog where slices adds, there will be selected last partition, which was used when create slice. Not last partition which was used when ""save"" pressed, only create slice, not edit-save. I think this behavior will be safer." yerenkow 298 Installer fails Installer 8.0-BETA 8.1 System Defect kris closed 2010-05-18T00:21:43-07:00 2010-07-08T07:34:45-07:00 "I have reproduceable bug here. I created partition da0s1 which is 65536 mb. when I trying to partition it like this: 2048 / 3072 swap remain /usr installer can't do this, failing over and over. I could avoid this, only by creating da0s2 3072 for swap, and create / slice for whole da0s1 possibly some bug with calculation of sizes;" yerenkow 299 Crypted slice Installer 8.0-BETA 8.1 System Defect kris closed 2010-05-18T00:24:02-07:00 2010-05-25T06:31:13-07:00 "When I click ""encrypt"" in slice dialog, popup appears, with ""enter passphrase"". I click ""cancel"", but checkbox is still checked. It's bug." yerenkow 306 Cannot boot from mirrored zfs setup Installer 8.1 8.1 System Defect kris closed 2010-06-07T22:20:32-07:00 2012-06-25T10:36:48-07:00 "Attempting to install the AMD64 disc onto an AMD Athlon X2 system with 4GB of RAM: I have 2 750GB disks, ad8 and ad10. In the installer, I created a 4 GB SWAP partition on ad8, then setup the rest as mirrored zfs pool with ad10 added into the pool and mounted the pool on ""/"". The installation went fine, but upon restart the computer would halt at the POST screen where it displays the HDDs detected, all CDROM and HDDs were detected and displayed, but the boot process is frozen at this point. This screen also displays the text that tells the user to press ""ESC"" to load the boot menu, or ""DELETE"" to enter the BIOS. I then tried a different partitioning setup, where both disks have a 2GB SWAP partition, and the rest of the free space on ad8 is set as ZFS pool with ad10 added into it and mounted on ""/"". This configuration results in a ""permission denied"" error when creating the SWAP on ad10. Scrolling back on the log shows that the boot records were created using pmbr. I saw that in changeset 6766 (http://trac.pcbsd.org/changeset/6766/) that this was supposed to be updated to use gptzfsboot only, I suspect that this could be the reason why my disks were not bootable even after a successful install using the first partitioning setup." billksun 312 Installing with GELI w/o passphrase fail Installer 8.1-RC1 8.1 System Defect kris closed 2010-06-23T00:07:02-07:00 2010-06-23T05:39:05-07:00 "I've been using pc-sysinstall whith it's automated installation feature, and i've found a bug that's preventing me to use GELI without a passphrase. This bug is located in the backend and is also reproducible with the graphical installer. Here's a part of the config i've been using : {{{ disk0-part=UFS 500 /boot disk0-part=ZFS.eli 50000 / disk0-part=SWAP 4096 none commitDiskLabel }}} I've attached a small patch fixing this bug (and a small typo in a message). " Madtree 320 Can't unlock screen in Live mode Installer 8.1-RC1 8.1 System Defect kris closed 2010-07-01T05:05:23-07:00 2010-07-06T11:03:35-07:00 "1. In Live mode press Lock screen. 2. Move mouse (press any key, etc.) to stop the screen saver. 3. There is a dialog asking for password -> trying with empty pass has no luck." vans 329 Installation error claims /var is too small when it isn't Installer 8.1-RC1 8.1 System Defect kris closed 2010-07-16T14:55:43-07:00 2010-07-19T07:24:56-07:00 "I am attempting to install PC BSD 8.1 RC1 amd64 on an Intel i7 with two hard drives (SSD is ada1 and normal is ada0). My first attempt involved me creating partitions manually with /var being set to 2GB; I then got an error message saying ""'/var' file-system is below the required minimum: 8000. I thought that was a high minimum for /var, but switched it to 8GB, then 10GB and got the error both times before aborting the install. I thought that perhaps it wasn't reading the new value of /var. Next install I try the same thing, putting in the following values: ada1 / 2048 ZFS ada1 /usr 5574 ZFS ada0 none 12288 SWAP ada0 /var 10240 ZFS ada0 /tmp 10240 ZFS ada0 /root 1024 ZFS ada0 /home 819200 ZFS After getting the same error message, I try different variations thinking it may be the ZFS type, but none of the three UFS options work either. I am not able to continue with the installation, and do not want to auto-partition as I want my SSD to receive / and /usr which should be the least written to once the system is up and running." joehache 326 gjournal'ed fstab entries don't have async option Installer 8.1-RC1 8.1 System Enhancement kris closed 2010-07-13T00:25:11-07:00 2010-07-13T07:40:30-07:00 "/etc/fstab entries, generated by pc-sysinstall have no async option. Possibly, it's worth adding this option, according to http://www.freebsd.org/doc/en_US.ISO8859-1/articles/gjournal-desktop/article.html" vans 383 Installer Problem on Bsd Partitions Installer 9.0-BETA1 9.0 System Defect kris closed 2011-09-08T14:10:30-07:00 2012-01-26T12:44:18-08:00 "When you try to install pcbsd beta 1.5 on existing freebsd partitions (by selecting advanced and pointing mount points) installer fails after it writes table to harddisk. You must reboot and start installation again. Tried on 3 laptops in order: ibm t22 asus u46 asus a52f Sorry i dont have the err message handy and i can not regenerate the errors as paritions are wiped out. " kuku 394 Login with incorrect symbols Installer 9.0-BETA1 9.0 System Defect kris closed 2011-09-28T22:31:38-07:00 2011-09-29T08:40:21-07:00 I've tried making a login K+P during installation. Installer hasn't showed neither warning, nor refused to continue. So I've successfully continued installation. After reboot, I couldn't log in to the system in gdm. I've examined /etc/passwd - there is no such user (well, it shouldn't be there, cause it's incorrect ad far as I know). Btw, when I've tried to use non latin characters in username in installer, there was a warning. vans 404 Can't use non latin keyaboad layout in installer Installer 9.0-BETA2 9.0 System Defect kris closed 2011-10-15T01:23:54-07:00 2011-10-20T09:51:46-07:00 I've chosen Russian keyboard layout in Installer. Can't create users / passwords at the user creation step, because can't switch keyboard layout to U.S. English. Alt-Shift, Ctrl-Shift, both Shift don't switch layout. Tested in BETA2. vans 414 Mixing case in login in installer triggers warning Installer 9.0-BETA3 9.0 System Defect kris closed 2011-11-02T07:29:31-07:00 2011-11-02T08:02:25-07:00 "At user creation screen mixing upper-case and lower-case letters triggers the warning at bottom. How to reproduce: try making login smth like aBc. After entering 'c' you'll see the warning. Haven't tried to go to the next steps. Btw the version is 9.0-RC1." vans 431 Installer should fail gracefully on fetch fail Installer 9-SNAPSHOT 9.1 System Defect kris closed 2011-12-03T00:12:38-08:00 2012-07-03T10:16:59-07:00 Instead of a hard fail when the installer is unable to reach a mirror it should offer to reconfigure the network interface and/or choose another mirror. eadler 495 no man pages accessible in PCBSD-9.0-RELEASE media Installer 9.0-RELEASE 9.1 System Defect kris closed 2012-01-25T01:53:09-08:00 2012-01-25T07:06:25-08:00 "Trying to access man pages after booting up installation medium results in ""man: Command not found."" Tested with PCBSD9.0-x64-USBFULL.img" Nukama 28 PORTS on RELEASE DISC - insufficient info Installer 1.4-DEV / 1.4-BETA System Defect closed 2007-09-09T00:09:42-07:00 2007-09-11T10:41:55-07:00 When you have installed 1.4RC and PORTS from CD2, you find you have no bpm or kports available -you have to make them. You then find that bpm will blowup and kports will give you wrong info because you need to do make index first . Could this be done automatically ?. How do you know which PORTS and from what date you have got from the CD . mgreen 79 The installer claims success even if there were errors Installer 1.4 System Defect tim closed 2007-11-25T20:02:22-08:00 2009-06-13T12:06:16-07:00 "The installer claims success regardless of errors. During one failed installation attempt, I noticed a torrent of error messages like this one (quoting almost exactly how it looked on my screen): filename: Failed to create /usr/local: No such file or directoryCan't create /usr/l In spite of these errors, in the end the installer claimed that the installation was complete. Evidently it didn't notice that the installation had failed. (If I remember correctly, this torrent of errors appeared during an installation that failed because of the error that I described in [http://trac.pcbsd.org/ticket/76 ticked #76]. Thus the failure to create /usr/local is probably resolved automatically when ticket 76 is resolved, and doesn't need to be addressed here. The problem that I'm addressing here is that the installer should know when it has failed.) " Kafpauzo 124 no working mouse during install Installer 1.5 System Defect closed 2008-04-24T00:46:21-07:00 2008-04-24T19:04:02-07:00 "This is actually with the new 1.5.1 installer, but there is no option for that version on the ticket. I have not tried 1.5 as I do not have the ISOs and do not see them easily available as the legacy version is 1.4.1. This is the same hardware as mentioned in ticket #123, but this issue is minor in comparison and a separate issue so it deserves its own ticket. During boot, psm0 is installed and finds my mouse as an IntelliMouse. The actually mouse is a basic Logitech optical 2-button + scrollwheel. The system is connected through a good KVM which switches without dropping the PS/2 connection. I'm sure its not a hardware problem as booting Linux gets a working mouse. When X comes up at the start of install, there is a mouse cursor in the center of the screen, but it won't move. There is no screen corruption, the chosen mode looks decent, and I can still use the keyboard to navigate the installer. So, this is an annoyance but not critical by any means. I have not yet established whether the mouse works once the system is fully installed as I have not yet completed an install, mostly due to the other previously mentioned ticket. " mrezny 213 Installation disk load some unnecessary kernel modules Installer 8.0-ALPHA System Defect closed 2010-01-05T18:41:49-08:00 2010-07-08T05:16:48-07:00 While booting from the CD-ROM, the installation disk would load a lot of kernel modules at the beginning, e.g. geom_eli, geom_journal, geom_uzip, if_ipw, etc. This process can be deferred to when the user is choosing installation type in background, if possible, to reduce the loading process (if the user won't use ZFS then there is no need to load it, it can even be loaded on-demand when the user chooses ZFS). delphij 232 WARNING $isdn_enable, $idmapd_enable not set properly Installer 8.0-BETA System Defect closed 2010-02-02T00:17:26-08:00 2010-02-02T08:50:26-08:00 "After upgrade form 7.1.1 to 8.0-RC While booting Warning messages on console /etc/rc: WARNING: $isdn_enable is not set properly - see rc.conf(5). /etc/rc: WARNING: $idmapd_enable is not set properly - see rc.conf(5). Cannot find these variables in /etc/rc.conf Old scripts not cleaned-up during upgrade?" bitraptor 239 Two inconsistent hostname entries in /etc/rc.conf Installer 8.0-RC System Defect closed 2010-02-08T00:04:06-08:00 2010-02-08T08:04:33-08:00 "Fresh install leaving two inconsistent hostname entries in /etc/rc.conf: hostname=""pcbsd"" at beginning of file, hostname=""pcbsd-nnnn"" (nnnn some number) at the end of file under ""#Auto enabled NICs from pc-sysinstall"". /etc/hosts uses pcbsd-nnnn[[BR]] This situation leads to a parsing error of pf.conf resulting in packet filter not beeing able to load the rules[[BR]] p.s. before committing the install I went back some steps to modify a setting, don't know whether the problem also arises when going straight through" bitraptor 240 "Invalid keymap value ""ch.iso"" in /etc/rc.conf" Installer 8.0-RC System Defect closed 2010-02-08T00:08:54-08:00 2010-02-08T07:52:48-08:00 "Selecting a Swiss-German keyboard in the installer leaves an invalid keymap=ch.iso in /etc/rc.conf. Correct entry would be keymap=""swissgerman.iso"" (""ch"" is the value for Option XkbLayout in xorg.conf)" bitraptor 270 bash is not installed during installation Installer 8.0 System Defect kris closed 2010-02-25T02:26:33-08:00 2010-02-25T06:32:53-08:00 I chose to install FreeBSD. For a new user I set shell to /usr/local/bin/bash. After reboot I tried to login with the user, but I couldn't, because '/usr/local/bin/bash' was not found. I started to investigate the issue and found out that the whole /usr/local is empty :) atrox 280 upgrading FreeBSD is not possible Installer 8.0 System Defect kris closed 2010-03-15T02:34:15-07:00 2010-07-07T12:39:19-07:00 I installed a fresh FreeBSD-7.1 and tried to upgrade it with PC-BSD installer. It doesn't seem possible, because when I select Upgrade, the system is not listed there. atrox 307 issues in manual partitioning during instalation Installer 8.0 System Defect kris closed 2010-06-09T11:04:43-07:00 2010-07-07T12:44:10-07:00 "I found these things during installation in manuall disk layouting, which I recommend to adjust. I used netbook and did clean installation from i386 DVD. 1. encrypted ZFS can be enabled for root partition, but is no supported and instaal end with error. 2. ZFS is supported, but I ended four times with freezed PC during install somwhere between 30% and 60% completed. 3. UFS is supported, but the installation take one day, when target is SDHC Class 6 (UFS is default, recommend UFS + S which take few hours) " navratil 347 Selecting encryption causes timezones to disappear Installer 8.1 System Defect kris closed 2010-08-14T00:00:12-07:00 2012-07-09T10:02:55-07:00 "Installing PCBSD 8.1 from x64 DVD. I've seen this a couple of times in different installation attempts/experiments recently. If I select a custom partition configuration and set a partition to have encryption, the next screen (Timezone selection) offers an empty drop-down list of timezones, and I cannot select any timezone. If I do an installation without any encrypted partitions, the drop-down list of timezones seems to have all timezones available. (In each case I was attempting to encrypt the partition to sit underneath a ZFS pool.) Hope this is of some use. cheers,[[BR]] gja " gja 359 Keyboard layout list is unordered Installer 8.1 System Defect kris closed 2011-01-26T10:19:12-08:00 2011-01-27T08:09:37-08:00 "The keyboard layout list in the installer appear not to be ordered. For example: Ireland Pakistan Maldives South Africa Esperanto Nepal Negeria" brucec 362 pc-sysinstaller only reserves 512MB for / if installing FreeBSD Installer System Defect kris closed 2011-02-06T06:36:45-08:00 2011-02-07T07:14:34-08:00 On line 460 of sys-diskwidget.cpp pc-sysinstaller sets the minimum size of / to 512MB if FreeBSD is being installed. 1GB is considered the minimum nowadays to hold two kernels (kernel and kernel.old). brucec 381 /dev/da1 missing and etc during installation Installer 8.1 System Defect kris closed 2011-09-06T15:12:28-07:00 2011-10-05T05:45:09-07:00 "Hi there, my installation stopped when a message display to me: they mention something about the da1,da2,da3 and da4 missing. The thing is, I was able to install PC BSD fine before. Then suddenly, I have tried on several hard disk and the message is still the same. Here is the install logg report. My Computer HP pavillon a1630n CPU AMD Athlon 64 X2 5200+ Ram: 3x1024 GB DDR2 I have attached the error log to the ticket Regards. " richardphat 538 pc-sysinstall unable to parse commands containing equals sign in pc-sysinstall.cfg Installer 9.0-RELEASE System Defect kris closed 2012-02-03T07:52:07-08:00 2012-05-01T07:11:18-07:00 "The functions-parse.sh file contains several functions to extract values from a key/value pair delimited by an equals sign (""=""). The cut command used to do this extracts the 2nd field only, which truncates commands containing the delimiter character. Example: {{{ runCommand=echo puppet_enable=YES >> /etc/rc.conf }}} This command will be executed as ""echo puppet_enable"" only. Please see the attachment that fixes the parsing problem." glarkin 597 Documentation bug regarding use of netSaveDev in pc-sysinstall.cfg Installer 8.1 System Defect kris closed 2012-03-22T11:04:10-07:00 2012-04-05T08:06:41-07:00 "The wiki page that describes how to create an automated installation (http://wiki.pcbsd.org/index.php/Creating_an_Automated_Installation_with_pc-sysinstall#Determine_Which_Variables_you_Wish_to_Customize) states: netSaveDev= AUTO-DHCP or FreeBSD interface name type of network configuration to enable on the installed system; can set multiple interfaces As far as I can tell, the phrase ""can set multiple interfaces"" only applies when the value of netSaveDev (or netDev) is AUTO-DHCP. Looking through the installer scripts, I don't think there's a way to do this when setting static IPs on multiple interfaces." glarkin 660 Initial install fails when trying to mount DVD to new file system Installer 9.0-RELEASE System Defect kris closed 2012-09-19T09:30:01-07:00 2012-09-24T11:48:41-07:00 "Doing a new install of PC-BSD. Install works fine until the step where the DVD is being mounted to the new file system, install hangs and says it cannot find the media. I tried various ways to test: brand new clean hard drive a partitioned hard drive FreeBSD DOES install correctly. So it looks like a problem with PC-BSD. I am here to help, because I am here to learn." srenfro2 662 Installation fail (i386 usb bootonly 9.0) Installer 9.0-RELEASE System Defect kris closed 2012-10-01T04:12:42-07:00 2012-11-16T12:17:15-08:00 "Hello, I decided to share my experience with installing 9.0 from x86 usb bootonly image. At the end I was able to manage, but that is after several hours w/o sleep, gallon of beer and bag of junk food. So: Test station is laptop Acer 5920g with RAM & Videocard upgrade. 1. I booted from USB stick and each time I had to wait 10-15 minutes for that (dunno why). 2. Ran the installer until the choice between whether from CD/DVD or Internet must be made. You choose Internet. 3. The Internet connection cannot be found so the focus moves automatically to the manual selection of server and path. Say you put for server ""mirrors.ics.org"" and for path ""/pub/pcbsd/9.0/i386"". That path is not working in fact but that is a separate case (maybe in the handbook there is an example for working one?). 4. Now the real problem. You press finnish, so that the installation begins and - it stops. It says that: ''ifconfig inet bge0'' is NOT working and really, the ''inet'' paramater shouldn't be there. Anyway, I solved it in the following way: 1. Reach again the CD/DVD vs. Internet choice. 2. In xterm, I mount the USB, get from there my custom ifconfig replacer. I don't say that it is smart: {{{ #! /bin/sh if test ""inet"" = ""$1"" -o ""inet6"" = ""$1""; then NEXT=""$2 $1 $3 $4 $5 $6 $7 $8 $9"" else NEXT=""$1 $2 $3 $4 $5 $6 $7 $8 $9"" fi `ifconfig_real $NEXT` }}} 3. I set my IP, netmask & route IP. 4. The installer nows finds that it can connect to internet, so I don't need to manually type URL. 5. Before the finnish procedure I unmount my USB, and remove the netmask and route IP. I '''leave''' the card IP though, as the installer does not set it. 6. Voila, I had my PCBSD. Thanks. Hope that this can be useful info for you though. Radoslav." radoslav.tm 674 English Keyboard Variants Are Missing During Install Installer 9.1-RC1 System Defect kris closed 2012-10-11T16:30:01-07:00 2012-11-12T08:02:39-08:00 "PCBSD 9.1 RC1 & RC2 During the install the English keyboard variants are missing when trying to change the keyboard. There is no option for dvorak. Thanks" 9panther 33 Gui Instalation/optmizing/enhancement Installer 1.4-DEV / 1.4-BETA System Enhancement closed 2007-09-13T13:51:59-07:00 2010-07-07T12:26:15-07:00 Add some meu on the top that never changes having advanced options like advance partition... maybe, clean the main install GUI get offing advanced options for users that don't know how using. For advanced users, this top menu give all functionally. Other thing is try to detect the computer processor and the instructions in there. Then, adjust pieces of software to run on that with this new instructions. Optimize more the binary (ok, the size can grow, but in actual days the hard disk will be ok for that) and optionally put everything in some DVD. A on-line installation maybe will be fine to and some introduction in flash or video will be great after the complete installation. I see in the page about professional support. Maybe, create some application in the pc-bsd that in someway have direct contact with support people. Maybe, some option of subscription of this service in the pc-bsd screen on time that the cd can be distributed without enter in the page. So, sorry by the long long post, but is my first hour using PC-BSD 1.4 and is very very very good job. Is my first post and i hope to help in some way. Thanks. josiaslg 127 pcbsd install covered up existing Linux and Windows Grub dual boot Installer 1.5 System Enhancement closed 2008-05-05T05:56:06-07:00 2008-05-05T09:28:51-07:00 When I installed pcbsd it covered up the dual boot of Kubuntu and Windows that I had installed. So to use them I had to then put in the Kubuntu disk to get Linux and Windows...but then lost pcbsd. Now it cannot access pcbsd. It would be nice if the pcbsd installation would integrate itself into the existing grub dual boot and make an automatic triple boot so I could use all 3 when I want. And do this without having to use the command line. kirk 146 entry box to try keyboard layout in installer Installer 7-BETA1 System Enhancement kris closed 2008-10-11T02:30:01-07:00 2009-12-28T09:56:17-08:00 "this should save some time to some people having strange keyboards (ant at venus dot deis dot unical dot it)" anonymous 179 Automatic tuning for ZFS on i386 Installer 7-BETA1 System Enhancement closed 2009-09-05T12:13:26-07:00 2010-05-25T06:36:43-07:00 "Would it be possible to have the installer auto-tune the kernel and other requirements for ZFS on i386? Perhaps this option could set up the parameters dynamically based on the target system's memory? Another possibility could be to have separate optional kernel(s) pre-tuned when ZFS is selected?" BlueJayofEvil 241 Nvidia AGP disabled Installer 8.0-RC System Enhancement closed 2010-02-08T00:14:47-08:00 2010-02-08T07:51:22-08:00 "Nvidia card. Installer does not put hint.agp.0.disabled=""1"" in /boot/devices.hints. Therefore agp.ko loads and prevents setup of nvidia agp thus leaving nvidia.agp.status.status=disabled" bitraptor 246 Installer modifying disk partitions table when installing on existent partition Installer 8.0-RC System Enhancement closed 2010-02-09T01:48:59-08:00 2010-02-26T13:35:09-08:00 "When installing PC-BSD on an existing disk partition (slice) the installer nevertheless touches the disk partition table. When listing the partitions with fdisk -l in linux afer the installation I have a ""partition does not end on cylinder boundary"" message which I did not have before the installation. I know that FreeBSD has some tradition in seeing disk geometry its own way but when installing FreeBSD on an exisiting disk partition (i.e. slice) it leaves the partition table unchanged. So probably the PCBSD installer could also in this case leave the partition table alone." bitraptor 429 Installer should download files in parallel Installer 8.1 System Enhancement kris closed 2011-12-03T00:09:41-08:00 2011-12-28T08:49:41-08:00 A recent network install of PC-BSD took me over 5 hours to complete a install of just the KDE base packages (nothing but the parent 'kde' checked). The mirror was at fault, but it would have helped if it wasn't downloading the files one-by-one eadler 598 Implement configuration of multiple interfaces with static IP addresses during installation Installer 9.0-RELEASE System Enhancement kris closed 2012-03-22T15:30:14-07:00 2012-03-23T17:19:08-07:00 "At the moment, pc-sysinstall only supports configuration of a single interface with a static IP. This enhancement will extend that capability to multiple interfaces. NOTE: I will likely work on this in the coming weeks and will feed changes back for review once they are ready. Putting this ticket here as a placeholder and reminder." glarkin 70 MD5 self-check for install CDs Installer 1.4 7.0 System Enhancement tim closed 2007-10-29T11:36:37-07:00 2008-05-22T10:50:02-07:00 "At the beginning of the installation, the installer could check the MD5 hash of the CD it's being run from. This would prevent problems due to bad burns and reduce support requests on new installations. There should be an option to skip the check, for users that have already validated the hash. I think it would be trivial to code (relatively), and the benefit would outway the effort significantly. (I believe the new MacOSX Lepard has this feature but I'm not sure)" pheet 78 Wrong keyboard layout in Ctrl-Alt-F1 screen Installer 1.4 7.1 System Defect tim closed 2007-11-25T19:23:32-08:00 2009-06-13T12:40:12-07:00 "The screens that you reach with Ctrl-Alt-F1 etc do not use the national keyboard layout that was selected during installation. " Kafpauzo 49 Install / Move config. Installer 1.4-DEV / 1.4-BETA 7.1 System Enhancement kris closed 2007-09-18T20:01:04-07:00 2010-07-07T12:25:22-07:00 "Hi, this is new suggests to the project about installation and after that. In the install, some special version of this software with PXE boot enable. This special version is for companys/schools/government that want install this software in 10 or 100 in the same time without burn discs. In this version, could have some management of pre-installed applications. In fact, this is very useful for big installations. After that, some centralized management of users and your rights on the system, and applications too, can make the system go to do top in companys because of easy network control of all organization. * A option is the system have a PXE inside, and, remote computers boot from there. The other thing is make some application to migrato archives and configurations from Widnows Users Profiles, and easely get emails, personal archives, images, everything that user have and give this to PC-BSD organized in folders. * A option is the PC-BSD have some profile or configuration import, but just some configurations like the custon menu and icons positions. Some default files too, but without change the username or password. Sorry about the long post again. Thanks." josiaslg 88 Last partition not seen at instalation Installer 1.4 7.1.1 System Defect kris closed 2008-01-08T07:47:14-08:00 2009-12-21T14:20:03-08:00 "I use a SATA Hard disc with 3 partitions : - first partition primary partion (used for windows) - second partition extended partition used with 2 secondary partions for Linux - third partition primary partition At installation time, the installer does not ""see"" the third partition and let be the choice of the two firsts only." nox1492 202 Installer shows incorrect numbers of slices Installer 8.0-ALPHA 8.0 System Defect kris closed 2009-12-22T06:42:30-08:00 2009-12-29T09:50:05-08:00 "Probably this is somehow related to hdd size rounding. ls /dev ad4 da0s1 da0s1a Installer shows me ad4s4 with few megabytes, and da0s2 with minus 3 megs of free space. " yerenkow 204 Fresh install with russian language provides Changeme layout Installer 8.0-ALPHA 8.0 System Defect kris closed 2009-12-22T08:01:54-08:00 2009-12-29T09:35:49-08:00 Keyboard layout, after fresh install yerenkow 25 Auto-select keyboard layout and timezone Installer 8.0-ALPHA 8.0 System Enhancement kris closed 2007-09-08T01:21:12-07:00 2009-12-28T13:40:40-08:00 With most languages the installer might automatically choose keyboard layout and in some cases also timezone after user selects language on the first step of the installer. This would save users' time. Derbeth 51 Configuration Wizzard after install. Installer 1.4-DEV / 1.4-BETA 8.0 System Enhancement closed 2007-09-19T12:19:13-07:00 2009-06-13T12:30:25-07:00 "So, here go again. =). This suggests affect the install. First, in the first part of instalation, the partition is make in the hard disk and the base system is installed without create users or config network configuration or install add softwares in second cd. So, after the system install, some wizzard is show in the screen and the configurations begins. Users, passwords, network configuration, and add optional softwares with the option of install by the internet, in this way, some litle files can be downloaded without download the second cd. This is very useful if you just install one software in optional packs and have to download the second cd. So, after install the optional software, the wizzard analyse the software installed and have a option to the user config your account email for example. After that, the user configur the auto update of system and other things that is useful. With the wizzard many new users can make things that is hard before, resuming that the new user never have contact with KDE. So, is that. sorry by the long post again. =). thanks." josiaslg 52 RAID support Installer 8.0-ALPHA 8.0 System Enhancement kris closed 2007-09-20T09:25:23-07:00 2010-03-15T01:54:11-07:00 "The 1.3 Installer had support for RAID. This has been taken out of 1.4 Can this again be implemented into v1.5?" gerard 201 Installer should provide way to enter boot delay Installer 8.0-ALPHA 8.0 System Enhancement closed 2009-12-22T06:39:59-08:00 2010-07-07T13:32:40-07:00 "probably near ""install PC-BSD boot manahger"" insert one more field: Enter boot delay (1-10): ________________ " yerenkow 300 Better not show non-created partitions Installer 8.0-BETA 8.1 System Defect kris closed 2010-05-18T01:06:31-07:00 2010-07-08T05:21:50-07:00 "If I have empty da0; I created da0s1; At slices wizard, I see da0s1 and da0s2 (which is similar to 'create new partition for full size, and create there slices') At partition wizard there is now possibility to create partitions. User can now create any count and flavors of partitions. How about remove there da0s2 (un-created) from slices wizard, and properly explain to user, if he want to create slice, he need to create partition in the first time;" yerenkow 369 "kbdcontrol: keymap file ""us"" not found" Installer 8.2 System Defect kris closed 2011-03-20T11:45:23-07:00 2012-01-26T13:06:27-08:00 "Here is the info (the part of the boot messages): {{{ Starting bsdstats. Configuring syscons: keymap kbdcontrol: keymap file ""us"" not found : No such file or directory usage: kbdcontrol [-dFKix] [-A name] [-a name] [-b duration.pitch | [quiet.]belltype] [-r delay.repeat | speed] [-l mapfile] [-f # string] [-k device] [-L mapfile] blanktime . Starting sshd. }}} So, may be it's harmless. I've selected another language (than the default English) during the installation. And here is the line in rc.conf: {{{ keymap=""us U.S..iso"" }}}" vans 430 Installer should show download speed Installer 9.0-BETA3 9.1 System Defect kris closed 2011-12-03T00:10:51-08:00 2012-07-03T10:08:59-07:00 It was hard to tell when the installer stalled vs when the download speed just fell to an imperceptible rate. The installer should show the download rate of the files it is downloading to help alleviate this problem. eadler 363 Language selection should be in native language Installer 8.1 9.1 System Enhancement kris closed 2011-02-13T06:08:51-08:00 2012-09-04T07:44:56-07:00 "It would be nice if the language selection didn't require an understanding of English in order to be used. For example French should be ""Français"", not ""French""." brucec 60 Timezone for Melbourne, Australia incorrect in installer Installer 1.4 System Defect closed 2007-10-02T16:28:32-07:00 2007-10-03T09:16:06-07:00 During the installation, the timezone selection screen incorrectly shows the timezone for Melbourne, Australia as +11, when it should be +10. It is only +11 during summer daylight savings time. pbirch 653 PC-BSD 9.0 installer problem with the keyboard NUM (numerical keyboard) Installer 9.0-RELEASE System Defect kris closed 2012-08-29T19:59:17-07:00 2012-09-04T07:31:21-07:00 "At the beginning of the installation process of PC-BSD 9.0, my keyboard's NUM is ON, but when I need to enter numbers for partitioning the drive, I noticed that the NUM (numerical keyboard) is in fact desactivated. I had to press the NUM key to switch it on. Not really a problem for a skilled user, but can be a nightmare for a non-expert user." Boug 293 Auto-select keyboard language based on country Installer 8.0 System Enhancement kris closed 2010-04-24T01:32:11-07:00 2010-06-28T09:19:26-07:00 It would be nice if the keyboard language was automatically selected based on the country from the previous screen. It currently always defaults to en-us. brucec 350 [i18n] [installer] SysInstaller French translation fixes Installer 8.1 System Enhancement kris closed 2010-10-01T10:05:54-07:00 2012-09-04T08:07:10-07:00 "Some fixes for pcbsd/trunk/SysInstaller/i18n/SysInstaller_fr.ts: i. the welcome screen prints " instead ' ii. in French, a space is required before :, !, ... and ? iii. some sentences were too long and so no fully printed by the installer iv. other general improvement" dereckson 111 Missing Italian translation strings in installer Installer 1.4.1 1.5 System Defect closed 2008-03-11T12:44:46-07:00 2008-03-11T13:11:13-07:00 "Not all of the strings are translated when chosing the Italian language during install, e.g. In the partitions screen, for the checkbox {{{Use encrypted swap space}}} no text at all is displayed." pheet 190 sysinstaller - extra check-box for auto-login when installation type is FreeBSD Installer 8.0-ALPHA 8.0 System Defect closed 2009-12-14T11:58:11-08:00 2009-12-14T12:25:17-08:00 "SysInstaller on the ""User Creation"" stage have check-box options ""Auto-login User"" This settings works fine for PC-BSD installation mode, but does not work in FreeBSD mode. Ive think this options must be inactive or hidden for FreeBSD mode ?" olevole 330 Green tint on screen during installation Installer 8.1-RC1 8.1 System Defect kris closed 2010-07-16T15:00:02-07:00 2012-01-26T13:21:27-08:00 When the installer loads the screen is tinted green and is difficult to read. The exception to this is the mouse pointer, which is white and not tinted. As I have troubles completing installation (see ticket #329) I am not sure if this tint will extend to the installed GUI. I have tested this system using OpenBSD and the colour is fine. joehache 353 GUI Installer Missing Text for German Installer 8.2 System Defect kris closed 2010-12-24T18:09:46-08:00 2011-01-03T10:15:55-08:00 For PC-BSD 8.1 and 8.2 Beta 1, the welcome message at the beginning of the installation is not present in the German language. The space is blank and white. All other languages render perfectly. I have tested this on two very different computers with the same result. The rest of the installer and KDE have perfect German. ashumaloz 287 destination directory for backups Life Preserver 8.0 8.0 System Enhancement closed 2010-03-19T09:25:50-07:00 2010-04-02T10:42:17-07:00 "It would be very nice if we could specify a destination directory on the rsync server for our backups instead of Life Preserver just dropping them in a user's home directory of that server. i.e. I have a couple of disks that are mirrored on a FreeNAS box that I already backup my servers to and would prefer to be able to set a directory from within Life Preserver to save my files in for my PC-BSD box so that all my backups are in the same place. Surely it shouldn't be that hard to update the script and GUI front-end to make this possible. Thank you for your time and a great product!" bjs 148 Version 7 vmware virtual machine won't unzip on Ubuntu Misc 7.0-DEV System Defect kris closed 2008-10-14T13:16:18-07:00 2008-10-20T11:13:18-07:00 The downloaded .zip file for the Version 7 virtual machine can't be unzipped on Ubuntu Hardy Heron as it is in an unsupported (by unzip) format. dlp@… 343 Screen saver crashes computer Misc 8.1 System Defect closed 2010-08-13T03:06:19-07:00 2012-01-26T11:52:10-08:00 "This is the second time it happened: The screen saver (standard configuration in a fairly new 8.1 installation) has made the system completely unresponsive - neither keyboard nor mouse action could make do anything. The last entry in the Xorg.log reads [mi] EQ overflowing. The server is probably stuck in an infinite loop. The complete log is attached (from a Lenovo ThinkPad x60s). " SolarCatcher 395 mount_ntfs doesn't work/mount Misc 9.0-BETA1 9.0 System Defect closed 2011-09-30T13:21:46-07:00 2011-10-03T12:37:45-07:00 "I've tried to access ntfs partition in Dolphin/PCManFM. It just doesn't mount showing no errors/warnings. In root shell: {{{ # mount_ntfs kldload: can't load /usr/local/modules/fuse.ko: No such file or directory /sbin/mount_ntfs: ntfs-3g: not found }}} P.S. I've tried mounting using mount_ntfs.orig - the partition mount successfully." vans 403 Wine don't register to run *.exe files Misc 9.0-BETA3 PBI Packaging Bug closed 2011-10-07T15:09:21-07:00 2012-03-28T05:51:38-07:00 "I've installed Wine using App Cafe. If I left click .exe file, I have Archive Manager being started and it informs that 7-Zip can't open archive (of course, it is an .exe file:)) ). If i right-click .exe file, there is no submenus for the ""Open with"", just ""Open with..."" item itself." vans 95 keyboard layout doesn't change in firefox Misc 1.4.1 System Defect closed 2008-02-14T00:31:47-08:00 2008-02-20T07:30:27-08:00 keyboard layout doesn't change in firefox, although it changes in all other applications of the system. I need russian. To change layout I use kxkb. And it doesn't matter whether it is configured to change globally or on a window basis guzenkov 101 Mouse pointer blocked if mouse moves slowly. Misc 1.4.1 System Defect closed 2008-02-24T05:57:55-08:00 2008-04-11T10:43:55-07:00 "Good day. I'd like to report a strange behavior of my mouse on PC-BSD. My mouse is a Trust 350L Cradle Optical Mouse (NOT wireless). It works perfectly under many other OS I have on my machine (Vista, Ubuntu, XP Pro) but under PC-BSD as I try to move the mouse SLOWLY, the arrow on the desktop simply doesn't move. The arrow finally moves only when I move the mouse faster. It's a great problem when I have to use Gimp to draw with precision (as in many other things I usually do under PCBSD). Can you tell me something about? Many thanks." GloomMan 401 Skype doesn't work Misc 9.0-BETA3 System Defect closed 2011-10-07T12:28:05-07:00 2012-01-09T09:50:38-08:00 "Skype fails to start {{{ ~> skype ERROR: ld.so: object '/usr/lib/libv4l/v4l2convert.so' from LD_PRELOAD cannot be preloaded: ignored. /usr/pbi/skype-i386/share/skype/skype: error while loading shared libraries: /usr/pbi/skype-i386/lib/libSM.so.6: ELF file OS ABI invalid }}} Don't know is it a PBI packaging bug or a system one." vans 491 wrong md5sum for USB-BootOnly-64-Bit Misc 9.0-RELEASE System Defect closed 2012-01-23T20:28:17-08:00 2012-01-24T08:06:07-08:00 The md5sum for PCBSD9.0-x64-USB-bootonly.img.bz2 is b7526c4179b94ac1eb7a423bc73eef29 and the one on the site is 540ce4894f2eeb3738738af4a3243e5d there is a forum post about the problem at [http://forums.pcbsd.org/showthread.php?p=92779#post92779] cpatrick08 498 web browser goes back one page Misc 9.0-RELEASE System Defect closed 2012-01-26T15:05:52-08:00 2012-01-27T06:42:42-08:00 when i use Firefox or chromium my web browser goes back to the page randomly i am running pcbsd 9.0 kde 4.7.3 cpatrick08 285 ports/www/w3m: disabled M17N(multilingualization) option. Misc 8.0 System Enhancement closed 2010-03-16T06:42:41-07:00 2012-04-24T12:37:53-07:00 "w3m (ports/www/w3m) is text based web browser/pager. w3m is preferred non-Latin language user. It has a multilingualization(m17n) support. w3m merged into PC-BSD 8.0(ports/textproc/xmlto depend on w3m). But, w3m on PC-BSD lack of m17n option. w3m cannot display non-Latin text. Solution:[[BR]] Add this configuration to pcbsd/trunk/build-files/conf/pcbsd-make.conf {{{ .if ${.CURDIR} == ${PORTSDIR}/www/w3m M17N=YES .endif }}} " yamajun 1 XOrg GUI Misc 1.5 System Enhancement somebody closed 2007-08-13T10:16:41-07:00 2007-08-13T10:34:10-07:00 Produce a GUI tool to provide configuration of the XOrg windowing system. tim 3 VPN GUI Misc 1.5 System Enhancement somebody closed 2007-08-13T10:19:16-07:00 2012-09-25T10:18:38-07:00 "Create GUI VPN configuration tool. Alternatively, attempt to fix KDE's tool." tim 145 mirrors.secsup.org download failure Misc 7.0 System Defect closed 2008-10-09T22:42:06-07:00 2009-06-13T12:19:54-07:00 "The files on the mirrors.secsup.org (This corresponds to the USA Ashburn,VA site download site) for the PC-BSD 7 release are not available (as of 10/10/08 1AM EST) I think someone needs to either contact the mirrors.secsup.org admins, or adjust mirror release processes as needed to get these distributions properly setup. All files in the /pub/PC-BSD/7/i386 directory fail to download from mirrors.secsup.org with the following error: Command line FTP error message: 550-This file has been uploaded by an anonymous user. It has not 550 yet been approved for downloading by the site administrators. I have tested this on all three IPv4 addresses for these servers with identical results. Using Firefox, I get a slightly different 550 error, but still fail. Firefox FTP Download Failure error message example: 550 Can't change directory to /pub/PC-BSD/7/i386/PCBSD7-86-CD1.iso: Not a directory Name: mirrors.secsup.org Address: 208.209.50.18 Name: mirrors.secsup.org Address: 208.209.50.16 Name: mirrors.secsup.org Address: 208.209.50.19 Let me know if you need additional information, or a re-test. I will be glad to assist." dhorn2000@… 8 Integrate FreeBSD 7.0 Misc 7.0 System Enhancement closed 2007-08-13T10:29:26-07:00 2008-05-05T09:43:41-07:00 Integrate FreeBSD 7.0 into the base system. tim 37 Improved control panel Misc 1.3.4 7.0 System Enhancement closed 2007-09-14T05:47:36-07:00 2008-09-04T11:48:13-07:00 In case KDE4.0 lacks clean/intuitive control panel, create one like Ubuntu and OpenSUSE or Kubuntu ( [http://www.kubuntu.org/docs/kquickguide/C/ch03s07.html]) gerard 156 Olympus C-370Z not detected or automounted Misc 7.0.1 7.1 System Defect kris closed 2008-10-23T04:39:47-07:00 2009-06-13T12:36:51-07:00 "The Olympus C-370Z camera is not detected or mounted on PC-BSD. " udragon 5 Backup / Restore GUI Misc 7.1 System Enhancement cneirab closed 2007-08-13T10:27:21-07:00 2009-06-13T12:03:18-07:00 Create GUI tool to allow both the backing up, and restoration of user & system files. tim 6 Fix KDE samba/NFS sharing Misc 7.1 System Enhancement florian closed 2007-08-13T10:28:17-07:00 2010-07-07T12:18:10-07:00 Fix KDE's support for allowing easy addition of both NFS & Samba shares to a PC-BSD system. tim 158 Translations unuseable if they are not completed Misc 7.0.1 7.1 System Enhancement closed 2008-11-05T12:05:35-08:00 2010-07-07T12:30:55-07:00 "There are very few languages that have 100% of strings translated. I use very often various open source software that has been translated into my language (Slovak). When there is a string that was not used in previous version and it is not yet translated an English equivalent is used. This is not the case with PC-BSD. When there is an untranslated string there is simply an empty space instead. Some time ago I tried to install PC-BSD in Slovak and I failed miserably, because with missing strings you simply can not continue. This has prompted me to start translating and I have translated more than 50% of strings for Slovak language. I suggest following solution. Immediately before a new version of PC-BSD is built you should ""merge"" translated strings with the original english ones. Instead of an empty string the english string should be used. " stasike 266 Netlink BCM57780 support & Brightness Problem Misc 8.0-RC2 8.0 System Defect closed 2010-02-22T12:59:26-08:00 2010-07-08T06:40:55-07:00 "I am using PC-BSD 8.0 RC2 i386 on acer aspire 4740G,the installation goes fine but after second reboot,PC-BSD seem to adjust the screen brightness itself to lower settings,nearly dark,how to reset back the brightness level back to default setting?i only found the setting for gamma,about the wired ethernet,the devices(Netlink BCM57780) is not detected,as per-advice from someone in freebsd forum to enable the device miibus and device bge, i was already checked on kernel config it's already set on,while the if_bg_load on loader config i already put it,after reboot the ethernet devices still not detected.After some research i found that the support for Netlink BCM57780 later on added on kernel by the end of december : http://www.gitorious.org/freebsd/freebsd/commit/a5d58b062c6ac89377d73fdd801badacdca920e9?diffmode=sidebyside , which mean might added only for 9.0?is there anyway to get the patch manually and applied to current-8.0 kernel? My system spec : http://www.smolts.org/client/show/pub_4167332f-c947-41b9-9874-708b61131f5f" solaris 400 flashplugin doesn't work in opera, konqueror Misc 9.0-BETA3 9.0 System Defect closed 2011-10-07T12:24:28-07:00 2011-10-08T01:53:39-07:00 Flashplugin doesn't work in Opera and Konqueror, and in the Firefox and Chromium it works just fine. In opera, flashplugin is not listed in opera:plugins page. vans 578 mouse pointer and system stops and only starts when key is pressed (shift) Misc 9.0-RELEASE 9.0 System Defect kris closed 2012-02-19T16:44:09-08:00 2012-07-10T12:12:36-07:00 "Mouse pointer stops after a time, and the system also stops. CD drive pauses reading even if there is a component installing. I have to press a button, for example shift, to start it again. After that, all mouse movements are done, that were made before. But mouse movement is chipped (mouse image is correct). Keyboard input is also stopped, when i am at the console CTRL+SHIFT+F3. I have to go back to the KDE screen with CTRL+SHIFT+F9. System start to work again without problems. But after an idle time (5-10 minutes), it starts all over again. Sometimes it freezes forever... Fresh install. I installed it twice, and did the same. Maybe it is an NVIDIA driver problem. (?) (a have another machine on which the 64 bit version works without errors) " ntamas 679 PC-BSD 9.1 RC2 Produces No Sound Lenovo T420 Misc 9.1-RC2 9.1 System Defect closed 2012-10-30T12:04:50-07:00 2012-11-16T11:24:24-08:00 "Fresh install results in no sound ... speakers or headphones. Tried various sources including a straight-up mp3 file in kplayer. Hardware compatibility diagnostic on graphical installer showed: Detected hardware devices: Video driver: (intel)[[BR]] Video resolution: (1366x768)[[BR]] Ethernet device: (em0)[[BR]] Wifi device: (iwn0)[[BR]] Sound device: (pcm4) Live Ubuntu 12.04 LTS shows that hardware is working correctly. My machine: Lenovo T420, 4GB RAM, 1TB hard drive. Not sure of what component to assign to ... so used Misc." rhdinah 303 "KDE - KDE Info Center - Crashes when selecting ""USB Devices""" Misc 8.0 PBI Packaging Bug closed 2010-05-24T11:31:05-07:00 2010-07-07T08:02:22-07:00 "I tried opening the KDE Info Center menu and everything was fine until I got a signal 11 when selecting the ""USB Devices"" option. This is what was in the crash notifier: ""Application: KDE Info Center (kdeinit4), signal: Segmentation fault: 11"" I hope this information helps! :) Thank you! :D FreeBSD pcbsd-5335 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #4: Thu Jan 7 09:20:42 PST 2010 i386" Gogeden 661 kolourpaint oxygen theme error Misc 9.0-RELEASE PBI Packaging Bug closed 2012-09-23T01:54:29-07:00 2012-10-02T03:28:08-07:00 "Good day, I set ""kolourpaint"" as PBI package. When I run it, a message appears: {{{ [zentarim@hal /usr/home/zentarim]$ kolourpaint kolourpaint(6906)/kdeui (KIconLoader): Error: standard icon theme ""oxygen"" not found! }}} and actions incons will not be displayed. " zentarim 22 http://bugs.pcbsd.org/ does not exist Misc System Defect closed 2007-09-06T22:39:09-07:00 2007-09-07T01:32:25-07:00 "On PC-BSD homepage, the 'Support'->'Bugs' link in the upper menu leads to non-existent address (http://bugs.pcbsd.org/). I'm new here, and I thought the bug database was offline for a day or two. Should point to http://trac.pcbsd.org/ of course. Easy fix. ;-D" kad77 175 PC-BSD guide in ODT format do not include images Misc 7-BETA1 System Defect closed 2009-08-28T11:40:24-07:00 2009-10-08T08:41:15-07:00 "file downloaded from http://docs.pcbsd.org/guide/index_single.odt do not include images, just empty space with URL or name form example on first page file:///tmp/desktop files/PC-BSD Guide/images/logo_pc-bsd-larg" navratil 208 muCommander PBI stop working in 8.0 Misc 8.0-ALPHA System Defect closed 2009-12-31T11:18:00-08:00 2010-01-16T11:59:50-08:00 "java: error: no suitable JavaVMs found " yerenkow 349 Removing virtual desktops changes the desktop altogether. Misc 8.1 System Defect closed 2010-09-01T17:00:02-07:00 2012-01-26T12:49:48-08:00 When I remove at least one of the virtual desktops, the desktop background and all of the icons disappears off of the screen leaving only a plain blue background. fitzlt 485 Cannot eject CD from file manager Misc 9.0-RELEASE System Defect joshms closed 2012-01-20T05:57:00-08:00 2012-07-26T08:09:33-07:00 "This is really on 9.0 Release, but that option isn't available in the ticket system. If cd was in the drive when the system boots, can't eject. If cd put in after user logs in, user can eject it. Click on file manager, click on the PC-BSD install media that was still in the computer after installation. Click on the little eject icon, or right click and select eject. Get the following error: ""Cannot eject volume. There was an error ejecting the volume or drive. org.freedesktop.Hal.Device.Volume.UnknownFailure: Cannot get volume object"". File manager then closes behind the error popup. From the command line, the mount command does not show the volume as mounted. I can use the eject button on the drive to eject it." bitgeist 36 Make KDE theme apply to GTK / Wine Misc 1.3.4 System Enhancement closed 2007-09-14T05:45:11-07:00 2008-04-11T10:29:19-07:00 Make the KDE theme apply automatically to GTK / Wine gerard 18 Improve sound detection script Misc 1.3.4 1.5 System Enhancement cneirab closed 2007-09-05T10:47:57-07:00 2008-01-02T19:00:35-08:00 "The current sound-detection script is rather poor at detecting newer cards and loading the right driver (Instead of just loading snd_driver) We'll need to possibly revamp this a bit for 1.5 / 2.0. " kris 35 Impove look-n-feel Misc 1.3.4 1.5 System Enhancement closed 2007-09-14T05:43:43-07:00 2008-02-21T13:12:07-08:00 Improve consistency of bootsplash, kdm theme and kde splash gerard 46 Improve bootup time Misc 1.3.4 1.5 System Enhancement closed 2007-09-14T06:41:13-07:00 2008-02-21T13:05:45-08:00 gerard 113 Quick guide is not complete Misc 1.4.1 7.0 System Defect closed 2008-03-16T02:48:52-07:00 2008-09-04T12:50:42-07:00 There missing some .htm files in the PC-BSD quickguide on fresh installed 1.5! kafkaesk 172 Python (and possible Ruby) plasmoids can not run Misc 8.0 7.1.1 System Defect closed 2009-08-12T06:16:38-07:00 2010-07-07T08:30:51-07:00 "When I download plasmoid and try to add it to desktop I have error ""can't create python engine for ..."". Possible need kdebindings4-python." yurkis 415 Can't mount ntfs in Nautilus / pcman fm Misc 9.0-BETA3 9.0 System Defect kenmoore closed 2011-11-02T07:33:33-07:00 2012-06-26T10:54:13-07:00 "If I click ntfs partition in Nautilus or pcman fm nothing happen. If I do so in Dolphin - ntfs partition mounts. System version is 9.0-RC1." vans 380 Load non-essential modules later Misc 9.0-BETA1 9.0 System Enhancement closed 2011-09-05T17:29:43-07:00 2011-09-06T09:04:12-07:00 "Loading modules in FreeBSD via loader(8) is extremely slow. One of the lesser noted features in 9.x was a minor infrastructure piece introduced by dougb@ where non-essential modules (i.e. not required for system boot in mountroot) could be loaded after mountroot was loaded. This patch moves all non-essential (network/non-essential device drivers, non-critical filesystems, and non-essential system call) modules from /boot/loader.conf in to /etc/rc.conf ." gcooper 605 Minecraft 1.0 cannot be updated Misc 9.0-RELEASE PBI Packaging Bug kenmoore closed 2012-05-11T21:51:56-07:00 2012-06-25T12:33:31-07:00 "~/.minecraft/bin/lwjgl.jar and ~/.minecraft/bin/lwjgl_util.jar both give access denied errors when attempting to update. chmod 666 seemed to do the trick. After the update is complete, ~/.minecraft/.BSDlwjgl must be deleted and the program must be restarted (as stated when the program initially loads). This might be difficult or annoying for some desktop users." paul 23 """All tickets by milestone"" on trac errors out" Misc System Defect closed 2007-09-07T18:54:56-07:00 2007-09-08T03:20:14-07:00 "Hi, this is Trac related: I meant to close off ticket #20 with this reply to Kris (thanks!), but Trac will not let me go to: http://trac.pcbsd.org/report/6 " kad77 68 The Matrix screensaver is not in the 1.4 release, but it was in the BETA, and 1.3 Misc 1.4 System Defect closed 2007-10-26T11:39:46-07:00 2007-10-27T09:21:22-07:00 The Matrix screen saver is not in the 1.4 release, but it was in the BETA, and 1.3 vintagevolks2000 173 subversion context menu exist but not working (cosmetic bug) Misc 7.1 System Defect closed 2009-08-14T02:09:28-07:00 2010-07-07T12:37:22-07:00 Context menu has subversion submenu that is not working. yurkis 712 missing pkg: ksnapshot not installed by default Misc 9.1-RELEASE System Defect closed 2013-03-09T15:17:35-08:00 2013-03-14T14:44:57-07:00 "but is should, at least because s/t the KDE developers want screenshots appended to bug reports. Don't know which component fits best, thus I choose ""Misc""" mjollnirpaul 442 Bug tracker should be linked to under 'community' Misc 8.1 System Enhancement closed 2011-12-20T20:10:03-08:00 2012-09-04T08:04:22-07:00 "I, and I imagine many others would expect the ""bug tracking"" system to be under ""community"" instead of ""pcbsd"". At a minimum there should be a small link under community as well linking to trac.pcbsd.org." eadler 708 9.1 is out but TRAC still makes us file under 'Version' 9.1-RC3 Misc 9.1-RC3 9.1 System Defect closed 2013-02-22T00:41:00-08:00 2013-02-25T15:27:17-08:00 See summary line. Shouldn't TRAC have a Version 9.1 option now? gja 178 Changes with wireless network Network Manager 7-BETA1 8.0 System Defect closed 2009-09-01T13:40:28-07:00 2010-01-16T11:42:21-08:00 "In 8.0 introduced changes with wireless network, for multi-ssid New net manager should deal with this. Something like here: http://forums.freebsd.org/archive/index.php/t-5530.html" yerenkow 197 Network Tray crashed after system idle a while Network Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-12-21T14:32:11-08:00 2010-01-16T11:46:15-08:00 Confirm here with wireless networking in pcbsd-alpha.15.12.09-x32 yerenkow 128 System crash/restart during fast download over Wifi Network Manager 1.4.1 System Defect closed 2008-05-06T03:45:07-07:00 2009-06-13T12:35:57-07:00 While rying to download the upgrade patch (1.4.1 to 1.5) PC-BSD freezes and then restarts couple of seconds into the download. My wired speed is 1.4 Mb/Sec. WiFi is Netopia USB Pen. I Know it's about 1.4.1, but thought you might like to know. Will try again after the upgrade (downloading the patch on my Mac). usharf 136 Network manager fails Network Manager 7.0-DEV System Defect closed 2008-09-30T14:22:54-07:00 2008-10-15T19:28:34-07:00 "7.0 final release Cannot reconfigure the settings, like DNS, after install as you cannot apply the settings. Save does not save the settings either. Reverts back to original installed settings. After trying to change the settings several times, the network manager will no longer start and nothing else seems to start. Restart of KDE required." ka0zoz 150 DHCP client - networking problem Network Manager 7-BETA1 System Defect closed 2008-10-17T02:13:54-07:00 2009-06-13T15:13:02-07:00 "The DHCP client and basic networking associated with it does not operate properly. I have installed PCBSD 7 under VirtualBox, which provides a default DHCP server for networking. This operates correctly under other OS (Linux/Windows). The DHCP client and associated GUI networking apps do not seem to provide proper operation to detect and bring the network up. Possible solution: replace/upgrade/patch DHCP client, ?" anonymous 468 WPA conf file syntax error Network Manager 9.0-BETA3 System Defect kris closed 2012-01-10T02:09:21-08:00 2012-09-04T07:58:48-07:00 "Can't get wifi working without hands. Way to reproduce: 1) Have AP with WEP 2) When entering password, tick ""show symbols"" and ""open text"" 3) Enter 32-symbols hex passkey; 4) passkey saved with quotes => no wifi :) WiFi manager should at least check, if entered key is hex/text and propose switch setting respectedly, like ""Seems as hex key, are you sure it's open text?"" Currently, it silently failing." yerenkow 607 Unable to enter IP manually Network Manager 9-SNAPSHOT System Defect closed 2012-05-31T06:28:38-07:00 2012-05-31T08:18:15-07:00 "When you create network card (wlanX), you can save all with ticked ""use DHCP"". After that, when you edit this connection, when you un-tick ""DHCP"" the inputs for inet/netmask still are greyed/disabled." yerenkow 630 Side-effects of proxy settings Network Manager 9.1-BETA1 System Defect closed 2012-07-26T23:57:54-07:00 2012-07-27T06:49:54-07:00 "I have to set a proxy with user authentication on my workstation. The proxy settings are done via the PC-BSD Network Manager. Unfortunately this has some side-effects: - When starting the warden or a root terminal and check the ""Remember password"" checkbox a popup shows: ""Failed to run xterm as user root. Failed to communicate with gksu-run-helper. Received: basic:*:username:password: No match. While expexting: gksu: waiting"" - When starting a terminal I've this message: ""basic:*:username:password: No match."". I'm using tcsh as shell. Although setting the proxy settings AppCafe doesn't work. Deleting the index and restarting pbid doesn't help and the pbid.log only shows the ""Started pbid"" line." beat 663 UK wireless channel 12 not detected by Network manager Network Manager 9.1-RC1 System Defect kris closed 2012-10-02T04:43:59-07:00 2012-11-03T22:58:06-07:00 "In the United Kingdom, routers can broadcast on channels 12 and 13. However in the Network Manager the country is automatically set to US and will not see the SSID of my router. I have tried to use ifconfig to change the country setting to GB (Great Britain) however a ""Device Busy"" reply is received. Btw thanks for the addition of ""hidden network"" button on the Network Manager!" Dante77 41 Windows WIFI drivers GUI Network Manager 8.0-ALPHA System Enhancement adrian closed 2007-09-14T05:56:10-07:00 2010-07-08T05:36:29-07:00 Create GUI for using Windows WIFI drivers (Project Evil) gerard 11 Fix the bug [622] fixes properly Network Manager 1.4-DEV / 1.4-BETA 1.5 System Enhancement tim closed 2007-08-24T09:35:38-07:00 2007-10-11T06:34:53-07:00 "Revision [622] hacked a fix for bad characters in hostnames that didn't require an interface change, since the interface was frozen. Implement a better fix." tim 47 Allow scan_ssid to be set if AP isn't broadcasting its ssid. Network Manager 1.4 1.5 System Enhancement closed 2007-09-17T03:19:57-07:00 2008-03-04T10:23:57-08:00 "If the AP isn't broadcasting its ssid, scan_ssid=1 needs to be added to /etc/wpa_supplicant.conf in order for the association to succeed. Thanks to 'cast off' for pointing this out." tim 117 Add roaming support to wifi tool Network Manager 1.4.1 7.0 System Enhancement tim closed 2008-03-21T17:12:03-07:00 2008-10-20T11:15:18-07:00 "My idea is adding a profile manager to wifi tool, this should make possible to add more than one wireless network! E.g: - home: ssid=""my_home_wlan"" psk""mypsk123"" - work: ssid=""office_wlan"" psk=""my office wlan"" " kafkaesk 167 Not proper bahavior of network status in systray Network Manager 8.0-ALPHA 8.0 System Defect yerenkow closed 2009-05-10T11:21:04-07:00 2010-07-08T06:22:36-07:00 "I'm using same PC-BSD on two different PCs (external HD) on PC1 I have msk0 interface; on PC2 I have rl0 interface; If I turn on systray icon for rl0 on PC2, after boot on PC1 I couldn't do anything with this icon :) I'm not seeing menu item ""disable systray"" in context menu, and I see no rl0 device in network settings, because there is no such card. " yerenkow 279 Marvell 88E8042 doensn't work with PC-BSD 8.0 Network Manager 8.0 8.0 System Defect closed 2010-03-15T00:33:46-07:00 2010-07-07T12:41:19-07:00 "I have no doubt that this is a bug. pciconf http://pastebin.org/111545 dmesg http://pastebin.org/111546" htl 271 network tray close message Network Manager 8.0-BETA 8.1 System Defect kris closed 2010-02-26T10:16:24-08:00 2010-07-08T05:57:15-07:00 "If you trying to close network-tray, it show popup: Are you sure? ""Escape"" works as ""yes"". Should work as ""No""" yerenkow 272 Key index became -1 instead of 0 Network Manager 8.0 8.1 System Defect kris closed 2010-02-26T10:22:27-08:00 2010-07-08T07:59:21-07:00 "Open network settings for wlan; create new profile, WEP, enter key data, save. It saves as /etc/wpa_supplicant.conf .. keyidx=0 ... start again network manager, edit this wlan, chose profile, press edit, change SSID, DO NOT enter ""configuration"" for WEP-KEY, save. It saves as keyidx=-1 " yerenkow 310 Network Manager drops signal and cannot be restarted Network Manager 8.1-BETA1 8.1 System Defect Any Available closed 2010-06-12T23:02:24-07:00 2010-06-14T08:23:10-07:00 Network Manager sporadically drops WiFi signal and the Network cannot be restarted but everything works again after a system restart draconian 356 Bug with latest RC (8.2 RC) Network Manager 8.1 8.2 PBI Packaging Bug Jon Valentine closed 2011-01-12T21:54:35-08:00 2012-01-26T12:39:22-08:00 "After updating and rebooting I could not connect to wired eth0. When clicking the Firefox icon nothing happened. I looked for a network manager to try to set up my connections but could find none. I could not set up either a wired or wireless network. Can't an applet be put on the tool bar as in most KDE distributions for Network Manager? Also Frozen Bubble game listed in Package manager has no download link. This also accurred in 8.1. I would like to see PC/BSD made easier to get connected and be more user friendly as I really like the distro but am afraid to make any permanent install of it at this time. Woulkd some one be so kind as to assist me on these matters? THANK YOU for your time and consideration." harleyrider1958 364 PPPoE doesn't work Network Manager 8.2 System Defect closed 2011-02-18T00:32:15-08:00 2012-01-26T12:40:42-08:00 "PC-BSD 8.2 RC2. I have properly working ethernet interface. I've set up pppoe connection in usual way: on the tab entered login/pass, selected interface, service name leaved empty. So, even after reboot there is no connection. These were abstract words. So, the problem seems to be in that no profile name is given and in ppp.conf there is line (number 5) with only a "":"" (without quotes). So, if I comment these line (and next lines become 'default' profile) or I give some name to the profile ('inet' for example) and set this profile in rc.conf in ppp_profiles then all works ok. Sorry that no example line from files given, I have no access to that PC. May be someone can test it, or I'll try to provide some more info a few days later." vans 12 Network Manager fix (svn revison 622) Network Manager 1.4-DEV / 1.4-BETA System Defect Tim closed 2007-08-24T11:07:10-07:00 2007-08-24T17:03:47-07:00 "Relating SVN Revision 622 Author: tim Date: 2007-08-24 09:22:49 -0700 (Fri, 24 Aug 2007) New Revision: 622 Modified: pcbsd/trunk/NetworkManager/NetworkManager.pro pcbsd/trunk/NetworkManager/networkman.ui pcbsd/trunk/NetworkManager/networkman.ui.h Log: Don't allow spaces in hostnames. TODO: Fix this properly once we're allowed to change interfaces again, post 1.4-RELEASE" gerard 62 Network Adapter Settings Network Manager 1.4 System Defect closed 2007-10-05T03:29:37-07:00 2007-10-05T09:54:28-07:00 "When disabling the Ethernet network adapter and hitting Apply, the apply button does not blank out.. However when enabling (removing the tick from the checkbox) and hitting apply the apply button blanks out.." corza 91 wlan ssid can't have space characters Network Manager 1.4.1 System Defect closed 2008-02-03T15:54:52-08:00 2008-02-21T07:41:53-08:00 "Example ssid: My WLAN The network manager shows ""My"" only, thus selecting ""My"" doesn't work. Also manually typing ""My WLAN"" in the network manager results in a bad configuration, because in the /etc/rc.conf the string is not put into quotation marks. But ifconfig is able to connect to my wlan when quotation marks are being used." thorstenhirsch 365 Port brcm80211 driver from Linux to PC-BSD Network Manager 9.0-RELEASE System Enhancement kris closed 2011-02-28T14:09:39-08:00 2012-09-04T07:51:55-07:00 "In September 2010, Broadcom released a full opensource version under BSD licence of their driver for part of their WLAN hardware (BCM43224, BCM43225, BCM4313 (PCIe NIC)). That would be so nice if this could be added to PC-BSD. For more information, see : - http://thread.gmane.org/gmane.linux.kernel.wireless.general/55418 - http://wireless.kernel.org/en/users/Drivers/brcm80211" studer 31 Add BSSID support to WiFi tool Network Manager 1.4-DEV / 1.4-BETA 1.5 System Enhancement kris closed 2007-09-13T10:14:32-07:00 2008-02-21T12:31:53-08:00 Setup the WiFi tool to use bssid keys in addition to the normal ssid string. kris 182 Signal strength are negative. Why???? Network Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-09-08T00:55:52-07:00 2010-07-07T08:31:45-07:00 "How can be strength of signal be negative? :) How about normalize it, to positive numbers, for ecample from 0 to 10, or from 0 to 100. But not from -100 to 0 - this crazy." yerenkow 181 Scan issue Network Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-09-08T00:54:26-07:00 2010-07-07T13:30:30-07:00 "When I adding new wireless network, I need to find SSID. I click ""Scan"" and new window popped up. But nothing happens, until I click ""Rescan"" - this not user-friendly. Should invoke rescan automatically just right after open window with scans. " yerenkow 465 EasyPBI can't build created PBIs. PBI Creator 9.0-BETA3 PBI Packaging Bug closed 2012-01-09T09:24:11-08:00 2012-03-28T05:53:06-07:00 "After selecting module, i click ""build PBI"" and see following error: {{{ Fetching FreeBSD chroot environment... This may take a while... fetch: ftp://mirrors.isc.org/pub/pcbsd//i386/netinstall/fbsd-release.tbz: File unavailable (e.g., file not found, no access) fetch: ftp://mirrors.isc.org/pub/pcbsd//i386/netinstall/fbsd-release.tbz.md5: File unavailable (e.g., file not found, no access) md5: rel.tbz : No such file or directory cat: rel.md5 : No such file or directory pbi_makeport: Error in download data, checksum mismatch.. Please try again later. }}} " arrowdodger 30 MD5 support in the PBI Creator PBI Creator System Enhancement Kris closed 2007-09-12T05:59:22-07:00 2008-04-11T10:39:31-07:00 "Several people have suggested to use digital signature and integrity check for PBIs to make sure PBIs come from pbidir for instance. The public key in this case would be hosted on pbidir. PBI Creator would have to import both keys to build the PBI. Other PBI web sites or software vendors could host their own key on their own web site the same way." gerard 96 Show different menu items per user (e.g kids) PBI Creator 1.4.1 System Enhancement closed 2008-02-18T04:20:39-08:00 2010-07-07T12:27:16-07:00 "it might be useful to have an extra feature in the PBI installer which lets you choose which accounts can see certain PBI menu & desktop links. For instance if you install the GCompris PBI (when available) for your son/daughter, you may not want to see the GCompris links on your own desktop/start menu (clutter if you don't use it), but have it only shown on the desktop/start menu of your son's/daughter's account. This would be especially useful where parents and kids share one computer. One step further: how about the root being able to set who can see which menu items? Little 6 year old son who's only interested in kids programs and games doesn't need to see the PC-BSD Settings or Utilities menu. I know, all advanced features are password protected, but little son may not need to see the whole menu - KISS for them." gerard 207 Extra new line in PBI install PBI Creator 8.0-ALPHA 8.0 System Defect kris closed 2009-12-30T07:06:36-08:00 2012-01-24T11:57:18-08:00 Seems that all licenses are printed with extra newline, in new 8.0-PBIs yerenkow 55 Ability to remove multiple PBIs in one go PBI Removal Tool 1.3.4 1.5 System Enhancement closed 2007-09-21T15:32:58-07:00 2007-10-10T11:40:32-07:00 "It would be handy to be able to delete multiple PBIs in one go in the PBI removal tool by selecting them with the CTRL key and then clicking ""remove""" gerard 72 openoffice pbi 2.1 removal, not working PBI Removal Tool 1.4 System Defect closed 2007-11-09T09:25:33-08:00 2008-05-05T09:50:34-07:00 openoffice 2.1 pbi does not remove with pbi uninstaller. ka0zoz 376 running git mergetool fails on launching meld PBI System 8.1 PBI Packaging Bug closed 2011-07-19T18:03:56-07:00 2012-01-27T08:31:42-08:00 "Even with git and meld correctly installed, meld fails to launch with the following error: Cannot import: pygtk No module named pygtk Similar to a bug in f14(thanks Netsys): https://bugzilla.redhat.com/show_bug.cgi?id=706783" fridder 462 "Libreoffice crashes when ""Open"" button clicked." PBI System PBI Packaging Bug closed 2012-01-06T04:42:26-08:00 2012-01-20T18:15:47-08:00 "I've installed LO from AppCafe. When i try to open a file from any LO application, it just closes without any error messages, even in stdout/stderr. I think, this have something to do with O's file selector dialog." arrowdodger 644 PBI : lack of metapackages for Desktop Environments (GNOME, KDE, LXDE, Xfce) PBI System 9.0-RELEASE PBI Packaging Bug closed 2012-08-29T17:36:01-07:00 2012-08-30T04:47:34-07:00 "I installed PC-BSD 9.0 x86 with GNOME only. But after install, I wanted to add KDE and others and I could'nt do it simply, because there isn't any metapackage called ""GNOME"", ""KDE"", ""LXDE"" and ""Xfce"". That would be a lot better if users could install other Desktop Environments after install without knowing all the components of each GUI." Boug 13 PBI Directory down PBI System 1.3.4 System Defect closed 2007-08-29T13:43:36-07:00 2007-08-30T01:20:40-07:00 http://www.pbidir.com/ is down anonymous 262 Installing of PBI took longer time PBI System 8.0 System Defect closed 2010-02-19T10:28:41-08:00 2010-05-11T05:01:10-07:00 Great, marking as fixed then nu2pcbsd 461 KDevelop doesn't work. PBI System System Defect closed 2012-01-06T04:37:31-08:00 2012-01-27T09:41:47-08:00 "I've installed KDevelop using AppCafe, but it doesn't work. Shortly after showing splash screen i get a small window telling me that there is an error. I've been able to get that window's title: Could not find KTextEditor::Factory, check your installation. Make sure that KDEDIRS is set properly and that you ran kbuildsycoca4. – KDevelop I've been unable to run kdevelop from konsole to see additional error messages, because kdevelop executable isn't in PATH and i haven't found it." arrowdodger 643 PBI : lack of metapackages for Desktop Environments (GNOME, KDE, LXDE, Xfce) PBI System 9.0-RELEASE System Defect closed 2012-08-29T17:35:37-07:00 2012-08-30T04:49:05-07:00 "I installed PC-BSD 9.0 x86 with GNOME only. But after install, I wanted to add KDE and others and I could'nt do it simply, because there isn't any metapackage called ""GNOME"", ""KDE"", ""LXDE"" and ""Xfce"". That would be a lot better if users could install other Desktop Environments after install without knowing all the components of each GUI." Boug 681 pc-metapkgmanager broken by echos in get_mirror() in /usr/local/share/pcbsd/scripts/functions.sh PBI System 9.1-RC3 System Defect closed 2012-12-02T21:36:12-08:00 2012-12-03T07:16:24-08:00 "pc-metapkgmanager doesn't work because get_mirror() in /usr/local/share/pcbsd/scripts/functions.sh echo's extra messages like ""Getting regional mirror..."" and ""Using mirror: $VAL"" which ends up in $pkgAddMirror variable on line 75 in /usr/local/bin/pc-metapkgmanager. So instead of just the mirror URL $pkgAddMirror becomes the following. {{{ Getting regional mirror... Using mirror: http://mirrors.isc.org/pub/pcbsd http://mirrors.isc.org/pub/pcbsd/9.1-RC3/amd64/netinstall/metapackages/warden/packages/ }}} When it ought to just be ""http://mirrors.isc.org/pub/pcbsd/9.1-RC3/amd64/netinstall/metapackages/warden/packages/"". I was able to work around this by commenting out all echos in get_mirror(). These echos should be removed or redirected to STDERR. It is likely that /usr/local/bin/pc-updatemanager is also affected. This occurred on a fresh install of TrueOS 9.1-RC3 AMD64 Error message: {{{ # /usr/local/bin/pc-metapkgmanager --pkgset warden --chroot /usr/jails/10.1.1.105 add ownCloud Pending Meta-Package changes: 1 ERROR: The pkg location Getting regional mirror... Using mirror: http://mirrors.isc.org/pub/pcbsd http://mirrors.isc.org/pub/pcbsd/9.1-RC3/amd64/netinstall/metapackages/warden/packages/ does not exist! # }}} /usr/local/bin/pc-metapkgmanager: {{{ 72 add_metapkgs() { 73 if [ -z ""$1"" ] ; then exit_err ""No meta-pkg specified!"" ; fi 74 local pkgAddMirror=""$2"" 75 if [ -z ""$pkgAddMirror"" ] ; then pkgAddMirror=`use_default_mirror` ; fi 76 if [ ! -e ""${MPDIR}/${1}/pkg-list"" ] ; then exit_err ""No such meta-pkg: $1"" ; fi 77 _apkg=$1 78 79 MIRRORURL=`parse_url ""$pkgAddMirror""` 80 81 # Figure out the type of location we are installing from 82 echo $MIRRORURL | grep -e '^http://' -e '^ftp://' >/dev/null 2>/dev/null 83 if [ ""$?"" = ""0"" ] ; then 84 loc=""NET"" 85 else 86 if [ ! -d ""${MIRRORURL}"" ] ; then exit_err ""The pkg location $MIRRORURL does not exist!"" ; fi 87 loc=""PATH"" 88 fi }}}" jdmulloy 9 Merge PBI tools & PC-BSD Software tools PBI System 1.4 1.5 System Enhancement Kris Moore closed 2007-08-14T03:08:42-07:00 2008-02-21T13:09:11-08:00 "Feature Request: Can we have the following merged into 1 application (PC-BSD Software Manager): PC-BSD Update PBI Update PBI Remove Components Manager http://forums.pcbsd.org/viewtopic.php?t=9279" gerard 34 Allow PBI script to abort installation PBI System 1.5 System Enhancement closed 2007-09-14T02:28:20-07:00 2008-02-21T12:38:53-08:00 Allow scripts executed within a PBI installation to abort that installation in a clean way, without having to resort to hackish 'killall PBI' type workarounds. tim 351 stray bash-ism in warden installinmate.sh script PBI System 8.1 PBI Packaging Bug closed 2010-11-23T23:29:28-08:00 2010-11-29T08:55:40-08:00 "if [ ""${IFILE:0:1}"" != ""/"" ] then IFILE=""${PWD}/${IFILE}"" fi Should be?: chk=`echo ""${IFILE}"" | cut -c 1-1` if [ ""$chk"" != ""/"" ] then IFILE=""${PWD}/${IFILE}"" fi" embiidae 505 "KDESvn PBI is craching on ""open file"" dialog." PBI System 9.0-RELEASE PBI Packaging Bug closed 2012-02-03T03:20:23-08:00 2012-03-28T10:11:46-07:00 "Steps to reproduce: 1. Click ""Open"". 2. Click on button with folder picture. Error message: {{{ KCrash: Application 'kdesvn' crashing... KCrash: Attempting to start from kdeinit sock_file=/home/arr/.kde4/socket-alore/kdeinit4__0 KCrash: Attempting to start directly KCrash failed to exec(), errno = 2 QKqueueFileSystemWatcherEngine: error during kevent wait: Bad file descriptor }}} Also, look&feel of KDESvn differs from other KDE apps." arrowdodger 397 Error during cleanup of pbi-hashdir for spaces inside file path PBI System 9.0 System Defect closed 2011-10-02T13:42:43-07:00 2011-10-05T04:33:41-07:00 "Way to reproduce: Install PBI with file name/path containing a space, delete this pbi and run pbi_delete --clean-hdir {{{ Cleaning shared-hash dir... stat: /usr/pbi/.hashdir-user/share/doc/enemyterritory/Help/Manual/images/ET: stat: No such file or directory stat: logo.jpg:::dcef2608928b062ec937bb7dd6fc88138a24ad9e6df9b678f32ba0aeb7a41441: stat: No such file or directory }}}" Nukama 378 No cases for other versions of FreeBSD, than CURRENT and RELEASE in function pbi-manager:mk_chroot_file(). PBI System 9.0-BETA1 System Enhancement closed 2011-08-23T14:59:09-07:00 2011-08-23T17:08:36-07:00 "This affects users of .0-{BETA,RC}, -STABLE and rarely used versions of FreeBSD. The mk_chroot_file creation process cannot be handled by the current implementation of pbi-manager on these systems. Solution 1: Build from sources after manually fetching them. {{{ # cd /usr/src # make buildworld installworld distribution DESTDIR=${PBI_BUILDTARGET} # mkdir -p ${PBI_BUILDTARGET}/usr/src # tar cvf - -C ""/usr/src"" --exclude ""\.svn/"" . 2>/dev/null | tar xvf - -C ""${PBI_BUILDTARGET}/usr/src"" 2>/dev/null # tar cvjf ${PBI_APPDIR}/.pbi-world.tbz -C ${PBI_BUILDTARGET} . }}} Solution 2: Test attached patch, and hope for a good outcome." Nukama 187 Update is not update... PBI Updater 8.0-ALPHA 8.0 System Defect closed 2009-11-30T10:48:58-08:00 2010-07-07T07:45:24-07:00 "Can PC-BSD team in next release of PC-BSD make ""update just update""? In 7.1.1 release, when I updating application, system first uninstall old version of application and then install a new version of app. I think is easier ""just update"" so from Firefox 3.5.4 - to 3.5.5 is just about 2 MB update file (NOT a 40 MB full program) I think thats can save space on PC-BSD servers and can save a lot of time to people with slow internet connection. CAN PC-BSD team do something like this to the next release? Thanks a lot," nicleman 170 Add mirrors to PC-BSD Update Manager PBI Updater 7-BETA1 System Enhancement closed 2009-08-11T13:18:28-07:00 2009-10-08T08:38:43-07:00 "pbidir.com offers you some mirrors to download the PBIs from. On servers near me I get up to 600 kB/s downloads but when I use the PC-BSD Update Manager to update the PBIs I mostly get ~100 kB/s. It would be great to be able to select the mirrors from pbidir. BTW: Trac misses Version 7.1.1, so I select 7-BETA1" lme 591 PBI update message should open to appcafe pbi list screen, not search screen PBI Updater 9.0-RELEASE System Enhancement closed 2012-02-29T11:28:50-08:00 2012-03-01T11:09:51-08:00 Right now when one clicks on the dialogue telling you that a PBI update is available, it opens AppCafe to the main window where one can search for new PBIs. It should open to the list of current PBIs, where you can update any pending ones. bmilman 313 Downloading PCBSD_8.1-RC1 impossible pbidir.com 8.1-RC1 8.1 System Defect TWiN closed 2010-06-26T04:22:28-07:00 2010-07-06T12:32:58-07:00 "Greetings to All Went to download RC-1 and www.phobos.tk is not available. This using the USA-West Coast mirror. Looking forward to 8.1 ! Hopefully the various Firefox crashes have been relegated to history (see my earlier bug reports) :) :) Well done on such a fab Op Sys. 8.0 rocks ! Regards Ken Gibbs * * *" GeeKen 104 pbidir.com - problem with release dates pbidir.com System Defect TWiN closed 2008-02-27T18:14:14-08:00 2008-03-01T08:54:49-08:00 When releasing a new PBI, the dates of the previous releases are all updated with the last date TWiN 602 Fish Shell Team link in PCI Repository incorrect. pbidir.com 9.0-RELEASE System Defect TWiN closed 2012-04-27T18:37:40-07:00 2012-05-01T06:41:01-07:00 "The link for the Fish Shell Team points to fishshell.org - which appears to be incorrect. I believe fishshell.com may be correct. The link appears incorrect in both pbidir.com and in the AppCafe." paul 97 ability for user to choose language pbidir.com System Enhancement TWiN closed 2008-02-19T04:39:08-08:00 2008-04-11T10:32:12-07:00 "on pbidir.com would be nice if the user is able to choose the language. for example: - http://www.pbidir.com/bt/lang/es should set the site in Spanish" TWiN 99 pbidir.com - user administration pbidir.com System Enhancement TWiN closed 2008-02-19T04:45:30-08:00 2008-03-02T10:11:57-08:00 "ability to change the status of some users in ""bulk""" TWiN 391 evolution 2.32.1_2 pbi broken under pcbsd9 beta 2 pbidir.com 9.0-BETA1 PBI Packaging Bug TWiN closed 2011-09-15T06:58:51-07:00 2012-02-22T05:54:05-08:00 "Hi, I've tried to install Evolution 2.32.1_2 pbi from app cafe on fresh pcbsd 9 beta 2 and i think that startup sh script is not fully working: i mean that PROGDIR is set to ""CHANGEME"" and to full path contains ""/Programs"" instead ""/usr/pbi/..."". Hope it helps to improve this great bunch of software. Thanks, Evgeny" nomoo 601 remmina tray icon broken pbidir.com 9.0-RELEASE PBI Packaging Bug TWiN closed 2012-04-16T03:15:54-07:00 2012-04-18T06:22:34-07:00 "Hello, remmina tray icon is broken. OS: PCBSD 9 Software version: 0.9.3_1 from PBI There is also a problem with ^G during ssh session, but it seems to be related to remmina itself." nomoo 98 RSS in pbiDir pbidir.com System Enhancement TWiN closed 2008-02-19T04:44:30-08:00 2008-03-01T11:45:48-08:00 "there is need to have RSS feeds for pbidir.com - latest pbi added - latest pbi release" TWiN 100 pbidir.com - search capability pbidir.com System Enhancement TWiN closed 2008-02-19T04:48:28-08:00 2008-04-11T13:46:52-07:00 "When the drop down is too big, would be great to have a search capability and not the dropdown. I.E.: - selecting an user during the creation of a pbi" TWiN 102 pbidir.com - add new fields pbidir.com System Enhancement TWiN closed 2008-02-26T17:36:38-08:00 2008-03-01T10:00:23-08:00 "Add a couple of new fields to the PBIs: - alternative for Window package - use wine - interface (graphical/web/Command Line)" TWiN 106 pbidir.com - user for pbi pbidir.com System Enhancement TWiN closed 2008-03-02T10:46:21-08:00 2008-03-02T10:47:31-08:00 "The user for the PBIs should be only the ones that are in specific groups - Maintainers - Root " TWiN 103 i18n support for pbidir pbidir.com 7.0 System Enhancement TWiN closed 2008-02-27T05:29:31-08:00 2008-02-27T06:02:21-08:00 PC-BSD is one of the best i18n supported system of the world, so whats about i18n support for pbidir.com? It would be nice if there an interface for language switching and translate pbi descriptions! kafkaesk 440 Upgrade to RC3 fails due to wrong nvidia-settings package PC-BSD Updater 9.0-BETA3 System Defect closed 2011-12-18T09:33:04-08:00 2011-12-21T06:21:04-08:00 "Hello, while trying to upgrade to PC-BSD 9.0-RC3 I receive this error message: {{{ # pc-updatemanager install release-9.0-RC3 STARTINGUPDATE: 9.0-RC3 Downloading Master Files... /usr/local/tmp/9.0-RC3/PCBSD.tbz.count 100% of 6 B 50 kBps /usr/local/tmp/9.0-RC3/PCBSD.tbz.md5 100% of 33 B 278 kBps /usr/local/tmp/9.0-RC3/xtra-data.tbz.md5 100% of 33 B 288 kBps Downloading Packages... fetch: ftp://ftp.pcbsd.org/pub/mirror/9.0-RC3/i386/netinstall/packages/nvidia-settings-285.05.09.tbz: File unavailable (e.g., file not found, no access) fetch: ftp://ftp.pcbsd.org/pub/mirror/9.0-RC3/i386/netinstall/packages/nvidia-settings-285.05.09.tbz: File unavailable (e.g., file not found, no access) }}} On the server there is the file nvidia-settings-290.10.tbz Is there a way to workaround this issue by hand? " tmow 710 Automatic pkg upgrade fails: xscreensaver conflict with xscreensaver-gnome PC-BSD Updater 9.1-RELEASE System Defect closed 2013-03-05T17:33:39-08:00 2013-03-08T10:06:20-08:00 "and afterwards the meta-pkg list shown in the system-manager is empty. What now? I do not installed GNOME, only KDE. Why do I need this pkg? System: PCBSD-9.1-RELEASE from /staging, 2013-02-26 IMHO this is of priority:critical because failing to upgrade pkgs affects the security of the system. I.e. I can not update pkgs although security fixes are available: $ pkg audit linux-f10-flashplugin-11.2r202.270 is vulnerable: linux-flashplugin -- multiple vulnerabilities sudo-1.8.6.p5 is vulnerable: sudo -- Potential bypass of tty_tickets constraints sudo-1.8.6.p5 is vulnerable: sudo -- Authentication bypass when clock is reset I do not know whether this is a bug of pkg or results from your assembly of meta-pkgs. Frankly, it'll take at least two decades until we can overcome the dependency hell ;)" mjollnirpaul 115 PCBSD Update Manager should require root password to install updates PC-BSD Updater System Enhancement closed 2008-03-17T11:43:15-07:00 2008-04-11T10:27:45-07:00 "The new Update Manager in 1.5 does not require the root password to install system updates as it runs through sudo as root NOPASSWD. I consider this a security risk. My suggestion would be to split the update manager into 2 seperate programs: 1) GUI + the code that checks for and downloads the updates. Set as 770 root:wheel 2) Non-gui code that actually performs the updates set as 700 root:wheel , called via kdesu by the first part. This would avoid the annoyance of being prompted for the root password when every wheel user logs in to start the manager, but without compromising BSD's security. (One could provide an option in the GUI for the current behaviour if desired, which would chmod g+rx the 2nd part (and stop launching it thru kdesu). )" pheet 82 Still update available after 1.4.1.1 updating with pbi PC-BSD Updater 1.4.1 System Defect closed 2007-12-03T14:39:10-08:00 2009-06-13T12:00:43-07:00 "My System things its a PC-BSD 1.4.1. and the PC-BSD OU shows me the message ""1 System Update available"".." kafkaesk 253 PC-BSD Updater still in english PC-BSD Updater 8.0-RC2 System Defect closed 2010-02-16T02:03:49-08:00 2010-02-16T06:59:11-08:00 "hello, we completed czech translation a month ago. But PC-BSD Updater is still in english (8.0 RC2). why? Other stings was updated. screenshot http://img7.imageshack.us/img7/9990/screenyr.jpg" JiriBergman 673 Wrong error message(s) by pc-updategui PC-BSD Updater 9.1-RC1 System Defect ken closed 2012-10-11T11:24:58-07:00 2012-11-02T09:30:56-07:00 "pc-updategui displays the following messages at stdio: {{{ [elwood@pcbsd-604] ~> sudo pc-updategui Locale: ""de"" ""All packages are up to date!"" ""Looking up update.FreeBSD.org mirrors... 3 mirrors found."" ""Fetching metadata signature for 9.1-RC1 from update4.FreeBSD.org... done."" ""Fetching metadata index... done."" ""Inspecting system... done."" ""Preparing to download files... done."" """" ""No updates needed to update system to 9.1-RC1-p0."" ((""System Update to 9.1-RC2"", ""SYSUPDATE"", ""9.1-RC2"", ""2012-10-09"", ""release-9.1-RC2"", ""http://www.pcbsd.org"") ) Update started ""ERROR: Less than 6GB free on /usr/local, please clear some additional space to continue!"" Finished Update Updates all Finished }}} at the GUI it shows: {{{ Failed to install: System Update to 9.1-RC2 Failed to install update! Please check your network connection, or change mirror servers in the System Manager. }}} It should show something like: {{{ Failed to install: Less than 6GB free on /usr/local, please clear some additional space to continue! }}} " Elwood 2 Re-write PC-BSD Online Updater to grab .tbz packages to update base system PC-BSD Updater 1.5 System Enhancement somebody closed 2007-08-13T10:18:02-07:00 2008-02-21T11:30:41-08:00 Re-write PC-BSD Online Updater to grab .tbz packages to update base system tim 125 new feature for system-upgrade PC-BSD Updater 1.5 7.0 System Enhancement kris closed 2008-04-25T18:15:40-07:00 2008-09-04T12:45:05-07:00 "Ability to specify a path where to save the updates once that they have been downloaded. The program will need to be able to grab a file from a path (like /share/PC-BSD/updates) if exists, and if not, will pass to download it from the net. This will allow a sysadmins to specify the path and have the computers download only one copy of the update and share them over the network." TWiN 443 """System updates available"" too aggressive." PC-BSD Updater 9.0-RELEASE System Defect closed 2011-12-20T20:12:37-08:00 2012-07-26T08:07:26-07:00 "During the download phase or install phase of an update the message ""system updates available"" should stop showing up. Additionally as long as the update window is open the message should stop showing on the task bar." eadler 637 Upgrade to PCBSD 9.1 RC-1 Gets Stuck Waiting on Reboot PC-BSD Updater 9.1-BETA1 System Defect kris closed 2012-08-23T09:33:29-07:00 2012-08-29T06:55:36-07:00 "This bug was reported by David30 on the PCBSD forums. When performing an update to PCBSD RC-1 the user's computer will stall at the point it is supposed to reboot. This has been confirmed by two users on the forums. I have not been able to duplicate the problem as of yet. I will make more information available as it comes in. Kris can you have a look at this?" joshms 168 "Add ""unknown"" icon to PC-BSD update manager" PC-BSD Updater 7-BETA1 System Enhancement closed 2009-06-11T05:40:08-07:00 2009-06-13T11:53:44-07:00 "From time to time I don't have any internet connection, so the update manager cannot connect to the update server. The icon in the tray then shows a green check mark. I find this very misleading as one might think that the system is up to date. My proposal is to add a new question mark or the like if the update server cannot be reached." lme 87 System update asked even when update diable in KDE PC-BSD Updater 1.4.1 1.5 System Defect tim closed 2008-01-08T07:38:11-08:00 2008-01-09T08:20:31-08:00 When the KDE update manager is configured not to check for the updates and not to fetch the updates. I am still asked if I want to update my system. nox1492 236 Update manager icon PC-BSD Updater 8.0-RC 8.0 System Defect closed 2010-02-04T05:51:15-08:00 2010-02-04T08:35:38-08:00 "Hello, I'm starting to use PC-BSD 8.0RC and I noticed that the update manager icon in systemtray doesn't warn me of update availability: it always stays green even if there is a PBI program update. " demianx681 311 Updater Status not refreshed after PBI update PC-BSD Updater 8.1-BETA1 System Defect closed 2010-06-14T23:34:22-07:00 2010-06-21T14:10:06-07:00 "Boot, Updater indicates PBI Update available (vlc). Update vlc -> ok[[BR]] Updater icon in panel still indicates PBI Update available (vlc)[[BR]] After triggering search for updates manually status is refreshed and correctly indicates no updates available" bitraptor 336 Updater Status not refreshed after PBI update PC-BSD Updater 8.1 System Defect closed 2010-07-24T23:33:55-07:00 2012-01-21T22:39:26-08:00 "Same as #311 for 8.1-BETA1[[BR]] After updating vlc and Firefox updater icon still indicates necessary PBI updates. Status correctly refreshed after checking for updates manually." bitraptor 196 "Dell Precision 470 ""Powerd daemon"" keeps cpu at 25%" Service Manager 7.0.2 System Defect closed 2009-12-16T17:43:22-08:00 2009-12-17T07:13:14-08:00 "This bug makes the system continue to eat resources, make the mouse very irratic on the screen when moving it and slows the performance a bit down. This system has 3ghz 64bit processor and 3GB of RAM. When killing the powerd daemon the problem is solved. Uname -a provides the following: uname -a FreeBSD pcbsd 7.2-STABLE FreeBSD 7.2-STABLE #0: Mon Oct 5 15:00:33 EDT 2009 root@pcbsd:/usr/obj/usr/src/sys/PCBSD.amd64 amd64 " mcse_mcse@… 165 Services problem Service Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-05-07T09:46:17-07:00 2009-12-29T10:01:00-08:00 "Service can be set to autostart (record in rc.conf) and can be not auto-started. If service is not auto-started, buttons ""Start"", ""Restart"" simply notworking, due to freebsd architect." yerenkow 194 Broken downloaded PBI produce problem to SoftManager Software Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-12-16T14:24:51-08:00 2009-12-17T13:50:53-08:00 "When PBI are broken somehow, it downloads, and after it fails to install it not deleted sometimes, and stays as *.tmp. In settings checkbox ""leave files after download"" is unchecked. Need to fix this, because this failed-stayed file prevents this PBi to install, no matter how much times you trying." yerenkow 234 Software Manager not updating 7.1 applications Software Manager 8.0-RC System Defect closed 2010-02-02T21:57:31-08:00 2010-02-03T07:37:34-08:00 "Updating from 7.1.1 to 8.0-RC without choosing optional components[[BR]] 1) Software Manager does not see the need to update the installed 7.1 applications[[BR]] 2) Removing an 7.1 application does not completely remove the applications, menu entry + crippled version remaining (e.g. gimp starting but with no text in the menus). Applications not listed under Installed Software any more[[BR]] 3) Adding the application again fails silently, after the download installation starts, silently fails and the application is dropping out of the list[[BR]] 4) Manually downloading and installing the 8.0 pbi succeeds, leaving a duplicate menu entry - can be removed with kmenuedit" bitraptor 191 Inactivity about 30 minutes produce error Software Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-12-16T13:44:31-08:00 2009-12-28T10:21:52-08:00 "Open softmanager, wait about 30-60 minutes, and site ""forget"" that you are browing from softmanager, and show simple site, with language/platform selection, and button ""download""" yerenkow 192 Automatic mirror not working Software Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-12-16T14:02:45-08:00 2009-12-18T09:24:42-08:00 "Seems that auto-mirror choses random one. But this isn't guaranteed that this PBI exists there. So, here in EU region, until I chose some exact one, I've almost always got error in download." yerenkow 655 Needed package for kdevelop Software Manager 9.1-BETA1 9.1 System Defect closed 2012-09-02T15:02:23-07:00 2012-09-04T07:46:46-07:00 "You require automoc4 to enable kdevelop to build certain examples. installing automoc4 fixed the issues. I am using 9.1-RC1" cpet 209 Software Manager spawns infinite browsers on some PBIs Software Manager 8.0-ALPHA System Defect closed 2010-01-02T19:09:05-08:00 2010-01-04T11:49:30-08:00 "When trying to install the app ""PBI builder"" or ""Crossover Games"" via Software Manager, it just constantly spawns new browser windows until you kill the Software Manager. Verified that some other PBIs (like last.fm) install fine." mbybee 195 No context-menu when PBI are downloads Software Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-12-16T14:29:37-08:00 2009-12-17T13:29:36-08:00 "There should be ""cancel"".[[BR]] Because there is ability to cancel via button, but no context menu. " yerenkow 205 Software manager allowed to leave pbidir.com Software Manager 8.0-ALPHA 8.0 System Defect kris closed 2009-12-22T10:18:38-08:00 2009-12-28T10:21:09-08:00 "Go to development, then to PBI builder, then download, you'll get to pcbsd.org from there you can go to any site listed in kde, freebsd, forum or else places." yerenkow 206 Button for re-create all missing desktop icons Software Manager 8.0-ALPHA 8.0 System Enhancement kris closed 2009-12-22T11:39:24-08:00 2009-12-28T09:59:54-08:00 "One button, to re-create all missing desktop icons at once. Would be useful;" yerenkow 608 Disable install icons menu options on PBIs without icons in appcafe. Software Manager 9.0-RELEASE 9.1 System Enhancement closed 2012-06-06T13:26:35-07:00 2012-06-28T11:09:58-07:00 "I suggest that in the installed PBIs window in appcafe, the contextual menu for pbis without icons not contain the ""install desktop/menu icons"" options. Currently those options silently do nothing." bmilman 129 problem loading apache22 System Configuration 1.5.1 System Defect closed 2008-05-06T12:16:34-07:00 2008-05-07T06:06:39-07:00 "I just loaded pcbsd to develope a database using postgresql. I'm trying to load apache22 at boot time and get the following error message: Shared object ""libthr.so.3"" not found, requested by ""libaprutil-1.so.2"" Thank you, Robert Falanga" rjfalanga 48 if_em driver System Configuration 1.4 System Defect kris closed 2007-09-18T01:35:13-07:00 2007-09-18T08:18:46-07:00 "There is a bug in the if_em driver that chips with 1.4RC. This causes latency problems and makes it hard to use on late thinkpads among others. The following should fix the problem: --- if_em.dist.c Wed Jan 17 17:59:46 2007 +++ if_em.c Wed Jan 17 18:03:13 2007 @@ -3348,6 +3348,10 @@ E1000_WRITE_REG(&adapter->hw, RXCSUM, reg_rxcsum); } + /* TEMPORARY WORKAROUND for X60 */ + if (adapter->hw.mac_type == em_82573) + E1000_WRITE_REG(&adapter->hw, RDTR, 32); + /* Enable Receives */ E1000_WRITE_REG(&adapter->hw, RCTL, reg_rctl); /* //Jon" jon@… 50 unable to load printer driver (Foomatic) for epson stylus photo 825 System Configuration 1.4 System Defect closed 2007-09-18T23:10:14-07:00 2007-10-06T09:32:38-07:00 "While trying to add printer, either in user mode or admin mode the following error occurs: Unable to load the requested driver: Unable to create the Foomatic driver [Epson-Stylus_Photo_825,gutenprint]. Either that driver does not exist, or you don't have the required permissions to perform that operation. Asrock 915dual celeron D 3.06ghz 1GB Pc3200 160GB SATA Maxtor Intel 915g onboard video PC-BSD 1.4RC" tcg 118 Missing X.org Fonts System Configuration 1.4.1 System Defect closed 2008-03-25T13:19:38-07:00 2008-04-11T09:51:36-07:00 "X.org Fonts (truetype I belive) are msssin gin the install, leading to eror messages such as: ---- Warning: Cannot convert string ""-*-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-*"" to type FontStruct Warning: Unable to load any usable ISO8859 font Warning: Cannot convert string ""-*-helvetica-medium-r-*--*-120-*-*-*-*-iso8859-1 ---- and the application failing to start. This affects various x utilities, emacs, etc. not working. See [http://forums.pcbsd.org/viewtopic.php?f=7&t=9009 forum thread]. This bug is present in 1.3, 1.4.*, and is still present in 1.5. == Workaround== As root, in a console forceable reinstall the X.org fonts package: {{{ pkg_add -rfF xorg-fonts}}} then re-start the X-server (e.g. Logout, then log-in again.)" pheet 646 Stand-By doesn't work at all System Configuration 9.0-RELEASE System Defect closed 2012-08-29T18:40:04-07:00 2012-09-04T07:23:04-07:00 "I use PC-BSD 9.0 x86 on a Desktop PC equipped with an ASUS P5KPL-AM motherboard (Intel G31 chipset) and an NVIDIA GeForce 9800 GT video card (G92 GPU). My video card uses the NVIDIA proprietary driver, version 290.10. The ""Sleep"" and functionality is proposed into the main menus of GNOME 2 and KDE 4, so apparently this might work (in Linux, when it appears, it normally works). So I've decided to give it a try. The system effectively stands-by, but unlike Linux, I'm obliged to wake-up the system by pressing the PC On/Off button instead of simply hit a random key on the keyboard. The big problem occurs when the OS wakes-up : in fact, it never wakes-up, the screen remains all black and the hard disk rotates continuously (I've seen my HDD LED illuminated during 10 minutes before manually resetting the PC). There is also a problem with hibernation, too. But as it's a different thing, I'll do a seperate ticket on that." Boug 647 Hibernation doesn't really work System Configuration 9.0-RELEASE System Defect closed 2012-08-29T19:25:39-07:00 2012-09-04T07:23:28-07:00 "I use PC-BSD 9.0 x86 on a Desktop PC equipped with an ASUS P5KPL-AM motherboard (Intel G31 chipset) and an NVIDIA GeForce? 9800 GT video card (G92 GPU). My video card uses the NVIDIA proprietary driver, version 290.10. The ""Hibernate"" functionality is proposed into the main menus of GNOME 2 and KDE 4, so apparently this might work (in Linux, when it appears, it normally works). So I've decided to give it a try. The system effectively seems to hibernate (I didn't notice the usual quite long RAM-to-HDD recording that occurs under Linux, because I had only 73 MB occupied in RAM on a total of 3.5GB available (limitation of non-PAE x86), but unlike Linux, the system is shot down somewhat roughly, as I have to presss the PC On/Off button instead of simply press the combination Ctrl+Esc as I usually do with my ASUS motherboard to start-up my PC. The real problem occurs when the system restarts : it doesn't resume from the swap partition, but starts an all new session instead! I didn't see any error message about my swap or anything else during the hibernation process. All seemed to work until I switched on my PC again. So, for now it's a ""false hibernation"". Sorry for all these Linux-related comparisons, but at those times I made bug reports on Linux distros, I used Windows as a comprison reference ^^" Boug 648 Hibernation doesn't really work System Configuration 9.0-RELEASE System Defect closed 2012-08-29T19:25:59-07:00 2012-08-30T04:50:10-07:00 "I use PC-BSD 9.0 x86 on a Desktop PC equipped with an ASUS P5KPL-AM motherboard (Intel G31 chipset) and an NVIDIA GeForce? 9800 GT video card (G92 GPU). My video card uses the NVIDIA proprietary driver, version 290.10. The ""Hibernate"" functionality is proposed into the main menus of GNOME 2 and KDE 4, so apparently this might work (in Linux, when it appears, it normally works). So I've decided to give it a try. The system effectively seems to hibernate (I didn't notice the usual quite long RAM-to-HDD recording that occurs under Linux, because I had only 73 MB occupied in RAM on a total of 3.5GB available (limitation of non-PAE x86), but unlike Linux, the system is shot down somewhat roughly, as I have to presss the PC On/Off button instead of simply press the combination Ctrl+Esc as I usually do with my ASUS motherboard to start-up my PC. The real problem occurs when the system restarts : it doesn't resume from the swap partition, but starts an all new session instead! I didn't see any error message about my swap or anything else during the hibernation process. All seemed to work until I switched on my PC again. So, for now it's a ""false hibernation"". Sorry for all these Linux-related comparisons, but at those times I made bug reports on Linux distros, I used Windows as a comparison reference ^^" Boug 649 Hibernation doesn't really work System Configuration 9.0-RELEASE System Defect closed 2012-08-29T19:26:08-07:00 2012-09-04T07:24:11-07:00 "I use PC-BSD 9.0 x86 on a Desktop PC equipped with an ASUS P5KPL-AM motherboard (Intel G31 chipset) and an NVIDIA GeForce? 9800 GT video card (G92 GPU). My video card uses the NVIDIA proprietary driver, version 290.10. The ""Hibernate"" functionality is proposed into the main menus of GNOME 2 and KDE 4, so apparently this might work (in Linux, when it appears, it normally works). So I've decided to give it a try. The system effectively seems to hibernate (I didn't notice the usual quite long RAM-to-HDD recording that occurs under Linux, because I had only 73 MB occupied in RAM on a total of 3.5GB available (limitation of non-PAE x86), but unlike Linux, the system is shot down somewhat roughly, as I have to presss the PC On/Off button instead of simply press the combination Ctrl+Esc as I usually do with my ASUS motherboard to start-up my PC. The real problem occurs when the system restarts : it doesn't resume from the swap partition, but starts an all new session instead! I didn't see any error message about my swap or anything else during the hibernation process. All seemed to work until I switched on my PC again. So, for now it's a ""false hibernation"". Sorry for all these Linux-related comparisons, but at those times I made bug reports on Linux distros, I used Windows as a comparison reference ^^" Boug 4 Fix i18n Support System Configuration 1.4.1 1.5 System Defect someone closed 2007-08-13T10:26:30-07:00 2008-02-22T07:24:17-08:00 Fix i18n Support tim 130 NTFS-3G System Configuration 1.5.1 7.1 System Enhancement closed 2008-05-31T16:17:41-07:00 2008-10-20T11:14:14-07:00 "Hi, probably somebody asked that ( i search and don't find this), so, i'm suggesting to include Fuse-NTFS-3G in the system. Is very good, write in NTFS filesystem, and is a enhancement very good. Thanks." josiaslg 322 Update to Nvidia 256.35 driver for Nvidia GTX 460/480/465/470 System Configuration 8.1-RC1 8.1 System Enhancement closed 2010-07-12T15:03:56-07:00 2010-07-13T05:00:38-07:00 "Please provide the Nvidia 256.35 FreeBSD x86_64 video driver with the PC-BSD 8.1 distro. This driver provides proper support for the Nvidia GTX 460/480/465/470 'Fermi' video cards. http://us.download.nvidia.com/XFree86/FreeBSD-x86_64/256.35/NVIDIA-FreeBSD-x86_64-256.35.tar.gz" indezign 355 system freezes shortly after startup System Configuration 8.2 System Defect closed 2011-01-12T07:50:19-08:00 2012-01-26T11:53:28-08:00 "My computer is a Dell Demension E310. On 8.2 RC1, the desktop crashes a few seconds after it finishes loading. The clock is frozen and I can't do anything except push the off button on my computer. I have tried booting in safe mode, but I get the same result. I had this problem with 8.1 as well, but with that release I was able to solve it by booting in safe mode and then shutting down properly." ashumaloz 474 pc-sysinstall fails to sort datasets/mountpoints properly; fails on nested datasets System Configuration 9.0-BETA3 9.1 System Defect closed 2012-01-13T16:10:03-08:00 2012-09-04T07:36:15-07:00 "1. Setup PCBSD 9 via advanced partitioning to install ZFS-only. 2. Create mountpoints for /usr, /usr/home, /var, /var/empty, etc. 3. Install will fail when creating datasets because the datasets aren't sorted appropriately (in this case it failed to create the /usr dataset before it created the /usr/home dataset)." gcooper 374 Frozen bubble did not start System Configuration PBI Packaging Bug closed 2011-06-25T03:33:12-07:00 2012-03-28T05:56:57-07:00 "Hello, I installed frozen bubble on a 64 bit versie 9 system. But when I try it to start I see this message : Failed to execute child process ""/usr/pbi/frozenbubble-amd64/.sbin/frozen-bubble.sh"" (No such file or directory) Also when I do pbi --checkscript I don't see the script. Roelof" roelof 594 gnome screen saver Conflicts with Xscreensaver System Configuration 9.0-RELEASE PBI Packaging Bug closed 2012-03-15T10:49:48-07:00 2012-03-28T06:59:18-07:00 "this is my first bug report so please be considerate if I didn't do it right, in the gnome D.E. when entering screen saver settings from gnome panel menu >system >preferences you get the X screen saver instead of the gnome one which is the actual running one, thus for example if you like to set the time for the computer to enter screen saver or stop it from locking when in screen saver mode - you just unable to do so. The real screen saver can be reached by going into: /usr/local/bin/gnome-screensaver-preferences " jhon 671 virtualbox problem System Configuration 9.0-RELEASE PBI Packaging Bug closed 2012-10-09T14:13:48-07:00 2012-11-05T09:39:52-08:00 "$ uname -a FreeBSD pcbsd-1427 9.0-RELEASE FreeBSD 9.0-RELEASE #3: Tue Dec 27 21:59:00 UTC 2011 root@build9x64.pcbsd.org:/usr/obj/builds/i386/pcbsd-build90/fbsd-source/9.0/sys/GENERIC i386 $ VirtualBox VirtualBox: supR3HardenedMainGetTrustedMain: dlopen(""/usr/pbi/virtualbox-i386/lib/virtualbox/VirtualBox.so"",) failed: /usr/pbi/virtualbox-i386/lib/virtualbox/VirtualBox.so: Undefined symbol ""_ZN19QAbstractProxyModel11setItemDataERK11QModelIndexRK4QMapIi8QVariantE"" " adsfasdfadf 10 Windows Key configured wrong System Configuration 1.4-DEV / 1.4-BETA System Defect closed 2007-08-15T06:05:39-07:00 2007-08-30T08:44:13-07:00 http://forums.pcbsd.org/viewtopic.php?t=9131 gerard 19 Problem with Polish characters in default fonts System Configuration 1.4-DEV / 1.4-BETA System Defect closed 2007-09-05T15:55:52-07:00 2007-09-06T13:50:05-07:00 After fresh install of 1.4RC with Polish language set, all texts are defected (on login screen, K Menu, window titles, desktop). Default fonts are missing some Polish characters. Both default Sans Serif and installed Bitstream Vera don't include these characters. DejaVu font handles these characters, but its look is unacceptable. Derbeth 56 Flash don´t work in 1.4Final System Configuration 1.4 System Defect Plage closed 2007-09-25T12:57:05-07:00 2007-09-25T14:35:05-07:00 "Opera and Flash are OK Mozilla Firefox 2.0.0.6 & Konqueror don´t work" Plage 59 Login Screen System Configuration 1.4 System Defect closed 2007-10-01T11:51:53-07:00 2007-10-02T07:21:32-07:00 "http://forums.pcbsd.org/viewtopic.php?f=1&t=9809 the wrong login screen? " Plage 65 Webpages cause lock up and hard reboot System Configuration 1.4 System Defect kris closed 2007-10-13T05:23:13-07:00 2008-04-11T10:41:05-07:00 When I visit certain webpages (in both Konqueror and FF) they cause the entire system to lock up. The web pages seem to be java dependent. The web pages are www.drudgereport.com and www.pcbsd.org. I am using 1.4 fresh install as of 8 days ago. I have the following PBIs installed: all-codecs, FF, OO.org, k3b, Picasa and TTFonts, and the 1.5.07 JRE. I have let the system sit for up to an hour afterward and the system remains locked up; no screen saver, the screen remains stuck and the icons and everything are visible but I cannot interact with it at all. Only way to resolve is through a hard reboot. justin_p 66 hard lockups System Configuration 1.4 System Defect closed 2007-10-17T20:22:02-07:00 2007-10-26T08:57:13-07:00 We believe this was caused by powerd being enabled and some certain AMD processors. I've put in a fix for 1.4.1 and higher now. RobP7 74 After upgrade to 1.4.1 printing has stopped working.. System Configuration 1.4 System Defect closed 2007-11-20T11:05:58-08:00 2007-11-26T12:01:10-08:00 "After the upgrade, printing has stopped working. I now get an error ""Error While Printing"" Is there an error report that I should send? Thanks! Andrew " vintagevolks2000 75 Firefox-Wine crashes on repeat use due to two versions of wine-pthread running System Configuration 1.4 System Defect closed 2007-11-23T01:31:30-08:00 2007-11-26T03:40:14-08:00 "Firefox-Wine runs fine the first time after an install, but then crashes every time on repeat use due to two versions of ""wine-pthread"" running after a re-start of Firefox-Wine. The locked up and frozen Firefox-Wine can be restored to active use by killing one of the two ""wine-pthread"" files, though if the wrong one is selected to be killed, instead of freeing up the locked Firefox, it is also killed. I'm running PC-BSD version 1.4.1 on about a 4-5 year old system with an Athlon 2000 processor, and an Nvidia video card. Mine is a stand-alone system for home use." lsayre 80 Upgrade from 1.3.5 to 1.4.1 System Configuration 1.4.1 System Defect closed 2007-11-27T12:34:12-08:00 2008-10-20T09:35:03-07:00 "Upgrade from 1.3.5 to 1.4.1 Here are some of the bugs i noticed as soon as i installed 1.4.1 on my computer *KDEInit could not launch'dbsd-nettray' Could not find 'dbsd-nettray' executable *Did not start on dhclient *smb4k was completely GONE *FireFox and Opera do not launch. Upgrading FireFox PBI worked but it won't upgrade Opera and it won't show Opera to uninstall. *No PBI's from 1.3 show in add/remove I will let you know if i find anymore problems! " pcbsdgirl 81 Flash does not work in Firefox 2.0.0.9 System Configuration 1.4.1 System Defect closed 2007-11-27T23:55:52-08:00 2008-04-11T10:30:26-07:00 After upgrading to 1.4 Flash stopped working in Firefox.. I thought that it might be corrected on 1.4.1, but still does not work. I upgraded to the latest PBI 2.0.0.9 and it still does not work. I see that other people have had this issue and Tim was not able to replicate.. Is there something that I should try? vintagevolks2000 83 Nvidia driver not working since 1.4.1, 1.4.1.1 on GF8800GTS System Configuration 1.4.1 System Defect closed 2007-12-06T15:23:08-08:00 2008-04-11T09:14:30-07:00 "I can no longer use a 3d nvidia driver with PC-BSD since 1.4.1 was released. 1.4.o worked fine. I boot and get to the res/driver selection system but none of the Nvidia 3D drivers work. I am forced to use nv..." pcbsdusr 90 35% packet loss with rt2561 (ral) System Configuration 1.4.1 System Defect closed 2008-02-03T15:50:08-08:00 2008-02-04T16:04:25-08:00 "network configuration: dhcp, wep128, ipv4 wlan card: MSI PC54G2 (rt2561 chip) driver: ral After configuring the network, dhcp takes a few seconds, but works. I receive an ip address and can ping my wireless router (a fritz box), but the connection is pretty unstable, because I've got 35% packet loss. PC-BSD version 1.4.1. Obviously I can't do an update." thorstenhirsch 93 PBI Error Warning System Configuration 1.4.1 System Defect closed 2008-02-09T18:57:46-08:00 2008-02-20T07:29:11-08:00 "Hi, I installed some PBI's and after the installation he ask if i want upload the PBI installed to the server. If you say yes, he give a error message. This can be disable by default ? some new users can be confusing by that. I download the pbi from a mirror here in brazil. Thanks." josiaslg 105 OpenOffice accents problem System Configuration 1.4.1 System Defect closed 2008-02-29T19:49:36-08:00 2008-03-03T03:44:24-08:00 "In the PBI version of OpenOffice.org 2.2.1, included in PC-BSD 1.4, the characters ""á"", ""é"", ""í"", ""ó"", ""ú"" cannot be written, either in uppercase or lowercase. Not even when you download the ""es"" locale configuration files. These are needed for the spanish and other languages." tommy_yanez 116 PBI Updates via the new System Updater in PC-BSD 1.5 fail System Configuration System Defect kris closed 2008-03-20T04:47:41-07:00 2008-04-11T10:31:19-07:00 "System Updater works for System Updates but not for PBI Updates. After downloading any PBI by the new update manager the following message occurs: ""The updated version of X failed the integrity check! Please try updating this PBI again later."" " TheThunderer 119 X corrupted? after version 1.5 update or fresh install System Configuration 1.5 System Defect closed 2008-03-28T14:10:46-07:00 2009-06-13T12:05:17-07:00 "I've been using PC-BSD as one of three Operating Systems on my eMachines M5312 laptop the last few years. Its worked great and has been less trouble for me than WinXP or Suse. I recently had to replace the harddrive and did a fresh install of everything including PC-BSD and this time installed 1.5 fresh (Previous install was 1.3, I'm bad about updating). Installation went well, and I was able to boot it up, but when I should have been presented with a GUI asking for my desktop settings, I instead got a garbled desktop image (see attached pic). The cursor was rendered correctly and moved around, but I couldn't proceed any further. Interestingly, the installation GUI for 1.5 appeared to correctly detect that I had a 16:10 ratio display, whereas previous versions simply rendered a 4:3 image (images stretched out). Just in case I had messed something up, I reinstalled over it with the same result. I then did a fresh install over the same partition with version 1.4.1 and no problem, I got the desktop settings GUI (providing 1280x800,24bit,ati-3d-enable) and everything displayed and worked perfectly. I then booted from the 1.5 CD and chose the update option, and the condition recurred upon reboot. The last thing I could read was ""Starting X"". FYI, there doesn't appear to be a 1.5 version choice in the ticket menu. Specs of my laptop include ATI radeon mobility 320M, 1GB RAM (128MB shared to video), 15.4"" WXGA LCD display. When configuring 1.4.1, it wasn't necessary to configure custom refresh rates, the defaults work. I will say that of the three OSes, PC-BSD was the simplest and quickest installation. Thanks for a great Desktop OS, Dave" digital_smith 120 French keyboard layout is not loaded during install System Configuration 1.5 System Defect closed 2008-04-03T18:00:38-07:00 2008-04-06T23:03:28-07:00 "When installing PCBSD choosing the keyboard in the first install screen doesn't load the corresponding layout. I've installed PCBSD and have chosen a french keyboard in the first screen but the keyboard is still in qwerty during all the install process (wich is very anoying especialy when creating new users and type the corresponding password). The french keyboard layout is correctly loaded when installation is finished and PCBSD is booting from the harddrive, so the problem is only with the install process. " goldenear 121 nvidia ethernet not loaded at boot. System Configuration 1.5 System Defect closed 2008-04-03T18:04:56-07:00 2008-04-06T23:03:43-07:00 I'm using an asus K8N motherboard with nforce5 chipset. The two integrated nvidia ethernet ports/nics are not automatically recognised at boot. I have to manualy load the if_nfe.ko module (with kldload in a shell) in order to get them working. goldenear 137 PC-BSD does not suppose file change notifications for Wine System Configuration 7-BETA1 System Defect closed 2008-10-09T13:54:26-07:00 2010-07-07T07:49:56-07:00 "See also: http://bugs.winehq.org/show_bug.cgi?id=12840 Wine's testsuite has quite a few failures on PC-BSD. This one focuses on the need for Wine to receive file change notifications. This is needed by several apps, e.g., Picasa. Please let me know if any more information is needed, from either my system or Wine developers." austinenglish@… 138 Wine's winmm:wave test fails in PC-BSD System Configuration 7-BETA1 System Defect closed 2008-10-09T14:00:19-07:00 2010-07-07T07:49:24-07:00 "See also: http://bugs.winehq.org/show_bug.cgi?id=12858 Wine's testsuite has quite a few failures on PC-BSD. This one focuses on the failures of the winmm:wave test: wave.c:475: Test failed: waveOutGetPosition(0): returned 43422 samples (43422 bytes), should be 22050 (22050 bytes) wave.c:501: Test failed: waveOutGetPosition(0): SMPTE test failed wave.c:512: Test failed: waveOutGetPosition(0): MIDI test failed wave.c:523: Test failed: waveOutGetPosition(0): TICKS test failed Please let me know if any more information is needed, from either my system or Wine developers." austinenglish@… 139 Wine's ntdll: exception.ok test fails in PC-BSD System Configuration 7-BETA1 System Defect closed 2008-10-09T14:02:49-07:00 2010-07-07T07:50:22-07:00 "See also: http://bugs.winehq.org/show_bug.cgi?id=12858 Wine's testsuite has quite a few failures on PC-BSD. This one focuses on the failures of the ntdll: exception.ok test: exception.c:602: Test failed: expected 4 exceptions, got 0 fixme:seh:fpe_handler untested SIMD exception: 0. Might not work correctly Please let me know if any more information is needed, from either my system or Wine developers." austinenglish@… 140 Wine's kernel32: thread test fails in PC-BSD System Configuration 7-BETA1 System Defect closed 2008-10-09T14:05:05-07:00 2010-07-07T07:50:45-07:00 "See also: http://bugs.winehq.org/show_bug.cgi?id=12894 Wine's testsuite has quite a few failures on PC-BSD. This one focuses on the failures of the kernel32: thread test: thread.c:285: Test failed: CreateRemoteThread failed, err=5 thread.c:287: Test failed: waiting for thread failed, ret=4294967295 thread.c:294: Test failed: CreateRemoteThread failed, err=5 thread.c:302: Test failed: GetExitCodeThread failed, err=87 Please let me know if any more information is needed, from either my system or Wine developers." austinenglish@… 141 Wine's kernel32: thread test fails in PC-BSD System Configuration 7-BETA1 System Defect closed 2008-10-09T14:06:54-07:00 2010-07-07T07:51:08-07:00 "See also: http://bugs.winehq.org/show_bug.cgi?id=12896 Wine's testsuite has quite a few failures on PC-BSD. This one focuses on the kernel32: pipe.ok hanging. There is no terminal output. There is a +ntdll,+pipe trace attached to the Wine bug. Please let me know if any more information is needed, from either my system or Wine developers." austinenglish@… 142 Wine's quartz: filtermapper test fails in PC-BSD System Configuration 7-BETA1 System Defect closed 2008-10-09T14:08:14-07:00 2009-09-04T03:24:46-07:00 "See also: http://bugs.winehq.org/show_bug.cgi?id=14859 Wine's testsuite has quite a few failures on PC-BSD. This one focuses on the quartz: filtermapper hanging: err:avicap:query_video_device Video 4 Linux support not enabled err:avicap:query_video_device Video 4 Linux support not enabled filtermapper.c:142: Test failed: EnumMatchingFilters failed to return the test filter 2 fixme:quartz:Inner_QueryInterface No interface for {56a8689f-0ad4-11ce-b03a-0020af0ba770} Please let me know if any more information is needed, from either my system or Wine developers." austinenglish@… 143 Wine's gdi32: bitmap test fails in PC-BSD System Configuration 7-BETA1 System Defect closed 2008-10-09T14:09:25-07:00 2010-07-07T07:51:53-07:00 "See also: http://bugs.winehq.org/show_bug.cgi?id=15324 Wine's testsuite has quite a few failures on PC-BSD. This one focuses on the gdi32: bitmap hanging: bitmap.c:1193: Test failed: GetDIBits with 4 bpp DIB selected in DC: Invalid DIB bits bitmap.c:1193: Test failed: GetDIBits with 8 bpp DIB selected in DC: Invalid DIB bits err:x11drv:X11DRV_CreateBitmap Trying to make bitmap with planes=1, bpp=8 err:x11drv:X11DRV_CreateBitmap Trying to make bitmap with planes=1, bpp=24 err:x11drv:X11DRV_CreateBitmap Trying to make bitmap with planes=1, bpp=32 err:bitmap:DIB_GetBitmapInfo (39): unknown/wrong size for header err:bitmap:DIB_GetBitmapInfo (11): unknown/wrong size for header err:bitmap:DIB_GetBitmapInfo (13): unknown/wrong size for header err:bitmap:DIB_GetBitmapInfo (16): unknown/wrong size for header *** Error code 2 Please let me know if any more information is needed, from either my system or Wine developers." austinenglish@… 144 Wine's gdi32: palette test fails in PC-BSD System Configuration 7-BETA1 System Defect closed 2008-10-09T14:10:19-07:00 2009-09-04T03:26:16-07:00 "See also: http://bugs.winehq.org/show_bug.cgi?id=15325 Wine's testsuite has quite a few failures on PC-BSD. This one focuses on the gdi32: palette failing: palette.c:91: Test failed: getColor=00423021 palette.c:98: Test failed: getColor=00524131 palette.c:113: Test failed: getColor=00635142 *** Error code 3 Please let me know if any more information is needed, from either my system or Wine developers." austinenglish@… 152 Test Ticket System Configuration 7.0.1 System Defect closed 2008-10-20T11:23:39-07:00 2008-10-20T11:24:41-07:00 This is a sample ticket to test e-mail CC. kris 153 2nd Test bug System Configuration 7-BETA1 System Defect closed 2008-10-20T12:13:41-07:00 2008-10-20T12:14:14-07:00 Testing this bug report for the mailing list. Ignore me! kris 157 File permissions wrong for USB Scanner System Configuration 7.0.1 System Defect closed 2008-10-24T02:38:52-07:00 2008-10-24T11:51:26-07:00 "In PC-BSD 7.01 my USB scanner (Canon LiDE 25) is properly recognized as uscanner0, but the device permissions are not right. While I can use the scanner by starting skanlite as root, when I start skanlite as a normal user, I get an error message that no scanners were found. That's because the user doesn't have read/write permissions to /dev/uscanner0. Adding {{{ add path uscanner[0-9]* mode 0660 group operator }}} to /etc/devfs.conf should fix that." lme 161 usb keyboard intermittant failure System Configuration 8.0-ALPHA System Defect kris closed 2009-01-20T07:16:41-08:00 2009-10-08T08:48:39-07:00 "I just installed pcbsd 7.0.2 today The usb keyboard stops working after a few minutes of idle time. Paul Schenker " psx 164 Cannot switch to new session in KDE System Configuration 7.0-DEV System Defect closed 2009-05-07T09:44:23-07:00 2009-06-13T13:08:06-07:00 yerenkow 166 Wine program dir is duplicated System Configuration 7.0-DEV System Defect closed 2009-05-07T09:49:06-07:00 2009-06-13T12:16:26-07:00 "one ""wine"" contains installed programs; other contains ""winecfg"", etc. I think second should be renamed to something like ""Wine Configuration""" yerenkow 174 Problem sending data to printer System Configuration 7.0.2 System Defect closed 2009-08-21T19:31:18-07:00 2010-07-07T07:54:16-07:00 "I have PCBSD latest version, it was installed a month ago. I am new on PCBSD but not with computers with 38 years experience. I have a HP LaserJet 1018 printer Using hp-check -t the printer is found and correctly identified. Using the hp management software I can send the fermware to the printer and see the result on the printer, but when I try a test page or try to print a document nothing is printer HELP" rfalanga 188 Cannot install PC-BSD using only the first CDs System Configuration 7-BETA1 System Defect closed 2009-12-13T05:34:45-08:00 2010-07-07T08:26:34-07:00 "I have been unable to install PC-BSD 7.1.1 on a Virtual Box VM (running on top of a Pentium 4 2.4GHz with 2.5GB of RAM running Mandriva Linux Cooker ) either from the first CD or both the first and second CD. It keeps asking me for the next CD with only an ""OK"" button and if I don't give it this CD, then the installation needs to be aborted, and the installed partition is left at an unusable state. As far as I recall, no installation of any Linux distribution I tried ever required more than one essential CD, and could always finish with just one CD, including today, so I think PC-BSD should follow suit, and not require more than one CD for installation. I realise that if you make your software more idiot-proof, then nature will come up with better idiots, but eventually you can deal with a large number of complaints by eliminating many common stumbling blocks: http://www.joelonsoftware.com/articles/customerservice.html Regards, -- Shlomi Fish" shlomif 224 No audio output after PC-BSD 8.0 Install (Solved!) System Configuration 8.0-BETA System Defect kris closed 2010-01-26T18:45:23-08:00 2010-04-10T18:53:48-07:00 "After installing PC-BSD 8.0 beta, I lost all audio output. The system does see the sound card. The KDE info center gives the following data: Free BSD audio driver (new PCM 32 bit 2009061500/i386) Installed devices: pcm0: at io Oxfebff800, Oxfebff400, irq 17 bufsz 16384 kld snd ich [MPSAFE] (1p:4v/1r:4v channels duplex default) My system is a custom one with an Intel D845GRG2 mother board, an Intel 3.0 GHz P4 processor with 1 GB of RAM, an nVidia GeForce 6200 AGP video card, and a 400 GB IDE hard drive, if that matters. Please let me know if I can work with you on this issue, and thanks. " wmichaelb 237 Install DVD fails on ICH6 disk controller System Configuration 8.0-BETA System Defect closed 2010-02-04T16:37:42-08:00 2010-02-06T06:43:46-08:00 "Steps to reproduce: 1. Download PC-BSD http://www.pcbsd.org/content/view/143/11/#DVD 2. Create a new disk (here: in a virtual machine) 3. Fire up the machine, booting from the above DVD. Here: VirtualBox, using an ICH6 ATA Controller Result: The OS loader works. A short time later, the boot process complains something along ""Boot media not found"" While I can switch the virtual machine to use an PIIX3 controller (which works), my not-so-recent real hardware has an ICH9 controller. I expect PC-BSD to fail there as well. Screenshot attached." Traumflug 243 Can't set display resolution beyond 1024x768 pixels System Configuration 8.0-BETA System Defect closed 2010-02-08T10:40:46-08:00 2010-02-09T06:43:36-08:00 "As discussed on the support mailing list (no archive?), Xorg doesn't let me set my monitor resolution beyond some imaginary barrier, which happens to be at 1024 pixels wide, 768 pixels high. Display setup (""7"" at the OS loader menu) offers me those higher resolutions, but doesn't manage to tell Xorg to actually use them. Here's my xrandr output, after manually adding the optimum resolution: {{{ $ xrandr Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 76.0* 800x600 73.0 640x480 73.0 1152x864 LG (0x105) 108.0MHz h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz v: height 864 start 865 end 868 total 900 clock 75.0Hz }}} This 1152 pixel resolution shows up in KDE's display settings panel as well, but KDE fails to actually set it either. Attached /var/log/Xorg.0.log as found right after desktop startup." Traumflug 245 Highpoint Rocket Raid System Configuration 8.0-RC System Defect closed 2010-02-08T22:14:48-08:00 2010-07-07T07:57:49-07:00 My old system is a Abit Max2 board with a HighPoint HP374 Raid Controller aka (RocketRaid 133), with two WDC 40G IDE Harddrives on seperate channels, RAID 0. I've also had FreeBSD 8.0 installed before trying to install PCBSD. I've double checked the HCL and HighPoint controllers are supported. However, I have not been able to install PCBSD 8.0RC, the install seems to go through with the disk manager detecting the array as ar0, however upon completion after rebooting the RAID controller states the array is broken and will not boot. I've tried with PCBSD 7.1 and had the same error, if this helps. kupkake191 256 "Operational Bugs Found for variant ""64-bit PCBSD-8, RC-2""" System Configuration 8.0-BETA System Defect closed 2010-02-18T21:12:19-08:00 2010-07-08T07:51:15-07:00 "EXISTING BUG UPDATE PRIOR BUG : PBI downloads disappear when installed from the ""Update Manager"" but will install from the www.pbidir.com (Further to closed Bug Report #252). Chris had sent me notification about a fix for this. I wasn't sure what to do with the fix commands sent (see below), so I do not know if it resolved, or not. Instructions sent were : # svn co svn://svn.pcbsd.org/pcbsd/trunk/SoftwareManager # cd SoftwareManager # qmake-qt4 *.pro # make install (as root) I wasn't sure what ""SVN"" is so couldn't try it etc. These commands didn't seem to run in a terminal window either - - - * NEW BUGS FOUND 1) I have noticed that PCBSD-8 KDE will stack commands due to several mouse / key pushes. Then the system can get loaded up with numerous open Apps commands and then jam up. PCBSD-7 was a little like this too, but it seemed better as it evolved - - - Suggestions to resolve this issue : a) All apps check to see if they are already loaded before another is allowed to load too (user is advised or asked etc). This will help to stop it getting slow - PCBSD shouldn't do that ! b) As a possible improvement, while an App is loading user mouse inputs etc should be canceled unless that window is out of sight or has completed loading etc etc. This area needs a lot of thought because it could backfire, preventing the machine from being used - - - somewhere there is a happy medium in all of this. Any Operating System has to be geared to protect itself against ""User Enthusiasm"" ! 2) PCBSD-8 is still locking up on Firefox download slows. Cannot use the machine for anything else while its locked, even on a dual-core machine. H-m-m-m-m - - - ?? This even effects the mouse response quite often - frustrating because the mouse won't always do the same thing (this is really chronic on the 32-bit variant). 3) KDE keeps asking me if it can ""FORGET"" various sounds devices. I always said no over the last few weeks but I slipped up tonight and said YES. Now the sound system won't work and there is no way to get it back up again. H-E-L-P !!! 4) During boot I tried ""Safe Mode"" to try to fix Bug 3), above and it went very strange. (This happens just after the early, text-based Boot choices menu). The screen it arrives at has the prompt "">MOUNTROOT"" at the end of it, so you can recognize it. The instructions on this screen are vague. - What would we do to use those instructions ? - are they worth using? And - is there actually a safemode there somewhere, to use ? 5) The mouse wheel inputs are still a bit unstable, particularly when pushing the system at high speeds. For example, it will go back to a previous Firefox browsing window when the mousewheel is moved too quickly etc. A mouse wheel push can have this window backing-up effect, too. Far better than it was in Beta but still noticeable - - - * Good luck with these Bugs ! Thanks in advance Ken * * *" GeeKen 257 could not do upgrade from 7.1.1 to 8.0-RC2 System Configuration 8.0-RC2 System Defect closed 2010-02-18T21:14:34-08:00 2010-07-07T07:55:36-07:00 I don't know what went wrong but when I chose to upgrade from 7.1.1 to 8.0-RC2 after reboot the error I got was '''could not mount root'''. I did not know what to do, so I did a fresh install and then it installed and detected ok. I tried both from live DVD and directly choosing the default which is to start the installer from the beginning at boot up. nu2pcbsd 258 Is this KDE bug? System Configuration 8.0-RC2 System Defect closed 2010-02-18T22:29:37-08:00 2010-07-07T13:28:28-07:00 From Dolphin I did view hidden files and then the system became unusable. Nothing would open when I clicked on it. The PC became slow noticeable through the slow movement of the mouse. nu2pcbsd 260 KDE settings missing after upgrade to RC2 System Configuration 8.0-RC2 System Defect closed 2010-02-19T09:14:59-08:00 2010-02-19T09:36:26-08:00 "After upgrading from 8-BETA to 8-RC2 all my KDE settings were gone and my home has these dirs / links lrwxr-xr-x 1 root wheel 5 May 26 2009 .kde@ -> .kde4 lrwxr-xr-x 1 engels engels 5 Nov 10 22:15 .kde.preUpgrade@ -> .kde4 drwxr-xr-x 4 engels engels 512 Feb 18 23:46 .kde4/ drwxr-xr-x 4 engels engels 512 Dec 28 09:21 .kde4.preUpgrade/ Why is kde.preUpgrade a link to .kde4?" lme 261 Disk name changes (ad1->ad10) after upgrade System Configuration 8.0-RC2 System Defect closed 2010-02-19T09:24:11-08:00 2010-02-19T09:49:17-08:00 "After upgrading from 7.1.1 to 8-RC2 the disk name of my hard disk changed from ad1 to ad10 resulting in an unbootable system until I corrected the entry in /etc/fstab. My proposal is that /etc/fstab entries should use glabel." lme 281 KeyBoard Caps Lock Key inoperable System Configuration 8.0-BETA System Defect closed 2010-03-16T02:21:56-07:00 2010-07-08T08:05:38-07:00 "With PC keyboards, from memory, the Caps Lock LED is turned on by the CPU, to show that it has detected that Caps Lock was requested. This bug is that Caps Lock is not working since installing PC-BSD 8. Maybe the FreeBSD kernel is not running the Caps Lock routine. I have tried several Keyboards and the bug is the same - still no Caps Lock function. The ""Caps Lock"" LED does not come on, by the way. Thanks" GeeKen 282 Sound Devices Bugs System Configuration 8.0-BETA System Defect closed 2010-03-16T02:32:08-07:00 2010-06-28T07:41:40-07:00 "Sometimes PC-BSD-8 can't find the Sound Systems ""DevA"", on Boot. As a result, the sound system won't function. This happens rarely but the developers should know about it. Also, as a separate Bug, KDE keeps asking to disregard unused Sound Devices after Boot. If I answer ""Yes"" to this misleading question, the Sound system is turned off permanently. This question should be able to be answered ""Yes"" to without sound system cancellation. This is not what it says on the tin and it is disruptive. This system check needs to be thought through and rewritten. Just turning the sound system off is undesirable. Such a command should be the subject of prior user quizzing : ""Do you really want to disconnect the sound system ? "" This bug happens on about every second Boot. Thanks * * * " GeeKen 283 FireFox 3.6 Crashes System Configuration 8.0-BETA System Defect closed 2010-03-16T02:51:04-07:00 2010-07-08T08:07:26-07:00 "'''FF 3.6 runs great but sometimes crashes.''' == '''' == See crash data below, most recent first. The third one was after a video download. '''FF CRASH #1 DATA''' Output logged from stdout ========================= Killed Output logged from stderr ========================= :1: error: unexpected character `\225', expected keyword - e.g. `style' (process:2773): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:2773): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:45994): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:45994): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:46242): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:46605): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81b4f9ae0 is no longer valid! (process:46732): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:53418): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x811f1c1d0 is no longer valid! (process:53547): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:69874): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:69874): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:74706): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:74835): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:74835): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:83258): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x8181e1960 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:92618): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:92618): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:94056): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:94578): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:95117): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:95648): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:95690): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:95715): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:95940): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:96022): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:96369): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:5056): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x8165da7c0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x8161e3f90 is no longer valid! (npviewer.bin:5056): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81b4312a0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81b43e590 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81bd1ad20 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81e828600 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:39420): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:39420): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81bb9aab0 is no longer valid! (process:45148): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:48814): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Connection closed (process:48926): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81c3ea9e0 is no longer valid! (process:49087): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81edaa0f0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81ecd98a0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81ecd90a0 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPP_New() wait for reply: Message timeout (process:59724): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:59724): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' npviewer.bin: ../src/npw-rpc.c:1190: do_send_NPObject: Assertion `npobj_id != 0' failed. *** NSPlugin Wrapper *** ERROR: NPN_ReleaseObject() get args: Message timeout *** NSPlugin Wrapper *** ERROR: NPP_Destroy() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2164):invoke_NPP_NewStream: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2120):invoke_NPP_URLNotify: assertion failed: (rpc_method_invoke_possible(plugin->connection)) (process:59852): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81bb9a2d0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81b397350 is no longer valid! (process:60193): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x8127c0920 is no longer valid! (npviewer.bin:60193): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Viewer *** WARNING:(../src/npw-viewer.c:1017):invoke_NPN_InvalidateRect: assertion failed: (rpc_method_invoke_possible(g_rpc_connection)) *** NSPlugin Viewer *** WARNING:(../src/npw-viewer.c:1017):invoke_NPN_InvalidateRect: assertion failed: (rpc_method_invoke_possible(g_rpc_connection)) *** NSPlugin Viewer *** WARNING:(../src/npw-viewer.c:1017):invoke_NPN_InvalidateRect: assertion failed: (rpc_method_invoke_possible(g_rpc_connection)) *** NSPlugin Viewer *** WARNING:(../src/npw-viewer.c:1017):invoke_NPN_InvalidateRect: assertion failed: (rpc_method_invoke_possible(g_rpc_connection)) *** NSPlugin Viewer *** WARNING:(../src/npw-viewer.c:1017):invoke_NPN_InvalidateRect: assertion failed: (rpc_method_invoke_possible(g_rpc_connection)) *** NSPlugin Viewer *** WARNING:(../src/npw-viewer.c:1017):invoke_NPN_InvalidateRect: assertion failed: (rpc_method_invoke_possible(g_rpc_connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) (process:68285): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:68285): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x822550b70 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:90336): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:90336): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81c65c980 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x820fa6420 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x820fa6c20 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x820fa6ae0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81f0a6be0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x82248fb30 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81ce9edd0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) (process:94637): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x807daf4f0 is no longer valid! *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() wait for reply: Message timeout (process:95873): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:95873): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' (firefox-bin:2427): Gtk-CRITICAL **: gtk_text_buffer_get_insert: assertion `GTK_IS_TEXT_BUFFER (buffer)' failed (firefox-bin:2427): Gtk-CRITICAL **: gtk_text_buffer_get_iter_at_mark: assertion `GTK_IS_TEXT_MARK (mark)' failed (firefox-bin:2427): Gtk-CRITICAL **: _gtk_text_layout_get_block_cursor: assertion `layout != NULL' failed (firefox-bin:2427): Gtk-CRITICAL **: gtk_text_layout_get_cursor_locations: assertion `layout != NULL' failed (firefox-bin:2427): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed (firefox-bin:2427): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed (firefox-bin:2427): Gtk-CRITICAL **: gtk_text_buffer_get_insert: assertion `GTK_IS_TEXT_BUFFER (buffer)' failed (firefox-bin:2427): Gtk-CRITICAL **: gtk_text_buffer_get_iter_at_mark: assertion `GTK_IS_TEXT_MARK (mark)' failed (firefox-bin:2427): Gtk-CRITICAL **: _gtk_text_layout_get_block_cursor: assertion `layout != NULL' failed (firefox-bin:2427): Gtk-CRITICAL **: gtk_text_layout_get_cursor_locations: assertion `layout != NULL' failed (firefox-bin:2427): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed (firefox-bin:2427): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed *** NSPlugin Wrapper *** ERROR: NPP_WriteReady() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2391):invoke_NPP_Write: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2236):invoke_NPP_DestroyStream: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2120):invoke_NPP_URLNotify: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81c4cb650 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81b7361d0 is no longer valid! (process:97180): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) (npviewer.bin:97180): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\225', expected keyword - e.g. `style' *** NSPlugin Wrapper *** ERROR: NPP_WriteReady() wait for reply: Message timeout *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2391):invoke_NPP_Write: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2236):invoke_NPP_DestroyStream: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2120):invoke_NPP_URLNotify: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x8241a09d0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x8241a0840 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x81d4f9b30 is no longer valid! (process:97909): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPObject 0x814f60bd0 is no longer valid! *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) Locale: ""en"" (2809) KIconCache::Private::themeDirsChanged: Theme directory has been modified ''' # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # '''FF CRASH #2 DATA - this may have been from FF-3.5.7 '''''' Output logged from stdout ========================= Segmentation fault Output logged from stderr ========================= :1: error: unexpected character `\30', expected keyword - e.g. `style' (process:2620): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:2620): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\30', expected keyword - e.g. `style' Locale: ""en"" (12313) KIconCache::Private::themeDirsChanged: Theme directory has been modified ''' # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # '''FF CRASH #3 DATA - this may have been from FF-3.5.7 '''''' Output logged from stdout ========================= [General] ----player thread: Movie downloaded Killed Output logged from stderr ========================= ? :1: error: unexpected character `\17', expected keyword - e.g. `style' (process:6191): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** ERROR: NPP_New() wait for reply: Message timeout (process:8362): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (process:8803): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPP_New() wait for reply: Message timeout (process:49932): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) (npviewer.bin:49932): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\17', expected keyword - e.g. `style' (firefox-bin:3427): Gtk-CRITICAL **: gtk_text_buffer_get_insert: assertion `GTK_IS_TEXT_BUFFER (buffer)' failed (firefox-bin:3427): Gtk-CRITICAL **: gtk_text_buffer_get_iter_at_mark: assertion `GTK_IS_TEXT_MARK (mark)' failed (firefox-bin:3427): Gtk-CRITICAL **: _gtk_text_layout_get_block_cursor: assertion `layout != NULL' failed (firefox-bin:3427): Gtk-CRITICAL **: gtk_text_layout_get_cursor_locations: assertion `layout != NULL' failed (firefox-bin:3427): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed (firefox-bin:3427): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed (firefox-bin:3427): Gtk-CRITICAL **: gtk_text_buffer_get_insert: assertion `GTK_IS_TEXT_BUFFER (buffer)' failed (firefox-bin:3427): Gtk-CRITICAL **: gtk_text_buffer_get_iter_at_mark: assertion `GTK_IS_TEXT_MARK (mark)' failed (firefox-bin:3427): Gtk-CRITICAL **: _gtk_text_layout_get_block_cursor: assertion `layout != NULL' failed (firefox-bin:3427): Gtk-CRITICAL **: gtk_text_layout_get_cursor_locations: assertion `layout != NULL' failed (firefox-bin:3427): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed (firefox-bin:3427): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed *** NSPlugin Wrapper *** ERROR: NPP_New() wait for reply: Message timeout (process:51515): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1924):invoke_NPP_SetWindow: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:2534):invoke_NPP_HandleEvent: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) (npviewer.bin:51515): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\17', expected keyword - e.g. `style' *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** WARNING:(/usr/ports/www/nspluginwrapper/work/nspluginwrapper-1.2.2/src/npw-wrapper.c:1855):invoke_NPP_Destroy: assertion failed: (rpc_method_invoke_possible(plugin->connection)) *** NSPlugin Wrapper *** ERROR: NPP_New() invoke: No child processes (process:52035): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (npviewer.bin:52035): Gtk-WARNING **: Unable to locate theme engine in module_path: ""qtcurve"", :1: error: unexpected character `\17', expected keyword - e.g. `style' Locale: ""en"" (5438) KIconCache::Private::themeDirsChanged: Theme directory has been modified ''''''# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # '''* end of current FF crash reports *''' On another FF issue, there's is still the problem of FF waiting for ""other servers"" during download (typically Yahoo add/cookie servers). While it is waiting FF is halted and cannot be used to view other ""already opened"" tabs / windows. This is really frustrating as it can lock up for upto a minute, at times. This may be a FF design issue ?? Thanks in advance * * *" GeeKen 284 Mouse Wheel unstable in BCPSD-8, keyboard too. System Configuration 8.0-BETA System Defect closed 2010-03-16T02:56:36-07:00 2010-07-08T05:47:04-07:00 "The mouse handling has greatly improved since 8-RC1. Its still noticeably nervous. The main problem is that when the mouse wheel button is clicked it tends to make FF go back a screen - very disconcerting. There is no Mouse Button command in ""System Settings>Mouse/Keyboard"" with which to adjust this function. Thanks in advance Ken Gibbs * * *" GeeKen 292 Caps Lock confusingly mapped to Ctrl by default System Configuration 8.0 System Defect closed 2010-04-23T16:26:37-07:00 2010-04-26T07:20:10-07:00 "By default for the US locale, pc-sysinstaller sets the nocaps option on the generated kxkb configuration file in the user home directory skeleton which turns Caps Lock into Ctrl. While old-time Sun Type 5 keyboard users probably appreciate this, it is unexpected behavior for most users who expect Caps Lock to operate as it always has on PCs. Please remove the kxkb option settings from pc-sysinstaller and offer 'us-sun' as an alternative locale for people who want the Caps/Ctrl swap prior to first login. The offending configuration happens in pc-sysinstall/backend/functions-localize.sh. The settings can be changed on a per-user basis in the Regional & Language -> Keyboard Layout panel, which is non-obvious since there are other keyboard configuration top level categories. " dwhite 301 latest alpha (04.2010) have incorrect libpng version System Configuration 8.0-BETA System Defect closed 2010-05-18T02:31:28-07:00 2010-05-18T05:54:07-07:00 "... so, PBI's can't be run :( Easily fixing, via copying or linking libpng.so.6 to libpng.so.5" yerenkow 314 Webcam / DVB-T USB stick not usable System Configuration 8.1-RC1 System Defect closed 2010-06-28T00:28:04-07:00 2010-07-06T11:19:00-07:00 "8.1-RC1 ships with webcamd and cuse4bsd installed and loaded by default, which is very good. :) But webcams / dvb devices don't work with the shipped configuration. A normal user needs access rights to the appropriate devices. Attached is a patch for devfs.rules and devfs.conf which sets the permissions. BTW: There's no need to change the group ownership of the devices to ""operator"" when mode 666 is set -- anyone already has full access to the devices. Most DVB devices also need their firmware loaded. Please take a look at http://www.linuxtv.org/downloads/firmware/. It would be good to place all those firmware files in /boot/modules where webcamd expects them (and knows by itself which firmware to load). " lme 319 Disable some listening ports System Configuration 8.1-RC1 System Defect closed 2010-06-28T05:00:03-07:00 2010-06-28T09:59:59-07:00 "By default syslog, ntpd and Xorg listen for remote connections. This is unneccessary for a desktop system and could cause security problems. To close the listening ports do the following. syslog: syslogd_flags=""-ss"" in rc.conf Xorg: ServerArgsLocal=""-nolisten tcp"" in /usr/local/kde4/kdm/kdmrc ntp: sync with FreeBSD's stock ntp.conf which was added some time ago and add restrict 127.0.0.1 restrict ::1" lme 327 Monitor loses signal after locking screen System Configuration 8.0 System Defect closed 2010-07-14T18:29:43-07:00 2012-01-26T12:10:32-08:00 After locking the screen, my monitor loses signal from the machine. I've got it hooked up via analog. To try to get a signal, I've moved the mouse, punched keys, turned on/off the display, and unplugged vga cable. yuletak 342 portjail loses new users System Configuration 8.1 System Defect closed 2010-08-11T04:44:18-07:00 2012-04-05T10:20:02-07:00 When one installs a new port inside the portjail which also adds a new user/group to run (e.g. net-mgmt/nagios) this user and group gets deleted when the portjail is restarted because /etc/{passwd,group} is copied over from the host system. lme 352 Screen resolution and broken packages in 8.2 Beta 1 System Configuration 8.1 System Defect closed 2010-12-22T18:14:29-08:00 2012-01-26T12:19:26-08:00 "I tried out the 64 bit of PC-BSD 8.2 Beta 1 and had to delete it off my hard drive. I could not get a higher monitor resolution than 1024 x 760. Not good for a 64 bit version. Also when trying to add K3b from the packages it kept stating download failed. Not good either. When is this going to be fixed? It was never a problem in 8.1. The only problem I had with 8.1 was the inability to get wireless internet. THANK YOU for your time and understanding" harleyrider1958 354 "Handbook issue in ""Writing an IMG File to Flash media"" page" System Configuration 8.1 System Defect closed 2011-01-03T06:42:15-08:00 2011-12-23T10:16:23-08:00 "There are 2 minor changes I'd like to propose to the ""Writing an IMG File to Flash media"" page of the handbook: #1 The specified command to write a USB image is as follows: {{{ dd if=PCBSD8.1-x86-USB-bootonly.img of=/dev/da0 bs=5k }}} How this seems to consistantly end in a write error. I am able to write the image successfully with the following change: {{{ dd if=PCBSD8.1-x86-USB-bootonly.img of=/dev/da0 bs=1M }}} I do not understand why either should not work. Perhaps this is a specific problem with my hardware. Has anyone else noticed this? #2 The first sentence on the page says: {{{ If you selected to download a ""Boot only USB for network & internet installs"" .img file, you can write the image file to a flash card or removable USB drive using the built-in dd command line utility on a BSD or Linux command system. }}} But should maybe be changed to include any USB image: {{{ If you selected to download a ""USB"" .img file, you can write the image file to a flash card or removable USB drive using the built-in dd command line utility on a BSD or Linux command system. }}} " segfault 386 Sliders don't move in the Input Device Preferences control panel under LXDE spin System Configuration 9.0-BETA1 System Defect closed 2011-09-09T14:41:12-07:00 2011-09-12T09:47:19-07:00 "Procedure: Go to system -> control panel -> ""input device preferences"". Expected result: I can adjust the slider settings for both the keyboard and mouse. Actual result: The acceleration and sensitivity for both panels are set to 0 and I can't change them. Notes: - PCBSD 9.0BETA-1.5 - LXDE spin - xterm output: The terminal says (had to truss pc-controlpanel to get the actual command): $ /usr/local/bin/lxinput (lxinput:57812): Gtk-WARNING **: Failed to get constuct only property adjustment of mouse_accel with value `mouse_accel_adj' (lxinput:57812): Gtk-WARNING **: Failed to get constuct only property adjustment of mouse_threshold with value `mouse_threshold_adj' (lxinput:57812): Gtk-WARNING **: Failed to get constuct only property adjustment of kb_delay with value `kb_daley_adj' (lxinput:57812): Gtk-WARNING **: Failed to get constuct only property adjustment of kb_interval with value `kb_interval_adj' This should be isolated as either a PCBSD package or a generic FreeBSD package issue and potentially be pushed back to the FreeBSD maintainer and/or the LXDE folks." gcooper 388 "Can't uncheck ""Enable Firewall on startup""" System Configuration 8.1 System Defect closed 2011-09-09T14:50:42-07:00 2011-09-28T11:34:50-07:00 "- Go to ""Control panel"" -> ""Firewall manager"". - Enter in credentials. - Uncheck ""Enable firewall at startup"". Expected result: - Box should be unchecked. - pf should be disabled. Actual result: - Box is still checked. - pf is still enabled." gcooper 503 VirtualBox Guest - Need To Click The Mouse Several Times System Configuration 9.0-RELEASE System Defect closed 2012-01-28T14:05:19-08:00 2012-07-26T08:13:09-07:00 "Under this ticket; https://trac.pcbsd.org/ticket/502 I also have to typically click the mouse 2-3 times before it responds to an action. Mouse support isn't working properly. I'm using a USB mouse... This is the output from /var/log/messages for the mouse; Jan 28 10:39:11 slkbxin kernel: usb 2-1: Manufacturer: Logitech Jan 28 10:39:11 slkbxin kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.0/input/input8 Jan 28 10:39:11 slkbxin kernel: generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input0 Jan 28 10:39:11 slkbxin kernel: generic-usb 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input1 THANKS" DasFox 590 Blank screen after selection of ATI video driver. System Configuration 9.0-RELEASE System Defect joshms closed 2012-02-27T15:53:44-08:00 2012-08-17T12:33:14-07:00 "I'm listing this as an installation problem because the system can't recover from an incorrect video selection, and because the boot options for trying to activate the VESA driver on startup don't work. I've tried re-installing PC-BSD a few times, but can't get past selecting the video card after reboot. No matter what resolution or card I select, I have the same problem. PC-BSD installs fine. It starts out fine. Right away, it comes up and it asks you to select a video driver. It thinks I have an ATI 4500 HD series card. I've picked a resolution I know I’ve used on Windows with it, then later just tried 1024x768. I click OK. It tells me, ""If you don’t see anything for a few seconds, I’ll switch back to the old settings automatically. And then the screen goes blank. And then the screen stays blank. Five minutes later, I reboot the computer. And the screen boots up blank. I don't press any keys or click any mouse buttons, but the screen never comes back. Okay, I think. I’ll just boot it with the VESA driver, which is an option in the boot menu, and fix the display settings. Only, it won’t boot to the VESA driver. I toggle it on, I toggle on safe mode. I try all sorts of toggles over and over again, but every single time, it tries to boot with the normal settings, and I boot to a blank screen. The video card has both an HDMI port and VGA port. My monitor is plugged into the VGA port. Thanks!" tbj 595 rc.conf and wpa_supplicant.conf gets corrupted on configuring network via UI System Configuration 9.0-RELEASE System Defect kenmoore closed 2012-03-18T00:41:54-07:00 2012-07-09T10:10:25-07:00 "Reported on the forum for 9.0 beta: http://forums.pcbsd.org/showthread.php?t=15063 the problem still persists. I had one working wireless entry and wanted to make another for an other network when confronted with the issue again. Its a serious defect for those who knows little about computers and/or FreeBSD in general." tinca 596 automatic handling of wifi in Dell Inspiron 1545 System Configuration 9.0-RELEASE System Defect closed 2012-03-18T00:48:10-07:00 2012-03-28T13:17:36-07:00 "I reported the issue in detail here: http://forums.pcbsd.org/showthread.php?t=16419 This existed and was reported in 9.0 beta too." tinca 636 PCBSD RC1 Fails to install via External DVD Drive System Configuration 9.1-BETA1 System Defect kris closed 2012-08-21T13:12:06-07:00 2012-09-07T06:24:59-07:00 "Using the newest image of PCBSD RC1 the install stops after about 2 minutes, and asks you to mount a drive. After pressing enter a couple of times a message comes up about Kernel Panic and restarts the computer. Reburned the image a couple of times to make sure it wasn't a fluke with the disc. Using an internal DVD drive this error did not happen. This may or may not be relevant, but keep in mind this was a brand new off the shelf DVD drive from Best Buy. Here are the hardware specs for the external DVD drive I was using: Brand: Gear Head Model: Mobile Slim CDSL11" joshms 645 ASUS Xonar DX (PCI Express 1x sound card) not recongnised System Configuration 9.0-RELEASE System Defect closed 2012-08-29T18:21:41-07:00 2012-09-04T07:26:17-07:00 "I've just installed PC-BSD 9.0 x86 and at the end of the boot time, with all the tex ouput, the kernel shows me a message that says : ""no recognised sound card"" or something very similar. The sound card is an ASUS Xonar DX (PCI Express 1x) and of course, it works under Windows or Linux (tested), but not under FreeBSD 9.0. There's apparently no driver for it. Maybe it uses a PCI-PCI Express bridge and that would be the reason for it to not working? I don't know. I join a file containing some ""lspci -v"" output, I'm not sure that the line containing ""PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)"" is linked to this sound card, but the line containing ""Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]"" is!" Boug 656 Icon graphics missing on restore of desktop System Configuration 9.1-BETA1 System Defect closed 2012-09-11T06:32:38-07:00 2012-10-16T07:08:08-07:00 "KDE Desktop 9.1-RC1 I restore my desktop from a backup and all my icon graphics are missing. That is to say, the applications, which are installed, (ie firefox, k3b, umplayer, etc) have their application name there and I can click on the button and the app comes up, however, each application's graphic for the icon is missing. ??? Is there a way to re-generate which database is keeping track of the icon graphics? " pathiaki 665 Mount tray application does not fully mount second Hard Disc Partitions System Configuration 9.1-RC1 System Defect kenmoore closed 2012-10-03T02:10:58-07:00 2012-10-09T07:00:59-07:00 "I have 2 hard drives attached to my motherboard, both disks are listed in the file manager and in the mount tray application on the taskbar. However only the the partitions on the PCBSD slave drive are listed in the media directory. The master drive contains Linux Partitions (and installations) and is not listed in the media directory. Thus when clicking on any icon for a partition the Non-PCBSD master disk (in say Dolphin) , the error ''An error occured while accessing xxxx Hard Drive, the system responded, org.freedesktop.hal.device.volume.unknownfailure:mount: /dev/ada0S3: Operation not supported by device'' Other external media connected via USB such as mp3 players are accessed just fine. It may also be worth mentioning that the PCBSD Hard Drive also has a working Windows installation on it (all partitions are accessible). The second drive that is inaccessible has 3 Linux distributions on it and a back up ext4 partition. It maybe worth noting that I installed PCBSD to the slave drive with the Master Drive disconnected from the motherboard." Dante77 666 PC-BSD 9.1 RC1 (and 9.0 stable) Won't Recognize GeForce 8400 System Configuration 9.1-RC1 System Defect closed 2012-10-07T13:00:17-07:00 2013-03-08T10:12:56-08:00 "In a nutshell, I'm trying to boot the 9.1 RC1 install DVD; it's one I picked up at the Ohio Linux Fest at the BSD booth. I've tried two different mother boards and two different cards in the nVidia 8400GS series. One is by MSI and one by ASUS. The board layouts are different. A GeForce 200 series on another machine works fine, so it seems unique to this series. The system correctly identifies either card as nVidia, and then loads the nVidia driver. But when X starts up, the screen goes to a mish mash of colored squares and jagged patterns. Selecting the VESA driver at startup generates exactly the same result, so it may not be the nVidia driver itself. Kernel? Installer? " wmichaelb 668 Kernel Panic at Boot on Intel Mother Boards System Configuration 9.1-RC1 System Defect closed 2012-10-07T13:18:45-07:00 2012-10-08T13:09:03-07:00 "When I try to boot either PC-BSD 9.0 stable or 9.1 RC1 after what seems to be an uneventful installation on either one of two Intel mother boards, the system panics at: ZFS file system version 5 ZFS pool storage version 28 panic: no usable event timer found! cpuid=0 KDB backtrace:#0 0xffffffff809205 at kdb_backtrace+0x66 #1 0xffffffff808ed55e at panic+0x1ce #2 0xffffffff80c3baec at CPU_init_clocks_bst+0x3bc #3 0xffffffff8054bcf7 at mi_startup+0x77 #4 0xffffffff802b4fec at btext+0x2c uptime: 1 sec Reboot.... In both cases, the install DVD loads and runs what seems to be flawlessly. The boards in question are: Intel D945PSN - Bios:SN94510J.86A.0108.2008.0817.1811 Intel DP965LT(B) - Bios MQ96510J.86A.1761.2009.0326.0001 Both systems are 3.0 GHz Pentium D's; one has 2GB and one has 4GB. As a test, I successfully installed, booted, and ran FreeBSD 9.0 server and Puppy Linux 5.2 on both, so the hardware seems ok. I've tried multiple HD's, including a brand new 500GB SATA, and multiple install disks, including one distributed by PC-BSD. I updated the BIOS on the older board, but to no avail. Power supplies are new 500W units with 3-year warranties and different brands. The result was the same for both 9.0 stable and 9.1 RC1. The 9.0 install disk works well on a newer Socket 775 ASUS mobo, but I haven't tried 9.1 on that machine. " wmichaelb 672 USB live image assumes root is /cdmnt System Configuration 9.0-RELEASE System Defect closed 2012-10-10T03:21:17-07:00 2013-03-08T10:11:12-08:00 "I'm booting PC-BSD 9.0 from a USB stick. When I try to load kernel modules (e.g. when I try to start gssd so that NFS+Kerberos can work its magic), the system can't find its modules. This is because /boot/modules is a symlink to /cdmnt/boot/modules, but when running from a USB stick, it ought to be a symlink to /mntuzip/boot/modules." trombonehero 680 pc-thinclient doesn't work on 9.1-RC*. System Configuration 9.1-RC2 System Defect closed 2012-11-01T08:39:18-07:00 2013-03-08T10:08:16-08:00 "Tried performing the pc-thinclient script as a desktop on RC1 and RC2. Each time, it got hung up due to trying to build X. The main reason for this seems to be an issue with the transition from pkg-config to pkgconf and the version checking that goes on. (I could not find this issue mentioned anywhere. I'm going back to 9.0-RELEASE to see if the problem exists there as well.)" pathiaki 685 virtualbox bridged adapter not working since upgrade from 9.0 to 9.1 System Configuration 9.1-BETA1 System Defect closed 2012-12-26T19:33:11-08:00 2013-03-08T10:07:48-08:00 I have been using pcbsd 9.0 and virtualbox ver 4.1.22_OSE r80657 with win xp as a client. Since upgrade from 9.0 to 9.1 last week only NAT adapter works in xp, bridged adapter gives error message 'can't obtain ip address'. All environment settings look normal after upgrade. a&r 694 live image does not contain installer System Configuration 9.1-RELEASE System Defect closed 2013-02-15T04:30:55-08:00 2013-03-08T09:54:20-08:00 The live image does not contain the installer. This is a bug, not an enhancement, because that's what most people expect: try the OS/Distro, and if it's ok, install it. When you add the installer to the live image, link it in the menu and on the desktop. mjollnirpaul 73 generic ugen vs. ulpt printer devices System Configuration 1.3.4 System Enhancement closed 2007-11-13T09:37:52-08:00 2008-05-05T09:54:31-07:00 "I have had a hard time getting an HP 1020 printer to work with PCBSD 1.4. As I understand it HP printers use HPLIP which requires that printers are recognized as generic USB (ugen) devices not ulpt. This is discussed on a site ""KDE on FreeBSD"", ""http://freebsd.kde.org/howtos/hplip.php"" The kernel for PCBSD has the ulpt device enabled. After much work I have been convinced getting around this conflict with PCBSD is beyond my present capabilities. I have been able to recompile the kernel without ugen but I still not get the printer to work. If you care to you can look at my posts on the PCBSD forums. I am not sure how to resolve this conflict with the ugen vs. ulpt devices so I'm reporting it as a bug. It is possible to get these types of printers to work in most Linux distributions using the foo2zjs driver; I've done it several times. In fact this driver is included in the ports package for PCBSD. It only works the first time it is installed and then never after as I have documented." cackerso 92 Printer Auto Detected System Configuration 1.4.1 System Enhancement closed 2008-02-09T11:39:52-08:00 2010-07-07T12:28:01-07:00 "Hi, This time is for better printer installation. I don't know if that is suggest, but my wish is for printers. When the user turn on the printer in the machine, PC-BSD auto-detect that and install. I know this can make by browser and CUPS, but this script make the life more easy for who is using BSD for the first time and don't know what is CUPS. Great Work, even and even better! Thanks." josiaslg 132 KDE-Light custom-config System Configuration 1.5.1 System Enhancement closed 2008-06-18T10:11:44-07:00 2010-07-07T12:28:46-07:00 "So, hi again. This time, is for KDE that is used by pcbsd. A big diference that can have is in the installation, have some window where you can choose what is installed in kde. He have very much mini-applications that i don't use and is more easy check this out in the installation. I think that will make the system more adaptive to people that use pcbsd and others systems and never will use things like kppp, games or stuff like that. In the same way, inside kde, have some frontend that installs ou uninstall that stuff. Is just that by today. Thanks." josiaslg 134 Integrate Wine System Configuration 7.0-DEV System Enhancement closed 2008-07-08T10:37:42-07:00 2009-06-13T12:11:01-07:00 "Hi for all! This time is for integration in PC-BSD and Wine. Many people that never used *nix before like desktop or server ask if have some software that run softwares from microsoft and other companys. So, in Office menu have some wizzard that install OpenOffice suite and other that installs other offices suite. This can be expanded to more softwares, one time that the wine base is the same. This can help who wanted make some pbi of windows programs too, because we will know what version is running in the system base target." josiaslg 183 Mouse acceleration is unintuitive System Configuration 7-BETA1 System Enhancement closed 2009-09-08T03:44:06-07:00 2010-07-07T12:29:17-07:00 "KDE's mouse acceleration is unintuitve, since with it pointer movement aren't linear fundtion from mouse movement. Propose: get rid of it by default. To do so, we need set mouse threshold to 0, and mouse acceleration to 1.2-1.3 Almost no windows users who buys expensive mouse with a lot of buttons and settings use mouse acceleration. If this not convenient, let's start poll about this." yerenkow 244 Removal of unwanted languages System Configuration 8.0-RC System Enhancement closed 2010-02-08T21:14:54-08:00 2010-02-09T06:44:44-08:00 When I install pcbsd, the default language is chosen but languages that I will not be using also get installed and that takes up disk space. Ubuntu has this in setup to remove all other language files that are not needed. nu2pcbsd 333 Boot options disabled System Configuration 8.1 System Enhancement closed 2010-07-23T02:48:42-07:00 2012-01-24T12:07:46-08:00 "Version 8.1 Boot options 5-7 disabled. Up to now after changing the graphics card Xorg could be reconfigured using Option 7 Run The Display Wizard. Not clear what is the idea now, copying ttys.xsetup to /etc/ttys? " bitraptor 487 portjail script improvements System Configuration 9.0-BETA3 System Enhancement closed 2012-01-20T09:11:59-08:00 2012-06-28T08:57:34-07:00 "The following patch improves portjail in the following ways: 1. You can now specify the following items on the command line to tune your portjail experience: a. TARGET:TARGET_ARCH (`uname -p`:`uname -m`). b. The hostname. c. The source directory (in case you don't want to use /usr/src). d. The method for installing a portjail (to avoid having to create scripts to deal with the interactive prompts that are in the current portjail script). e. A destdir option so I can install the jail to an arbitrary location. f. A means for passing in options to make (MAKEFLAGS) I can pass in custom build parameters, including (but not limited to) SRCCONF=/dev/null, -j 8, etc. g. A number of other bits are now tunable via the environment (MANPATH, etc). There are other improvements that could and should be made to this script and 'jailme' (in particular, the architecture and version aren't correct for the jailed system -- I know the solution to this problem), but this seemed like a logical place to checkpoint the work for review purposes. The work is needed to create a deterministic portsjail environment for the FreeNAS 8.2.x plugins effort." gcooper 704 ZFS and heavy resource utilization System Configuration 9.1-RC3 System Enhancement closed 2013-02-17T22:41:21-08:00 2013-03-08T09:55:45-08:00 "PCBSD with zfs has high resource (processing and memory) utilization and has been the target of multiple user complaints on web forums. The canned answer is usually with regard to kernel memory allocation (mem_wire, mem_active, mem_inactive, and mem_cache) for optimal performance and that unused memory is wasted memory. The complaint is not due to kernel maximizing memory allocation, it's with respect to mem_active memory being considerably higher than if a ufs or a Linux ext3 or 4 file system were being used. ZFS has an inherently higher mem_active memory utilization due to the arc algorithm and sha256 checksum operations on hard drive reads. Increasing the zfs cache puts a higher load on mem_active and decreasing zfs cache puts a higher load on the processor, even at idle. This may lead to a certain level of dissatisfaction with regard to system performance and give PCBSD a poor reputation. I've noticed 100mb of mem_active being used on a headless PCBSD/zfs installation, which is far higher than a normal 20mb with ufs. I've also witnessed 50% processor utilization when the system is idle with a core2quad processor. The proponents of zfs stipulate the data integrity advantage it has with respect to ufs, ext4, and fat32. However, the end user may not recognize this, especially with poor performance. A compromise could be if the default pcbsd installation utilized ufs for system partitions and zfs for user data (/usr and /home)." friedg 706 EasyPBI fails (en-freebsd-doc and de-freebsd-doc) System Configuration System Enhancement closed 2013-02-19T07:39:47-08:00 2013-03-11T07:14:47-07:00 "I could not download these as packages with portinstall (??? that's a bad joke) and compiling them from source was a (big) pain, because I had to change PACKAGESITE to use 9-stable (not 9.1-release) manually -- took me a day to find why and how -- and now freebsd-update -IDS says the whole system is out-of-date. You guessed right that I'm not going to update myself and rely on your update-manager. At least I could update the packages shown by portaudit (incl. flashplayer but except for ruby). Plus, these two ports (the docs) are not tender maintained, they depend on chinese fonts (that fail by default and take a lot of attention, seems to be a typical chinese mannerism) although I found no single chinese character in dem docs, man. => Current PC-BSD 9.x shall include a ""Release Notes.txt"" on the desktop and the root fs telling about the hacking of FreeBSD sites in late 2012 and what to do to use packages & ports. => PC-BSD update-manager shall use portaudit internally and update affected ports -- if possible, use packages, if not, try unattended port build. => A local-only MTA shall be enabled by default. Ok the target audience of PC-BSD is the average non-nerd user, I agree w/ that completely, but I guess in realitas it is mostly people already familiar w/ Unix coming from Linux, Solaris, or Mac, or other nerds coming from Windows who like to try BSD. So IMHO the freebsd-doc shall be easily available as packages (not ports) in all translations (split, not all bundled). Then I started EasyPBI to supply the two ports as PBI. It failed. Several questions rise up: I already have a freebsd base system (mostly unchanged) and the src tree (unchanged), why does EasyPBI download them again? => It would be enough to create a snapshot after/during install (I did that manually from within an xterm when the installer prompted me to reboot) that's a good idea anyway because newbies can quickly start over w/ a fresh system after they shot themselfes in the foot. => The same hold true after downloading & extracting src tree. I already built and installed these ports, why does EasyPBI do all that again? It's PDFs and text files that can be copied! => EasyPBI needs to look of what type and where the target files are. How can I make architecture-independant packages and PBIs? I'm definetely not going to do that again for all architectures, it's only data that can be copied. All we have to agree upon is that all-arch packages/PBIs be delivered in network byte order and what to do w/ that is left up to the arch. Then it builds a pre-desktop default system: compile Perl, CUPS, Xorg, TeX etc. pp. -- hopefully this will be saved for the next PBI (why do I need CUPS to create a PDF? I thought GS is enough for that). => If EasyPBI does not save reasonable common stages: it should ask me where to save stages that I might need again and let me start there next time. => Common stages e.g. X11, KDE, LXDE,... could be availabe for download. Maybe that's all a GIGO-problem, because the ports Makefiles are not maintained well (stale or broken dependencies as above, from copy&paste blindly). After all, it takes hours (days?) to make a PBI of files that should be available for download as precompiled package(s), which is not anyone's mistake, but the status quo. Anyway, to say it polite, that's sub-optimal. -- Qt conversation started. Qt conversation finished. Getting regional mirror... Using mirror: http://www.mirrorservice.org/pub/pcbsd Fetching FreeBSD chroot environment... This may take a while... rel-amd64.txz 91 MB 1501 kBps rel-amd64.md5 33 B 466 kBps src-amd64.txz 92 MB 1104 kBps Creating ZFS /usr/pbi/.pbi-world-amd64 dataset... Extracting rel-amd64.txz... Extracting src-amd64.txz... Cloning /usr/pbi/.pbi-world-amd64 -> /usr/pbi/freebsddocumentation(english)-amd64.chroot cannot create 'tank0/usr/pbi/freebsddocumentation(english)-amd64.chroot': invalid character '(' in name pbi_makeport: Failed creating clean ZFS base snapshot Cleaning /usr/pbi/freebsddocumentation(english)-amd64.chroot" mjollnirpaul 14 Booting up messages System Configuration 1.4-DEV / 1.4-BETA 1.5 System Enhancement Kris closed 2007-08-30T09:20:56-07:00 2008-02-21T11:46:24-08:00 "Kris wrote on 30-Aug to the the testing list: As for the boot process, these are all valid points. I'm going to put this down to investigate for the '''next release'''. We'll just have to figure out if we can add some sort of ""monitoring"" service, which keeps track of the startup, and takes appropriate actions if the load fails. {{{ > > TerryP wrote > >> Also, the bootup process is still screechingly at odds with PC-BSD's great >> work elsewhere at making FreeBSD easier to use. When an install didn't >> work recently because an old non-booting disk drive that was attached to >> the system ""failed"" (as far as I could see, it didn't pass fsck because of >> 1 bad cluster), all the wonderful GUIs and goodness of PC-BSD vanished >> when the bootup process tossed itself overboard at a point when not even >> joe could run because the state of things yet was such that random cursor >> addressing for the screen wasn't working. >> >> The system behaved as if this disk was critical to its operation. That was >> far from true, and an easy-to-use option to bypass it rather than >> struggling against the system's wrong assumptions would have been very >> welcome. Some errors can be addressed much better after the boot disk and >> the system are fully up and operational. Forcing the user to solve such >> problems at a partially effective system prompt with severely limited >> tools is sub-optimal. More than once while this was happening, not only >> that ancient disk but the main boot disk too were marked read-only and not >> even root could edit the necessary files to get around it. >> >> Some useful messages (understandable to the average person) about how to >> bypass this kind of thing are fairly nonexistent in FreeBSD's bootup >> process. It would be very helpful to look through the bootup procedure to >> see what helpful informational messages and screens screens could be added >> at various points, to help new desktop users who aren't Unix gurus when >> bootup falls over and throws PC-BSD on its ear in the mud. >> >> At least, giving the user clearer ways to differentiate between really >> showstopping errors and lesser errors that could be fixed more effectively >> once the desktop GUI system is up, compared to trying to fix things >> partway through bootup using sticks and flint knives, seems desirable if >> at all possible. >> >> -rsc > > I suppose that is a question of how true to the underlaying FreeBSD the > developers wish to stay with what changes they do make. > }}} " gerard 131 Windows Vista boot sector System Configuration 1.5.1 7.0 System Defect closed 2008-05-31T16:35:14-07:00 2008-09-04T11:56:13-07:00 "Hi again, so, is about PCBSD x Windows Vista boot. I show the pcbsd to a friend and he try to install with he's window$ vi$ta. The boot loader from freebsd don't worked, so, i search in some forums and finded something like that. http://www.clearchain.com/wiki/FreeBSD_&_Windows_Vista so, this can be solved in default installation of PCBSD without manually install this boot loaders i think. Thanks." josiaslg 7 Integrate KDE 4.0 System Configuration 7.0 System Enhancement closed 2007-08-13T10:28:54-07:00 2008-09-04T11:47:34-07:00 Integrate KDE 4.0 into the base system. tim 94 Version to Notebook Asus EeePC System Configuration 1.4.1 7.0 System Enhancement yerenkow closed 2008-02-09T19:12:08-08:00 2008-10-20T09:36:05-07:00 "Hi, This suggest affect who using EeePC for home or for school. Here in brazil this kind of product(others like Classmate PC) will be very use (i have on myself) and to install FreeBSD in that, have to make some adjstuments. So, will be more then great if PC-BSD detects this kind of hardware and adjust drivers, kernel and everything else to him. This link show how install and configure to work proprely. http://nighthack.org/wiki/EeeBSD ,but for new users PC-BSD can be a high-quality alternative without modifications maked by new user. " josiaslg 147 kucNFemMbETgVmQgB System Configuration 7-BETA1 7.1 System Defect closed 2008-10-13T15:52:51-07:00 2008-10-15T19:42:37-07:00 "uUGN5f bbtqlrjrnjbd, [url=http://locksoypdhjo.com/]locksoypdhjo[/url], [link=http://ucqlecmllfla.com/]ucqlecmllfla[/link], http://btekdvxdlcqk.com/" drhcxskg 151 cilxNFbvlcQRhu System Configuration 7-BETA1 7.1 System Defect closed 2008-10-19T17:33:44-07:00 2008-10-20T09:37:12-07:00 "r94pZi evpfoqveshwj, [url=http://ktqhcoryrvwe.com/]ktqhcoryrvwe[/url], [link=http://cwzetawamgjt.com/]cwzetawamgjt[/link], http://dkltcngpcmrf.com/" jqtnmspeji 184 "pcbsd7.2 : first boot after install hangs on ""Display Settings""" System Configuration 7.1 System Defect closed 2009-09-19T12:25:35-07:00 2010-07-07T12:15:42-07:00 "Hi, just installed pcbsd on laptop (PCBSD7.1.1-x86-bootonly.iso). When the installation finishes, the pc reboot and a ""Display Settings"" box opens. Whatever I choose, ( my card is a ati rage mobility) the pc freeze. I even tried vga.. or ""skip"" .. no success. I opened a xterm and launch konqueror to ask support. I attach a screenshot and logs. Thanks " OlivierThompson 155 Graphical TTY support by default. System Configuration 7.0.1 7.1 System Enhancement closed 2008-10-22T00:07:32-07:00 2009-06-13T12:27:29-07:00 "Enabling graphical TTY support by default by adding ""options VESA"" and ""options SC_PIXEL_MODE"" to the PC-BSD kernel config file. Also automatically selecting the best (highest) resolution for that specific video-card woould be handy" udragon 180 Non-english version should have layot switching enabled System Configuration 8.0-ALPHA 8.0 System Defect kris closed 2009-09-07T03:27:48-07:00 2009-12-29T09:38:25-08:00 "While installing, we can chose a language of system, like Russian. But it's halfway solution, since created user have only English layout enabled. This should be fixed, for all Languages which are not English, newly created system must have: 1. Layout switching enabled 2. Additional language (besides english) must be added out-of-box And possibly, if this not complicated, we should adjust layouts during install, maybe someone wants third language, and/or specific keyboard shortcut for language switching. " yerenkow 211 FreeBSD installation from PCBSD DVD on zfs root System Configuration 8.0-ALPHA 8.0 System Defect closed 2010-01-05T08:24:01-08:00 2010-01-13T14:31:04-08:00 "hi! i can set in the installer / slice as ZFS, but system can't boot from ZFS slice. Solution1: Add additional check on installer that /boot slice is on UFS filesystem. Solution2: recompile bootblock with ZFS support Solution3: migrate to GPT (gpart) as partition manager. http://lulf.geeknest.org/blog/freebsd/Setting_up_a_zfs-only_system/ Some scripts here http://mfsbsd.vx.sk/ " aplsms 220 New Network System strange behavior System Configuration 8.0-ALPHA 8.0 System Defect kris closed 2010-01-15T10:14:33-08:00 2010-02-01T07:23:38-08:00 "I have such nic: ath0 (which became wlan1) bge0 fwe0 Before I enter some settings, it all creates into lagg0, but only ipv6. I couldn't configure anything. Disable fwe0 and bge0 make my wlan1 find access point, but only in ipv6 - nothing works. " yerenkow 226 Toshiba Satellite ACPI issues System Configuration 8.0-BETA 8.0 System Defect closed 2010-01-28T06:07:48-08:00 2010-01-29T11:17:41-08:00 "Just installed 8.0 Beta on my Toshiba Satellite. Specs: CPU: 1.9 Ghz Athlon X 2. Video: ATI chipset (radeonhd driver) Audio: Intel (sound_hda) Wireless: (Atheros driver) ACPI doesn't work. No suspend / resume. Enabling powerd makes system very slow and produces the message: set freq failed, error 6 Also the laptop runs very hot 60+ C. Other systems run at ~45 - 50C" msherman 227 Ukrainian translation is missed in 8.0 RC System Configuration 8.0-BETA 8.0 System Defect closed 2010-01-28T10:11:57-08:00 2010-01-29T08:57:39-08:00 Ukrainian translation is missed. Only system installer have translation (but not for PBI description). But all pcbsd applications (like software manager, LifePreserver, etc) are untranslated. Translation done and present on pootle2 server. yurkis 229 Boot splash is absent System Configuration 8.0-BETA 8.0 System Defect closed 2010-01-29T10:14:31-08:00 2010-01-29T11:10:44-08:00 Boot splash is not displayed. Possible splash_pcx kernel module is absent (like as in BETA). yurkis 247 Wireless network not connecting in Live mode System Configuration 8.0-RC 8.0 System Defect closed 2010-02-10T12:44:59-08:00 2010-02-22T07:18:57-08:00 "When I boot into live mode from the 8.0RC dvd, it seems not to be able to set the WLAN network-connection active. More details: When I go to systemsettings -> system network configuration, it tells me that it found a new device and if I want to activate it. I click on activate. It shows my WLAN adapter (Intel Pro/Wireless 3945 ABG) and I can configure it, scan for WLAN (I have to click rescan otherwise it doesn't find any network), and can configure network-access. But it seems the device does not set itself active and thereore does not connect to a WLAN. The status is always ""no carrier"". Right-click on the device and choosing ""Enable Device"" or ""Restart network"" don't do anything. " BSDed 248 Missing Network Settings in KDE Start Menu (KDE 4.3.5) on PCBSD 8.0 RC2 System Configuration 8.0-RC 8.0 System Defect closed 2010-02-13T11:18:19-08:00 2010-02-16T09:25:03-08:00 "I found the below instructions in the PC-BSD Users Handbook for configuring network interfaces for internet connectivity. To start configuring your network interface, click the Start Menu in the lower-left corner (red ball) and click ""Settings → Internet & Network → Network Settings"". After installing PC-BSD 8.0 RC2 amd64 on to my Thinkpad T61 laptop, under the ""Settings"" in the Start Menu, I can see only 3 menu items namely, ""GTK Styles and Fonts"", ""Menu Updating Tool"" and ""IBus Preferences"". I could not see the menu items ""Internet & Network"" or ""Network Settings"" under the ""Settings"" in the Start Menu. I also tried searching for them, but could not find them anywhere. Please resolve this issue and/or update the Users Handbook documentation if necessary so that Wireless/Wired Network Configuration can be done easily." yuvaraj.name 249 Unable to adjust brightness of the screen on Thinkpad T61 System Configuration 8.0-RC 8.0 System Defect closed 2010-02-13T11:23:20-08:00 2010-02-16T09:57:30-08:00 The screen brightness adjustment keys on my Thinkpad T61 laptop does not work after installing PC-BSD 8.0 RC2 amd64. yuvaraj.name 254 Kernel panic on Acer Travelmate 6292 System Configuration 8.0-BETA 8.0 System Defect closed 2010-02-16T12:51:10-08:00 2010-07-08T06:38:28-07:00 "Hello! I had tested PC-BSD 8.0 RC2 on my notebook Acer Travelmate 6292 and get following : 1 - no Live Mode 2 - Kernel panic during install system" dvman 255 Duplicate Sound Devices Detected...Sound Not Working System Configuration 8.0-RC2 8.0 System Defect closed 2010-02-17T15:12:33-08:00 2010-03-22T06:57:29-07:00 "Typing ""dmesg | grep pcm"" in konsole shows there are three sets of the same sound card according to PCBSD. KMixer shows two sets of ""OSS Audio"" tabs available--both with ""Front"" and ""PCM"" slide bars. I can individually set the settings for each ""OSS Audio"" tab, but there is still no sound. Sound was available during the PCBSD7 series." fitzlt 264 Power Management related alert upon logging in System Configuration 8.0-RC2 8.0 System Defect closed 2010-02-19T21:13:20-08:00 2010-02-22T09:41:15-08:00 "I get the following alert message whenever I log into my Thinkpad T61 laptop running on PCBSD 8.0 RC2 amd64. Power Management The profile """" has been selected, but it does not exist. Please check your PowerDevil configuration. " yuvaraj.name 304 PC-BSD i386 8.0 does not create correct device fot logical NTFS-partition in catalog /dev System Configuration 8.0 8.0 System Defect klnW closed 2010-05-28T07:13:46-07:00 2012-01-26T12:36:30-08:00 In my computer there is logical NTFS-partition on whole second HDD. So PC-BSD i386 8.0 might create device ad1s5 in the catalog /dev. But it creates ad1s1 (!) device. As result, this logical NTFS-partition can not be mounted. Primary NTFS-partitions are recognised and mounted well by PC-BSD i386 8.0. The logical NTFS-partition is recognised and mounted well by FreeBSD i386 7.3 and 8.0 (and Solaris x86 10). klnW 323 installation: freezes on macbook pro System Configuration 8.1-RC1 8.1 System Defect closed 2010-07-12T23:32:11-07:00 2012-01-24T11:59:22-08:00 "Nothing fancy, I just started installation (I let install dvd run) and at the step: acpi0: on motherboard it freezes. This was the last message displayed." macias 373 Cannot update phonon-gstreamer port System Configuration 8.1 8.2 System Defect closed 2011-05-03T10:04:33-07:00 2012-01-26T12:42:08-08:00 "Hi, I was updating the ports on PC-BSD 8.2 when I hit an error with phonon-gstreamer. I have reported the error with the the BSD ports, http://www.freebsd.org/cgi/query-pr.cgi?pr=156717, but there is no problem with FreeBSD 8.2 itself. I realise that it isn't always possible to update all the ports of a PC-BSD with portmaster -a but I am surprised at this error. The port maintainer suspects a problem with PC-BSD so I'm filing this as a bug here." Charlie_X 405 Partitioner: partition size edit box limit is too low System Configuration 9.0-BETA1 9.0 System Defect closed 2011-10-15T02:03:15-07:00 2011-12-28T07:42:26-08:00 "I tried to install PC-BSD 9.0 Beta, at partitioning stage, I was about to add a partition, so I had to enter the size for it. The problem is, there is a limit in edit box, when you enter the size, so for partition let's say 200GB I had to enter ""99999"" and use ""^"" button to increase the value by 1MB. My suggestion: drop the limit, when user accepts the size, check if the size is valid." macias 502 VirtualBox Guest - Auto-resize Guest Display Not Working System Configuration 9.0-RELEASE 9.0 System Defect closed 2012-01-28T13:55:08-08:00 2012-09-04T07:48:23-07:00 "Hi, I'm running VirtualBox OSE 4.18 with Slackware 13.37 x86 as the Host using PC-BSD 9.0 as a Guest and I've noticed, not only for myself, but I've also seen this problem with other users, that the Auto-resize is not working. Fullscreen appears to work ok, but if I want to run the window in a maximized size so I can see my host, then I try to use the auto-resize it doesn't do anything and the window appears to tall and wide, because I noticed the scrollbars in the VirtualBox window and the taskbar at the bottom for LXDE does not appear. Here's a screen shot showing the window in a maximized size with the taskbar cut off. http://i.imgur.com/DTcYT.png Also if I start PC-BSD for the first time the window seems to resize, because in the screen shot you'll not see any scrollbars, which indicates that something with the auto-resize seems to be working to a point, but if you then try to resize the window then you'll get the scrollbars and click the auto-resize nothing happens. The taskbar that you see at the bottom of the VirtualBox window is my host. I've attached the VB Log... THANKS" DasFox 629 VirtualBox guest kernel module gets loaded after display manager System Configuration 9.1 System Defect closed 2012-07-24T08:26:54-07:00 2012-07-24T12:55:56-07:00 "Running PCBSD 9.1-BETA1 I found that the kernel module for a !VirtualBox guest gets loaded after the display server starts. This causes pointer integration (vboxmouse) and the VirtualBox video (vboxvideo) drivers to not work. The solution I found is to either add vboxguest to the list of fastboot_earlyrc startup files or add 'vboxguest_load=""YES""' to /boot/loader.conf. This causes the vboxguest kernel module to be loaded before GDM starts, making vboxvideo and vboxmouse happy." dannomac 657 Unable to assign a static IP address because netmask validation always fails System Configuration 9.1-BETA1 9.1 System Defect closed 2012-09-13T10:23:08-07:00 2012-09-17T07:17:07-07:00 Netmask is out of range! (255.255.255.0) Fields must be between 0-255. tester543 659 Warden GUI - Invalid IP address - new jail wizard System Configuration 9.1-RC1 9.1 System Enhancement closed 2012-09-18T23:28:42-07:00 2012-09-25T10:08:06-07:00 "The Warden_GUI report ""Invalid IP address"" for xxx.yyy.zzz.nnn when nnn is bigger as 99. For example 192.168.10.100 is invalid but 192.168.10.99 is accepted. " josef 691 PCBSD 9.1 - Bugginess experiences, so far System Configuration 9.0-RELEASE 9.1 System Enhancement closed 2013-02-06T13:06:15-08:00 2013-03-08T10:51:32-08:00 "9.1 is sure the closest thing we have had to a very useful PC platform. Love it, in principle !! * The overall impression is one of periodic bugginess. The delays in operation set in as soon as the Internet browser is fired up, for example. Then both processors got up to 70%usage and nothing much happens - it locks up, a lot. Its almost like PC-BSD is a hackers delight, in that the machine is being taken over as soon as it goes online - - - At this point in time, 490 processes are typically running, but nothing is happening - the machine is stuck. Suddenly, after leaving it for an hour it may free up - and then it runs normally. Using Firefox - or Opera has the same effects sometimes - but at different times. The difference between the bugginess in either of these Browsers is mainly that it will happen at different times - or under different circumstances. Firefox 18.01 runs great once this bugginess resolves, if it does. Hardware = HP Dual AMD 64, 6Gbyte DDR-2 Ram, . Btw, Gnome 2 is the most stable Desktop - I tried them all. Also it does some Power Management whereas the others are hopeless at Hard Disk preservation. I suggest specializing in setting up with Gnome 2, as Fuduntu have done. Thanks Ken LA, CA, USA" GeeKen 24 Change name of Norwegian language in language selection screen System Configuration 1.4-DEV / 1.4-BETA System Defect closed 2007-09-08T01:18:08-07:00 2007-09-10T07:39:28-07:00 "Please change ""Norwegian Bookmal"" to ""Norwegian Bokmål"". There is no such language as ""Bookmal"". (http://en.wikipedia.org/wiki/Bokmål)" Derbeth 26 Untranslated messages System Configuration 1.4-DEV / 1.4-BETA System Defect closed 2007-09-08T06:19:06-07:00 2007-09-11T10:15:33-07:00 There are some messages in latest Friday 7th September snapshot that are not translated although corresponding strings in Pootle are translated (see attached screenshots). Derbeth 64 Include translations for the documentation of KDE's applications System Configuration 1.4 System Defect closed 2007-10-08T17:41:37-07:00 2009-06-13T12:18:22-07:00 I think it's important to include translations for the documentation of KDE's applications. Currently there is the translation for the KDE-base documentation but not for its applications such as KMail. charles 69 Upgrading from 1.3 to 1.4 - PC-BSD starts with error System Configuration 1.4 System Defect tim closed 2007-10-26T14:36:08-07:00 2008-05-05T10:00:14-07:00 "After upgrading from 1.3 to 1.4, everytime I boot up I get the following error: KDEinit could not launch 'DBSD-nettray' Could not find dbsd-nettray executable " vintagevolks2000 89 eclipse cannot be installed from the freeBsd packages System Configuration 1.4.1 System Defect closed 2008-01-08T11:51:48-08:00 2008-01-08T16:27:13-08:00 "when installing eclipse or eclipse-cdt from the freebsd packages with pkg_add : a conflict with an already installed package of PCBSD occurs : eclipse require to install rarian which conficts with scrollkeeper which is already installed by PC BSD. It seems that rarian a new tool that do the same thing as scrollkeeper. When scrollkeeper is removed the eclipse installation works fine. " nox1492 107 PC-BSD 1.3 and desktopBSD utils System Configuration 1.3.4 System Defect tim closed 2008-03-05T12:40:21-08:00 2008-05-05T09:51:30-07:00 "I was getting ready to upgrade PC-BSD from 1.3 to 1.4. I removed all the PBI (desktopBSD util was one of those), then I went to user management to add a new user, and I got an error that a library needed for DesktopBSD was not installed. I am installing 1.4 right now, hopefully I will not get the same error. In the case I see the error again, I will post the exact error message" TWiN 193 Start downloading after change mirror System Configuration 8.0-ALPHA System Defect kris closed 2009-12-16T14:12:23-08:00 2009-12-18T09:45:28-08:00 "When in list exists one or more failed download, after user changed mirror, immediately start re-download. Usability tweak." yerenkow 215 keyboard and login System Configuration 8.0-ALPHA System Defect closed 2010-01-06T15:37:06-08:00 2010-01-13T07:17:34-08:00 "My PCBSD is set on the Belgian azerty keyboard.It works, except with the login. It looks like the login uses the US querty keyboard always. " ToranK 231 Invalid virtual console refresh rate System Configuration 8.0-RC System Defect closed 2010-02-02T00:09:58-08:00 2010-03-13T02:28:28-08:00 "After upgrade from 7.1.1 to 8.0 RC (sorry can only set version to 8.0-BETA in bug reporting tool) When switching to virtual console via Alt Ctrl Fn Monitor complaining about invalid refresh rate KDE 4 with desktop effects running smoothly with correct resolution & refreh rate Reconfiguring X (Option 7 in boot menu) doesn't help" bitraptor 233 8.0-RC: Country or Region in KDE System Settings is set wrongly for Slovenia System Configuration 8.0-BETA System Defect closed 2010-02-02T05:18:23-08:00 2010-02-02T07:25:13-08:00 "I just installed PC-BSD 8.0-RC (AMD64) and during the installation I selected the Slovenian language. The installation was fine but after booting to the desktop I noticed that some data wasn't shown in Slovenian way (translations were fine). I opened System Settings → Country/Region and Language and there I've noticed that Country or region was set to Sierra Leone, while it should be Slovenia. I guess the problem is that somewhere during the installation you set country in the same way as language, meaning you use SL for country (which is the code for Sierra Leone) while the correct code for country Slovenia is SI. Note: Our language is Slovenian and for this the correct code actually is SL which is set correctly. Maybe the same mixup with codes is also the reason why Firefox doesn't by default use Slovenian locale and language (sl-SI, which I had to change manualy), and why OpenOffice.org isn't using Slovenian translations. maybe there is some other problem somewhere else but I didn't notice it or check it out yet." JLP 242 DEL key not working in terminal/console System Configuration 8.0-RC System Defect closed 2010-02-08T00:17:50-08:00 2010-02-08T07:36:41-08:00 "Hitting DEL key in terminal/console does not have the expected effect. (adding ""bindkey ^[[3~ delete-char"" in /etc/csh.cshrc solves the problem for me)" bitraptor 286 cups group missing System Configuration 8.0 System Defect closed 2010-03-19T07:02:56-07:00 2010-03-29T09:13:57-07:00 /etc/devfs.rules uses cups group but cups group does not exist bitraptor 324 installation: disk is spinning up and down during loading modules System Configuration 8.1-RC1 System Defect closed 2010-07-12T23:36:53-07:00 2012-01-26T12:47:41-08:00 "This issue is not only about the noise, but also the effect of installation speed. Due to this effect, pretty straightforward step takes a lot of time. Macbook Pro, I just inserted installation DVD and let it run, at first the modules are loaded, like zfs.ko nullfs.ko opensolaris.ko zlib.ko etc. And loading looks like this: 1. the name module is displayed 2. the disc is slowing down 3. after a second it is speeding up 4. it is slowing down again (!) 5. repeat steps 3-4, 2 or 3 times 6. goto 1 Normally I would get entire live system up and running in the time required to load those modules. " macias 332 Update overwrites sudoers file System Configuration 8.1 System Defect closed 2010-07-23T02:40:19-07:00 2012-01-24T12:06:20-08:00 "Updating from 8.1-RC1 to 8.1[[BR]] Existing sudoers file is overwritten with default sudoers file, would expect that changes to file would be kept." bitraptor 334 Startup: Error parsing /etc/pf.conf System Configuration 8.1 System Defect closed 2010-07-23T04:31:03-07:00 2012-01-24T12:13:32-08:00 "Version 8.1[[BR]] On startup following errors appear on the console:[[BR]] /etc/pf.conf:4: could not parse host specification[[BR]] /etc/pf.conf:5: could not parse host specification[[BR]] no IP address found for lo1.network[[BR]] DHCP active, network access functioning normally " bitraptor 340 Disk Encryption Password breaks with Non-QWERTY keyboards System Configuration 8.1 System Defect closed 2010-08-09T23:34:29-07:00 2012-07-26T10:37:31-07:00 "When chosing disc encryption at installation time, the keyboard is already localised and the password/passphrase is entered with the localised keyboard layout. However, later at boot time the keyboard layout is still QWERTY when the password/passphrase is required. This can confuse a non-QWERTY user or render her/his installation unusable (if s/he does not know where the keys are on QWERTY). I had experienced this problem with FreeBSD already, so I knew how to circumvent it. Proposal for fix: - for the moment a warning message in the installer would be useful - generally it would be great if the installer could back-translate the password for the localised keyboard, i.e. if I used a German QWERTZ keyboard and entered as the password ""xyz"" the installer should translate it to ""xzy"" because y and z are exchanged between QWERTY and QWERTZ. At boot time, the user at the German keyboard would think s/he enters ""xyz"" while in reality FreeBSD is still expecting a QWERTY keyboard and this the password would be correct ""xzy""." SolarCatcher 341 Disk encryption - double entry of password does not lead to warning System Configuration 8.1 System Defect closed 2010-08-09T23:38:48-07:00 2012-07-09T10:00:35-07:00 "The installer offers a quick way to chose disc encryption. After that the user is asked to enter the password/passphrase twice. However, there is no warning displayed when the two are not equal. When I deliberately tried it, the installation process broke off later and I would believe it is due to the different passwords. However, this problem should be identified and signalled to the user at the time s/he enters the password/passphrase (similar to how Warden handles the double-entered root and user passwords)." SolarCatcher 382 UncategorizedPages System Configuration 8.1 System Defect closed 2011-09-07T02:16:23-07:00 2011-09-07T07:29:03-07:00 "I've been browsing through http://wiki.pcbsd.org/ for my [http://www.bestessays.com/custom_writing.php essay writing] assignment, when I noticed that a lot of pages are not categorized. I had trouble sifting through the pages because some of the pages I'm looking for aren't under the category they belong. I know that there's already a page listing the uncategorized pages but I'm hoping that someone can work on categorizing the pages. It will save time for a lot of people. Other than that, I can say that your wiki site has an incredible layout. It's easy to navigate the site; it merely lacks proper categorization." Karen01 467 Ibus setting in System Settings not working System Configuration 9.0-BETA3 System Defect closed 2012-01-10T02:03:47-08:00 2012-09-04T07:49:45-07:00 "Tried in VirtualBox image. Checkbox ticked, I re-logged in, and no ibus, and no checkbox ticked" yerenkow 478 kde4 vs. kde3 System Configuration 9-SNAPSHOT System Defect closed 2012-01-17T19:05:58-08:00 2012-01-26T11:09:29-08:00 "not really sure what i am doing here am using pcbsd 9_0_release dvd image (2012-01-16) i386 P4 3.2Ghz 4Gb ram which comes with kde4 installed (optional) when i install other ports (mostly in batch) some of the ports, through recursive dependency, cause kde3 to install (kdebase-3...) after this when choosing KDE option at login screen, it seems that both kde4 and kde3 load up i get a screen mixed with a kde3 panel, kde4 panel and kde4 background artwork though it seems that the kde4 desktop effects do not work have not noticed any other conflicts as yet 1. is it possible to set up gdm (login) to set separate options for both kde3 and kde4 2. is it possible to configure the system to allow for kde3 dependent ports to install though only use kde4 desktop " frisbie 599 Inconsistent look&feel System Configuration 9.0-RELEASE System Defect kris closed 2012-03-30T02:31:02-07:00 2012-09-04T08:00:32-07:00 "There are inconsistency in KDE and PC-BSD apps style: Cursor changes it's style when hovered on PC-BSD apps [[Image(http://intara.sunx.cc/pointer1.png)]] [[Image(http://intara.sunx.cc/pointer2.png)]] Also, when AppCafe is opened using update manager tray, it have different theme from KDE's one: [[Image(http://intara.sunx.cc/appcafe1.png)]] [[Image(http://intara.sunx.cc/appcafe2.png)]] Finally, some Qt apps (not only PC-BSD related) seem to be unaffected by KDE's theme settings: [[Image(http://intara.sunx.cc/win1.png)]] " arrowdodger 615 No Sound System Configuration 9.0-RELEASE System Defect kris closed 2012-06-16T04:18:45-07:00 2012-07-09T10:16:31-07:00 "Lo people, I still have no sound since the first install of my PCBSD 9 ... I tried all recommendations of User HandBooks and FAQ etc. ... but still doens't work. What I have tried : [QUOTE][I][B]dmesg[/B][/I] : hdac0: mem 0xd02c0000-0xd02c3fff irq 22 at device 27.0 on pci0 hdac0: HDA Codec #0: Analog Devices AD1981HD pcm0: at cad 0 nid 1 on hdac0 pcm1: at cad 0 nid 1 on hdac0[/QUOTE] [QUOTE][I][B]cat /dev/sndstat[/B][/I] : FreeBSD Audio Driver (newpcm: 32bit 2009061500/i386) Installed devices: pcm0: (play/rec) default pcm1: (play) [/QUOTE] [QUOTE][B][I]cat /boot/loader.conf[/I][/B] : snd_hda_load=""YES""[/QUOTE] [QUOTE][B][I]kldload snd_hda[/I][/B] : kldload: can't load snd_hda: File exists[/QUOTE] [QUOTE][B][I]cat /etc/sysctl.conf[/I][/B] : dev.pcm.0.play.vchans=0 dev.pcm.0.rec.vchans=0 #hw.snd.default_auto=1 hw.snd.default_unit=0[/QUOTE] [QUOTE]When settings [B][I]default_unit=1[/I][/B] : Mixer vol is currently set to 100:100 Mixer pcm is currently set to 100:100 When settings [B][I]default_unit=0[/I][/B] : Mixer vol is currently set to 100:100 Mixer pcm is currently set to 100:100 Mixer speaker is currently set to 100:100 Mixer line is currently set to 100:100 Mixer mic is currently set to 100:100 Mixer cd is currently set to 100:100 Mixer rec is currently set to 100:100 Mixer igain is currently set to 100:100 Mixer ogain is currently set to 100:100 Mixer line1 is currently set to 100:100 Mixer monitor is currently set to 100:100 Recording source: mic[/QUOTE] In Gnome interface, I have an option to confiure the sound (near the horloge), when I try to configure: Hardware : I found no device Input : Input volume to Maximum, /dev/dsp0 (selected) Output : Output volume to Maximum , /dev/dsp0 Stereo (selected), /dev/dsp1 Stereo. Yesterday, when trying all configuration, I had a sound a low level sound. Like if you set the vol of your radio to 0,01. But the sound was there, and all my mixer was set to 100:100. I lost this conf and I can't hear not anymore. Thanks for the help :)" dbrons 639 Mouse Freezes at GUI Startup for User System Configuration 9.1-BETA1 System Defect kris closed 2012-08-27T14:52:05-07:00 2012-09-25T10:09:17-07:00 "This bug was reported by Lsayre from the PCBSD forums. Mouse is freezing instantly when computer starts up the PCBSD GUI. We have received other reports that the mouse is freezing intermittently and can be fixed by unplugging and re-plugging the mouse back in. Thread Referenced: http://forums.pcbsd.org/showthread.php?p=98763&posted=1#post98763" joshms 642 Xorg, GDM keyboard layout System Configuration 9.0-RELEASE System Defect kris closed 2012-08-29T17:30:12-07:00 2012-09-07T09:38:42-07:00 "I chose the French standard keyboard layout during the installation, and yet, the GDM login screen is still with the US keyboard layout : embarrassing for typing my user password wich contains the ""w"" letter -> I'm obliged to type ""z"" instead, because the keyboard is in QWERTY instead of AZERTY. But the Unix CLI mode is in AZERTY, so no problem with the CLI." Boug 221 User must click on tickbox to be able to choose other keymap System Configuration 8.0-BETA System Enhancement closed 2010-01-20T09:45:56-08:00 2010-01-20T12:40:00-08:00 "When choosing the keyboard layout in the installer, user is required to deselect the ""use default"" tickbox before choosing another layout. It should be possible to simply click on a layout without having to click the checkbox, which is kind of hard to find." arand 302 Restore Desktop Toolbar System Configuration 8.0-BETA System Enhancement closed 2010-05-20T21:35:01-07:00 2010-05-21T05:07:25-07:00 "There is no intuitive way to reinstall a deleted Desktop Toolbar. We should be able to simply right-click somewhere on the desktop to get a menu that includes ""Reinstall Toolbar"" if it is not present." mfh 318 "set moused_flags=""-3""" System Configuration 8.1-RC1 System Enhancement closed 2010-06-28T04:40:30-07:00 2010-06-29T08:45:54-07:00 "I guess there are no more mice without a third mouse button or scroll wheel around but there are a lot of notebooks with only two buttons. Setting moused_flags=""-3"" in rc.conf enables them to paste the current selection by pressing both buttons simultaneously." lme 58 "Typo: OpenOffice.org named ""OpenOffice""" System Configuration 1.4 1.5 System Defect closed 2007-09-30T10:09:20-07:00 2007-10-01T04:21:53-07:00 "In the system installer, there's a typo in the additional component screen: OpenOffice .org is named ""OpenOffice""." charles 32 Add NTP configuration to GUI System Configuration 1.3.4 1.5 System Enhancement closed 2007-09-13T13:42:16-07:00 2008-02-21T11:31:58-08:00 At some point we need to go through and add a small NTP configuration GUI to our setup. kris 54 Change Clock layout for Latin Langs System Configuration 1.3.4 7.0 System Defect kris closed 2007-09-21T15:10:39-07:00 2008-09-04T11:49:51-07:00 In the next release of PC-BSD, update the installer to modify the kde clock settings, so that the format is changed based on locale, such as Latin. kris 112 Missing GEOM ELI module in kernel System Configuration 1.4.1 7.0 System Defect closed 2008-03-11T12:51:32-07:00 2008-07-02T14:59:49-07:00 "THe PCBSD kernel in the 1.4 series is missing the GELI module. I feel this is incorrect as: a) GELI is a standard part of the FreeBSD kernel since 6.0. I think that the PCBSD kernel should contain additional modules, but not remove modules from the GENERIC 86 kernel so the base system is consistent with what is stated in the FreeBSD handbook (considered cannon). b) It was part of the default kernel in pc-bsd 1.3. It's a bit of a shock when upgrading to 1.4 that one can't access one's encrypted partitions. == Work around == Add the line {{{geom_eli_load=""YES""}}} to /boot/loader.conf. To load the module without having to reboot for loader.conf to take effect, as root in a console enter: {{{# kldload geom_eli}}}" pheet 159 Errors in Handling of KDE User Preferences and Plasma System Configuration 7-BETA1 7.1 System Defect closed 2008-12-13T06:28:30-08:00 2009-06-13T12:34:12-07:00 "Changing of my Picture in the Systemadministration tool of KDE isn't allowed without Administrator privileges. I cannot change my password or my user preferences in the same windows on first try. Error: -- STARTOFERROR -- An Error occured and your Passwort has probably not been changed. The error Message was chpass [-d domain] [-h host] [-a list} -p encpass] [-s shell [-e mmddyy] [user] -- ENDOFERROR -- The default plasma workspace crash on closing. Error: -- STARTOFERROR -- Plasma crashed and caused the Signal 6 (SIGABRT). -- ENDOFERROR -- All this errors occured on my laptop and on my desktop PC. It looks like hardware independent errors." andreas 154 Synchronice local tty login keymaps/locale with x-keymap/locale System Configuration 7-BETA1 7.1 System Enhancement closed 2008-10-22T00:04:26-07:00 2009-06-13T12:43:19-07:00 "When a login to a TTY (locally) it's annoying that the keymap is not syncronized with the one in X/KDE. I modified rc.conf manually to fix it to my keyboard, but it would be nice that this setting followed the configured locale." udragon 203 User not allowed to change icon for himself System Configuration 8.0-ALPHA 8.0 System Defect kris closed 2009-12-22T08:00:02-08:00 2009-12-29T09:56:58-08:00 "Password & User account - user mode saying admin disabled this feature for you" yerenkow 321 powerd flags hiadaptive System Configuration 8.1-RC1 8.1 System Enhancement closed 2010-07-07T00:21:07-07:00 2010-07-07T06:47:00-07:00 "Default powerd_flags are ""-a adaptive -b adaptive"". Possibly it's worth using ""hiadaptive"" for the ""while on AC power"": -a hiadaptive -b adaptive" vans 375 Conky window disappears System Configuration 8.1 8.2 System Defect closed 2011-07-15T15:48:51-07:00 2011-07-18T10:03:16-07:00 "Install conky pbi. Open a terminal, type {{{conky &}}}. Make sure conky appeared, should be in the upper right. Click on the desktop. What should happen: nothing. Conky should stay right where it is, happily reporting away. Whad does happen: conky disappears behind the desktop. ps will show it's still running. Fix: in /Programs/conky/etc/conky/conky.conf, change {{{own-window-type desktop}}} to {{{own-window-type normal}}} As this is a pretty minor bug, I took the opportunity to make my first attempt at a patch file. Please let me know if it works or not. I used {{{diff -crB new.file old.file > file.patch}}} BTW, just installed version 8.2. Trac does not reflect current PC-BSD version (8.2). My bug report here should be Version = 8.2, Milestone should be something greater than 8.2" grep2grok 379 Temporary files should be cleaned at boot System Configuration 9.0-BETA1 9.0 System Enhancement closed 2011-09-05T17:13:02-07:00 2011-09-06T09:06:17-07:00 PCBSD doesn't currently set certain environment variables in rc.conf which can help clean up user's systems at boot. The attached patch cleans up /tmp files. gcooper 393 hw.pci.do_power_nodriver System Configuration 9.0 System Enhancement closed 2011-09-24T18:02:11-07:00 2012-09-04T08:04:53-07:00 Possibly, setting hw.pci.do_power_nodriver=2 (or even 3) in loader.conf will do no harm, while offer some power savings. But, I can't guarantee that it doesn't break anything, so it has to be tested well. Found here http://wiki.freebsd.org/TuningPowerConsumption. I've used it for some time, and it seems that all works, but haven't done thorough tests, so I'm a bit unsure about it. vans 589 x-chat in meta-package System Configuration 9.0-RELEASE 9.1 System Enhancement closed 2012-02-27T06:23:33-08:00 2012-09-04T08:11:39-07:00 "Hi , I think of adding X-chat as meta package for all Desktop environment for new users to get in touch with users for help, like that of Linux mint. And this info about how to get help from IRC can be added on welcome screen. And welcome screen of Linux mint 12 is nice idea to incorporate.It can be configured from x-chat config file. I tried with this reference and its working. http://en.wikipedia.org/wiki/Wikipedia:IRC/Tutorial#X-chat_.28Windows_version.29 Regards, Jay. " rockworldmi 67 russian filenames System Configuration 1.4 System Defect yerenkow closed 2007-10-19T02:46:19-07:00 2008-10-20T09:45:45-07:00 "After installation of PC-BSD 1.4. choosing national language (russian) - russian filenames not display properly until not add a foolowing code to My login_conf in local directory Code: me:\ :charset=UTF-8:\ :lang=ru_RU.UTF-8: " dcnov 218 Installation Root password System Configuration 8.0-ALPHA System Defect closed 2010-01-11T07:13:39-08:00 2010-01-11T10:47:54-08:00 "When entering the root account password during install, it seems to remove an spaces entered into the password string. Example: If the following was entered: ""My Password"" the following would be set as root password: ""MyPassword""." segfault 325 installation: keep the install entry menu for much longer System Configuration 8.1-RC1 System Defect closed 2010-07-12T23:40:06-07:00 2012-01-26T13:10:16-08:00 "When all modules are loaded, PCBSD installer shows entry install menu (if it should install in normal mode, or without ACPI, etc). IMHO the time period of showing this menu is too short. Actually, I personally thinks, that because it is installation, and not just booting already installed system, there should be no timeout at all. Every step should be manually confirmed. In my case, before I could do anything (and loading modules took already a lot of time), installer was proceeding with default options. Not, that default options are bad, but admin should be in control here." macias 402 Radeon X700 is not autodeted System Configuration 9.0-BETA3 System Defect kris closed 2011-10-07T12:35:33-07:00 2012-09-04T08:06:18-07:00 Radeon X700 (RV410 [Radeon X700 (PCIE)]) is not autodetected after installation. Manually chosen Ati with 3D works fine. vans 316 Disable PC speaker by default System Configuration 8.1-RC1 System Enhancement closed 2010-06-28T02:37:54-07:00 2010-06-28T05:41:13-07:00 "FreeBSD and PC-BSD ship with the annoying PC speaker enabled by default. It would be nice to disable it by setting hw.syscons.bell=0 in /etc/sysctl.conf " lme 317 remove usbd_enable from rc.conf System Configuration 8.1-RC1 System Enhancement closed 2010-06-28T04:36:23-07:00 2010-06-28T05:44:10-07:00 "The USB daemon usbd was removed four years ago. So there's no need to ""enable"" it in rc.conf. See http://www.freebsd.org/cgi/cvsweb.cgi/src/etc/rc.d/Attic/usbd for details." lme 593 """Ports Console"" section of System Manager is confusing" System Configuration 9.0-RELEASE System Enhancement closed 2012-03-06T11:02:45-08:00 2012-05-01T06:43:15-07:00 "In the system manager, the section for the ports jail is labeled ""ports console"", which is ambiguous. It could be thought to refer to regular system ports, accessed through a terminal. For clarity, that section should be labeled ""Ports Jail""." bmilman 57 Add several neat options to the contextual menu System Configuration 1.4 1.5 System Enhancement closed 2007-09-30T08:07:27-07:00 2008-02-21T12:37:44-08:00 "Terry [http://forums.pcbsd.org/viewtopic.php?f=6&t=5653 asked] for a few options to the contextual menu (When you right-click a file): * Edit with vim (or rather Edit with Kwrite) * E-mail file as an attachment * Burn to disk Maybe this will have to be integrated to the PBI Creator. For instance when you create a K3B PBI, you will have to add this contextual menu that will pass the path of the file to K3B as an argument, etc..." charles 337 Enhanced Version System Configuration 8.1 8.2 System Enhancement closed 2010-08-01T12:23:55-07:00 2012-07-26T10:35:34-07:00 "Good day, Will be good if the pcbsd team release specified builds to intel and amd. Using gcc 4.5 (4.6 maybe ?), and optimization flags like -fexcess-precision=fast, -mfpmath=sse, -m64 and other options. This builds can be made like a test, and see the performance improvments to the user. Other thing, is combined with that, some pbis, like gimp, blender, using this flags already setup in OS. Best Regards, " josiaslg 441 """portjail delete"" kills /usr/home" System Tool 9.0 System Defect closed 2011-12-20T06:47:19-08:00 2011-12-20T07:00:54-08:00 "Running ""portjail delete"" on 9.0-RC3 is not safe. Just ""lost"" /usr/home due to a bug inside portjail. Mounted filesystems aren't forcibly unmounted while performing rm -rf (sic!). Additionally ""portjail init"" tries to fetch files for FreeBSD-9.0-RC2 not RC3. " Nukama 308 freeze during boot from da0 after install System Tool 8.1-BETA1 System Defect closed 2010-06-09T11:07:55-07:00 2012-01-26T13:24:15-08:00 is see from last messages on screen complains like fstab have wrong parameters, will try to add screenshot navratil 27 LOGIN SCREEN - ICONS UNSATISFACTORY System Tool 1.4-DEV / 1.4-BETA System Defect closed 2007-09-08T23:44:44-07:00 2007-09-11T10:38:09-07:00 "This is a very minor thing - but it is a ""first impression"" thing. The two icons at the bottom of the login screen or too close together and furthermore the ""active zone"" for these icons is much too small and also offset from the icon itself. The active zone should be a rectangle the width of the title above the icon. When 1.4 gets released do we want every ""in-depth review"" journalist stating ""they cant even get their login screen right"" ?" mgreen 160 kcmshell4 crash with SIGSEGV System Tool 7.0.2 System Defect closed 2008-12-31T12:05:19-08:00 2009-06-13T12:28:50-07:00 "I reported this error to the KDE folks, and they say ""it's a PC-BSD bug. Report it to them."" So, I am. Here is my report to the KDE team. I think it's appropriate for you, too: I'm running PC-BSD 7.0.2, right out of the box. I started the ""system settings"" application, and selected the ""system settings"" icon, clicked the ""tasks"" tab, and finally clicked ""fetch ports"". It runs for maybe 10 seconds and then says: A Fatal Error Occurred The application KDE Control Module (kcmshell4) crashed and caused the signal 11 (SIGSEGV). Please help us improve the software you use by filing a report at http://bugs.kde.org. Useful details include how to reproduce the error, documents that were loaded, etc. Here are the details it gave me: Application: KDE Control Module (kcmshell4), signal SIGSEGV [New Thread 0x2a001100 (LWP 100168)] [Switching to Thread 0x2a001100 (LWP 100168)] [KCrash handler] #6 0x28d20c59 in QLocalePrivate::numberToCLocale () from /usr/local/lib/qt4/libQtCore.so.4 #7 0x28d212e6 in QLocalePrivate::stringToLongLong () from /usr/local/lib/qt4/libQtCore.so.4 #8 0x28d34465 in QString::toLongLong () from /usr/local/lib/qt4/libQtCore.so.4 #9 0x28d34563 in QString::toInt () from /usr/local/lib/qt4/libQtCore.so.4 #10 0x2b6922f3 in PortsnapProgress::parseFetch () from /usr/local/kde4/lib/kde4/libkcm_pcbsdsystem.so.1.0.0 #11 0x2b69459a in PortsnapProgress::qt_metacall () from /usr/local/kde4/lib/kde4/libkcm_pcbsdsystem.so.1.0.0 #12 0x28dddfac in QMetaObject::activate () from /usr/local/lib/qt4/libQtCore.so.4 #13 0x28dde3e2 in QMetaObject::activate () from /usr/local/lib/qt4/libQtCore.so.4 #14 0x2ba4c5d7 in Q3Process::readyReadStdout () from /usr/local/lib/qt4/libQt3Support.so.4 #15 0x2b8e2357 in Q3Process::socketRead () from /usr/local/lib/qt4/libQt3Support.so.4 #16 0x2ba4c713 in Q3Process::qt_metacall () from /usr/local/lib/qt4/libQt3Support.so.4 #17 0x28dddfac in QMetaObject::activate () from /usr/local/lib/qt4/libQtCore.so.4 #18 0x28dde3e2 in QMetaObject::activate () from /usr/local/lib/qt4/libQtCore.so.4 #19 0x28e171c3 in QSocketNotifier::activated () from /usr/local/lib/qt4/libQtCore.so.4 #20 0x28de61df in QSocketNotifier::event () from /usr/local/lib/qt4/libQtCore.so.4 #21 0x29194c2c in QApplicationPrivate::notify_helper () from /usr/local/lib/qt4/libQtGui.so.4 #22 0x2919b5ee in QApplication::notify () from /usr/local/lib/qt4/libQtGui.so.4 #23 0x285a0813 in KApplication::notify () from /usr/local/kde4/lib/libkdeui.so.7 #24 0x28dcda19 in QCoreApplication::notifyInternal () from /usr/local/lib/qt4/libQtCore.so.4 #25 0x28df48c3 in socketNotifierSourceDispatch () from /usr/local/lib/qt4/libQtCore.so.4 #26 0x29ca2286 in g_main_context_dispatch () from /usr/local/lib/libglib-2.0.so.0 #27 0x29ca5622 in g_main_context_check () from /usr/local/lib/libglib-2.0.so.0 #28 0x29ca5ba5 in g_main_context_iteration () from /usr/local/lib/libglib-2.0.so.0 #29 0x28df4a1e in QEventDispatcherGlib::processEvents () from /usr/local/lib/qt4/libQtCore.so.4 #30 0x29219d65 in QGuiEventDispatcherGlib::processEvents () from /usr/local/lib/qt4/libQtGui.so.4 #31 0x28dccb93 in QEventLoop::processEvents () from /usr/local/lib/qt4/libQtCore.so.4 #32 0x28dccd21 in QEventLoop::exec () from /usr/local/lib/qt4/libQtCore.so.4 #33 0x2958e257 in QDialog::exec () from /usr/local/lib/qt4/libQtGui.so.4 #34 0x2808450a in kdemain () from /usr/local/kde4/lib/libkdeinit4_kcmshell4.so #35 0x080487a2 in main () " tgphelps 263 CPU usage 100% System Tool 8.0-RC2 System Defect closed 2010-02-19T10:33:57-08:00 2010-07-08T05:48:12-07:00 I have the widget system load viewer on the desktop which shows CPU usage 100% and RAM usage: 60% nu2pcbsd 328 Kernel panic on install of PC BSD 8.1-RC1 System Tool 8.1-RC1 System Defect closed 2010-07-15T04:22:41-07:00 2010-07-23T06:25:18-07:00 "Hi, I'm getting the following panic when booting distrbution DVD to install PC BSD 8.1-RC1: panic: resource_list_alloc: resource entry is busy on Marvell SATA controller. The same box runs FreeBSD 7.3 just fine. I belive it's identical to: http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/145064" hopet 348 Power Management crashes my laptop. System Tool 8.1 System Defect closed 2010-09-01T16:44:15-07:00 2012-01-26T12:18:14-08:00 "Everytime Power Management automatically changes the status of my laptop( into standby, hibernate or powering down) my laptop becomes unusable. When in standby or hibernate, my laptop will appear to wake up, but the screen remains black and will not turn back on. When it is shutdown automatically, I get an error saying that the host could not connect to the X server. If I restart the computer, I will get that error for all three situations. Once I get the error, I have to manually shutdown my computer with the ""shutdown -p"" command and WAIT 10-15 minutes before I turn it back on(any less than 10 minutes and I will only get the error again). To avoid the problem to begin with, I have to start/shutdown the computer manually. I also want to point out that manually putting my computer into hibernate(suspend to disk) results in the computer going to standby(complete with error). Selecting standby(suspend to ram) results in the screen saver turning on(error is 50:50). I have a Sager NP2096 laptop and am running 8.1." fitzlt 387 "Enter administrative password dialog should clearly state ""password invalid""" System Tool 9.0-BETA1 System Defect closed 2011-09-09T14:45:19-07:00 2012-03-28T06:11:43-07:00 "Procedure: - Go to ""Control Panel"" -> ""Firewall Manager"" - Type in a wrong root password. Expected result: - Should be prompted to reenter password. Actual result: - A dialog flashes on the screen and I have no idea if the forked application failed or is still loading." gcooper 421 Broadcom BCM4311 crashes computer on connection to open access point System Tool 9.0-BETA3 System Defect closed 2011-11-12T16:08:47-08:00 2011-12-27T11:29:04-08:00 "Installed PCBSD9.0-RC1-x64-USBLITE.img on an older Dell Lattitude. Connected using the pre-installed network manager to a WPA encrypted network and no issues were noted. Laptop was subsequently connected to an open access point in another building and the screen turned a solid blue and computer became unresponsive. Upon manual reboot, X failed to load, Xorg -configure and attempt to load X based on that new configuration failed. Rerunning Display Wizard (at boot prompt) failed to run. Ethernet drivers refused to load. System was reinstalled, same behaviour was displayed two more times. " jrkotrla 609 """Dim Display"" power setting + VirtualBox inactivity = system hangs" System Tool 9.0-RELEASE System Defect kris closed 2012-06-07T23:14:25-07:00 2012-09-04T07:43:33-07:00 "I have PC-BSD 9 running on VirtualBox 4.1.2_Ubuntu r38459 on an Ubuntu 11.10 host, with the VirtualBox guest additions. After being inactive for some time (about 10 minutes), CPU usage jumps to 100% and stays there, and all SSH sessions into my PC-BSD system freeze (input and output), so it looks like a system-wide problem. But when I move the mouse over the PC-BSD VirtualBox window, the CPU usage comes down, and the SSH sessions work again. I've also figured out how to work around this problem. If I start ""PC-BSD control panel"", then go to ""System Settings"", click ""Power Management"", select the ""Power Profiles"" tab on the left, and uncheck the ""Dim Display"" checkbox (which is checked by default), then it no longer happens. " dacha 658 Sound device misdetected as a storage device? System Tool 9.1-RC1 System Defect closed 2012-09-18T16:23:45-07:00 2012-09-20T08:20:17-07:00 "I sometimes see a process like ""file /dev/dspX"", as if it tries to determine the filesystem type." tester543 53 Software Components are not PBI Version! System Tool 1.4-DEV / 1.4-BETA System Enhancement Plage closed 2007-09-20T13:25:08-07:00 2007-10-26T09:00:03-07:00 "He probably means that the add / remove components such as KDE Games / KOffice stuff isn't a PBI, but a package file. This is as intended though, since they are apart of the ""base"" system, but are only installed at the users discretion. " Plage 163 VirtualBox to PC-BSD System Tool 7-BETA1 System Enhancement closed 2009-05-04T16:39:14-07:00 2009-06-13T12:21:39-07:00 "Hi for all, http://www.freebsdnews.net/2009/05/02/sun-virtualbox-on-freebsd/ Sun's VirtualBox have be ported (not official yet) by Sun to FreeBSD. Maybe, get some special package where VirtualBox run in separated jails, completing the two solutions merge into one (instances of virtualbox runing in jails with some graphical tool integrated.) Configuration by graphical tool in KDE and http page for remote management. More later, some pc-bsd vm server version. That's it. Thanks. " josiaslg 444 GUI for editing systls System Tool 8.1 System Enhancement closed 2011-12-20T20:15:35-08:00 2012-06-26T10:02:41-07:00 There should be a gui for editing sysctls. It could start with just showing the name, built in description, and offering a textbox to change it (similar to Firefox's about:config) but it could easily grow to enable more complex changes. eadler 40 Graphical Samba file sharing management System Tool 1.3.4 1.5 System Defect closed 2007-09-14T05:54:34-07:00 2007-10-06T09:15:05-07:00 Create graphical Samba file sharing management gerard 42 Backup Manager System Tool 1.3.4 1.5 System Enhancement closed 2007-09-14T06:18:33-07:00 2008-01-09T07:44:13-08:00 "Backup Utility - [http://forums.pcbsd.org/viewtopic.php?t=5656]. The Backup Manager should be able to backs up files/folders AND/OR config files (KMail, Opera, Firefox, Amarok, etc...)" gerard 114 KCron and some applications cannot read - unknown code page System Tool 1.4 7.0 System Defect closed 2008-03-16T21:09:07-07:00 2008-05-22T08:45:01-07:00 "I have read defect for Russian translation on KDE 3.5.7/3.5.8 for Cron and some applications - some cyrillic chars is replaced on ""?"". For Cron not translated month and weeks day name. Your see example: July - ""????"" - real Russian name Июль. I write on this bug in to KDE develomer, but not respond. Please, correct this error. " VictorVG 38 Rolling out a lot of PC-BSD workstations easy System Tool 1.3.4 7.0 System Enhancement closed 2007-09-14T05:49:01-07:00 2010-07-07T12:22:51-07:00 Create utility/tool to make rolling out a lot of PC-BSD workstations easy gerard 44 Migration tool System Tool 1.3.4 7.1.1 System Enhancement closed 2007-09-14T06:22:40-07:00 2010-07-07T12:24:06-07:00 Migration tool from Windows to PC-BSD (IE favourites, Firefox bookmarks, Outlook Express Settings, My Documents, Cookies, Wallpaper) gerard 251 Compositing suspended for being too slow System Tool 8.0-RC 8.0 System Defect closed 2010-02-14T00:19:03-08:00 2010-02-16T10:12:23-08:00 "Here's part of the message from notification area: ""Compositing was too slow and has been suspended. If this was only a temporary problem, you can resume using ALT+SHIFT+F12 shortcut. You can also disable functionality check in advanced ..."" Was able to resume compositing using the shortcut. " finid 275 NTFS filesystem detected as FAT or msdosfs System Tool 8.0 8.1 System Defect closed 2010-03-02T06:58:58-08:00 2010-03-02T08:44:09-08:00 "Using 'fdisk -s /dev/da0' shows da0s1 as FAT (or msdosfs cannot remember) when it is NTFS. How can this be? Also this command is not as explicit as in linux, it is not clear what there is in the slices or the hard disk." Goette 274 Automount of NTFS filesystems from /etc/fstab System Tool 8.0 8.1 System Enhancement closed 2010-03-02T06:54:07-08:00 2010-07-07T12:43:39-07:00 As I could check, a NTFS filesystem cannot be mounted from /etc/fstab because the system forces to mount it via 'mount_ntfs' command instead of 'mount -t ntfs', that is how linux does and is better. Goette 603 ossec System Tool 9.0-RELEASE 9.1 System Enhancement closed 2012-04-28T11:02:57-07:00 2012-04-30T09:29:21-07:00 "Ossec can be replacement for denyhost as a feature for PC-BSD 9.1. http://www.ossec.net/ More info . Thanks, Jay" rockworldmi 592 System manager allows ports fetch for uninitiated ports jail System Tool 9.0-RELEASE System Defect closed 2012-03-06T10:52:27-08:00 2012-05-01T06:42:58-07:00 "Steps to duplicate: Before running 'portjail init' or after running 'portjail delete' on a PC-BSD 9 system: 1. Go to the System Manager, Tasks tab. 2. Click the ""Fetch Ports Tree"" button under ""ports console"". 3. Portsnap will appear to proceed as normal. 4. Run 'portjail init' and 'portjail start' 5. Enter the ports jail, 'cd /usr/ports' will fail. Expected: Fetch Ports Tree button should warn that the ports jail is not initiated and close. Reported by cvixie" bmilman 43 Enhancements for Terminals System Tool 1.3.4 System Enhancement closed 2007-09-14T06:21:14-07:00 2009-06-13T12:37:47-07:00 "Terminal server enabling features in ""System Tool"" (requested by Andrei - Think Client Release)" gerard 217 Trying to ssh (or sftp) to a remote box causes error. System Tool 8.0-ALPHA 8.0 System Defect closed 2010-01-11T05:58:11-08:00 2010-01-13T07:22:55-08:00 "When trying to ssh or sftp to a remote server, the following error message appears and the connection is dropped: % ssh username@host ssh_askpass: exec(/usr/local/bin/ssh-askpass): No such file or directory Host key verification failed. % Below, the version number of PC-BSD is given as 8.0-alpha, but I'm actually using 8.0-beta. " slicer69 288 Wireless Network Configuration System Tool 8.0 8.0 System Defect kris closed 2010-03-24T08:22:50-07:00 2010-07-07T12:49:48-07:00 "When adding a wireless network to the network list, if the SSID is too long, it is truncated in the list and an ellipsis is added. This will not let you connect properly. Sorry, i'm new to BSD and don't know the terms to better explain it. Basically, when i scanned for a network using the utility, my network came up, but the SSID is longer than the field. So when added to the list of networks, it was added with an ellipsis. This confused the hell out of me for the longest time. I'm sure there's a simple fix to this in the utility. It worked after i edited it in the list and put the full name. " DangerouslyPassive 574 New users: Menu auto-refresh every 4 seconds on LXDE User Manager 9.0-RELEASE System Defect tim closed 2012-02-15T13:05:55-08:00 2012-07-30T08:46:21-07:00 "I installed 9.0 REL (32 and 64) on a new computer, the main user called admin created via the installation program works great. I opened the user management and created a new user, logged in using LXDE and the main menu refreshes every 4 seconds. The only way to stop the refresh is to open the terminal and - chmod 000 ~/.cache/menus naturally if I do this, once I restart the computer the menu is empty. doing a ""ps awwx"" I was able to catch a /usr/local/libexec/menu-cache-gen process running each time that the menu refreshes. I tried to killed various processes but I was not able to find the culprit, sometime killing pc-controlpanel and menu-cache fix the problem until the computer restarts, other times there are multiple pc-controlpanel. While the problem is present, the system update doesn't recognize any updates and it runs extremely slow. I am able to replicate it every time on different computers and CPU. I also tried to create 2 different users during the installation, and it works correctly KDE works without problems" TWiN 577 User Manager deletes home directory without prompt User Manager 9.0-RELEASE 9.1 System Defect tim closed 2012-02-16T17:01:01-08:00 2012-02-25T08:31:40-08:00 "This should be definitely an optional choice. There is a reason for hiding this devastating user removal behaviour into a knob only visible after reading manpage/help. {{{ -r This tells pw to remove the user's home directory and all of its contents. The pw utility errs on the side of cau- tion when removing files from the system. Firstly, it will not do so if the uid of the account being removed is also used by another account on the system, and the 'home' directory in the password file is a valid path that com- mences with the character `/'. Secondly, it will only remove files and directories that are actually owned by the user, or symbolic links owned by anyone under the user's home directory. Finally, after deleting all contents owned by the user only empty directories will be removed. If any additional cleanup work is required, this is left to the administrator. }}}" Nukama 85 Problems Removing users User Manager 1.4.1 System Defect tim closed 2007-12-31T08:42:36-08:00 2008-01-08T16:21:01-08:00 "I was in need to create a new user (nUser) and to remove the current one (oUser). I was logged in as oUser, and I was able to add nUser and remove oUser. I then tried to logout, and naturally everything froze as the current user folder was not existing anymore. I would suggest to not allow to remove the current user, or to force a logout then remove it. I would also suggest to not allow to not have any sysAdmin, because a normal user may not know that you cannot login as ROOT in KDE." TWiN 122 GUI fails on Lenovo Z60M XOrg Configurator 1.5 System Defect closed 2008-04-08T02:28:20-07:00 2009-06-13T12:02:08-07:00 "I am attempting to install PC-BSD on a Lenovo Z60M featuring an ATI X600 mobile graphics card and a 1680x1050 display. The installation appears to be succesful, however when the OS first boots the screen is corrupted. I can see that it has tried to draw the PC-BSD wallpaper and I can take a photograph of this corruption later today if that would be helpful. The mouse pointer is visible and active, but it cannot interact with anything. I'm afraid that I have no experience of BSD, and limited exposure to *nix OSs (a year of two of Ubuntu Desktop, that's all!). I broke into the bootup process and tried fiddling with xorg.conf but I wasn't allowed to save the changes, even after running ""su root"". Clearly I am lacking some key knowledge here! I will try to help if you can instruct me. Many thanks!" Hopkins 290 Broken Intel driver causing radom freezes and massive unstable behavure. XOrg Configurator 8.0 System Defect closed 2010-04-07T08:30:02-07:00 2010-07-07T07:43:07-07:00 "The Intel driver with 3d enables is extremely unstable on my HP Pavilion dv6000 notebook with Intel 945 GM graphics card. It borks on a fresh installed desktop with composite enables/disables, with the desktop effects enabled/disabled. Basicaly it borks on anything that requests graphical violance.. :P The unstability now has reached such extend that I had to migrate to another system because pc-bsd is completely useless to me... :-(" patser 315 Display Wizard doesn't work XOrg Configurator 8.1 System Defect closed 2010-06-28T01:04:16-07:00 2010-10-10T04:48:53-07:00 "When the Display Wizard is started on my notebook, the screen is garbaged. The graphics chipset is drm0: on vgapci0 Solution: Change to the console, delete /PCBSD/xorg-gui/.xstartupsuccess and kill X. When the Display Wizard gets restarted, it works correctly. The strange thing about it is, that X initially works when the normal system installer is started." lme 273 no boot with radeon hybrid graphics XOrg Configurator 8.1 8.2 System Defect closed 2010-03-02T06:15:02-08:00 2012-01-26T13:23:19-08:00 I have occurred the problem with booting PC-BSD 8.0 on my Toshiba laptop (system is not yet installed, I'm trying to boot installer from the DVD disk). All I can see is black screen, no matter which option from the start menu I choose. The same thing is happening when I am trying to boot version 7.1.1. Vesa mode doesn't work as well. I think that it is the problem with my graphic card (Radeon HD 3470 - Hybrid X2). I was trying to boot this system on my girlfriend's laptop and it works. She has exactly the same model of laptop, with exception of the graphic card. She has the same Radeon HD 3470, but not Hybrid X2, only single card and installer starts properly. woockash_o 29 Xorg GUI refuses to set up proper screen resolution XOrg Configurator 1.4-DEV / 1.4-BETA System Defect closed 2007-09-09T04:05:21-07:00 2007-09-12T09:15:36-07:00 "Can't set proper resolution for my Samsung SyncMaster 913N LCD with ATI X600 PCI-e graphics card. After selecting resolution 1280x1024 in XOrg gui I was greeted with message: ""The previous attempt failed, please check your setting and try later!"" All I see in /etc/X11/xorg.conf that everything is detected correctly- Driver ""ati"", Monitor setting are correct- refresh rate and horizontal syncronization are fine- but I can't see refresh rate in Xorg GUI... Modes ""1024x768""- looks lke Xorg GUI didn't change any resolution here. " andrei 294 Display Setup Wizard crashes with nvidia-195.36.15 XOrg Configurator 8.0 System Defect closed 2010-04-24T23:47:12-07:00 2010-07-07T07:40:55-07:00 "System Updater updates nvidia driver, reboot and choose 7 at boot menu to start Display Setup Wizard Display Setup Wizard crashes when applying the config after ""Preparing to start the Desktop"" leaving a dirty filesystem and a 0-byte /etc/ttys i.e. in an unusable state :([[BR]] Recovered /etc/ttys, configured nvidia-173.14.20 ok, installed nvidia 195.22 from the FreeBSD ports ok[[BR]] Running Display Setup Wizard again with nvidia-195.36.15 again results in a crash x86 System with GeForce 6200 Graphics Card " bitraptor 108 Incorrect keyboard layout in xorg configurator XOrg Configurator 1.4.1 7.0 System Defect closed 2008-03-11T12:24:23-07:00 2008-04-11T09:34:14-07:00 "The x.org configurator always sets the keyboard layout to US. As this can prevent users from being able to login via KDM, it's fairly serious. Part of the problem is the keyboard layout is not properly set during install - see [http://trac.pcbsd.org/ticket/77 bug #77] and [http://trac.pcbsd.org/ticket/78 bug #78]. However, when the correct keyboard is set by manually editing /etc/X11/xorg.conf ,subsequent running of the x.org configurator will again incorrectly set the keyboard back to US. Suggested fix: The installer must: a) change to the key board layout the user has selected for the install b) Store the chosen layout correctly when writing the inital xorg.conf file The xorg configurator should read the existing keyboard layout from xorg.conf, and use that value when writing the new xorg.conf file." pheet 216 KDE unable to start - PC-BSD 8.0 Beta AMD 64 DVD XOrg Configurator 8.0-ALPHA 8.0 System Defect shinojjose closed 2010-01-10T04:28:55-08:00 2010-01-11T05:52:11-08:00 "I have tried PC-BSD 8.0 AMD64 Beta on PC with Athlon X2 7750,Asus M3A78EM motherboard ,2 Gb 800 MHz RAM ,ASUs PCI EXPRESS NVIDIA GeForce 8400 GS - 512 MB, SEAgate 500 GB SATA HDD , LG SATA DVD Writer ,ASUS VW195tl LCD Monitor ,Microsoft Basic Key board and usb mouse ''' My problem''' First i used ZFS file system but installation UNSUCCESSFUL and aborted Then i tried 15 GB primary partition for PC-BSD with file system UFS+S with / - 2048MB, SWAP - 4094 MB,/VAR - 1024 MB,/USR - 8187 mb. Installation started ,during it showed error message '''""TAR - failed to set default locale""''' but anyway installation completed successfully . After first boot during display configuration it gives an error '''""/USR write failed filesystem is full""''' but there is enough HDD space. So KDE unable to start and system goes to CONSOLE and showing message '''""The following istallion problem were detected $ HOME directory (/home/shinoj/) is out of disk space KDE unable to start""''' But any way there is '''enough space in /USR partition''' Please do the needful for the above bug " shinojjose 16 Bug using driver NVidia 100.14.11 and OpenGL XOrg Configurator 1.4 System Defect closed 2007-09-02T10:49:51-07:00 2007-09-05T09:58:59-07:00 "I have a Dell Precision M90 and Installed the latest version available in the download page (1.4 RC). Everithing went fine up to the Screen configuration, when I selected NVidia 100.14.11 driver. After entering the desktop and playing around...my screen suddenly gets stripped(gets dirty, impossible to see anithing) every time I select ""OpenGL screensaver"" and after 20~30 seconds of doing nothing. The same happens if I go to the KinfoCenter and I get into OpenGL section, after a few seconds. Same using Povra Modeler. Only pressing Ctrl+Alt+Backspace and after a strange lower bzzzzz noise and stripped screen, appears the NVidia logo and after the logging screen. If I shutdown my laptop, also I can't see the shutdown procces, only Black whit white dotted screen. I changed to NV driver and everithing related to the screen goes OK but not OpenGL acceletarion:( This is my System log: PC-BSD 1.4 Diagnostic Sheet Generated: domingo, 2 de septiembre de 2007, 03:19:13 PET -----------------Dmesg Output------------------------- Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #67: Sat Aug 25 11:14:04 PDT 2007 root@pcbsd:/usr/obj/usr/src/sys/PCBSD-SMP module_register: module uhub/ulpt already exists! Module uhub/ulpt failed to register: 17 Timecounter ""i8254"" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1995.02-MHz 686-class CPU) Origin = ""GenuineIntel"" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff Features2=0xe3bd,CX16,,> AMD Features=0x20100000 AMD Features2=0x1 Cores per package: 2 real memory = 1072197632 (1022 MB) avail memory = 1031618560 (983 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter ""HPET"" frequency 14318180 Hz quality 2000 acpi0: reservation of fed00000, 400 (3) failed Timecounter ""ACPI-fast"" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_acad0: on acpi0 battery0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 nvidia0: port 0xef00-0xef7f mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 16 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] pci0: at device 27.0 (no driver attached) pcib2: at device 28.0 on pci0 pci11: on pcib2 pcib3: at device 28.1 on pci0 pci12: on pcib3 pci12: at device 0.0 (no driver attached) pcib4: at device 28.2 on pci0 pci9: on pcib4 bge0: mem 0xecef0000-0xecefffff irq 18 at device 0.0 on pci9 miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:18:8b:a4:17:be pcib5: at device 28.3 on pci0 pci13: on pcib5 uhci0: port 0xbf80-0xbf9f irq 20 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xbf60-0xbf7f irq 21 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xbf40-0xbf5f irq 22 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xbf20-0xbf3f irq 23 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered uhub5: vendor 0x413c product 0xa005, class 9/0, rev 2.00/50.18, addr 2 uhub5: multiple transaction translators uhub5: 4 ports with 1 removable, self powered uhub6: vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 3 uhub6: 3 ports with 2 removable, bus powered ugen0: O2 O2Micro CCID SC Reader, rev 1.10/1.10, addr 4 pcib6: at device 30.0 on pci0 pci3: on pcib6 fwohci0: <1394 Open Host Controller Interface> mem 0xecbff800-0xecbfffff irq 19 at device 1.0 on pci3 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 44:4f:c0:00:21:4a:15:5c fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 46:4f:c0:4a:15:5c fwe0: Ethernet address: 46:4f:c0:4a:15:5c fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci3: at device 1.1 (no driver attached) pci3: at device 1.2 (no driver attached) pci3: at device 1.3 (no driver attached) pci3: at device 1.4 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0 ata0: on atapci0 ata1: on atapci0 pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: flags 0x1000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: at iomem 0xc0000-0xce7ff,0xce800-0xcffff on isa0 ppc0: parallel port not found. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 76319MB at ata0-master SATA150 acd0: DVDR at ata1-master UDMA33 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 SMP: AP CPU #1 Launched! cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad0s2a ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled pcm0: mem 0xefffc000-0xefffffff irq 21 at device 27.0 on pci0 pcm0: pcm0: ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled nvidia0: detached nvidia0: port 0xef00-0xef7f mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 16 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] -----------------Messages Output---------------------- Sep 2 02:13:03 pcbsd kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Sep 2 02:13:03 pcbsd kernel: sio1: port may not be enabled Sep 2 02:13:03 pcbsd kernel: ppc0: parallel port not found. Sep 2 02:13:03 pcbsd kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Sep 2 02:13:03 pcbsd kernel: sio1: port may not be enabled Sep 2 02:13:08 pcbsd kernel: ppc0: parallel port not found. Sep 2 02:13:08 pcbsd kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Sep 2 02:13:08 pcbsd kernel: sio1: port may not be enabled Sep 2 02:13:12 pcbsd ntpd[1008]: ntpd 4.2.0-a Sat Aug 25 10:37:33 PDT 2007 (1) Sep 2 02:14:51 pcbsd kernel: nvidia0: detached Sep 2 02:15:11 pcbsd kernel: nvidia0: port 0xef00-0xef7f mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 16 at device 0.0 on pci1 Sep 2 02:15:11 pcbsd kernel: nvidia0: [GIANT-LOCKED] Sep 2 02:17:13 pcbsd kdm-bin[2290]: X server for display :0 terminated unexpectedly Sep 2 02:20:33 pcbsd kdm-bin[2290]: X server for display :0 terminated unexpectedly Sep 2 02:27:00 pcbsd kdm-bin[2290]: X server for display :0 terminated unexpectedly Sep 2 02:38:18 pcbsd kdm-bin[2290]: X server for display :0 terminated unexpectedly Sep 2 02:56:25 pcbsd su: lisette to root on /dev/ttyp1 Sep 2 03:08:39 pcbsd su: lisette to root on /dev/ttyp2 Sep 2 03:08:39 pcbsd su: lisette to root on /dev/ttyp2 Sep 2 03:09:37 pcbsd last message repeated 2 times ------------------RC File----------------------------- background_dhclient=""YES"" compat5x_enable=""YES"" sshd_enable=""YES"" usbd_enable=""YES"" moused_type=""auto"" moused_enable=""YES"" devd_enable=""YES"" devfs_system_ruleset=""devfsrules_common"" sendmail_enable=""NO"" sendmail_rebuild_aliases=""YES"" #Enable samba server samba_enable=""YES"" # Disable LPD lpd_enable=""NO"" # Enable CUPS cupsd_enable=""YES"" enable_linux=""YES"" # FSCK Enhancements fsck_y_enable=""YES"" background_fsck=""NO"" # tmpmfs Flags tmpmfs=""YES"" tmpsize=""800m"" tmpmfs_flags=""-S"" # Denyhosts Startup denyhosts_enable=""YES"" # powerd: adaptive speed while on AC power, adaptive while on battery power powerd_enable=""YES"" powerd_flags=""-a adaptive -b adaptive"" # set CPU frequency # enable HALd dbus_enable=""YES"" polkitd_enable=""YES"" hald_enable=""YES"" # Enables support for HPLIP hpiod_enable=""NO"" hpssd_enable=""NO"" # ntpdate is deprecated and will eventually be removed from the distribution since # the same functionality is available in ntpd(8). # Without ""ntpd_sync_on_start"" option, ntpd refuses to perform an # initial correction if the clock offset is too large. # ntpd_enable=""YES"" ntpd_sync_on_start=""YES"" # Enable the firewall pf_rules=""/etc/pf.conf"" pf_enable=""YES"" pf_flags="""" snddetect_enable=""YES"" mixer_enable=""YES"" bsdstats_enable=""YES"" keymap=""us.iso"" hostname=""pcbsd"" ifconfig_bge0=""DHCP"" ifconfig_bge0=""DHCP"" ------------------Loader File------------------------- linux_load=""YES"" vesa_load=""YES"" splash_pcx_load=""YES"" bitmap_load=""YES"" bitmap_name=""/boot/loading-screen.pcx"" hw.pci.allow_unsupported_io_range=""1"" hw.pci.allhw.pci.allow_unsupported_io_range=""1"" hw.ata.atapi_dma=""1"" autoboot_delay=""5"" ulpt_load=""YES"" if_nfe_load=""YES"" nvidia_load=""YES"" ------------------Free Space-------------------------- Filesystem 1M-blocks Used Avail Capacity Mounted on /dev/ad0s2a 11127 3220 7016 31% / devfs 0 0 0 100% /dev linprocfs 0 0 0 100% /compat/linux/proc /dev/md0 771 0 709 0% /tmp ------------------System Processes-------------------- last pid: 26313; load averages: 1.08, 0.64, 0.47 up 0+01:07:10 03:19:13 67 processes: 1 running, 66 sleeping Mem: 122M Active, 393M Inact, 141M Wired, 11M Cache, 110M Buf, 320M Free Swap: 512M Total, 512M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 26132 root 1 96 0 26416K 22468K select 0 0:01 1.08% kcmshell 26304 root 1 8 0 1256K 456K nanslp 1 0:00 1.00% sleep 9479 root 1 97 0 71932K 33344K select 0 0:38 0.93% Xorg 9664 lisette 1 96 0 20096K 15956K select 0 0:36 0.88% pbbattery 9681 lisette 1 96 0 25840K 21556K select 0 0:45 0.29% kdeinit 1016 root 1 8 0 1320K 900K nanslp 0 0:54 0.15% powerd 26090 lisette 1 103 0 25292K 20772K select 1 0:01 0.11% kdesu 17990 lisette 1 96 0 68872K 59452K select 0 0:31 0.10% kdeinit 977 root 1 8 0 1732K 1240K wait 1 0:17 0.05% sh 1112 root 1 96 0 1436K 880K select 1 0:15 0.00% moused 9642 lisette 4 20 -76 11908K 9096K kserel 0 0:15 0.00% artsd 9678 lisette 1 96 0 30420K 24204K select 0 0:11 0.00% kdeinit 9607 lisette 1 96 0 29188K 24124K select 0 0:09 0.00% kdeinit 938 haldaemon 1 96 0 4788K 3556K select 1 0:07 0.00% hald 9628 lisette 1 96 0 29748K 25780K select 0 0:06 0.00% kdeinit 9626 lisette 1 96 0 40312K 35840K select 0 0:05 0.00% kdeinit 945 root 1 96 0 2796K 1540K select 1 0:04 0.00% hald-addon-storage 9615 lisette 1 96 0 26292K 21376K select 0 0:04 0.00% kdeinit I hope this help in anyway. Bye" lisette 71 Incorret translation XOrg Configurator 1.4 System Defect KDE closed 2007-11-01T13:57:06-07:00 2007-11-06T01:38:22-08:00 "I found many incorrect pages in Russian translation on KDE 3.5.7 - KDE Info, KCron, ... e.t.c.. I check it and found unknown code page. Please, correct this error. Russian translation work at fronted only, ~ <= 60%. Russian (sorry my English) При работе в системе обнаружены многочисленные не переведённые места в RDE 3.5.7 например в интерфейсе планировщика KCron - переведены только заголовки полей, остальные буквы отображаются знаками ""?"". Данный дефект заметен в большинстве приложений. С системой на русском языке работать не возможно. Необходим повторный перевод." VictorVG 259 Xorg issues after upgrading to RC2 XOrg Configurator 8.0-RC2 System Defect kris closed 2010-02-19T09:11:46-08:00 2010-07-08T06:15:56-07:00 "After upgrading from 8-BETA to 8-RC2 (64bit) on my notebook I was stuck in the graphics setup program. I guess due to the update of xorg-server the screen was completely mangled and I could not regonize anything. With 8-BETA I didn't have any problems with it. The graphics chip is agp0: on vgapci0 The big problem was that I tried to kill the Xserver and configure it manually, but after killing the Server it just respawned, which also caused my working /etc/X11/xorg.conf was overwritten. After a lot of fiddeling I deleted /PCBSD/xorg-gui/.xsession-failed (or the like) and was presented a working X with the graphics setup program. I propose that theres an easier way to achieve this. :) Maybe pressing Esc exits the program? BTW: Switching virtual desktops in Fluxbox with Alt+Function Key should be disabled for the graphics setup." lme 335 Display setup wizard crashes with nvidia XOrg Configurator 8.1 System Defect closed 2010-07-23T04:42:49-07:00 2012-01-24T12:15:33-08:00 "Display configuration wizard crashes after accepting configuration with nvidia 256.35 driver leaving an empty /etc/tty, see ticket #294[[BR]] (Maybe it would be safer to overwrite /etc/tty only after critical operations are completed)[[BR]] Error ""link_elf_lookup_symbol missing symbol hash table"" displayed on boot while loading nvidia kernel module[[BR]] Installed nvidia-driver 195.36.15 from the ports or 256.35 from nvidia website work fine - thus (not only) a nvidia problem.[[BR]] Was working ok with 8.1-RC1, now crashing with 8.1" bitraptor 384 Display configuration fails XOrg Configurator 9.0-BETA1 System Defect closed 2011-09-08T14:15:10-07:00 2012-01-26T12:25:56-08:00 "after the first reboot when installer ask for your video card (i selected vesa and i was selected already) when you click on next system goes black screen and hangs. this happens even when you press skip button. Hardware: ibm t22 (512M ram) Desktop installed: Xfce" kuku 235 Switchable Graphic Card XOrg Configurator 8.0-RC System Enhancement closed 2010-02-03T19:23:42-08:00 2010-07-07T13:38:28-07:00 "I have ASUS UL30VT Laptop which have switchable graphic cards between Intel GMA4500 and NVIDIA G210M. Please provide the tools to choose correct graphic to be used in the XOrg. Right now I can't log on into XOrg due to graphic driver problem. I downloaded and installed latest nvidia driver (195.22) and it detects my video card ok. Any response will be appreciated." bebekmacho 109 Disable Hardware acceleration for nvidia legacy driver 71xx XOrg Configurator 1.4.1 7.0 System Enhancement closed 2008-03-11T12:36:22-07:00 2008-09-04T11:59:11-07:00 "When the nvidia-driver-71xx legacy driver is chosen, hardware acceleration should be disabled by default by adding {{{ Option ""RenderAccel"" ""False"" }}} in the Device section of the generated xorg.conf file. The reason being is that this driver is poor quality and buggy, and on three cards I've tested (TNT2 Pro, geforce 2 Ti , geforce 2 MX 400) having the acceleration enabled caused complete system crashes at random points. Given also that this driver is for old graphics cards, it may be considered that the composite extension is disabled by default also when this driver is chosen." pheet 171 Garbage on screen with two monitors XOrg Configurator 7.1 7.1.1 System Defect closed 2009-08-12T05:30:04-07:00 2010-07-07T12:32:43-07:00 "When X.ORG is not configured (installation and first run) I see only garbage on both monitors. When I disconnect one (DVI) monitor XServer starts normally. video: nVidia 6600GT with two LCD monitors " yurkis 250 user set screen resolution in X not used XOrg Configurator 8.0-RC System Defect closed 2010-02-13T17:30:19-08:00 2010-02-16T10:08:33-08:00 "VERSION:8.0-rc2x64 expected behavior: * if user changes resolution of screen then that resolution is the default for all future X sessions (including kdm and kde). summary to reproduce: * From Fresh install in vmware-fusion2 (on a mac). * open 'System Settings' from the k-menu. * select 'display'. * change resolution of screen to something other than 800x600 and select apply. * reboot (or simply logout) and resolution is back to 800x600. Hello, just installed PC-BSD for the first time within vmware-fusion2. i wanted to run a full resolution (1440x900) over the default 800x600. The change in resolution appled nicely. However, once i rebooted (or even logged out) the screen resolution was reset to the default 800x600. When logged into kde again, i opened up the display preferences again, the screen then automatically changed back to full resolution of 1440x900. (i.e. as soon i click on 'display' the settings loaded and changed screen resolutions). I'll attach the xorg.0.log. The last line of the log, seen below, was created when i double clicked 'display' in 'system preferences' and the screen changed resolution to 1440x900. (==) VMWARE(0): Write-combining range (0xa0000,0x10000) was already clear " bkn 110 Disable splash screen for nvidia drivers XOrg Configurator 1.4.1 7.0 System Enhancement closed 2008-03-11T12:40:15-07:00 2008-07-02T15:37:24-07:00 "When one of the proprietry nvidia drivers is chosen when running the xorg configurator, the following should be included in the Device section of the generated xorg.conf file: {{{ Option ""NoLogo"" ""True"" }}} This should disable the near-subliminal advertisment for nvidia everytime X is started." pheet