Changes between Version 1 and Version 2 of TracIni

08/23/10 11:39:44 (4 years ago)



  • TracIni

    v1 v2  
    4 Trac configuration is done by editing the '''`trac.ini`''' config file, located in `<projectenv>/conf/trac.ini`. 
     4Trac configuration is done by editing the '''`trac.ini`''' config file, located in `<projectenv>/conf/trac.ini`.  Changes to the configuration are usually reflected immediately, though changes to the `[components]` or `[logging]` sections will require restarting the web server. You may also need to restart the web server after creating a global configuration file when none was previously present. 
     6The `trac.ini` configuration file should be writable by the web server, as Trac currently relies on the possibility to trigger a complete environment reload to flush its caches. 
    68== Global Configuration == 
    8 Since version 0.9, Trac can also read the configuration from a global `trac.ini` file. These global options will then be merged with the environment-specific options, where local options override global options. 
     10In versions prior to 0.11, the global configuration was by default located in `$prefix/share/trac/conf/trac.ini` or /etc/trac/trac.ini, depending on the distribution. If you're upgrading, you may want to specify that file to inherit from.  Literally, when you're upgrading to 0.11, you have to add an `[inherit]` section to your project's `trac.ini` file. Additionally, you have to move your customized templates and common images from `$prefix/share/trac/...` to the new location. 
    10 The global configuration is by default localted in `$prefix/share/trac/conf/trac.ini`. It can be moved to a different location (for example, `/etc/trac.ini`), but that requires changing the file `trac/` which gets created when Trac is installed.  
     12Global options will be merged with the environment-specific options, where local options override global options. The options file is specified as follows: 
     15file = /path/to/global/trac.ini 
     17Multiple files can be specified using a comma-separated list. 
    12 == Reference == 
     19Note that you can also specify a global option file when creating a new project,  by adding the option `--inherit=/path/to/global/trac.ini` to [TracAdmin#initenv trac-admin]'s `initenv` command.  If you do not do this but nevertheless intend to use a global option file with your new environment, you will have to go through the newly generated `conf/trac.ini` file and delete the entries that will otherwise override those set in the global file. 
     21There are two more entries in the [[#inherit-section| [inherit] ]] section, `templates_dir` for sharing global templates and `plugins_dir`, for sharing plugins. Those entries can themselves be specified in the shared configuration file, and in fact, configuration files can even be chained if you specify another `[inherit] file` there. 
     23== Reference for settings 
    1425This is a brief reference of available configuration options. 
    18 == [components] == 
    19 (''since 0.9'') 
     29== Reference for special sections 
     32=== [components] === #components-section 
    2133This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to `enabled` or `on` will enable the component, any other value (typically `disabled` or `off`) will disable the component. 
    3648See also: TracPlugins 
    38   ''Note that prior to Trac r2335 (that applies to 0.9b1 and 0.9b2), you would use a `[disabled_components]` section instead. See a [ previous version] of this page for the details.'' 
     50=== [milestone-groups] === #milestone-groups-section 
     51''(since 0.11)'' 
     53As the workflow for tickets is now configurable, there can be many ticket states, 
     54and simply displaying closed tickets vs. all the others is maybe not appropriate  
     55in all cases. This section enables one to easily create ''groups'' of states  
     56that will be shown in different colors in the milestone progress bar. 
     58Example configuration (the default only has closed and active): 
     60closed = closed 
     61# sequence number in the progress bar 
     62closed.order = 0 
     63# optional extra param for the query (two additional columns: created and modified and sort on created) 
     64closed.query_args = group=resolution,order=time,col=id,col=summary,col=owner,col=type,col=priority,col=component,col=severity,col=time,col=changetime 
     65# indicates groups that count for overall completion  
     66closed.overall_completion = truepercentage 
     68new = new 
     69new.order = 1 
     70new.css_class = new 
     71new.label = new 
     73# one catch-all group is allowed 
     74active = * 
     75active.order = 2 
     76# CSS class for this interval 
     77active.css_class = open 
     78# Displayed label for this group 
     79active.label = in progress 
     82The definition consists in a comma-separated list of accepted status. 
     83Also, '*' means any status and could be used to associate all remaining 
     84states to one catch-all group. 
     86The CSS class can be one of: new (yellow), open (no color) or 
     87closed (green). New styles can easily be added using the following 
     88selector:  `table.progress td.<class>` 
     90=== [repositories] === #repositories-section 
     92(''since 0.12'' multirepos) 
     94One of the alternatives for registering new repositories is to populate the `[repositories]` section of the trac.ini. 
     96This is especially suited for setting up convenience aliases, short-lived repositories, or during the initial phases of an installation. 
     98See [TracRepositoryAdmin#Intrac.ini TracRepositoryAdmin] for details about the format adopted for this section and the rest of that page for the other alternatives. 
     100=== [svn:externals] === #svn:externals-section 
     101''(since 0.11)'' 
     103The TracBrowser for Subversion can interpret the `svn:externals` property of folders. 
     104By default, it only turns the URLs into links as Trac can't browse remote repositories. 
     106However, if you have another Trac instance (or an other repository browser like [ ViewVC]) configured to browse the target repository, then you can instruct Trac which other repository browser to use for which external URL. 
     108This mapping is done in the `[svn:externals]` section of the TracIni 
     1131 = svn://server/repos1                       http://trac/proj1/browser/$path?rev=$rev 
     1142 = svn://server/repos2                       http://trac/proj2/browser/$path?rev=$rev 
     1153 =       http://ourserver/viewvc/svn/$path/?pathrev=25914 
     1164 = svn://  http://ourserver/tracs/tools/browser/$path?rev=$rev 
     118With the above, the `svn://` external will be mapped to `http://ourserver/tracs/tools/browser/tags/1.1/tools?rev=` (and `rev` will be set to the appropriate revision number if the external additionally specifies a revision, see the [ SVN Book on externals] for more details). 
     120Note that the number used as a key in the above section is purely used as a place holder, as the URLs themselves can't be used as a key due to various limitations in the configuration file parser. 
     122Finally, the relative URLs introduced in [ Subversion 1.5] are not yet supported. 
     124=== [ticket-custom] === #ticket-custom-section 
     126In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details. 
     128=== [ticket-workflow] === #ticket-workflow-section 
     129''(since 0.11)'' 
     131The workflow for tickets is controlled by plugins.  
     132By default, there's only a `ConfigurableTicketWorkflow` component in charge.  
     133That component allows the workflow to be configured via this section in the trac.ini file. 
     134See TracWorkflow for more details. 
    41138See also: TracGuide, TracAdmin, TracEnvironment