Opened 4 years ago

Closed 4 years ago

#291 closed System Defect (fixed)

No /boot/loader error

Reported by: mjanosi Owned by: kris
Priority: major Milestone:
Component: Installer Version: 8.0
Keywords: Cc: trac-bugs@…

Description

I've tried to install from PCBSD8.0-x64-DVD.iso
numerous times and I'm getting No /boot/loader on the
reboot. I did a

cat /dev/acd0c > xx.iso

, then a

head -c 3516813312 xx.iso > yy.iso

to get rid of the extra bytes at the end of the image
and the md5 sums are the same, so it's not the DVD.
I also installed it on another machine at home, which
runs flawlessly. I read through the forum and tried
messing with BIOS options as suggested here:

http://forums.pcbsd.org/viewtopic.php?f=2&t=15273

I didn't have the Ultra DMA stuff, but changed AHCI -> ATA, then ATA -> Legacy to no avail.
The box is an

OPTIPLEX 755

real memory = 3487559680 (3325 MB)
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
(2394.00-MHz 686-class CPU)
ad0: 238418MB <Seagate ST3250310AS 3.ADA> at ata4-master SATA300

and runs PCBSD 7.1.1 just fine. I noticed a bunch of "Seek failed" (105169 of them) and "Write failed" (383 of them) errors on the install and I have attached the .tar-extract.log file.

Attachments (1)

tar-errors.txt (155.8 KB) - added by mjanosi 4 years ago.
Some of the errors from .tar-extract.log after install

Download all attachments as: .zip

Change History (24)

Changed 4 years ago by mjanosi

Some of the errors from .tar-extract.log after install

comment:1 Changed 4 years ago by mjanosi

BTW, I just installed from PCBSD8.0-x86-DVD.iso and everything works, so it looks like it's an x64 issue.

comment:2 Changed 4 years ago by kris

  • Resolution set to wontfix
  • Status changed from new to closed

Well, if it works on 32bit but not 64, then it sounds like something wrong on the loader on amd64 FreeBSD. If you want to debug this further, you'll need to grab a copy of vanilla FreeBSD 64bit, confirm it fails there, and then report the bug to the freebsd PR system:

http://www.freebsd.org/send-pr.html

if you get them enough details hopefully they can figure it out and fix :)

In the meantime marking this as "wontfix" because it needs to go upstream.

comment:3 Changed 4 years ago by mjanosi

I'm having trouble finding a vanilla FreeBSD 64bit iso, to download. Should I just try to install FreeBSD from the PC-BSD x64 DVD?

comment:4 Changed 4 years ago by kris

You'll want one of these:

ftp://ftp.freebsd.org/pub/FreeBSD/releases/amd64/ISO-IMAGES/8.0/

If you install their amd64 release and it works, then please let me know asap :)

comment:5 Changed 4 years ago by mjanosi

Sorry, I installed 8.0-RELEASE-amd64-bootonly.iso and it also worked fine.

comment:6 Changed 4 years ago by kris

  • Resolution wontfix deleted
  • Status changed from closed to reopened

Ok, reopening then. We've made a number of fixes to our installer, maybe it was something odd in there. Can you grab this snapshot?

ftp://ftp.pcbsd.org/pub/snapshots/8/

Download the amd64 ISO, and give it a whirl. Its a pre-release, but the installer seems to work much better than before. Also, report back any partitioning you may have done, or if you just took the defaults.

Thanks!

comment:7 Changed 4 years ago by mjanosi

I will try it, but I've already tried PCBSD8-STABLE-20100517-x64-DVD.iso, unsuccessfully, so unless you fixed something this past week, it'll probably fail. I took the defaults, but here is the output for fdisk:

* Working on device /dev/ad0 *
parameters extracted from in-core disklabel are:
cylinders=484406 heads=16 sectors/track=63 (1008 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=484406 heads=16 sectors/track=63 (1008 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 12 (0x0c),(DOS or Windows 95 with 32 bit FAT (LBA))

start 63, size 20980827 (10244 Meg), flag 0

beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 5/ sector 63

The data for partition 2 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)

start 20980890, size 31455270 (15359 Meg), flag 0

beg: cyl 1023/ head 255/ sector 63;
end: cyl 1023/ head 15/ sector 63

The data for partition 3 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)

start 52436160, size 435843072 (212814 Meg), flag 80 (active)

beg: cyl 1023/ head 255/ sector 63;
end: cyl 1023/ head 15/ sector 63

The data for partition 4 is:
<UNUSED>

No, thank you! I love PC-BSD and have been using it since 1.2 and even donated $50 to it a while back.

comment:8 Changed 4 years ago by mjanosi

PCBSD8-STABLE-20100524-x64-DVD.iso failed with the following pc-sysinstall.log:

# PC-SYSINSTALL LOG
Running: find-update-parts
mount: no : No such file or directory
kern.geom.debugflags: 0 -> 16
Running gpart modify on ada0s2
Running: gpart modify -t freebsd -i 2 ada0s2
gpart: index '2': No such file or directory
Error 1: gpart modify -t freebsd -i 2 ada0s2
Running: umount /cdmnt-install
umount: /cdmnt-install: statfs: No such file or directory
umount: /cdmnt-install: unknown file system
Trying DHCP on em0 <Intel(R) PRO/1000 Network Connection 7.0.5>

# PC-SYSINSTALL CFG
# Auto-Generated pc-sysinstall configuration
installInteractive=no
installMode=fresh
installType=PCBSD
packageType=uzip

# Doing PC-BSD Install make sure to start xorg-gui at first boot
runCommand=cp /usr/PCBSD/xorg-gui/conf/ttys.xsetup /etc/ttys
runCommand=sh /usr/PCBSD/Scripts/reset-firewall
installMedium=dvd
netSaveDev=AUTO-DHCP

# Timezone
timeZone=America/New_York
enableNTP=yes

# Keyboard Layout Options
localizeKeyModel=pc104
localizeKeyLayout=us

# Disk Setup for ada0
disk0=ada0
partition=s2
bootManager=none
commitDiskPart

# Partition Setup for ada0(s2)
# All sizes are expressed in MB
# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
# UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli
disk0-part=UFS+S 2048 /
disk0-part=SWAP 9472 none
disk0-part=UFS+S 1024 /var
disk0-part=UFS+S 2810 /usr
commitDiskLabel

# Optional Components
installComponents=

# Root Password
rootPass=fradi1

# Users
userName=mjanosi
userComment=Miklos Janosi
userPass=fradi1
userShell=/bin/csh
userHome=/home/mjanosi
userGroups=wheel,operator
autoLoginUser=mjanosi
commitUser

# DMESG OUTPUT
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-PRERELEASE #5: Wed May 19 15:05:55 UTC 2010

root@…:/usr/obj/storage/builds/pcbsd-build81-x64/fbsd-source/8-stable/sys/PCBSD amd64

Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2394.00-MHz K8-class CPU)

Origin = "GenuineIntel?" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant

real memory = 4294967296 (4096 MB)
avail memory = 3943510016 (3760 MB)
ACPI APIC Table: <DELL B9K >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)

cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3

ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL B9K > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
acpi_button0: enable wake failed
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xecc0-0xecdf mem 0xfebe0000-0xfebfffff,0xfebdb000-0xfebdbfff irq 21 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:21:9b:86:17:64
uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup? = 0x2f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup? = 0x2f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfebd9c00-0xfebd9fff irq 22 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci2: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at device 29.0 on pci0
uhci2: [ITHREAD]
usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at device 29.1 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus6: EHCI version 1.0
usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 5 on ahci0
ahcich4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd07ff,0xd0800-0xd2fff,0xd3000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
est0: <Enhanced SpeedStep? Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel?, msr 926092606000926
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep? Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel?, msr 926092606000926
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep? Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel?, msr 926092606000926
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep? Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel?, msr 926092606000926
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;

to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.

ZFS filesystem version 3
ZFS storage pool version 14
RTC BIOS diagnostic error 11<memory_size>
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 28672000 bytes at 0xffffffff81136258
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3250310AS 3.ADA> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
lapic1: Forcing LINT1 to edge trigger
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-H653F D200> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfersSMP: AP CPU #1 Launched! (
lapicSAT3A: 1.Fox,rc ing LINT1 to edge triggerUDMA5,
ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [1781616 x 2048 byte records]
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
Root mount waiting for: usbus6
Root mount waiting for: usbus6
ugen4.2: <Dell> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen6.2: <USB> at usbus6
umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 2> on usbus6
umass0: SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus6
ugen4.3: <vendor 0x413c> at usbus4
ums0: <vendor 0x413c Dell Premium USB Optical Mouse, class 0/0, rev 2.00/0.09, addr 3> on usbus4
ums0: 5 buttons and [XYZT] coordinates ID=0
umass0:5:0:-1: Attached to scbus5
Trying to mount root from ufs:/dev/ufs/ROOTFS
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Simple Flash Disk 2.0 2.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1991MB (4077568 512 byte sectors: 255H 63S/T 253C)
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
md7.uzip: 19006 x 65536 blocks
/tmp: optimization changed from SPACE to TIME
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
em0: link state changed to DOWN
em0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 done
All buffers synced.
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-PRERELEASE #5: Wed May 19 15:05:55 UTC 2010

root@…:/usr/obj/storage/builds/pcbsd-build81-x64/fbsd-source/8-stable/sys/PCBSD amd64

Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2394.00-MHz K8-class CPU)

Origin = "GenuineIntel?" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant

real memory = 4294967296 (4096 MB)
avail memory = 3943510016 (3760 MB)
ACPI APIC Table: <DELL B9K >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)

cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3

ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL B9K > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
acpi_button0: enable wake failed
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xecc0-0xecdf mem 0xfebe0000-0xfebfffff,0xfebdb000-0xfebdbfff irq 21 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:21:9b:86:17:64
uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup? = 0x2f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup? = 0x2f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfebd9c00-0xfebd9fff irq 22 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci2: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at device 29.0 on pci0
uhci2: [ITHREAD]
usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at device 29.1 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus6: EHCI version 1.0
usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 5 on ahci0
ahcich4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd07ff,0xd0800-0xd2fff,0xd3000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
est0: <Enhanced SpeedStep? Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel?, msr 926092606000926
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep? Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel?, msr 926092606000926
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep? Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel?, msr 926092606000926
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep? Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel?, msr 926092606000926
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;

to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.

ZFS filesystem version 3
ZFS storage pool version 14
RTC BIOS diagnostic error 11<memory_size>
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 28672000 bytes at 0xffffffff81136258
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3250310AS 3.ADA> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
lapic1: Forcing LINT1 to edge trigger
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-H653F D200> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfersSMP: AP CPU #1 Launched! (
lapicSA2T:A Fo1rc.xin, g LINT1 to edge triggerUDMA5,
ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [1781616 x 2048 byte records]
SMP: AP CPU #2 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
Root mount waiting for: usbus6 usbus2
uhub2: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
Root mount waiting for: usbus6
ugen4.2: <Dell> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen6.2: <USB> at usbus6
umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 2> on usbus6
umass0: SCSI over Bulk-Only; quirks = 0x0000
ugen4.3: <vendor 0x413c> at usbus4
ums0: <vendor 0x413c Dell Premium USB Optical Mouse, class 0/0, rev 2.00/0.09, addr 3> on usbus4
ums0: 5 buttons and [XYZT] coordinates ID=0
umass0:5:0:-1: Attached to scbus5
Trying to mount root from ufs:/dev/ufs/ROOTFS
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Simple Flash Disk 2.0 2.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1991MB (4077568 512 byte sectors: 255H 63S/T 253C)
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
md7.uzip: 19006 x 65536 blocks
/tmp: optimization changed from SPACE to TIME
em0: link state changed to DOWN
em0: link state changed to UP

# DISK INFO ada0
/dev/ada0
/dev/ada0s1
/dev/ada0s2
/dev/ada0s2a
/dev/ada0s2d
/dev/ada0s2e
/dev/ada0s2f
/dev/ada0s3
/dev/ada0s3a
/dev/ada0s3b
=> 63 488281185 ada0 MBR (233G)

63 20980827 1 !12 (10G)

20980890 31455270 2 freebsd (15G)
52436160 435843072 3 freebsd [active] (208G)

488279232 2016 - free - (1.0M)

# DISK INFO da0
/dev/da0
/dev/da0s1
=> 63 4077486 da0 MBR (1.9G)

63 4077486 - free - (1.9G)

# MOUNT OUTPUT
/dev/ufs/ROOTFS on / (ufs, local)
devfs on /dev (devfs, local, multilabel)
/dev/md6 on /tmp (ufs, local)
/dev/md2 on /uzip (ufs, local)
/dev/md7.uzip on /usr (ufs, local, read-only)
/root/SysInstaller on /usr/PCBSD/SysInstaller (nullfs, local)
/root/pc-sysinstall on /usr/PCBSD/pc-sysinstall (nullfs, local)
/dev/da0s1 on /root/mnt (msdosfs, local)

comment:9 follow-up: Changed 4 years ago by kris

Thanks for the bug report, that was my bad, fixed it in SVN here:

http://trac.pcbsd.org/changeset/6798

If you want to try it with the existing snapshot, you can copy that file, or just make the mods by hand before performing the install.

Also, when you are doing an amd64 install, is the installation actually fully finishing? I.E. do you get to the GUI screen where you have to click "finish" and then it reboots? Or are you just coming back later and finding that the system has automatically rebooted to the DVD again?

I'm asking because I'm seeing an issue here on amd64 on certain chipsets, where the kernel panics during the install because of DMA write errors, but on the same system i386 works like a champ. The install will get to about 98%, then kernel panic and reboot without finishing, and thus no boot files, which are at the very end of the install archive.

comment:10 in reply to: ↑ 9 Changed 4 years ago by mjanosi

Replying to kris:

Thanks for the bug report, that was my bad,

No problem.

Also, when you are doing an amd64 install, is the installation actually fully finishing?

Yes, it's fully finishing.

I.E. do you get to the GUI screen where you have to click "finish" and then it reboots?

Yes.

Or are you just coming back later and finding that the system has automatically rebooted to
the DVD again?

No automatic reboots on this box, although it does automatically reboot on my macbook, but
it's a different issue, since it reboots before ever getting to the installer.

I'm asking because I'm seeing an issue here on amd64 on certain chipsets, where the kernel panics during the install because of DMA write errors, but on the same system i386 works like a champ. The install will get to about 98%, then kernel panic and reboot without finishing, and thus no boot files, which are at the very end of the install archive.

comment:11 Changed 4 years ago by mjanosi

Well I tried again after replacing functions-disk.sh and it still fails, although
pc-sysinstall.log is smaller:

Running: find-update-parts
mount: no : No such file or directory
kern.geom.debugflags: 0 -> 16
Running gpart modify on ada0
Running: gpart modify -t freebsd -i 2 ada0
ada0s2 modified
Cleaning up ada0s2
Running: dd if=/dev/zero of=/dev/ada0s2 count=1024
1024+0 records in
1024+0 records out
524288 bytes transferred in 0.107301 secs (4886143 bytes/sec)
NEWFS: /dev/ada0s2a - UFS+S
Running: newfs -U /dev/ada0s2a
/dev/ada0s2a: 2048.0MB (4194304 sectors) block size 16384, fragment size 2048

using 12 cylinder groups of 183.72MB, 11758 blks, 23552 inodes.
with soft updates

super-block backups (for fsck -b #) at:

160, 376416, 752672, 1128928, 1505184, 1881440, 2257696, 2633952, 3010208,
3386464, 3762720, 4138976

Running: sync
Running: glabel label rootfs0 /dev/ada0s2a
Running: sync
Running: sync
Running: glabel label swap0 /dev/ada0s2b
Running: sync
NEWFS: /dev/ada0s2d - UFS+S
Running: newfs -U /dev/ada0s2d
/dev/ada0s2d: 1024.0MB (2097152 sectors) block size 16384, fragment size 2048

using 6 cylinder groups of 183.72MB, 11758 blks, 23552 inodes.
with soft updates

super-block backups (for fsck -b #) at:

160, 376416, 752672, 1128928, 1505184, 1881440

Running: sync
Running: glabel label var0 /dev/ada0s2d
Running: sync
NEWFS: /dev/ada0s2e - UFS+S
Running: newfs -U /dev/ada0s2e
/dev/ada0s2e: 2810.0MB (5754880 sectors) block size 16384, fragment size 2048

using 16 cylinder groups of 183.72MB, 11758 blks, 23552 inodes.
with soft updates

super-block backups (for fsck -b #) at:

160, 376416, 752672, 1128928, 1505184, 1881440, 2257696, 2633952, 3010208,
3386464, 3762720, 4138976, 4515232, 4891488, 5267744, 5644000

Running: sync
Running: glabel label usr0 /dev/ada0s2e
Running: sync
mount -o rw /dev/ada0s2a -> /mnt/
Running: mount -o rw /dev/ada0s2a /mnt/
swapon ada0s2b
Running: swapon /dev/ada0s2b
mount -o rw /dev/ada0s2d -> /mnt/var
Running: mount -o rw /dev/ada0s2d /mnt/var
mount -o rw /dev/ada0s2e -> /mnt/usr
Running: mount -o rw /dev/ada0s2e /mnt/usr
FOUND DVD: /dev/cd0
pc-sysinstall: Starting Extraction
pc-sysinstall: Extraction Finished
Running chroot command: /usr/bin/cap_mkdb /etc/login.conf
Setting em0 to DHCP on the system.
Running chroot command: cat /.tmpPass | pw useradd -n mjanosi -c "Miklos Janosi" -h 0 -s "/bin/csh" -m -d "/home/mjanosi" -G "wheel,operator"
Running: rm /mnt/.tmpPass
Running chroot command: cp /usr/PCBSD/xorg-gui/conf/ttys.xsetup /etc/ttys
Running chroot command: sh /usr/PCBSD/Scripts/reset-firewall
Setting hostname: pcbsd-7405
Setting root password
Running chroot command: cat /.rootpw | pw usermod root -h 0
Running: rm /mnt/.rootpw

comment:12 follow-up: Changed 4 years ago by kris

Well, according to this log, the install finished and it looks good. Did it actually return an error code during the installation after setting the root password? Usually when it gets to that point its finished.

comment:13 in reply to: ↑ 12 Changed 4 years ago by mjanosi

Replying to kris:

Well, according to this log, the install finished and it looks good.
Did it actually return an error code during the installation after setting the root password?

No error code, just can't boot to the 2nd partition: No /boot/loader error

comment:14 follow-up: Changed 4 years ago by kris

This really just plain odd. To recap, this is dual-booted with windows or Linux? Also, you are trying to use the standard FreeBSD MBR, which is "F1 - Dos F2 - BSD" right?

After installing x64 version, what happens if you use GAG as a boot-loader? http://gag.sourceforge.net/

comment:15 in reply to: ↑ 14 Changed 4 years ago by mjanosi

Replying to kris:

This really just plain odd. To recap, this is dual-booted with windows or Linux?

Windows (actually just DOS (for firmware upgrades) and 2 PC-BSD (I learned my lesson
with a botched upgrade so I try it 1st now)

Also, you are trying to use the standard FreeBSD MBR, which is "F1 - Dos F2 - BSD" right?

Yes.

After installing x64 version, what happens if you use GAG as a boot-loader?
http://gag.sourceforge.net/

I guess I could try it, but /boot is empty, so it's sure to fail.

comment:16 follow-up: Changed 4 years ago by kris

Ok, hold up there :)

So, if you boot the system, and run (#mount /dev/ad0s2a /mnt), cd over to /mnt/boot and do a listing. Is that folder completely empty?

If you run "df -h" with that partition mounted, does it show 2GB as the size properly? I'm wondering if we ran out of room, which is one of the only reasons why /boot would be empty. The extraction didn't return a failure though, which it should do if we run out of space on a partition.

comment:17 in reply to: ↑ 16 Changed 4 years ago by mjanosi

Replying to kris:

Ok, hold up there :)

So, if you boot the system, and run (#mount /dev/ad0s2a /mnt), cd over to /mnt/boot and do a
listing. Is that folder completely empty?

Yes

If you run "df -h" with that partition mounted, does it show 2GB as the size properly?

Nope:

Filesystem Size Used Avail Capacity Mounted on
/dev/ad0s2a 1.9G 17M 1.8G 1% /usr/home/mjanosi/mnt

comment:18 follow-up: Changed 4 years ago by kris

Wow, only 17M? No wonder, we are missing a TON of stuff.

Is there a /mnt/.tar-extract.log file? If so can you open it and see any errors? (look for "tar:" string) How about /boot stuff, does it show it being extracted?

comment:19 in reply to: ↑ 18 Changed 4 years ago by mjanosi

Replying to kris:

Wow, only 17M? No wonder, we are missing a TON of stuff.

Is there a /mnt/.tar-extract.log file?

There sure is.

If so can you open it and see any errors?
(look for "tar:" string)

The last 2 lines are:

tar: (Empty error message)
tar: Error exit delayed from previous errors.

And there's lots of Seek failed(105721) and Write failed(117) errors
that started at line 167447 of 273650 [61%].

How about /boot stuff, does it show it being extracted?

They are all Seek failed like the following:

x ./boot/boot0: Seek failed
x ./boot/loader.rc: Seek failed
x ./boot/firmware/: Seek failed
.
.
.
x ./boot/modules/linker.hints: Seek failed
x ./boot/modules/cuse4bsd.ko: Seek failed
x ./boot/modules/pwc.ko: Seek failed

comment:20 follow-up: Changed 4 years ago by kris

Well, that explains it all :)

The seek-failed errors seem to indicate a problem reading from the DVD during the file-extraction phase. I bet if you do an install, and run the command "dmesg" afterwards before rebooting, you'll see all kinds of kernel messages about read failures. I'm thinking this means we have a bad disk / drive. When you boot the install DVD, and let it do the full integrity check does it pass?

comment:21 in reply to: ↑ 20 Changed 4 years ago by mjanosi

Replying to kris:

Well, that explains it all :)

The seek-failed errors seem to indicate a problem reading from the DVD during the file-
extraction phase. I bet if you do an install, and run the command "dmesg" afterwards before
rebooting, you'll see all kinds of kernel messages about read failures. I'm thinking this
means we have a bad disk / drive. When you boot the install DVD, and let it do the full
integrity check does it pass?

Think again. Not only, does the DVD pass, but like in my 1st post the md5 sum matches when I do:

cat /dev/acd0 > xx.iso

then a

head -c 3648724992 xx.iso > yy.iso

MD5 (yy.iso) = f51fb7b78d4f9483840d0e51fe34dd66

I won't be able to tell you until I get home and try it, but I bet it installs flawlessly on the pc I have at home and don't forget the i386 DVD also installs flawlessly on this machine.

comment:22 Changed 4 years ago by mjanosi

Well, I'm home and I'm glad I didn't bet, the upgrade reboots during the installation and yes the DVD passes the integrity check.

comment:23 Changed 4 years ago by mjanosi

  • Resolution set to fixed
  • Status changed from reopened to closed

Sorry Kris, close this one down. A BIOS upgrade fixed this issue.

Note: See TracTickets for help on using tickets.