﻿id	summary	reporter	owner	description	type	status	priority	milestone	component	version	resolution	keywords	cc
615	No Sound	dbrons	kris	"Lo people,

I still have no sound since the first install of my PCBSD 9 ...

I tried all recommendations of User HandBooks and FAQ etc. ... but still doens't work.

What I have tried :

[QUOTE][I][B]dmesg[/B][/I] :

hdac0: <Intel 82801G High Definition Audio Controller> mem 0xd02c0000-0xd02c3fff irq 22 at device 27.0 on pci0
hdac0: HDA Codec #0: Analog Devices AD1981HD
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Analog Devices AD1981HD PCM #1 Digital> at cad 0 nid 1 on hdac0[/QUOTE]

[QUOTE][I][B]cat /dev/sndstat[/B][/I] :

FreeBSD Audio Driver (newpcm: 32bit 2009061500/i386)
Installed devices:
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> (play/rec) default
pcm1: <HDA Analog Devices AD1981HD PCM #1 Digital> (play)
[/QUOTE]

[QUOTE][B][I]cat /boot/loader.conf[/I][/B] :

snd_hda_load=""YES""[/QUOTE]

[QUOTE][B][I]kldload snd_hda[/I][/B] : 

kldload: can't load snd_hda: File exists[/QUOTE]

[QUOTE][B][I]cat /etc/sysctl.conf[/I][/B] :

dev.pcm.0.play.vchans=0
dev.pcm.0.rec.vchans=0
#hw.snd.default_auto=1
hw.snd.default_unit=0[/QUOTE]

[QUOTE]When settings [B][I]default_unit=1[/I][/B] :

Mixer vol      is currently set to 100:100
Mixer pcm      is currently set to 100:100

When settings [B][I]default_unit=0[/I][/B] :

Mixer vol      is currently set to 100:100
Mixer pcm      is currently set to 100:100
Mixer speaker      is currently set to 100:100
Mixer line      is currently set to 100:100
Mixer mic     is currently set to 100:100
Mixer cd      is currently set to 100:100
Mixer rec      is currently set to 100:100
Mixer igain      is currently set to 100:100
Mixer ogain      is currently set to 100:100
Mixer line1      is currently set to 100:100
Mixer monitor      is currently set to 100:100
Recording source: mic[/QUOTE]

In Gnome interface, I have an option to confiure the sound (near the horloge), when I try to configure:
Hardware : I found no device
Input : Input volume to Maximum, /dev/dsp0 (selected)
Output : Output volume to Maximum , /dev/dsp0 Stereo (selected), /dev/dsp1 Stereo.

Yesterday, when trying all configuration, I had a sound a low level sound. Like if you set the vol of your radio to 0,01. But the sound was there, and all my mixer was set to 100:100. I lost this conf and I can't hear not anymore.


Thanks for the help :)"	System Defect	closed	minor		System Configuration	9.0-RELEASE	fixed	sound	trac-bugs@…
